Table of Contents
index
- 850nm Multiclock 10-15
- air flow system 2-12
- band splitter module. See BSM
- BSM
- connecting MUX and a DMX to 4-8
- connecting remote lines to 4-11
- connecting RSM to 4-10
- description 2-2, 2-16, 7-1
- installation 7-2
- optical connectors 7-1
- specifications 10-19
- cable testing 3-2
- channel card labeling descriptions 2-11
- chassis
- description 2-9
- dimensions (figure) 2-10
- parts 2-12
- rear view (figure) 2-8
- specification 10-4
- configuration
- extension chassis configuration options 10-2
- primary chassis configuration options 10-2
- typical configuration (figure) 2-4
- unit 10-1
- conventions of the guide xv
- DEMI
- description 2-17
- specification 10-23
- demultiplexer. See DMX
- dense wavelength division multiplexing. See DWDM
- DMX
- connecting to WCM 6-5
- description 2-2, 2-16
- installation 6-3
- location (figure) 6-1
- primary chassis specifications 10-16
- documentation
- feedback xix
- ordering xvii
- DWDM 2-16, 6-1
- electrical safety 1-2
- extension chassis A
- (figure) 2-6
- configurations 10-2
- MUX and DMX
- support 10-17
- extension chassis B
- (figure) 2-6
- configurations 10-3
- MUX and DMX support 10-17
- extension chassis C
- (figure) 2-7
- configurations 10-3
- MUX and DMX
- support 10-18
- eye safety 1-2
- fan system replacement 2-12
- International Telecommunication Union (ITU) 2-1
- LAN 2-1
- MAN 2-1
- mounting 4-3
- multiplexer. See MUX
- MUX
- connecting to WCM 6-5
- described 2-2, 2-16, 6-1
- installation 6-3
- primary chassis specifications 10-16
- MUX and DMX modules 2-16
- NEMI
- described 2-17
- specifications 10-20
- using with RSM 8-1
- optical connectors 5-1, 6-2
- organization of the guide xiv
- power cord selection 1-2
- power requirements 3-2
- primary chassis 2-5, 10-2
- MUX and DMX
- specifications 10-16
- PSMs
- described 2-12
- remote link testing 3-3
- remote switch module. See RSM
- RSM
- automatic mode 8-8
- described 2-3, 2-16, 8-1
- installation 8-4
- LEDs 8-3
- lock mode 8-8
- operation 8-8
- optical connectors 8-4
- pushbuttons 8-3
- specifications 10-19
- safety
- electrical 1-2
- eye 1-2
- single-mode fiber 2-1
- specifications 10-1
- wavelength 5-1
- wavelength division multiplexing channel modules. See WCMs
- WCM
- adding and replacing 5-2
- channel modules 2-15
- connecting with MUX and DMX 4-6
- described 2-15, 5-1
- installation 2-2
- labeling descriptions 2-11
- removing 5-6
- specifications 10-5
Posted: Tue Jan 23 11:15:24 PST 2001
All contents are Copyright © 1992--2001 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.
