|
|
Table Of Contents
Numerics - A - B - C - D - E - F - G - H - I - K - L - M - N - O - P - R - S - T - U - V - W -
Index
Numerics
10-Gbps ITU trunk cards
interface problems 9-3to 9-5, 10-3to 10-5
interfaces (figure) 9-1
loopbacks 9-5to 9-7, 10-6to 10-7
overview 9-1
troubleshooting checklist 9-3, 10-3
10-Gbps ITU tunable trunk cards
interfaces (figure) 10-1
overview 10-1
10-Gbps uplink cards
interface problems 11-2to 11-3
interfaces (figures) 11-1
troubleshooting checklist 11-2
2.5-Gbps ITU trunk cards
interfaces (figures) 8-1
troubleshooting checklist 8-2, 12-2
waveethernetphy interface problems 8-3
4-port 1-Gbps/2-Gbps FC aggregation cards
asymmetric throughput 5-9
client equipment problems 5-5
flow control is inactive 5-10
interface problems 5-3to 5-7, ??to 5-10
interfaces (figure) 5-2
low throughput 5-8
oversubscription problems 5-10
superportgroup problems 5-10
troubleshooting checklist 5-2
twogigabit interface problems 5-7
twogigabitphy interface not created 5-7
twogigabitphy interface problems 5-3, 5-5
twogigabitphy interface reports Loss of Sync 5-8
8-port FC/GE aggregation cards
client equipment problems 6-5
GE problems 6-3
gigabit interface problems 6-8
gigabitphy interface not created 6-8
gigabitphy interface problems 6-4, 6-6
interfaces (figure) 6-2
troubleshooting checklist 6-2
8-port multi-service muxponders
interfaces (figure) 7-2
overview 7-1
troubleshooting
multirate interface problems 7-2to 7-6
sdcc interface problems 7-8
wavesonetphy interface problems 7-7to 7-8
troubleshooting checklist 7-2
TSI mapping problems 7-9
A
accessibility tests 1-8
APS
bidirectional problems 15-2
group not associated 15-2
interfaces down 15-6
lockout fails 15-4
message channel problems 15-3
switchover fails 15-4, 15-5, 15-6
transmit k1k2 sf-lp 15-6
troubleshooting checklist 15-1
troubleshooting problems 15-2to 15-7
Automatic Protection Switching. See APS
B
bit error rate tester 1-5
booting
redundant CPU switch modules 2-15
Bug Toolkit
searching DDTS database 1-17
C
Cisco.com
uploading files to A-3
Cisco IOS images. See system images
Cisco Transport Manager. See CTM 1-4
CiscoView 1-4
client equipment problems
configuring online diagnostic tests 1-9to 1-16
CPU switch modules
active CPU switch module boot failure 2-22
console cannot be accessed 2-23
displaying configuration 2-2
overview 2-1
recovering passwords 2-4
software compatibility 2-13
standby CPU switch module boot failure 2-23
troubleshooting checklist 2-2
troubleshooting memory 2-9
troubleshooting redundant 2-15
unable to access enable mode 2-23
verifying 2-2
verifying hardware and software compatibility 2-13
verifying hardware and software versions 2-9
verifying NME interface configurations 2-5
CTM 1-4
customer service and support. See TAC
D
DDTSs
using Bug Toolkit 1-17
debug commands
cautions 1-7
ping command 1-7
traceroute command 1-7
debug diag online command 1-9
DFM 1-5
diagnostic commands
diag online subslot command 1-9
documentation
related xxi
E
echo messages. See ICMP echo messages
error message logging. See message logging
ESCON aggregation cards
client side interface problems 4-3, 4-4
esconphy interface not created 4-6
esconphy interface problems 4-4
interfaces 4-1
interfaces (figure) 4-2
overview 4-1
signal path (figure) 4-1, 14-1
traffic flow problems 4-5
troubleshooting checklist 4-2
using loopbacks 4-7
esconphy interfaces
all client side lasers down 4-4
not created 4-6
removing SFP optics 4-3
shutting down 4-3
unexpectedly shuts down 4-4
ethernetdcc interfaces down
10-Gbps ITU trunk cards 9-5, 10-5
10-Gbps uplink cards 11-3
2.5-Gbps ITU trunk cards 8-5
OSC modules 16-2
F
facility loopbacks 5-16, 6-11, 7-10, 7-11, 8-5, 8-6
fiber microscope 1-5
fixed attenuators 1-5
FTP
sending data to TAC A-3
G
general troubleshooting
internetwork maps 1-4
problem-solving models (figure) 1-3
problem-solving steps 1-3
gigabitphy interfaces
administratively down 6-4
CRC errors 6-7
local and remote down 6-8
Loss of Sync 6-3
not created 6-8
transmit frame count not incrementing 6-6
H
hardware
confirming integrity of 1-18
I
ICMP echo messages 1-7
Internet Control Message Protocol echo messages. See ICMP echo messages
internetwork maps. See network maps
K
Kermit protocol
providing data to TAC A-3
L
LEDs
VOA module problems 14-6
logging command A-2
M
Macintosh
logging system output A-2
maintaining network information 1-4
memory
troubleshooting CPU switch module 2-9
message logging
choosing destinations A-2
syslog servers A-2
N
tools supported 1-4
network management Ethernet ports. See NME
network maps
preparing for failures 1-4
network monitoring
CiscoView 1-4
network monitors 1-6
network performance
debug commands (caution) 1-7
displaying interface configurations 2-5
troubleshooting connections 2-5
no debug all command 1-7
no debug command 1-7
O
OADM modules
architecture (figure) 12-2
description 12-1
OIR tests 1-9
online diagnostics
accessibility tests 1-8
displaying 1-10
displaying configuration 1-10, 1-12
optical cleaning kit 1-5
optical power meter 1-5
optical supervisory channel
overview 16-1
optical time domain reflector/reflectometer 1-5
OSC modules
ethernetdcc interface is down 16-2
line protocol is down 16-2
overview 16-1
troubleshooting checklist 16-1
wave interface is down 16-2
P
passwords
patch cables 1-5
PB-OE modules
interfaces (figure) 14-2, 14-3
STA LED problems 14-6
troubleshooting checklist 14-3
voafilterin subinterface problems 14-4
warnings not reported 14-6
PCs
logging system output A-2
performance. See network performance
performance history counters
description 18-1
interpreting messages 18-2
not preserved across CPU switchovers 18-3
some counters are not displayed 18-2
troubleshooting checklist 18-1
problem solving
process 1-3
Protection switch module. See PSM
PSM
interface problems 13-1
troubleshooting checklist 13-1
R
recovering passwords 2-4
redundancy
troubleshooting CPU switch modules 2-15to 2-22
release notes
checking for workarounds 1-17
remote terminals
logging system output A-2
S
script command (UNIX) A-2
security password recovery 2-4to 2-5
SFP optics
8-port FC/GE aggregation cards 6-1
show buffers command 1-6, 2-9, 2-23, A-1
show controllers command 1-6, 2-6, 2-7, 5-11, 6-9, A-2
show flash command 1-6
show hardware detail command 2-16
show interfaces command 1-6, 2-6, 3-4, 3-5, 3-6, 3-8, 4-2, 4-5, 5-2, 5-4, 5-5, 5-6, 5-7, 6-2, 6-5, 6-6, 6-7, 6-8, 7-6, 8-2, 8-3, 8-4, 8-5, 9-3, 9-4, 9-5, 10-3, 10-4, 10-5, 11-2, 11-3, 12-2, 12-3, 14-3, 14-4, 14-5, 14-6, 15-1, 15-3, 15-5, 15-7, 16-2, 17-1
show memory command 1-6, 2-9, A-2
show processes command 1-6, A-2
show redundancy capability command 2-16
show running-config command 1-6, 2-2, 12-3, 17-4, A-1
show startup-config command 1-6, 2-5
show tech-support command A-1
show version command 1-7, 2-4, 2-9, 2-16, A-1
software
checking for bug workarounds 1-16
compatibility 2-13
downloading from Cisco.com 2-22
verifying versions 2-9
spectrum analyzer 1-6
SPF optics
ESCON aggregations cards 4-1
switch fabric 2-1
syslog servers A-2
system images
checking release notes 1-16
T
TAC
contacting A-2
providing data to A-3
show tech-support command A-1
Technical Assistance Center. See TAC
tengigethernetphy interfaces
Loss of Lock 11-3
Loss of Sync 11-3
terminal loopbacks 5-16, 5-17, 6-11, 6-12, 7-10, 8-5, 8-6, 9-5, 9-6, 10-6, 10-7, 11-4, 11-5
terminals. See remote terminals
64b66b CVRD alarm 17-3
8b10b CVRD alarm 17-1
B1 CVRD alarm 17-3
CDL HEC alarm 17-2
continuous threshold exceeded messages 17-4
troubleshooting checklist 17-1
time domain reflectometer 1-5
traceroute command 1-8
transparent interfaces
Loss of Frame 3-6
Loss of Light 3-4
Loss of Lock 3-5
Loss of Sync 3-5
transponder line cards
architecture 3-2
interfaces 3-2
Loss of Frame 3-6
Loss of Lock 3-5
Loss of Sync 3-5
low alarm 3-6
not listed 3-3
overview 3-1
rejects clock rate 3-6
rejects protocol encapsulation 3-6
troubleshooting checklist 3-2
troubleshooting checklists
10-Gbps ITU trunk cards 9-3, 10-3
10-Gbps uplink cards 11-2
2.5-Gbps ITU trunk cards 8-2, 12-2
4-port 1-Gbps/2-Gbps FC aggregation cards 5-2
8-port FC/GE aggregation cards 6-2
8-port multi-service muxponders 7-2
APS 15-1
CPU switch modules 2-2
ESCON aggregation cards 4-2
OSC 16-1
PSM 13-1
threshold alarms 17-1
transponder line cards 3-2
VOA modules 14-3
troubleshooting tools
bit error rate tester 1-5
fiber microscope 1-5
fixed attenuators 1-5
network monitors 1-6
optical cleaning kit 1-5
optical power meter 1-5
optical time domain reflector/reflectometer 1-5
patch cables 1-5
spectrum analyzer 1-6
time domain reflectometer 1-5
twogigabitphy interfaces
administratively down 5-3
asymmetric throughput 5-9
CRC errors 5-6
flow control is inactive 5-10
local and remote down 5-7
Loss of Sync 5-8
low throughput 5-8
not created 5-7
transmit frame count not incrementing 5-5
U
UNIX
logging system output A-2
script command A-2
V
voafilterin subinterfaces
high optical threshold error 14-5
low optical threshold error 14-4
voain interfaces
high optical threshold error 14-5
low optical threshold error 14-4
VOA modules
interface problems 14-3
interfaces (figure) 14-1, 14-2
STA LED problems 14-6
troubleshooting checklist 14-3
types 14-1
warnings not reported 14-6
W
waveethernetphy interfaces
10-Gbps ITU trunk cards
2.5-Gbps ITU trunk cards
Loss of Lock 8-3
Loss of Sync 8-3
wave interfaces
Loss of Frame 3-6
Loss of Light 3-3
Loss of Lock 3-5
Loss of Sync 3-5
wavepatch interfaces
Loss of Light 3-4
low alarm 3-6
wavesonetphy interfaces
Loss of Frame 7-8
Loss of Lock 7-7
Loss of Signal 7-7
WB-VOA modules
interfaces (figure) 14-1, 14-2
STA LED problems 14-6
troubleshooting checklist 14-3
voain interface problems 14-4, 14-5
warnings not reported 14-6
workarounds
checking release notes 1-16
Posted: Mon Mar 20 03:02:01 PST 2006
All contents are Copyright © 1992--2006 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.