Table of Contents

Numerics
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W

index

Numerics

1062-Mbps clock (table)   A-12

1062-Mbps clock for coupling link (table)   A-10

10BASE-T cable, wiring (table)   B-3

1250-Mbps clock (table)   A-12

128-channel ESCON system

32-channel TDM4E modules   6-10

connecting equipment   7-2

description   1-10

NEMI master required   7-6

16-channel WCM

description   1-10

2.488-Gbps clock (table)   A-13

32-channel WCM

description   1-10

jumper connections   6-5

622-nm Mbps clock (table)   A-8

850-nm multiclock (table)   A-15

A

adding

extension chassis   1-6

modules   4-2  to 4-6

airflow system   1-14

attenuating

cable   5-12

coupler   5-12

B

band splitter modules. See BSMs

BSMs

connecting remote lines   5-7

connecting to RSMs   5-6

description   1-2, 1-24

optical connectors   1-25

optical connectors (figure)   1-26

specifications   A-24

C

cables

attenuating single-mode patch   5-12

multimode patch   5-13

optical, connecting   5-1

serial null modem   B-1

specifications (table)   B-4

testing   2-2

chassis

adding extension   1-6

description   1-11

dimensions (figure)   1-11

extension (figure)   1-7

primary (figure)   1-6

primary DMX connectors (figure)   1-24

primary MUX connectors (figure)   1-24

rear view (figure)   1-9

specificatons   A-3

system modules   1-11

checklists

Cisco authorized personnel   2-5

customer   2-6

Cisco authorized personnel checklist   2-5

Cisco Metro 1500 series system

communication links   1-6

description   1-1

modules   1-15

structure   1-4

cleaning

chassis   3-19

connectors   3-19

guidelines   3-19, 3-20

communication channels   1-2  to 1-10

DWDM   1-2

configuration options

chassis   A-1

typical configuration (figure)   1-5

connecting

16-channel WCM system jumpers   6-1

32-channel WCM system jumpers   6-5

AC power   3-8

BSMs to DMX   5-4

BSMs to MUX   5-4

BSMs to remote lines   5-7

BSMs to RSMs   5-6

DC power   3-11

DEMI equipment   7-1

Fibre Channel limitations   5-13

Fibre Channel restrictions   5-13

Fibre Channels to WCMs   5-12

Gigabit Ethernet limitations   5-13

Gigabit Ethernet restrictions   5-13

Gigabit Ethernet to WCMs   5-12

local lines to WCM   5-10

local lines to WCM (figure)   4-5, 5-11

local lines to WCMs   5-10

NEMI equipment   7-1

NEMI to Ethernet hubs   7-6

optical cables   5-1

optical isolators   5-15

power   3-8

remote lines to BSMs   5-7

remote lines to RSMs   5-9

system   3-4

WCMs to DMX   5-2

WCMs to MUX   5-2

connectors

cleaning   3-19

fiber optic   3-20

WCM, optical (figure)   1-22

connector signals, DB9 serial (table)   C-2

conventions

documentation   xvi

coupler

attenuating   5-12

customer

checklists   2-6

responsibilities   2-5

D

DB9 serial connector signals (table)   C-2

DEMI

connecting to NEMI   7-2

description   1-41

installing   3-7

installing (caution)   3-7

LEDs   1-43

placement   1-42

placement (figure)   1-42

ports   1-42

ports (figure)   1-43

specifications   A-28

demultiplexer. See DMX

dense wavelength division multiplexing. See DWDM

dimensions

chassis   1-11

chassis (figure)   1-11

DMX

BSM connections   5-4

description   1-22

function   1-33

location (figure)   1-23

specifications   A-21  to A-23

WCM connections   5-2

documentation

audience   xiii

conventions   xvi

new and changed   xiv

organization   xiv

organization of   xiv

related   xix

DWDM

communication channels   1-2

description   1-1, 1-2

E

electrical safety   2-7

Enterprise System Connection. See ESCON

ESCON

128 channel   1-10

description   1-32

interfaces   1-31

optical interfaces   1-32

Ethernet hub

cabling   7-6

connecting to NEMI   7-6

NEMI modules   7-6

extension chassis, adding   1-6

extension chassis A

figure   1-7

MUX and DMX support   A-22

extension chassis B

figure   1-7

MUX and DMX support   A-22

extension chassis C

figure   1-8

MUX and DMX support   A-23

eye safety   2-8

F

fans

airflow   1-14

LEDs   1-14

module   1-14

replacing   1-14

fiber optic connectors

description   3-19

function   3-19

Fibre   5-13

Fibre Channels

connecting limitations   5-13

connecting to WCMs   5-12

G

Gigabit Ethernet

connecting limitations   5-13

connecting restrictions   5-13

connecting to WCM   5-12

grounding

chassis   3-18

connections   3-18

H

high-speed multiclock specifications (table)   C-4

hot-swappable

PSMs   3-24

I

installing

DEMI   3-7

DEMI (caution)   3-7

modules   4-2, 4-3

modules (caution)   4-3

NEMI   3-5

NEMI (caution)   3-6

PSMs   3-21

system   3-4

system, responsibilities   2-4

terminal blocks   3-11

tools required   4-2

troubleshooting   3-28

International Telecommunication Union (ITU)   1-2

J

jumper connections

16-channel WCM lengths (tables)   6-1

32-channel TDM4E lengths (table)   6-10

32-channel TDM4E system   6-10

32-channel WCM lengths (tables)   6-5

connecting 16-channel WCM system   6-1

K

keyswitch

AC-power   3-21

description   3-8

L

labeling descriptions, WCMs   1-12

local lines

connecting to WCM (figure)   4-5, 5-11

connecting to WCMs   5-10

low-speed multiclock specifications (table)   C-3

M

maintaining network records   3-3

measuring

channel budgets   3-26

channel outputs   3-26

guidelines   3-26

MiniSC connector   1-35

modules

adding   4-2  to 4-6

available (table)   4-1

BSMs   5-4

DMX   5-4

installing tools   4-2

MUX   5-4

NEMI connections   7-6

removing   4-6

replacing   4-2  to 4-6

WCMs to DMX connections   5-2

WCMs to MUX connections   5-2

monitoring, technical operation conditions (table)   C-3

mounting

recommendations   3-3

system   3-3

multiclock specifications (table)

high-speed   C-4

low-speed   C-3

multiplexer. See MUX

MUX

architecture (figure)   1-3

BSM connections   5-4

description   1-22

function   1-33

location (figure)   1-23

specifications   A-21  to A-23

WCM connections   5-2

N

NEMI

connecting master to slave   7-6

connecting to DEMI   7-2

description   1-38

installing   3-5

installing (caution)   3-6

LEDs   1-41

network connections   1-39

placement   1-39

placement (figure)   1-39

ports   1-39

ports (figure)   1-40

software   C-1

specifications   A-25

using with RSM   1-27

network records, maintaining   3-3

O

online testing

description   3-25

guidelines   3-25

running   3-25

operation conditions, monitoring (table)   C-3

optical connectors

BSMs   1-25

BSMs (figure)   1-26

description   1-21

MUX and DMX   1-23

MUX and DMX (figure)   1-24

RSMs   1-29

RSMs (figure)   1-28

TDM4E   1-35

TDM4E(figure)   1-35

WCM   1-21

WCM (figure)   1-22

optical isolator

connecting   5-15

connection scenario (figure)   5-15

description   5-14

installation notes   5-14

placement   5-14

specifications   A-19

organization, of documentation   xiv

overdrive

attenuation   5-12

avoiding   5-12

P

pin connections   B-3

power

connecting   3-8

consumption   3-17

cord selection   2-3

DC connections   3-11

front panel   3-22

fuses   3-17

grounding   3-18

keyswitch   3-8, 3-21

requirements   2-2

See also PSMs

power supply modules. See PSMs

preparing, the site   2-3

primary chassis

figure   1-6

MUX and DMX specifications   A-21

PSMs

description   1-14

failure   3-23

figure   3-22

functions   3-21

installing   3-21

LEDs   3-23

rear view (figure)   3-24

removing   3-21

replacing   3-23

troubleshooting   3-23

See also power

push buttons

description   1-28

RSMs   1-28

R

receivers and transmitters, WCM (table)   C-3

redundancy

PSMs   3-21

remote lines

connecting to BSMs   5-7

RSMs   5-9

remote links

budget (caution)   5-14

testing   2-2, 5-16

tests required (table)   5-16

remote switch modules. See RSMs

removing

modules   4-6

PSMs   3-21

replacing

fans   1-14

modules   4-2  to 4-6

PSMs   3-23, 3-24

RSMs

automatic mode   1-30

connecting remote lines   5-9

connecting to BSMs   5-6

description   1-2, 1-26

front panel (figure)   1-28

LEDs   1-29

lock mode   1-30

operation modes   1-30

optical connectors   1-29

optional   5-6

push buttons   1-28

specifications   A-24

S

safety

electrical   2-7

eye   2-8

preinstall   2-1

serial connector signals, DB9 (table)   C-2

serial null modem cable, wiring (table)   B-1

single-mode fiber   1-2

site preparation   2-3

SNMP

features   A-26  to A-27, C-2

specifications

BSMs   A-24

cables (table)   B-4

chassis   A-3

DEMI   A-28

DMX   A-21  to A-23

MUX   A-21  to A-23

NEMI   A-25

optical isolator   A-19

RSMs   A-24

TDM4E   A-16

WCMs   A-4  to A-16

system

connecting   3-4

installing   3-4

mounting   3-3

testing   3-4

unpacking   3-2

T

TDM4E

configuration   1-32  to 1-33

description   1-31

interfaces   1-32

LEDs   1-36

multiplexer architecture   1-34

optical connectors   1-34

optical connectors (figure)   1-35

specifications   A-16

system configuration (figure)   1-32

technical operation conditions, monitoring (table)   C-3

terminal blocks

installing   3-11

testing

cables   2-2

online   3-25

remote links   2-2, 5-16

system   3-4

transmitters and receivers, WCM (table)   C-3

troubleshooting

installing   3-28

PSMs   3-23

tips   3-28

U

unpacking, the system   3-2

UTP-X cable   B-2

V

verifying

connections   3-25

W

warnings

safety   F-1

translated   F-1

WCMs

16-channels   1-10

32-channels   1-10

automatic laser shutdown   1-16

available types   1-16

chassis connections   5-3

clock recovery LEDs   1-19

configuration data (table)   C-2

connecting local lines   5-10

connecting to local lines (figure)   4-5, 5-11

data rate transparent   1-17  to 1-18

data rate transparent, LEDs   1-18

labeling   1-12, 1-21

labeling descriptions   1-12

local line connections   5-10

optical connectors   1-21

receivers and transmitters (table)   C-3

SNMP features   C-2

specifications   A-4  to A-16

testing remote links   5-16

with clock recovery   1-2, 1-18  to 1-19

with settable clock recovery   1-20

wiring

10BASE-T (table)   B-3, B-4

serial null modem cable (table)   B-1

Posted: Fri Aug 2 14:45:58 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.