Table Of Contents

Numerics - A - B - C - D - E - F - G - H - I - L - M - N - O - P - R - S - T - U - V - W - Y -

Index

Numerics

2-minute blower failure shutdown

See blower, shutdown

2-minute fan failure shutdown

See fan, shutdown

2-post equipment racks 2-20

A

AC-input

power supply

installation, Cisco 7505 5-13to 5-14

installation, Cisco 7507 and Cisco 7507-MX 3-14to 3-19

installation, Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-27to 3-31

LEDs 8-23to 8-26

removal, Cisco 7507 and Cisco 7507-MX 6-3to 6-6

removal, Cisco 7513, Cisco 7513-MX, and Cisco 7576 7-3to 7-5

specifications

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

acronyms, definition 1-2

agency approvals

Cisco 7505 1-6

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

airflow

clearance

for circulation around Cisco 7505 2-17

for circulation around Cisco 7507 and Cisco 7507-MX 2-19

for circulation around Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-22

considerations

Cisco 7505 2-13

Cisco 7507 and Cisco 7507-MX 2-14

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-14

filter cleaning 6-10

specifications

Cisco 7505 1-6

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

altitude specifications, system 2-13

AppleTalk, configuring 4-14

arbiter 1-50

arbitration, CyBus 1-50

AUSTEL agency approvals, Cisco 7505 1-6

Autoinstall configuration, basic 4-11

auxiliary port

connecting devices to 3-32

description 1-44

pinout 1-45

B

backplane

bandwidth

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

cover removal

Cisco 7505 5-9

Cisco 7513, Cisco 7513-MX, and Cisco 7576 7-13

description, Cisco 7505 1-4

power distribution 5-2, 8-5, 8-13

wiring 5-2, 6-2, 7-2

backup batteries 1-43

banner, system 4-2, 8-6, 8-14

batteries, lithium backup for NVRAM 1-43

blower

assembly

description 1-52

replacement in the Cisco 7507 and Cisco 7507-MX 6-15

failure 2-31, 2-35, 8-13

module

description 1-53, 7-10

operating voltages 8-13

replacement in the Cisco 7513, Cisco 7513-MX, and Cisco 7576 7-10

shutdown 2-31, 2-35

board racks, using 3-20

boot command 4-3

booting for the first time 4-8

bootload-failure response 4-7

boot system command 4-4

boot system flash command 4-26

bracket, cable-management

Cisco 7505 3-9

Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-26

Break key (interrupt) 4-6

broadcast address destination, configuration register settings 4-6

bus

See CyBus

C

cable-management bracket

Cisco 7505 3-9

Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-26

cables

AC-input power

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

attaching

console and auxiliary 3-32to 3-33

power 3-31

auxiliary port 1-45

avoiding crossing 3-2

console port 1-45

DC-input power

Cisco 7505 1-6

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

distance limitations 2-11

interference 2-10

power 5-13

Cisco 7505 2-8

Cisco 7507 and Cisco 7507-MX 2-8

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-9

power supply

Cisco 7505 1-6

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

retention clip, power 5-13

safety guidelines 2-3

swapping power 8-11, 8-15

ungrounded and uninsulated 2-3

Y-types for RSP2, RSP4, and RSP8 1-45

card cage assembly replacement, Cisco 7513, Cisco 7513-MX, and Cisco 7576 7-5

CD-ROM, ordering documentation 4-32

chassis

airflow considerations

Cisco 7505 2-13

Cisco 7507 and Cisco 7507-MX 2-14

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-14

clearance

Cisco 7505 2-17

Cisco 7507 and Cisco 7507-MX 2-19

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-22

dimensions

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

environment 2-12

feet, Cisco 7505 2-16

footprint 2-17, 2-21

internal components 5-2, 6-2, 6-11, 7-2

lifting safely 2-3, 2-5

panels, removing 6-6

slot arrangement

Cisco 7505 1-3

Cisco 7507 1-6

Cisco 7507-MX 1-11

Cisco 7513 1-15

Cisco 7513-MX 1-20

Cisco 7576 1-25

specifications

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

temperature thresholds 2-24to 2-25

voltage thresholds 2-24to 2-25

weight

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

chassis interface

description 1-50

replacement

Cisco 7505 5-11

Cisco 7507 and Cisco 7507-MX 6-12

Cisco 7513, Cisco 7513-MX, and Cisco 7576 7-14

CI

See chassis interface

Cisco 7505

additional information, obtaining 4-32

arbiter 1-50

cable connections, RSP 3-32to 3-33

chassis airflow 2-13

chassis interface

description 1-50

replacement 5-11

common RSP features 1-42

fan tray

description 1-52

replacement procedures 5-5

Flash memory, using 4-20to 4-32

installation

preparation 2-1to 2-29

procedures 3-4to 3-11

interface processor description 1-54

maintenance procedures ??to5-14

overview 1-3to??

power supply

connection 3-9

descriptions 1-47

guidelines 2-7

LEDs 8-23

removal 5-13

replacement 5-15

rack-mounting

guidelines 2-16, 2-18

procedure 3-7

removing

backplane cover 5-9

chassis interface 5-11

cover panels 5-3

fan tray 5-5

power harness cover 5-7

power supply 5-13

replacing

backplane cover 5-10

chassis interface 5-12

cover panel 5-4

fan tray 5-7

power harness cover 5-8

power supply 5-15

RSP4

description 1-33to 1-35

LEDs 8-22

RSP4 and RSP8

DRAM, upgrading 9-5to 9-11

safety recommendations 2-2

site environment guidelines 2-12to 2-29

system software

description 1-56

troubleshooting

cooling subsystem 8-7

guidelines 8-4

power subsystem 8-7

startup problems 8-4to 8-6

wiring guidelines 2-10

Cisco 7507

arbiter 1-50

overview 1-6to??

RSP2

DRAM, upgrading 9-2to 9-5

RSP4

description 1-33to 1-35

RSP4 and RSP8

DRAM, upgrading 9-5to 9-11

Cisco 7507 and Cisco 7507-MX

additional information, obtaining 4-32

blower

description 1-52

replacement 6-15

cable connections, RSP 3-32to 3-33

chassis airflow 2-14

chassis interface

description 1-50

replacement 6-12

common RSP features 1-42

Flash memory, using 4-20to 4-32

installation

preparation 2-1to 2-31

procedures 3-11to 3-19

interface processor description 1-54

maintenance procedures 6-1to 6-19

power supply

connection 3-17

descriptions 1-47

guidelines 2-8

installation 3-14

LEDs 8-23

removing

air filter 6-10

blower 6-15

chassis interface 6-12

cover panels 6-6

LED board 6-13

power supplies 6-3

replacing

air filter 6-10

blower 6-18

chassis interface 6-13

cover panels 6-8

LED board 6-14

RSP2

LEDs 8-21

RSP4 and RSP8

LEDs 8-22

safety recommendations 2-2

site environment guidelines 2-12to 2-31

system software

description 1-56

troubleshooting

cooling subsystem 8-11

guidelines 8-8

power subsystem 8-10

startup problems 8-9to 8-10

using LEDs 8-20

wiring guidelines 2-10

Cisco 7507-MX

arbiter 1-50

overview 1-11to??

Cisco 7507-MX and Cisco 7513-MX

RSP8

description 1-36to 1-39

Cisco 7513

arbiter 1-50

overview 1-15to??

RSP2

DRAM, upgrading 9-2to 9-5

RSP4

description 1-34to 1-35

RSP4 and RSP8

DRAM, upgrading 9-5to 9-11

Cisco 7513, Cisco 7513-MX, and Cisco 7576

blower

replacement 7-10

chassis interface

replacement 7-14

EEPROM exchange, backplane 7-7

installation

procedures 3-19to 3-31

maintenance procedures ??to7-19

power supply

connection 3-29

installation 3-27

removing

backplane maintenance cover 7-13

blower 7-10

card cage 7-5

chassis interface 7-14

cover panels 7-11

power supplies 7-3

replacing

backplane maintenance cover 7-14

blower 7-10

card cage 7-9

chassis interface 7-18

cover panels 7-12

Cisco 7513 and Cisco 7513-MX

additional information, obtaining 4-32

blower

description 1-53

cable connections, RSP 3-32to 3-33

chassis airflow 2-14

chassis interface

description 1-50

common RSP features 1-42

Flash memory, using 4-20to 4-32

installation

preparation 2-1to 2-35

interface processor description 1-54

power supply

descriptions 1-47

guidelines 2-9

installation 3-27

LEDs 8-25

rack-mounting guidelines 2-20

RSP2

LEDs 8-21

RSP4 and RSP8

LEDs 8-22

safety recommendations 2-2

site environment guidelines 2-12to 2-35

system software

description 1-56

troubleshooting

cooling subsystem 8-16

guidelines 8-12

power subsystem 8-15

startup problems 8-13to 8-14

using LEDs 8-20

wiring guidelines 2-10

Cisco 7513-MX

arbiter 1-50

overview 1-20to??

Cisco 7576

additional information, obtaining 4-32

arbiter 1-50

blower

description 1-53

cable connections, RSP 3-32to 3-33

chassis airflow 2-14

chassis interface

description 1-50

common RSP features 1-42

Flash memory, using 4-20to 4-32

installation

preparation 2-1to 2-35

interface processor description 1-54

overview 1-25to??

power supply

descriptions 1-47

guidelines 2-9

LEDs 8-25

rack-mounting guidelines 2-20

RSP2

DRAM, upgrading 9-2to 9-5

LEDs 8-21

RSP4

description 1-34to 1-35

RSP4 and RSP8

DRAM, upgrading 9-5to 9-11

LEDs 8-22

safety recommendations 2-2

site environment guidelines 2-12to 2-35

system software

description 1-56

requirements 1-30

troubleshooting

cooling subsystem 8-16

guidelines 8-12

power subsystem 8-15

startup problems 8-13to 8-14

using LEDs 8-20

wiring guidelines 2-10

Cisco Extended Bus

See CyBus

cleaning the air filter 6-10

clock generation, arbiter (CyBus) 1-50

config-register command 4-7

config terminal command 4-18

configuration

file, saving 4-17, 4-19

interfaces 4-15to 4-18

modifications 4-19

notes 5-1, 6-1, 7-1

register

bit meanings 4-5to 4-7, A-1

boot field 4-5, A-2

boot filename 4-6, A-3

broadcast address settings 4-6, A-4

changing settings 4-7

configuration 4-4to 4-7

displaying the configuration register while running Cisco IOS A-5

displaying the configuration register while running ROM monitor A-5

setting the configuration register while running Cisco IOS A-6

setting the configuration register while running ROM monitor A-6

transmission rate settings 4-7

sample 4-13to 4-15, 4-16to 4-17

configuration procedures, basic 4-1to 4-20

configure terminal command 4-7

configuring

AppleTalk 4-14

global parameters 4-12

procedure 4-13

sample configuration 4-14to 4-15

interface parameters

examples of 4-15, 4-16

sample configuration 4-16to 4-17

IPX 4-14

the Cisco 7500 series routers 4-11to 4-19

using AutoInstall 4-11

using configuration mode 4-18

using setup command facility 4-12

confreg command 4-9

connecting

auxiliary port 3-32

console port 3-32

DC-input power

Cisco 7505 3-9

Cisco 7507 and Cisco 7507-MX 3-16

Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-29

console port

connecting devices to 3-32

description 1-44

pinout 1-44

settings 4-7

terminal 8-6, 8-14

cooling subsystem 8-3, 8-17

copy command, (Flash memory) 4-29

copy running-config startup-config command 4-12, 4-19

copy tftp flash command 4-27

CPU

halt LED on RSP2 8-21

halt LED on RSP4 and RSP8 8-22

system

RSP2 1-32

RSP4 1-35

critical status level, environmental monitor

Cisco 7505 2-24

Cisco 7507 and Cisco 7507-MX 2-25

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-25

CSA agency approvals

Cisco 7505 1-6

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

current rating, AC and DC 1-19, 1-24, 1-30

customer service, accessing 4-32

CxBus description 1-2

CyBus

arbiter clock generation 1-50

arbitration 1-50

Cisco 7505 1-4

Cisco 7507 1-8

Cisco 7507-MX 1-12

Cisco 7513 1-18

Cisco 7513-MX 1-23

clock 1-50

description 1-2, 1-5

global lock 1-50

traffic 1-50

See also backplane

D

damage from overheating 2-22

data transmission-rate settings 4-7

dBus description 1-2

DC fail LED on power supply

See LEDs

DC-input

power connection

Cisco 7505 3-9

Cisco 7507 and Cisco 7507-MX 3-17

Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-29

power supply

installation, Cisco 7505 5-13to 5-14

installation, Cisco 7507 and Cisco 7507-MX 3-14to 3-19

installation, Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-27to 3-31

LEDs 8-23to 8-26

specifications 1-19, 1-24, 1-30

DC OK LED 8-5, 8-13, 8-23

dimensions

chassis

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

interface processors 1-54

displays, environmental 2-26to 2-35

distance limitations, cable transmission 2-11

Documentation CD-ROM, ordering 4-32

DRAM

locations

RSP2 9-1

RSP4 9-6

RSP4 and RSP8 configurations 9-8

upgrade procedures 9-1to 9-11

dual arbiter 1-50

dual CyBus

Cisco 7505 1-4

Cisco 7507 1-8

Cisco 7507-MX 1-12

Cisco 7513 1-17

Cisco 7513-MX 1-22

Cisco 7576 1-27

description 1-2

See also CyBus

E

EEPROM

description 1-44

exchanging 7-7to 7-8

electromagnetic pulse

See EMP

electronically erasable programmable read-only memory

See EEPROM

electrostatic discharge precautions 2-6

EMI

agency approvals 1-19, 1-24, 1-30

Cisco 7505 1-6

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

prevention 2-11

EMP, avoiding the effects of 2-11

enable command 4-7, 4-10, 4-18

enable password command 4-8

environment, site 2-12

environmental

displays 2-26to 2-35

monitor descriptions 2-26to 2-35

status

Cisco 7505 2-27to 2-29

Cisco 7507 and Cisco 7507-MX 2-29to 2-31

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-31to 2-35, 2-35to??

environmental reports 2-26to??

ESD

See electrostatic discharge precautions

EXEC

privileged mode 4-8

F

failure

AC or DC source 2-23, 8-5, 8-13, 8-23

AC source 8-25

blower 8-13

fans 8-5

power supply, DC section 8-23, 8-25

fan

control board 5-2

failure 2-29, 8-5

shutdown 2-29

tray

description 5-2

operating voltages 8-5

replacing 5-5

fan OK LED 8-25

FCC agency approvals

Cisco 7505 1-6

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

field-replaceable unit

See FRU

filenames, for booting over the network 4-5

filter, cleaning, air 6-10

Flash memory

additional commands 4-26

card installation and removal 4-20to 4-23

commands 4-5

copy command 4-29

copying between cards 4-28

copying bootable images between 4-28

copying files 4-27

copying files to RSP memory 4-30to 4-32

description 1-43

formatting a new PC Card 4-24

PC Card replacement 4-21

using 4-20to 4-32

format command 4-24, 4-32

formatting a new PC Card 4-24

frequency specifications, line

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

front cover panel 7-11

FRUs, definition 1-2

G

global parameters, configuring 4-12

gravity, maintaining low center

Cisco 7505 2-17

Cisco 7507 and Cisco 7507-MX 2-19

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-22

H

Hall Effect signal 2-29

humidity specifications

Cisco 7505 1-6

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

system 2-12

I

IGRP

See Interior Gateway Routing Protocol

immunity, agency approvals for interference

Cisco 7505 1-6

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

inlet air 2-28, 2-33

installation

cable-management bracket

Cisco 7505 3-9

Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-26

Cisco 7513, Cisco 7513-MX, and Cisco 7576 blower module 7-10

Cisco 7513, Cisco 7513-MX, and Cisco 7576 card cage assembly 7-5

general 3-7, 3-24

guidelines

Cisco 7505 3-4to 3-6

Cisco 7507 and Cisco 7507-MX 3-11to 3-13

Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-19to 3-23

power supply

Cisco 7505 5-13to 5-14

Cisco 7507 and Cisco 7507-MX 3-14to 3-19, 6-3to 6-6

Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-27to 3-29, 7-3to 7-5

rack-mounting, Cisco 7505 3-7to??

troubleshooting 8-1

installing

backplane cover, Cisco 7505 5-9

backplane maintenance cover, Cisco 7513, Cisco 7513-MX, and Cisco 7576 7-13

blower

Cisco 7507 and Cisco 7507-MX 6-15

Cisco 7513, Cisco 7513-MX, and Cisco 7576 7-10

card cage, Cisco 7513, Cisco 7513-MX, and Cisco 7576 7-9

chassis interface

Cisco 7505 5-11

Cisco 7507 and Cisco 7507-MX 6-12

Cisco 7513, Cisco 7513-MX, and Cisco 7576 7-14

Cisco 7505 3-4to 3-11

Cisco 7507 and Cisco 7507-MX 3-11to 3-19

Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-19to 3-31

cover panels, Cisco 7513, Cisco 7513-MX, and Cisco 7576 7-11

fan tray, Cisco 7505 5-5

LED board 6-14

PC Card 4-21

power harness cover, Cisco 7505 5-7

power supply

Cisco 7505 5-15

Cisco 7507 and Cisco 7507-MX 3-14

Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-27

interface

configuration 4-15to 4-18

parameters 4-15

processors

additional documentation 1-54

description 1-54

dimensions 1-54

LEDs 1-54, 8-19

overview 1-54to 1-55

removing and installing in Cisco 7505 3-6

removing and installing in Cisco 7507 and Cisco 7507-MX 3-13

removing and installing in Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-23

troubleshooting 8-19

types 1-54

types supported 1-1

Interior Gateway Routing Protocol, configuring 4-14

interior routing protocol, setting 4-14

intermittent power failures, checking for

Cisco 7505 2-27

Cisco 7507 and Cisco 7507-MX 2-30

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-33, 2-36

Internet Package Exchange, configuring 4-13, 4-14

interrupting system with Break key 4-6

IP, setting routing protocols for 4-14

IPX

See Internet Package Exchange

L

label, chassis serial number 8-2

LED board, replacing 6-13

LEDs

AC OK 8-25

CPU Halt 8-21

DC Fail 8-23

DC OK 4-2, 8-5, 8-13, 8-23, 8-25

enabled on interface processors 4-2

fan OK 8-25

front panel 8-20

interface processor 1-54, 8-19

normal on front panel 8-20

normal on power supply 8-20

on all RSPs 1-42

output fail 8-25

PC Card slot 1 and slot 2 8-21, 8-22

power A and power B 8-20

power supply

Cisco 7505 8-23

Cisco 7507 and Cisco 7507-MX 8-23

Cisco 7513, Cisco 7513-MX, and Cisco 7576 8-25

RSP 8-6, 8-10, 8-14, 8-18

system

Cisco 7507 and Cisco 7507-MX 8-20

Cisco 7513, Cisco 7513-MX, and Cisco 7576 8-20

troubleshooting with 8-19to 8-26

lightning storm, safety during 2-3

locked blocks, recovering from 4-32

M

memory

DRAM

description 1-42

replacement procedures 9-1to 9-11

Flash

See Flash memory

NVRAM

description 1-43

RSP4 and RSP8 DRAM configurations 9-8

SRAM configurations 1-43

messages

blower shutdown 2-31, 2-35

environmental 2-26to??

fan shutdown 2-29

microcode, downloadable 1-54

N

nonvolatile random-access memory

See NVRAM

normal LED

front panel 8-21

RSP2 8-21

RSP4 and RSP8 8-22

normal status level, environmental monitor

Cisco 7505 2-24

Cisco 7507 and Cisco 7507-MX 2-25, 2-29

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-25, 2-31, 2-35

number of VIPs supported, 7505 1-3

number of VIPs supported, 7507 1-6

number of VIPs supported, 7507-MX 1-11

number of VIPs supported, 7513 1-15

number of VIPs supported, 7513-MX 1-20

number of VIPs supported, 7576 1-25

NVRAM

backup batteries 1-43

description 1-43

log 2-23

RSP2 1-33

RSP4 1-36

saving settings 4-19

using with Flash memory 4-30, 4-31

O

operating conditions for chassis 2-12

operating temperature 1-10, 1-14

out-of-tolerance condition 2-23, 8-23, 8-25

overtemperature conditions 8-1

P

passwords

enabling 4-8

recovering 4-9to 4-10

PC Card

formatting a new card 4-24

slots

RSP2 1-33

RSP4 1-36

RSP8 1-39

types 1-36, 1-39

PFC

all AC-input power supplies 2-7

Cisco 7505 power supply 2-7

Cisco 7507 and Cisco 7507-MX power supply 2-8

Cisco 7513, Cisco 7513-MX, and Cisco 7576 power supply 2-9

port

auxiliary

description 1-44

pinout 1-45

console

description 1-44

pinout 1-44

power

backplane harness 5-2

cable

Cisco 7507 and Cisco 7507-MX 2-8

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-9

requirements 5-2

safety recommendations 2-2

Cisco 7505 2-7

Cisco 7507 and Cisco 7507-MX 2-8

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-9

cord 8-11, 8-15

DC-output status

Cisco 7505 2-24

Cisco 7507 and Cisco 7507-MX 2-25

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-25

disabled 2-23

distribution 5-2

emergency switch 2-3

factor corrector

See PFC

failures 2-24, 2-30, 2-33, 2-36

harness cover 5-2

internal DC voltage 8-5, 8-13

LED 8-5, 8-13

loss 8-23, 8-25

normal startup sequence 8-10

service 3-2

site guidelines 2-7

specifications 1-5, 1-10, 1-14, 1-19, 1-24, 1-30

status 8-5, 8-13

subsystem for troubleshooting 8-3

surge suppression 2-11

troubleshooting

Cisco 7505 8-7

Cisco 7507 and Cisco 7507-MX 8-10

Cisco 7513 and Cisco 7513-MX 8-15

Cisco 7576 8-15

ungrounded 2-3

power factor corrector 1-10, 1-14

power supply

active 8-23

bays

Cisco 7507 1-6

Cisco 7507-MX 1-11

Cisco 7513 1-15

Cisco 7513-MX 1-20

Cisco 7576 1-25

cables

Cisco 7505 1-6

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

DC-input

Cisco 7505 connections 3-9

Cisco 7507 and Cisco 7507-MX connections 3-17

Cisco 7513, Cisco 7513-MX, and Cisco 7576 connections 3-29

environmental monitor

Cisco 7505 2-24

Cisco 7507 and Cisco 7507-MX 2-25

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-25

handles 5-14

installation

Cisco 7505 5-13to 5-14

Cisco 7507 and Cisco 7507-MX 3-14to 3-19

Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-27to 3-31

LEDs

Cisco 7505 8-23

Cisco 7507 and Cisco 7507-MX 8-23

Cisco 7513, Cisco 7513-MX, and Cisco 7576 8-25

removal

Cisco 7505 5-13to 5-15

Cisco 7507 and Cisco 7507-MX 6-3to 6-6

Cisco 7513, Cisco 7513-MX, and Cisco 7576 7-3to 7-5

safety interlock on Cisco 7507, Cisco 7507-MX, Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-7

shutdown 2-23, 8-23, 8-25, 8-26

specifications

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

status 8-5, 8-13

troubleshooting 8-5, 8-9, 8-13

privileged mode 4-8

problem solving, system 8-3

procedures

Autoinstall configuration 4-11

cable-management brackets, installing

Cisco 7505 3-9

Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-26

enabling passwords 4-8

Ethernet interface configuration 4-15to 4-16

Flash memory

card installation and removal 4-20to 4-23

copying files to 4-25

copying files to RSP memory 4-30to 4-32

enabling booting from 4-26

formatting cards 4-24

making images bootable 4-25

using 4-20to 4-32

global parameters, configuring 4-12to 4-15

installation 3-24

Cisco 7505 3-4to 3-11

Cisco 7507 and Cisco 7507-MX 3-11to 3-19

Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-24to 3-31

installing

Cisco 7505 cable-management bracket 3-9

Cisco 7505 power supplies 5-13to 5-14

Cisco 7507 and Cisco 7507-MX power supplies 3-14to 3-19

Cisco 7513, Cisco 7513-MX, and Cisco 7576 cable-management bracket 3-26

Cisco 7513, Cisco 7513-MX, and Cisco 7576 power supplies 3-27to 3-31

interfaces, configuring 4-15to 4-18

maintenance

Cisco 7505 5-1to 5-15

Cisco 7507 and Cisco 7507-MX 6-1to 6-19

Cisco 7513, Cisco 7513-MX, and Cisco 7576 7-1to 7-19

rack-mounting, Cisco 7505 3-7to??

recovering from a lost password 4-9to 4-10

removing

backplane cover, Cisco 7505 5-9

backplane cover, Cisco 7513, Cisco 7513-MX, and Cisco 7576 7-13

Cisco 7505 cover panel 5-3

Cisco 7505 fan tray 5-5

Cisco 7505 power supply 5-13to 5-14

Cisco 7507 and Cisco 7507-MX power supplies 6-3to 6-6

Cisco 7513, Cisco 7513-MX, and Cisco 7576 card cage 7-5to 7-7

Cisco 7513, Cisco 7513-MX, and Cisco 7576 power supplies 7-3to 7-5

cover panels 7-11

power harness cover 5-7

power supply 7-3

replacing

Cisco 7505 cover panel 5-3

Cisco 7505 fan tray 5-5

Cisco 7505 power supply 5-15

Cisco 7507 and Cisco 7507-MX blower 6-15

Cisco 7513, Cisco 7513-MX, and Cisco 7576 blower 7-10

Cisco 7513, Cisco 7513-MX, and Cisco 7576 card cage assembly 7-5to 7-9

cover panels 7-11

power harness cover 5-7

replacing processor modules

Cisco 7505 3-6

Cisco 7507 and Cisco 7507-MX 3-13

Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-23

router configuration, basic 4-1to 4-19

synchronous serial interface configuration 4-16to 4-18

system configuration, basic 4-11to 4-19

system startup 4-2to 4-3

upgrading DRAM 9-1to 9-11

using Autoinstall 4-11

using configuration mode 4-18

using setup command facility 4-12

processor

modules

black cardboard board rack, Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-20

removal and replacement in Cisco 7505 3-6

removal and replacement in Cisco 7507 and Cisco 7507-MX 3-13

removal and replacement in Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-23

shutdown 2-23

system

RSP2 1-32

RSP4 1-35

protocols 1-1

R

rack

recommendations, Cisco 7505 2-16

recommendations, Cisco 7507 and Cisco 7507-MX 2-18

recommendations, Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-20

ventilation 2-15

rack-mounting procedure, Cisco 7505 3-7to??

radio frequency interference

See RFI

recovering a lost password 4-9

refresh, environmental display 2-28

reload command 4-7

replaceable system components 5-1, 6-1, 7-1

reports, environmental 2-26

reset switch 8-22

RFI, preventing effects of 2-11

RIP

See Routing Information Protocol

Routing Information Protocol, configuring 4-14

RSP

console and auxiliary port connections 3-32

Flash memory card replacement 4-20

LEDs 8-6, 8-10, 8-14, 8-18

normal startup 8-6, 8-10, 8-14

operating voltages 8-5, 8-13

troubleshooting 8-18

RSP2

description 1-31to 1-33

DRAM

location 9-1

upgrade procedure 9-1to 9-5

system CPU 1-32

Y-cables 1-45

RSP4

3.3V DIMM device caution 9-6, 9-7

description 1-33to 1-36

DRAM

location 9-6

system CPU 1-35

Y-cables 1-45

RSP4 and RSP8

3.3V DIMM device caution 9-8

DRAM

DIMM configurations 9-8

upgrade procedure 9-5to 9-11

RSP8

description 1-36to 1-38

DRAM DIMM location 9-7

Y-cables 1-45

S

safety

agency approvals

Cisco 7505 1-6

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

cable recommendations 2-2

ESD 2-6

general guidelines 2-2

lifting the chassis 2-3, 2-5

recommendations 2-2, 2-3

Safety Warnings xv

sample configuration 4-13to 4-15, 4-16to 4-17

saving the configuration file 4-17, 4-19

secret passwords, enabling 4-8

sensors, temperature 2-28, 2-30, 2-33, 2-36

setup command facility

example 4-14

script

banner information (example) 4-12

interface summary (example) 4-13

System Configuration Dialog (example) 4-13

using 4-12

show environment command 2-26, 2-28

show environment table command 2-27, 2-29, 2-32, 2-35

show version command 4-7

shutdown

blower failure 2-31, 2-35

environmental 2-22, 8-8, 8-16, 8-17

fan failure 2-29

power supply 2-23, 8-23, 8-25

processor 2-23

thresholds 2-22

SIMM 9-1

Simple Network Management Protocol, configuring 4-14

site

cabling guidelines 2-10

environmental guidelines 2-12to 2-15

power 2-7

SNMP

See Simple Network Management Protocol

software

configuration register functions 4-4to 4-7

minimum system requirements

Cisco 7505 1-6

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

spare parts

Cisco 7505

chassis interface 5-11

fan tray 5-5

power supply 5-13

Cisco 7507 and Cisco 7507-MX

air filter 6-10

blower assembly 6-15

LED board 6-13

power supplies 6-3

Cisco 7513, Cisco 7513-MX, and Cisco 7576

blower module 7-10

card cage assembly 7-5

chassis interface 7-14

power supplies 7-3

spares definition 1-3

specifications

altitude 2-13

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

humidity 2-12

power supply

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

RSP2 1-33

RSP4 1-35

temperature

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

system 2-12

vibration 2-13

voltage

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

weight

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

startup, system 4-2, 4-2to 4-3

statistics, environmental 2-28, 2-32

subsystems for troubleshooting

cooling 8-17

switch, emergency power 2-3

synchronous serial interfaces, configuring 4-16

system

backplane 1-4

banner 4-2, 8-6, 8-14

booting for the first time 4-8

configuration, basic 4-11to 4-19

configuration register

configuration 4-4to 4-7

settings 4-3

CPU

RSP2 1-32

RSP4 1-35

internal components 6-11

LEDs

Cisco 7507 and Cisco 7507-MX 8-20

Cisco 7513, Cisco 7513-MX, and Cisco 7576 8-20

power 8-5, 8-13

problems at startup 8-2

problem solving 8-3

processor

RSP2 1-32

RSP4 1-35

RSP8 1-37

replaceable components 5-1, 6-1, 7-1

shutdown 8-5, 8-13

specifications

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

startup 4-2to 4-3, 8-4, 8-13

troubleshooting 8-1to 8-26

T

telco-type equipment racks 2-16, 2-18

telephone jacks 2-3

temperature

internal chassis 2-22

operating 1-19, 1-24, 1-30

parameters for environmental monitor 2-28, 2-33

sensors 2-28, 2-30, 2-33, 2-36

specifications

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

system 2-12

temperature and voltage thresholds

Cisco 7505 2-24

Cisco 7507 and Cisco 7507-MX 2-25

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-25

descriptions 2-24to 2-25

terminal block cover, removing and replacing

Cisco 7505 3-10

Cisco 7507 and Cisco 7507-MX 3-17

Cisco 7513, Cisco 7513-MX, and Cisco 7576 3-30

thresholds

environmental 2-25, 2-26

shutdown 2-22

time-division multiplexing (TDM) 1-3, 1-13, 1-23, 1-28

traffic on CyBus 1-50

transmission rate settings A-4

troubleshooting

cooling subsystem 8-17

installation 8-1

power

Cisco 7505 8-7

Cisco 7507 and Cisco 7507-MX 8-10

Cisco 7513 and Cisco 7513-MX 8-15

Cisco 7576 8-15

strategy

Cisco 7505 8-4

Cisco 7507 and Cisco 7507-MX 8-9

Cisco 7513, Cisco 7513-MX, and Cisco 7576 8-12

using LEDs 8-19to 8-26

using subsystems

Cisco 7505 8-4to 8-8

Cisco 7507 and Cisco 7507-MX 8-8to 8-12

Cisco 7513, Cisco 7513-MX, and Cisco 7576 8-12to 8-17

processors 8-18to 8-19

turbo arbiter 1-13, 1-23, 1-50

U

UL agency approvals

Cisco 7505 1-6

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

upgrades

DRAM

RSP2 9-1to 9-5

RSP4 and RSP8 9-5to 9-11

V

vacuuming, air filter 6-10

ventilation, rack 2-15

vibration specifications, system 2-13

voltage

out-of-tolerance condition, description of 2-23

specifications

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

voltage and temperature thresholds

Cisco 7505 2-24

Cisco 7507 and Cisco 7507-MX 2-25

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-25

descriptions 2-24to 2-25

W

warnings

warning definition xv

warnings in environmental reports

Cisco 7505 2-28

Cisco 7507 2-29

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-33

weight

Cisco 7505 1-5

Cisco 7507 1-10

Cisco 7507-MX 1-14

Cisco 7513 1-19

Cisco 7513-MX 1-24

Cisco 7576 1-30

wiring

backplane 5-2, 6-2, 7-2

codes

Cisco 7505 2-8

Cisco 7507 and Cisco 7507-MX 2-8

Cisco7507 and Cisco 7507-MX 2-8, 3-13

Cisco 7513, Cisco 7513-MX, and Cisco 7576 2-9

Cisco7513, Cisco 7513-MX, and Cisco 7576 3-23

guidelines 2-10to 2-11

interference 2-10

plant 2-10

telephone 2-3

See also cables

Y

Y-cables, RSP2, RSP4, and RSP8 1-45

Posted: Thu Mar 24 12:42:07 PST 2005
All contents are Copyright © 1992--2005 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.