MGS and CGS Chassis Configuration Notes and Microcode Release Notes

• Installing the CSC-MT Enhanced Memory Card

• Installing the Nonvolatile Memory Card Applique

• Serial Port Communications Interface (SCI)

• Installing and Configuring the Hardware Type 1.1 CSC-MCI

• Installing and Upgrading the CSC/3 Processor Card

• Upgrading MCI Cards from Microcode Versions 1.5-1.10

• Installing and Configuring the CSC-R16M TR Interface Card

• Upgrading the CSC-R16M Microcode to Version 3.4

• SCI ucode 1.4

• Installing the 10BaseT Ethernet Transceiver Applique

• Installing the X.21 Dual-Mode Serial Applique

• Installing and Upgrading the CSC/4 Processor Card

• Installing and Upgrading the CSC-CCTL2 Card

• Installing and Configuring the CSC-MC+ Flash Card

• Installing and Configuring the Dual-Port Token Ring Interface Ca

• Installing and Configuring the Single-Port Token Ring Interface

• Installing the G.703 Applique

• Installing the High-Density V.35 Applique and Interface Cable

• Installing the RS-232, RS-232 NRZI (SDLC), and RS-449 Synchronou

• Upgrading the Serial Port Communications Interface (SCI) Card to

• Upgrading the MAS-23 Power Supply to the MAS-28

• Installing the MAS-28 Power Supply

• Upgrading the MAS-21 Power Supply to the MAS-28

• Replacing the MAS-20 Muffin Fan

• Installing the MAS-26 Power Supply in the M Chassis

• Installing the Slide Mount Kit on the M Chassis

• Replacing the Multibus Backplane in the M and C Chassis