cc/td/doc/product/wanbu/access/aprod
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

About This Guide

About This Guide

This section discusses the objectives, audience, organization, and conventions of the FastPADmp, mp6, mp12, and FastPADmpr 12/24 Installation Guide.

Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more up to date than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

Objectives

This publication will step you through the initial site preparation and installation of the FastPADmp. Troubleshooting, maintenance procedures, and cable specifications are also provided.

Although minimum software configuration information is provided, it is not meant as comprehensive FastPADmp configuration instructions. For detailed software configuration information, refer to the configuration guide and command reference publications. These publications are available on the Documentation CD that came with your FastPADmp, or you can order printed copies.

Audience

This publication is designed for the person installing the FastPADmp, who should be familiar with electronic circuitry and wiring practices and have experience as an electronic or electromechanical technician.

Organization

The major sections of this hardware installation guide are as follows:

Conventions

This publication uses the following conventions to convey instructions and information.

Command descriptions use these conventions:

Examples use these conventions:


Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.
TimeSaver Means the described action saves time. You can save time by performing the action described in the paragraph.
Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.
Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, you must be aware of the hazards involved with electrical circuitry and familiar with standard practices for preventing accidents. (To see translated versions of this warning, refer to the Regulatory Compliance and Safety Information document that accompanied your FastPADmp.)


hometocprevnextglossaryfeedbacksearchhelp
Posted: Thu Jan 25 14:20:39 PST 2001
All contents are Copyright © 1992--2001 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.