Table of Contents

INDEX

Numerics

100BaseT4, RD-45 connectors, cable pinouts for     C-9

100BaseTX, RD-45 connectors, cable pinouts for     C-9

A

A1Host, protocol domain in RMON2 group, overview     1-11

A1Matrix, protocol domain in RMON2 group, overview     1-11

access

levels, setting     10-20

list

address groups, defining     10-21

examples     10-24

security feature, using     10-20  to 10-24

security, configuring     10-21  to 10-23

security, disabling     10-23

accessing

additional Cisco documentation

on the CD-ROM     xvii

on the world-wide web     xvii

CCO

FAQ on     xxi

via modem     xxi

via Telnet     xxi

via the world-wide web     xx

accessories

BNC-to-BNC cables, with DS-3 ATM model     3-4

category 5 UTP straight-through cables, with

Fast Ethernet 100BaseTX Full-Duplex model     3-2

Multiport Fast Ethernet 100BaseTX Full-Duplex model     3-2

DB-5 connector cable, male/female, with DS-3 ATM model     3-4

DS-3 ATM tap, with DS-3 ATM model     3-4

Fast Ethernet TX tap, with

Fast Ethernet 100BaseTX Full-Duplex model     3-2

Multiport Fast Ethernet 100BaseTX Full-Duplex model     3-2

fiber-optic splitter tap, with

Fast Ethernet 100BaseFX Full-Duplex model     3-2

Gigabit Ethernet model     3-2

Multiport Fast Ethernet 100BaseFX Full-Duplex model     3-2

fiber-optic splitter, with OC-3 ATM model     3-4

hardware installation kit, with

DS-3 ATM model     3-4

Gigabit Ethernet model     3-2

HSSI

cable, with HSSI model     3-4

tap, with HSSI model     3-4

SC-duplex-to-dual-SC-duplex fiber-optic cable, with

Gigabit Ethernet model     3-2

OC-3 ATM model     3-4

SC-to-MIC fiber-optic cable, with

Fast Ethernet 100BaseFX Full-Duplex model     3-2

Fast Ethernet 100BaseFX Half-Duplex model     3-2

Multiport Fast Ethernet 100BaseFX Full-Duplex model     3-2

SC-to-SC DX single-mode fiber-optic cable, with Gigabit Ethernet model     3-2

SC-to-SC fiber-optic cable, with

Fast Ethernet 100BaseFX Full-Duplex model     3-2

Fast Ethernet 100BaseFX Half-Duplex model     3-2

FDDI DAS model     3-3

FDDI SAS model     3-3

Multiport Fast Ethernet 100BaseFX Full-Duplex device     3-2

SC-to-SC multi-mode fiber-optic cable, with

Gigabit Ethernet model     3-2

OC-3 ATM model     3-4

SC-to-ST fiber-optic cable, with

Fast Ethernet 100BaseFX Full-Duplex model     3-2

Fast Ethernet 100BaseFX Half-Duplex model     3-2

Multiport Fast Ethernet 100BaseFX Full-Duplex device     3-2

ST-to-MIC couplers, with

Fast Ethernet 100BaseFX Full-Duplex model     3-2

Multiport Fast Ethernet 100BaseFX Full-Duplex model     3-2

ST-to-ST couplers, with

Fast Ethernet 100BaseFX Full-Duplex model     3-2

Multiport Fast Ethernet 100BaseFX Full-Duplex model     3-2

T1/E1 WAN tap kit, with

Channelized T1/E1 WAN model     3-3

Multiport T1/D or E1/D WAN model     3-3

table of     3-2  to 3-4

tap cable, with

HSSI model     3-4

three-stall top rack panel, with

DS-3 ATM model     3-4

Gigabit Ethernet model     3-2

WAN tap kit, with

Multiport T1/E1 WAN model     3-3

WAN model     3-3

address

groups, defining     10-21

list

examples     10-24

security, configuring     10-21  to 10-23

security, disabling     10-23

AddressMap, protocol domain in RMON2 group, overview     1-10

ADMIN login type, overview     1-13

advanced features, using     10-1  to 10-38

CDP (Cisco Discovery Protocol)     10-34

FASTMIB feature     10-35

IP filters for expert data reduction, creating     10-30  to 10-33

dvftp, using to download filter information     10-31  to 10-32

IP-DATAFILTER, using to configure filters     10-32  to 10-33

modem support     10-9  to 10-17

modem configuration commands     10-10  to 10-11

modem configuration tutorial     10-14  to 10-17

modem control strings, defining     10-12  to 10-13

modem control strings, using     10-11  to 10-12

modem log, using     10-13

private routes, configuring     10-26  to 10-28

roving agent, assigning     10-37  to 10-38

security options, setting     10-18  to 10-24

access list security feature     10-20  to 10-24

console logout feature     10-19

data capture, using for packet decoding and analysis     10-19

serial line internet protocol support     10-3  to 10-9

SLIP address, selecting     10-3

SLIP configuration overview     10-3  to 10-4

SLIP configuration tutorial     10-4  to 10-9

SLIP routing

configuration tutorial     10-4  to 10-9

configuring     10-29  to 10-30

using     10-28  to 10-30

SNMP trap ports and destinations, configuring     10-33  to 10-34

static routes, configuring     10-25  to 10-26

table of advanced features     10-1  to 10-2

Token Ring interfaces, assigning     10-36

agent

firmware, where loaded     3-13

options, configuring     7-56  to 7-57

routing, overview     1-13

Agent Configuration utility, using     5-2  to 5-4

Alarms, functionality in RMON1 group, overview     1-10

amber LEDs

Ethernet interface     6-3

FDDI DAS interface     6-28

FDDI SAS interface     6-31

front-access chassis devices     3-23

Gigabit Ethernet interface     6-18

OC-3 ATM interface     6-57

small chassis devices     3-8

Application Reponse Time (see ART)

ART (Application Response Time)

ART MIB Monitor, enhanced RMON, overview     1-11

ART MIB option, using     11-14  to 11-19

supported, overview     1-8

AS/NZA 3260 Clause 1.2.14.3, warning regarding     2-2

ASCII terminal, using for manual configuration     5-9  to 5-12

connecting device to terminal     5-10

power-up sequence     5-11  to 5-12

warnings regarding     5-9  to 5-10

assigning or changing IP address, net mask, and gateway address     5-13  to 5-15

Asynchronous Transfer Mode (see ATM)

ATM PVC

analysis, Cisco enhanced RMON extension, overview     1-12

specifying     9-10  to 9-12

ATM RMON

supported in SwitchProbe devices     1-7

ATM shadow MIB, guidelines for use     A-5  to A-6

ATM VPIs/VCIs, monitoring     9-1  to 9-12

attaching mounting brackets to device     4-4  to 4-5

audience for this document     xviii

automatic configuration using a BOOTP server     5-6  to 5-8

invalidating an IP address     5-8

automatic discovery of frame relay DLCIs     9-2  to 9-3

B

bits, number of

front-access chassis devices     3-25

small chassis devices     3-11

BNC-to-BNC cables, accessory with DS-3 ATM model     3-4

BOOTP server, using for automatic configuration     5-6  to 5-8

invalidating an IP address     5-8

C

cable pinouts, pin designations for     C-1  to C-10

100BaseT4, RJ-45 connector     C-9

100BaseTX, RJ-45 connector     C-9

console and remote serial ports, RS-232 connector     C-10

Ethernet AUI     C-1  to C-2

Fast Ethernet FDX Tap, mini-DIN connector     C-9

FDDI RJ-12     C-8

null-modem crossover cable     C-10

Token Ring RJ-45     C-7  to C-8

WAN     C-2  to C-7

category 5 UTP straight-through cables, accessories with

Fast Ethernet 100BaseTX Half-Duplex model     3-2

Multiport Fast Ethernet 100BaseTXFull-Duplex model     3-2

cautions

regarding

connecting devices to the network     6-2

Fast Ethernet Half-Duplex inteface speed, changing     5-19

keyboard port     3-10

Power Out socket, not using     3-10

power, interval to wait before turning on     4-10

WAN devices, connecting to network     6-34

significance of     xx

CCO (Cisco Connection Online)     xx  to xxi

accessing

via modem     xxi

via Telnet     xxi

via world-wide web     xx

FAQ on, accessing     xxi

services     xx

CDP (Cisco Discovery Protocol)

supported, overview     1-8

using     10-34

Channelized T1/E1 WAN

model

logical description     3-6

part of front-access chassis devices, overview     1-5

T1/E1 WAN tap kit accessory     3-3

special interface options, configuring     7-14  to 7-32

circuit breakers, warning regarding rating     2-1

Cisco Connection Online (see CCO)

Cisco Discovery Protocol (see CDP)

class 1 laser products, identification and warnings regarding     6-2

command line

objects (table)     8-5  to 8-16

operations     8-3  to 8-16

do (command)     8-4

get (command)     8-4

help (command)     8-5

quit (command)     8-5

set (command)     8-4

overview screen, using     8-3

using to customize devices     8-1  to 8-2

configuring

frame relay DLCIs manually     9-4  to 9-5

special interface options, configuring     7-11  to 7-55

Channelized T1/E1 WAN     7-14  to 7-32

DS-3 ATMI     7-51  to 7-55

Fast Ethernet     7-44  to 7-46

FDDI     7-47

Gigabit Ethernet     7-46  to 7-47

Multiport T1/D or E1/D WAN     7-32  to 7-44

OC-3 ATMI     7-48  to 7-50

WAN     7-12  to 7-14

SwitchProbe devices     7-1  to 7-64

agent options, configuring     7-56  to 7-57

default domain, configuring     7-58

firmware, upgrading     7-62  to 7-64

interface mode, changing     7-7  to 7-11

interface, selecting     7-6

probe mode, selecting     7-5

read community name, changing     7-1  to 7-2

RMON1 and RMON2 default parameters     7-61  to 7-62

RMON1 and RMON2 parameters     7-59  to 7-61

server address, changing     7-3  to 7-4

SwitchProbe agent, resetting     7-4  to 7-5

write community name, changing     7-3

connecting device interfaces to the network     6-1  to 6-64

DS-3 ATM     6-59  to 6-64

Ethernet     6-3  to 6-6

Fast Ethernet     6-6  to 6-17

Fast Ethernet Full-Duplex 100BaseTX     6-10  to 6-17

warning regarding     6-8

FDDI DAS     6-27  to 6-29

caution regarding     6-28

FDDI SAS     6-30  to 6-32

Gigabit Ethernet     6-18  to 6-25

HSSI     6-48  to 6-50

Multiport 10BaseT Ethernet     6-6

OC-3 ATM     6-51  to 6-58

Token Ring     6-26

WAN     6-33  to 6-48

warnings and cautions regarding     6-33  to 6-34

warnings and cautions regarding, overall     6-2

console

logout security feature, using     10-19

menus, Agent Configuration utility, using     5-3  to 5-4

ports, in PCC interface (interface 2)

front-access chassis devices     3-24  to 3-25

small chassis devices     3-11  to 3-12

ports, RS-232, cable pinouts for     C-10

conventions, typographical, in this document     xix  to xx

couplers, accessories with

Fast Ethernet 100BaseFX Full-Duplex model

ST-to-MIC     3-2

ST-to-ST     3-2

Multiport Fast Ethernet 100BaseFX Full-Duplex model

ST-to-MIC     3-2

ST-to-ST     3-2

custom domain creation, Cisco enhanced RMON functionality, overview     1-12

customizing SwitchProbe devices     8-1  to 8-16

command-line operations     8-3  to 8-16

command-line objects     8-5  to 8-16

do (command)     8-4

get (command)     8-4

help (command)     8-5

quit (command)     8-5

set (command)     8-4

command-line overview screen, using     8-3

command-line, using     8-1  to 8-2

D

data capture, using for packet decoding and analysis     10-19

DB-5 male/female connectors, cable with, DS-3 ATM model accessory     3-4

default

domain, configuring     7-58

groups, definition     1-12

DIP switches, in PCC interface

agent firmware, where loaded     3-13

front-access chassis devices     3-25  to 3-28

settings (table)     3-12

small chassis devices     3-12  to 3-14

disposal of this product, warning regarding     4-1

do (command), using     8-4

documentation

additional Cisco

on the CD-ROM     xvii

on the world-wide web     xvii

conventions, typographical, used in     xix  to xx

feedback form, submitting electronically     xvii

installation instructions, warning regarding reading before installation     2-1

this document

audience for     xviii

objectives of     xvii

organization of     xviii  to xix

typographical conventions used in     xix  to xx

DS-3 ATM

interface, in connecting devices to the network     6-59  to 6-64

model

logical description     3-6

part of front-access chassis device group, overview     1-5

model accessories

BNC-to-BNC cables     3-4

cable with DB-5 male/female connectors     3-4

DS-3 ATM tap     3-4

hardware installation kit     3-4

three-slot top rack panel     3-4

special interface options, configuring     7-51  to 7-55

tap, DS-3 ATM model accessory     3-4

dust caps on fiber-optic port connections, handling     3-4

dvftp, using to download IP filter information     10-31  to 10-32

E

EIA/TIA-232, formerly RS-232     2-2

EIA/TIA-449, formerly RS-449     2-2

enabling software options     11-21

encapsulation protocol, changing (WAN only)     5-20  to 5-22

enhanced RMON extensions included with software options, overview     1-11  to 1-12

ART MIB Monitor     1-11

ATM PVC analysis     1-12

custom domain creation     1-12

Fast EtherChannel     1-11

Frame Relay DLCI analysis     1-12

NetFlow Monitor     1-11

Resource Monitor     1-11

roving     1-12

Shadow RMON1 MIB     1-12

VLAN Monitor     1-11

WAN Decompression     1-11

EPROM, and agent firmware     3-13

Ethernet

AUI, cable pinouts for     C-1  to C-2

connection type, changing     6-4  to 6-6

warnings regarding     6-4  to 6-5

interface, in connecting devices to the network     6-3  to 6-6

model

description     3-14  to 3-18

Dual Interface Ethernet SwitchProbe device, description     3-16  to 3-18

part of small chassis device group, overview     1-3

Single Interface Ethernet SwitchProbe device     3-15  to 3-16

Events, functionality in RMON1 group, overview     1-10

F

FAQ on CCO, accessing     xxi

Fast Ethernet

FDX tap, mini-DIN, cable pinouts for     C-9

Half-Duplex inteface speed, changing     5-19

caution regarding     5-19

interface, in connecting devices to the network     6-6  to 6-17

Full-Duplex 100BaseFX, connecting to     6-10  to 6-17

Full-Duplex 100BaseTX, connecting to     6-7  to 6-9

warning regarding     6-8

Half-Duplex 100Base, connecting to     6-7

part of front-access chassis devices, overview     1-4

special interface options, configuring     7-44  to 7-46

TX tap, accessory with

Fast Ethernet 100BaseTX Full-Duplex model     3-2

Multiport Fast Ethernet 100BaseTX Full-Duplex model     3-2

FastEtherChannel (see FEC)

FASTMIB feature, using     10-35

FDDI (Fiber Distributed Data Interface)

FDDI DAS

interface, in connecting devices to the network     6-27  to 6-29

FDDI DAS model

accessories, SC-to-SC fiber-optic cables     3-3

logical description     3-6

FDDI SAS

interface, in connecting devices to the network     6-30  to 6-32

model, accessories with, SC-to-SC fiber-optic cables     3-3

model, logical description     3-6

FDDI shadow MIB, guidelines for use     A-1  to A-3

part of front-access chassis devices, overview     1-4

RJ-12 connectors, cable pinouts for     C-8

special interface options, configuring     7-47

FEC (Fast EtherChannel)

enhanced RMON, overview     1-11

Fast EtherChannel option, using     11-20

supported, overview     1-8

feedback (reader comment) form, submitting electronically     xvii

Fiber Distributed Data Interface (see FDDI)

fiber-optic

port connections, dust caps on     3-4

splitter tap, accessory with

Fast Ethernet 100BaseFX Full-Duplex model     3-2

Gigabit Ethernet model     3-2

Multiport Fast Ethernet 100BaseFX Full-Duplex model     3-2

OC-3 ATM model     3-4

splitter tap, mounting in a rack panel (optional)     4-6  to 4-8

fiber-optic cables, accessories with

Fast Ethernet 100BaseFX Full-Duplex model

SC-to-MIC     3-2

SC-to-SC     3-2

SC-to-ST     3-2

Fast Ethernet 100BaseFX Half-Duplex model

SC-to-MIC     3-2

SC-to-SC     3-2

SC-to-ST     3-2

FDDI DAS model, SC-to-SC     3-3

FDDI SAS model, SC-to-SC     3-3

Gigabit model

SC-duplex-to-dual-SC-duplex     3-2

SC-to-SC DX single-mode     3-2

SC-to-SC multi-mode     3-2

Multiport Fast Ethernet 100BaseFX Full-Duplex model

SC-to-MIC     3-2

SC-to-SC     3-2

SC-to-ST     3-2

OC-3 ATM model

SC-duplex-to-dual-SC-duplex multi-mode     3-4

SC-to-SC multi-mode     3-4

Filters, functionality in RMON1 group, overview     1-10

fire hazard, warning regarding telecommunications line cord and     2-2

firmware, upgrading     7-62  to 7-64

flash memory, and agent firmware     3-13

frame relay DLCIs

automatic discovery of     9-2  to 9-3

Frame Relay DLCI analysis, Cisco enhanced RMON extension, overview     1-12

manually

configuring     9-4  to 9-5

specifying     9-3  to 9-5

traps     9-6

front panel, descriptions

front-access chassis series     3-22  to 3-28

illustration     3-22

interfaces     3-24  to 3-28

LEDs     3-23

manual reset feature     3-23

small chassis series     3-7  to 3-9

illustration     3-7

interfaces     3-10  to 3-14

LEDs     3-8

manual reset feature     3-9

power sockets     3-10

power switch     3-9

front-access chassis devices

bits, number of     3-25

line

code     3-25

interface     3-25

rate     3-25

overview     1-3  to 1-6

parity     3-25

SLIP port in     3-24

specifications     3-25

stop bits, number of     3-25

using     3-21  to 3-77

front panel, description     3-22  to 3-28

rear panel, description     3-28  to 3-30

fuses, warning regarding rating to use     2-1

G

gateway address, assigning or changing     5-13  to 5-15

get (command), using     8-4

Gigabit Ethernet

interface, in connecting devices to the network     6-18  to 6-25

logical description     3-6

part of front-access chassis devices, overview     1-4

special interface options, configuring     7-46  to 7-47

green LEDs

Ethernet interface     6-3

FDDI DAS interface     6-27

FDDI SAS interface     6-31

front-access chassis devices     3-23

Gigabit Ethernet interface     6-18

OC-3 ATM interface     6-57

OS-3 ATM interface     6-63

small chassis devices     3-8

grounding equipment, warning regarding     4-9

H

hardware installation kit, accessory with

DS-3 ATM model     3-4

Gigabit Ethernet model     3-2

HCRMON (High-Capacity RMON), supported, overview     1-7

help (command), using     8-5

High-Capacity RMON (see HCRMON)

High-Speed Serial Interface (see HSSI)

History, mini-RMON in RMON1 group, overview     1-9

Host TopN, functionality in RMON1 group, overview     1-9

Hosts, functionality in RMON1 group, overview     1-9

housing, warning regarding opening     2-2

HSSI (High-Speed Serial Interface)

cable, accessory with HSSI model     3-4

interface, in connecting devices to the network     6-48  to 6-50

model, accessories with

HSSI cable     3-4

HSSI tap     3-4

tap cable     3-4

model, logical description     3-6

part of front-access chassis devices, overview     1-5

tap, accessory with HSSI model     3-4

I

initializing a SwitchProbe device     5-1  to 5-22

Agent Configuration utility, using     5-2  to 5-4

console menus     5-3  to 5-4

ASCII terminal, using for automatic configuration     5-9  to 5-12

connecting device to terminal     5-10

power-up sequence     5-11  to 5-12

warnings regarding     5-9  to 5-10

automatic configuration using a BOOTP server     5-6  to 5-8

invalidating an IP address     5-8

BOOTP server, using for automatic configuration     5-6  to 5-8

invalidating in IP address     5-8

configuration tasks, determining     5-5  to 5-6

configuring the management interface     5-6

configuring the monitor interface     5-6

gateway address, assigning or changing     5-13  to 5-15

IP address, assigning or changing     5-13  to 5-15

net mask, assigning or changing     5-13  to 5-15

installing a SwitchProbe device     4-1  to 4-10

(see also configuring SwitchProbe devices)

(see also connecting devices to the network)

(see also initializing a SwitchProbe device)

connecting device to power source     4-9  to 4-10

mounting fiber-optic splitter tap in a rack (optional)     4-6  to 4-8

attaching panel     4-7  to 4-8

installing panel     4-8

mounting front-access device in a rack     4-4  to 4-6

attaching mounting brackets     4-4  to 4-5

mounting in standard rack     4-5  to 4-6

warnings regarding     4-4

tasks, quick reference (table)     4-3

warnings and cautions regarding     4-1  to 4-2

interface

changing

assigning interface numbers     7-9

mode     7-7  to 7-11

non-critical hosts, managing     7-9  to 7-11

front-access chassis devices     3-24  to 3-28

PCC (Interface 2)     3-24  to 3-28

modes, in small chassis devices     3-13  to 3-14

numbers, in small chassis devices     3-14

selecting     7-6

small chassis devices     3-10  to 3-14

interface modes     3-13  to 3-14

interface numbers     3-14

Network Interface Cards (NICs) (interfaces 1 and 3)     3-13

PCC (Interface 2)     3-10  to 3-13

special options, configuring     7-11  to 7-55

Channelized E1/T1 WAN     7-14  to 7-32

DS-3 ATM     7-51  to 7-55

Fast Ethernet     7-44  to 7-46

FDDI     7-47

Gigabit Ethernet     7-46  to 7-47

Multiport T1/D or E1/D WAN     7-32  to 7-44

OC-3 ATM     7-48  to 7-50

WAN     7-12  to 7-14

interface speeds

Fast Ethernet Half-Duplex, changing     5-19

caution regarding     5-19

Token Ring and Wan, changing     5-15  to 5-18

IP addresses

assigning or changing     5-13  to 5-15

invalidating while reconfiguring an agent     5-8

IP filters for expert data reduction, creating     10-30  to 10-33

dvftp, using to down load filter information     10-31  to 10-32

IP-DATAFILTER, using to configure filters     10-32  to 10-33

IP-DATAFILTER for IP filter configuration, setting from the command line     10-32  to 10-33

L

LEDs

amber

Ethernet interface     6-3

front-access chassis devices     3-23

Gigabit Ethernet interface     6-18

OC-3 ATM interface     6-57

small chassis devices     3-8

DS-3 ATM interface, description (table)     6-63

during normal boot or reset, description     3-8

Ethernet interface, description (table)     6-3

FDDI DAS, description (table)     6-27  to 6-28

FDDI SAS interface, PHY, description (table)     6-31

front-access chassis devices     3-23

Gigabit Ethernet interface, description (table)     6-18

green

Ethernet interface     6-3

front-access chassis devices     3-23

Gigabit Ethernet interface     6-18

OC-3 ATM interface     6-57

OS-3 ATM interface     6-63

small chassis devices     3-8

OC-3 interface (table)     6-57

red

front-access chassis devices     3-23

small chassis devices     3-8

small chassis devices     3-8

licensed software options, enhanced RMON included with, overview     1-11  to 1-12

ART MIB Monitor     1-11

ATM PVC analysis     1-12

custom domain creation     1-12

Fast EtherChannel     1-11

Frame Relay DLCI analysis     1-12

NetFlow Monitor     1-11

Resource Monitor     1-11

roving     1-12

Shadow RMON1 MIB     1-12

VLAN Monitor     1-11

WAN Decompression     1-11

lightning activity, warning regarding use during     2-1

line

code

front-access chassis devices     3-25

small chassis devices     3-11

interface

front-access chassis devices     3-25

small chassis devices     3-11

rate

front-access chassis devices     3-25

small chassis devices     3-11

login types, overview     1-13

M

main power connector, warning regarding unplugging     2-2

management interface, configuring     5-6

manual

configuration using an ASCII terminal     5-9  to 5-12

connecting device to terminal     5-10

power-up sequence     5-11  to 5-12

warnings regarding     5-9  to 5-10

reset feature

front-access chassis devices     3-23

small chassis devices     3-9

modem

accessing CCO on     xxi

support, advanced feature     10-9  to 10-17

modem configuration commands, using     10-10  to 10-11

modem configuration tutorial     10-14  to 10-17

modem control strings, defining     10-12  to 10-13

modem control strings, using     10-11  to 10-12

modem log, using     10-13

modifying

encapsulation protocol (WAN only)     5-20  to 5-22

Ethernet connection type     6-4  to 6-6

warnings regarding     6-4  to 6-5

Fast Ethernet Half-Duplex interface speeds     5-19

caution regarding     5-19

read community names     7-1  to 7-2

server address     7-3  to 7-4

Token Ring and WAN interface speeds     5-15  to 5-18

write community names     7-3

modifying or assigning IP address, net mask and gateway address     5-13  to 5-15

monitor interface, configuring     5-6

mounting brackets, attaching to device     4-4  to 4-5

Multiport 10BaseT Ehternet devices, connecting to network     6-6

Multiport E1/D WAN model, as part of front-access chassis devices, overview     1-5

Multiport Ethernet model, as part of front-access chassis devices, overview     1-4

Multiport Fast Ethernet model

logical description     3-6

part of front-access chassis devices, overview     1-4

Multiport T1/D or E1/D WAN

model

logical description     3-6

T1/E1 WAN tap kit accessory     3-3

special interface options, configuring     7-32  to 7-44

Multiport T1/D WAN model, part of front-access chassis device group, overview     1-5

Multiport T1/E1 WAN model

accessories with, WAN tap kit     3-3

logical description     3-6

part of front-access chassis device group, overview     1-5

N

N1Host, protocol domain in RMON2 group, overview     1-10

N1Matrix, protocol domain in RMON2 group, overview     1-11

net mask, assigning or changing     5-13  to 5-15

NetFlow Monitor

enhanced RMON, overview     1-11

option, using     11-5  to 11-11

NetFlow, supported, overview     1-7

network

connecting devices to (see connecting devices to the network)

voltages present in WAN, warning regarding hazardous levels     2-1

Network Interface Cards (NICs) (interfaces 1 and 3), in small chassis devices     3-13

NICs (Network Interface Cards) (interfaces 1 and 3), in small chassis devices     3-13

notes, significance of     xix

null-modem crossover cable, cable pinouts for     C-10

O

OC-3 ATM

interface, in connecting devices to the network     6-51  to 6-58

model

accessories with, fiber-optic splitter     3-4

logical description     3-6

part of front-access chassis devices, overview     1-5

special interface options, configuring     7-48  to 7-50

organization of this document     xviii  to xix

P

Packet Capture, functionality in RMON1 group, overview     1-10

packet decoding and analysis, using data capture     10-19

parity

front-access chassis devices     3-25

small chassis devices     3-11

PCC interface (interface 2)     3-10  to 3-13

console ports     3-11  to 3-12

bits, number of, front-access chassis     3-25

bits, number of, small chassis devices     3-11

front-access chassis devices     3-24  to 3-25

line code, front-access chassis     3-25

line code, small chassis devices     3-11

line interface, front-access chassis     3-25

line interface, small chassis devices     3-11

line rate, front-access chassis     3-25

line rate, small chassis devices     3-11

parity, front-access chassis     3-25

parity, small chassis devices     3-11

small chassis devices     3-11  to 3-12

stop bits, number of, front-access chassis     3-25

stop bits, number of, small chassis devices     3-11

DIP switches     3-12  to 3-13

agent firmware, where loaded     3-13

front-access chassis devices     3-25  to 3-28

settings (table)     3-12

small chassis devices     3-12  to 3-14

front-access chassis devices     3-24  to 3-28

remote ports

front-access chassis devices     3-24

small chassis devices     3-10  to 3-11

small chassis devices     3-10  to 3-13

personnel, service, warning regarding qualifications of     2-2

physical description of SwitchProbe device     3-1  to 3-77

front-access chassis series (table)     3-5  to 3-6

small chassis series (table)     3-5

understanding different models     3-5  to 3-6

pinouts, pin designations for     C-1  to C-10

100BaseT4, RJ-45 connectors     C-9

100BaseTX, RJ-45 connectors     C-9

console and remote serial ports, RS-232     C-10

Ethernet AUI     C-1  to C-2

Fast Ethernet FDX tap, mini-DIN connectors     C-9

FDDI, RJ-12 connectors     C-8

null-modem crossover cable     C-10

Token Ring, RJ-45 connectors     C-7  to C-8

WAN     C-2  to C-7

power

connector, warning regarding unplugging     2-2

interval to wait before turning on     4-10

power-up sequence, description     5-11  to 5-12

sockets

small chassis devices     3-10

small chassis devices and, cautions regarding     3-10

source, connecting device to during after installation     4-9  to 4-10

switch

front-access chassis devices     3-29

small chassis devices     3-9

systems, warning regarding type to use     2-2

warnings regarding

turning off prior to work on system     4-1

unplugging     2-2

Power Out socket, do not use, caution regarding     4-9

private routes, configuring     10-26  to 10-28

probe mode, selecting     7-5

probeConfig, protocol domain in RMON2 group, overview     1-11

ProtocolDir, protocol domain in RMON2 group, overview     1-10

ProtocolDist, protocol domain in RMON2 group, overview     1-10

protocols, encapsulation, changing (WAN only)     5-20  to 5-22

Q

quit (command), using     8-5

R

read community name, changing     7-1  to 7-2

rear panel, descriptions

front-access chassis series     3-28  to 3-30

illustrations     3-28

power switch     3-29

small chassis series     3-9  to 3-14

illustration     3-9

red LEDs

front-access chassis devices     3-23

small chassis devices     3-8

remote

port, in PCC interface (interface 2)

front-access chassis device specifications (table)     3-25

front-access chassis devices     3-24

small chassis device specifications (table)     3-11

small chassis devices     3-10  to 3-11

serial ports, RS-232, cable pinouts for     C-10

Remote Monitoring Management Information Base, supported, overview     1-7

Resource Monitor

enhanced RMON, overview     1-11

option, using     11-2  to 11-5

restricted access areas, warning regarding     2-1

RMON groups used by TrafficDirector

overview     1-8  to 1-11

RMON1 overview

Alarms     1-10

definition     1-8

Events     1-10

Filters     1-10

history and content     1-9  to 1-10

History mini-RMON     1-9

Host TopN     1-9

Hosts     1-9

Packet Capture     1-10

Statistics mini-RMON     1-9

Token Ring     1-10

Traffic Matrix     1-9

RMON2

A1Host, overview     1-11

A1Matrix, overview     1-11

AddressMap, overview     1-10

content     1-10  to 1-11

RMON2 overview

definition     1-8

N1Host     1-10

N1Matrix     1-11

probeConfig     1-11

ProtocolDir     1-10

ProtocolDist     1-10

usrHistory     1-11

RMON1 and RMON2 parameters

configuring     7-59  to 7-61

defaults, configuring     7-61  to 7-62

for DLCIs

setting     9-8

specifying     9-6  to 9-7

RMON-MIB (Remote Monitoring Management Information Base), supported, overview     1-7

router discovery, overview     1-12

roving

agent, assigning     10-37  to 10-38

Cisco enhanced RMON functionality, overview     1-12

RS-232, now EIA/TIA-232     2-2

RS-449, now EIA/TIA-449     2-2

S

safety cover, warning regarding     4-1

SC-duplex-to-dual-SC-duplex fiber-optic cable accessory, with

Gigabit Ethernet model     3-2

OC-3 ATM model     3-4

SC-to-MIC

coupler accessory, with

Fast Ethernet 100BaseFX Full-Duplex model     3-2

Multiport Fast Ethernet 100BaseFX Full-Duplex model     3-2

fiber-optic cable accessory, with

Fast Ethernet 100BaseFX Full-Duplex model     3-2

Fast Ethernet 100BaseFX Half-Duplex model     3-2

SC-to-SC

DX single-mode fiber-optic cable accessory, with Gigabit Ethernet model     3-2

fiber-optic cable accessory, with

Fast Ethernet 100BaseFX Full-Duplex model     3-2

Fast Ethernet 100BaseFX Half-Duplex model     3-2

FDDI DAS model     3-3

FDDI SAS model     3-3

multi-mode fiber-optic cable accessory, with

Gigabit Ethernet model     3-2

OC-3 ATM model     3-4

SC-to-ST

coupler accessory, with

Fast Ethernet 100BaseFX Full-Duplex model     3-2

Multiport Fast Ethernet 100BaseFX Full-Duplex model     3-2

fiber-optic cable accessory, with

Fast Ethernet 100BaseFX Full-Duplex model     3-2

Fast Ethernet 100BaseFX Half-Duplex model     3-2

security

features, overview     1-13

options, setting     10-18  to 10-24

access levels, setting     10-20

access list examples     10-24

access list security feature, using     10-20  to 10-24

access list security, disabling     10-23

access list, configuring     10-21  to 10-23

address groups, defining     10-21

console logout feature, using     10-19

data capture, using for packet decoding and analysis     10-19

Serial Line Internet Protocol (SLIP) port, in PCC interface (interface 2)     3-24

front-access chassis devices     3-24

specifications (table)     3-25

small chassis devices     3-10  to 3-11

specifications (table)     3-11

serial line internet protocol support, using     10-3  to 10-9

SLIP address, selecting     10-3

SLIP configuration overview     10-3  to 10-4

SLIP configuration tutorial     10-4  to 10-9

server address, changing     7-3  to 7-4

service personnel, warning regarding qualifications of     2-2

set (command), using     8-4

shadow MIB implementations, guidelines     A-1  to A-5

ATM shadow MIB     A-5  to A-6

FDDI shadow MIB     A-1  to A-3

WAN shadow MIB     A-4  to A-5

Shadow RMON MIB, Cisco enhanced RMON extension, overview     1-12

Simple Network Management Protocol (see SNMP)

site requirements     2-1  to 2-2

appropriate physical connection to

management software     2-2

network link to be monitored     2-2

power source     2-1

warnings regarding     2-1  to 2-2

standard office environment     2-1

tabletop or rack mounted     2-1

SLIP

address, selecting     10-3

configuration

overview     10-3  to 10-4

tutorial     10-4  to 10-9

port, in PCC interface (interface 2)     3-24

front-access chassis device specifications (table)     3-25

front-access chassis devices     3-24

small chassis device specifications (table)     3-11

small chassis devices     3-10  to 3-11

routing

configuring     10-29  to 10-30

using     10-28  to 10-30

small chassis devices

bits, number of     3-11

comparison to front-access chassis devices, overview (table)     1-6

Ethernet model, description     3-14  to 3-18

front panel, description     3-7  to 3-9

line

code     3-11

interface     3-11

rate     3-11

overview     1-3

parity     3-11

rear panel, description     3-9  to 3-14

SLIP port in     3-10  to 3-11

specifications     3-11

stop bits, number of     3-11

Token Ring model, description     3-18  to 3-19

using     3-7  to 3-21

WAN and Ethernet/Token Ring models, description     3-20  to 3-21

SMON (Switch Monitoring), supported, overview     1-7

SNMP (Simple Network Management Protocol)

supported, overview     1-7

trap ports and destinations, configuring     10-33  to 10-34

software options, special licensed, using

ART MIB     11-14  to 11-19

enabling options     11-21

Fast EtherChannel     11-20

NetFlow Monitor     11-5  to 11-11

Resource Monitor     11-2  to 11-5

VLAN Monitor     11-11  to 11-14

WAN Decompression     11-20  to 11-21

specifications of devices     B-1  to B-3

specifying frame relay DLCIs manually     9-3  to 9-5

splitter tap (see fiber-optic splitter tap)

standards supported by SwitchProbe devices, overview     1-7  to 1-12

Cisco proprietary

ART     1-8

CDP     1-8

FEC     1-8

NetFlow     1-7

VLAN ISL     1-7

WAN Decompression     1-8

emerging standards

ATM RMON     1-7

HCRMON     1-7

SMON     1-7

industry standards

RMON-MIB     1-7

SNMP     1-7

static routes, configuring     10-25  to 10-26

Statistics, mini-RMON in RMON1 group, overview     1-9

stop bits, number of

front-access chassis devices     3-25

small chassis devices     3-11

Switch Monitoring (SMON), supported, overview     1-7

SwitchProbe device

accessories (see accessories)

customizing (see customizing SwitchProbe devices)

Ethernet model

description     3-14  to 3-18

Dual Interface SwitchProbe device, description     3-16  to 3-18

Single Interface SwitchProbe device, description     3-15  to 3-16

front-access chassis

mounting in rack (see installing front-access chassis)

initializing (see initializing a SwitchProbe device)

installing (see installing SwithProbe device)

interface modes

small chassis     3-13  to 3-14

interface numbers

small chassis     3-14

physical description     3-1  to 3-77

understanding front-access chassis series (table)     3-5  to 3-6

understanding small chassis series (table)     3-5

specifications     B-1  to B-3

Token Ring model

description     3-18  to 3-19

unpacking     3-1  to 3-4

WAN and Ethernet/Token Ring models

description     3-20  to 3-21

SwitchProbe devices

agent routing, overview     1-13

default groups, definition     1-12

enhanced RMON extensions included with software options, overview     1-11  to 1-12

ART MIB Monitor     1-11

ATM PVC analysis     1-12

custom domain creation     1-12

Fast EtherChannel     1-11

Frame Relay DLCI analysis     1-12

NetFlow Monitor     1-11

Resource Monitor     1-11

roving     1-12

Shadow RMON1 MIB     1-12

VLAN Monitor     1-11

WAN Decompression     1-11

enhanced RMON extensions, overview     1-11  to 1-12

front-access chassis devices, overview     1-3  to 1-6

how used, overview     1-2

overview     1-1  to 1-13

front-access chassis devices     1-3  to 1-6

how SwitchProbe devices are used     1-2

small chassis devices     1-3

RMON groups used by TrafficDirector

overview     1-8  to 1-11

RMON1, definition     1-8

RMON1, overview     1-9  to 1-10

RMON2, definition     1-8

RMON2, overview     1-10  to 1-11

router discovery, overview     1-12

security features, overview     1-13

small chassis devices, overview     1-3

standards supported with, overview     1-7  to 1-12

ART     1-8

ATM RMON     1-7

CDP     1-8

FEC     1-8

HCRMON     1-7

NetFlow     1-7

RMON-MIB     1-7

SMON     1-7

SNMP     1-7

VLAN ISL     1-7

WAN Decompression     1-8

TrafficDirector, compatibility with, overview     1-7

T

T1/E1 WAN tap kit, accessory with

Channelized T1/E1 WAN model     3-3

Multiport T1/D or E1/D WAN model     3-3

tap cable, accessory with HSSI model     3-4

telecommunications line

cord, and fire hazard, warning regarding     2-2

and open housing, warning regarding     2-2

and power connector, warning regarding     2-2

Telnet, accessing CCO on     xxi

three-stall tap rack panel accessory, with

DS-3 ATM model     3-4

Gigabit Ethernet model     3-2

Token Ring

changing inteface speeds     5-15  to 5-18

functionality in RMON1 group, overview     1-10

interfaces

assigning     10-36

in connecting devices to the network     6-26

speed, changing     5-15  to 5-18

model

description     3-18  to 3-19

part of small chassis device group, overview     1-3

RJ-45, cable pinouts for     C-7  to C-8

Traffic Matrix, functionality in RMON1 group, overview     1-9

TrafficDirector

recommended releases for compatibility     1-7

RMON groups used by

overview     1-8  to 1-11

RMON1, definition     1-8

RMON1, overview     1-9  to 1-10

RMON2, definition     1-8

RMON2, overview     1-10  to 1-11

translated safety warnings     D-1  to D-31

typographical conventions in this document     xix  to xx

U

understanding different SwitchProbe models     3-5  to 3-6

front-access chassis series (table)     3-5  to 3-6

small chassis series (table)     3-5

unpacking a SwitchProbe device     3-1  to 3-4

accessories shipped with (see accessories with SwitchProbe devices)

carton contents     3-1  to 3-4

accessories (see accessories with SwitchProbe device)

power cord     3-1

SwitchProbe device     3-1

USER login type, overview     1-13

usrHistory, protocol domain in RMON2 group, overview     1-11

V

VLAN ISL (Inter-Switch Link), supported, overview     1-7

VLAN Monitor

enhanced RMON included with software options, overview     1-11

option, using     11-11  to 11-14

VPI size, specifying     9-9  to 9-10

VPIs/VCIs, monitoring

ATM devices, using     9-9  to 9-12

ATM PVC, specifying     9-10  to 9-12

specifying VPI size     9-9  to 9-10

W

WAN

cable pinouts for     C-2  to C-7

encapsulation protocol, changing     5-20  to 5-22

interface, changing speeds     5-15  to 5-18

interface, in connecting devices to the network     6-33  to 6-48

caution regarding     6-34

warnings regarding     6-33

model accessory, WAN tap kit     3-3

ports, warning regarding network voltages in     2-1

shadow MIB, guidelines for use     A-4  to A-5

special interface options, configuring     7-12  to 7-14

tap kit, accessory with

Multiport T1/E1 WAN model     3-3

WAN model     3-3

WAN and Ethernet/Token Ring model

description     3-20  to 3-21

part of small chassis device group, overview     1-3

WAN Decompression

enhanced RMON included with software options, overview     1-11

option, using     11-20  to 11-21

protocol supported in SwitchProbe devices     1-8

WAN DLCIs, monitoring     9-1  to 9-12

DLCI trapping     9-6

frame relay DLCIs

automatically discovering     9-2  to 9-3

manually configuring     9-4  to 9-5

manually specifying     9-3  to 9-5

WAN devices, using     9-1  to 9-6

warnings

regarding

AS/NZA 3260 (service personnel qualifications)     2-2

blank faceplates and cover panels     4-2

class1 laser products     6-2

connecting devices to the network     6-2

cover, safety, must be in place during operation     4-1

damage to equipment     4-2

disposal of this product     4-1

fire hazard, and telecommunications line cord     2-2

fuse or circuit breaker ratings to use     2-1

grounding equipment     4-9

hazardous network voltages in WAN ports     2-1

housing, opening     2-2

injury while mounting equipment on rack     4-4

installation instructions, reading before installation     2-1

installing SwitchProbe device     4-1  to 4-2

laser radiation, avoiding     6-2

lightning activity, use during     2-1

main power connector, unplugging     2-2

mounting SwitchProbe device in an equipment rack     4-4

network voltages in WAN ports     2-1

overheating of device     4-4

personnel, service, qualifications of     2-2

power connector, unplugging     2-2

power systems for use with SwitchProbe device     2-2

power, turning off prior to working on system     4-1

product disposal     4-1

qualifications of service personnel     2-2

restricted access areas     2-1

safety cover, must be in place during operation     4-1

service personnel, qualifications of     2-2

short-circuit protection     2-1

telecommunication line, cord rating and fire hazard     2-2

telecommunications lines, when to disconnect     2-2

Token Ring interfaces, configuring to the correct speed     4-2

unplugging main power connector     2-2

WAN interface, connecting to network     6-33

WAN ports, network voltages in     2-1

wearing jewelry and other metal objects while working on system     4-2

significance of     xx

translated     D-1  to D-31

world-wide web, accessing

additional Cisco documentation on     xvii

CCO on     xx

write community name, changing     7-3

Y

yellow LEDs (see amber LEDs)

Posted: Wed Oct 2 08:11:44 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.