Table of Contents

INDEX

Symbols

# character     10-11

Numerics

100Base FX interface specifications     B-3

100Base FX network, connecting

using MIC connectors     6-16, 6-25

using SC connectors     6-23

using ST connectors     6-14, 6-24

100Base TX and 100BASE T4 connectors     C-7

100Base TX interface specifications     B-3

A

access lists     1-13

changing     10-22

disabling security     10-23

incorrect configurations     10-23

access permissions (priorities, levels, and rights)     10-19

access_list (command-line option)     8-5

adapter damage     6-7

address groups     10-20

agent (command-line option)     8-5

agent code     1-1

Agent Configuration Utility

accessing     5-7, 5-20

for configuring interfaces

Eight-Port Ethernet     3-30

Ethernet     3-14

Ethernet and Token Ring     3-17

Fast Ethernet Dual Interface     3-36

Four-Port Ethernet     3-29

for configuring modes     3-25, 3-42

Console Logout     10-19

local access     5-2

menu, main     7-3

remote access     5-2

resetting     5-8

security options     10-17

agent firmware     1-6

agent inaccessibility     6-33

agent_contact (command-line option)     8-5

agent_location (command-line option)     8-5

agent_name (command-line option)     8-5

agent_options (command-line option)     8-6

agent_options parameter     1-12

agentname (command-line option)     10-29

aggregate traffic of Fast Ethernet segments     11-4

al_hosts (command-line option)     8-13

al_matrix (command-line option)     8-13

alarms group, RMON1     1-9

amber LED     3-6, 5-10, 6-4, 6-30

See also LEDs

analyzer port     10-35

application response time (ART)

boundaries     11-10

counters     11-11

statistics     11-4, 11-9, 11-11

application response time-out value     11-11

application-layer host statistics, RMON2     1-10

ART MIB Monitor     1-11, 11-4

ART MIB parameters, changing     11-9  to 11-11

art_report_interval (command-line option)     8-7

art_report_size (command-line option)     8-7

art_resp_time (command-line option)     8-6

artmib options     8-6

ASCII terminal, to configure SwitchProbe Device     3-9, 3-23, 5-8

ASCII text strings as arguments     8-16

ATM interface     8-7

LEDs     6-36

specifications     B-3

ATM MIB variable     A-5

ATM Permanent Virtual Channel (PVC)     1-11, 8-7

ATM RMON     1-7

ATM shadow MIB, implementing     A-5

ATM statistics information mapped to Ethernet RMON MIB (table)     A-5

ATM SwitchProbe Device     3-54, A-5

connecting to fiber-optic splitter     6-40

descriptive summary     1-5

front panel (figure)     3-55

interfaces     3-56

out-of-band management connection     6-41

side-band management connection     6-42

VPI/VCI monitoring     9-1, 9-7

ATM traffic, monitoring     A-1

atm_maxvpibits (command-line option)     8-7

atm_pvc (command-line option)     8-9

atmmib options     8-8

automatic configuration of SwitchProbe Device     5-6

automatic discovery feature     9-1

B

beep when powering up     5-10

blinking LED     6-29

BOOTP server, configuring SwitchProbe Device automatically     5-6

C

cable

Category 5 FTP crossover     6-8

Category 5 FTP straight-through     6-19

Category 5 UTP crossover     6-8

Category 5 UTP straight-through     6-19

DCE label, with     6-40

DTE label, with     6-40

EIA/TIA-449     6-30

EIA-530     6-30

no cable attached LED     6-18

OC-3 multimode fiber     6-36

pinouts     C-1

SC to ST     6-14

SC-duplex-to-dual-SC-duplex multimode fiber     6-11

SC-duplex-to-SC-duplex multimode fiber     6-38

SC-to-MIC     6-16

Type 1 foil twisted-pair (FTP)     6-28

Type 2 unshielded twisted-pair (UTP)     6-28

V.35     6-30

X.21     6-30

Category 5 FTP crossover cable     6-8

Category 5 FTP straight-through cable     6-19

Category 5 UTP crossover cable     6-8

Category 5 UTP straight-through cable     6-19

Change admin_password     10-17

Change art_report_interval     11-11

Change art_report_size     11-11

Change art_resp_time1     11-10

Change art_resp_time2     11-10

Change art_resp_time3     11-10

Change art_resp_time5     11-10

Change art_resp_time6     11-10

Change art_resp_timeout     11-11

Change capture slice size     10-17

Change Server Address option     7-4

Change user_password     10-17

changing

access lists     10-22

ART MIB parameters     11-9  to 11-11

default gateway address     10-6

encapsulation protocol (WAN)     5-20  to 5-22

Ethernet connection type (figure)     6-5

FASTMIB feature     10-33

gateway address     5-14

Half-Duplex Fast Ethernet default interface speed     5-19

interface modes     3-25

IP address     5-13

net mask     5-14

Read Community name     7-2

Server Address     7-4

subnet mask     10-6

Token Ring and WAN interface speed     5-15  to 5-18

Write Community name     7-3

channel service unit/data service unit. See CSU/DSU     6-31

circuit breaker     2-1, 5-9

circuits

safety extra-low voltage (SELV)     6-19

telephone-network voltage (TNV)     6-19

Cisco Discovery Protocol (CDP)     1-7, 10-33

Cisco High-Level Data Link Control (HDLC)     5-5

Cisco proprietary standards     1-7

class 1 laser products     6-2

clear access_list (command-line option)     10-23

clear command     10-27

client/server pairs, maximum number of     11-11

command-line

mode     8-1

IP-DATAFILTER     10-31

to configure ATM PVCs     9-9

to specify VPI size     9-8

objects (options)     8-5

overview screen     8-2

syntax     8-3

configuration

default for Token Ring interface     6-28

factory installed for Ethernet interface     6-3

Token Ring dual homing     6-28

configuring

access list security     10-21

aggregate traffic through virtual interface (NetFlow)     11-7

default domain     7-18

Dual Interface Ethernet SwitchProbe Device     3-14

Eight-Port Ethernet SwitchProbe Device     3-29

Ethernet and Token Ring SwitchProbe Device     3-17

Fast Ethernet devices for NetFlow packets     11-8

Four-Port Ethernet SwitchProbe Device     3-28

management interface     5-5

Multiport Fast Ethernet interface ports for monitoring modes     3-42

Remote port     3-8

RMON1/RMON2 default parameters     7-22

Single Interface Token Ring SwitchProbe Device     3-15

SLIP routing     10-28

SNMP trap ports and destinations     10-31  to 10-32

SwitchProbe Device manually via ASCII terminal     3-9, 3-23, 5-8

WAN and Ethernet/Token Ring SwitchProbe Device     3-18

connect_protocol (modem control string)     10-11

connect_retry (modem control string)     10-12

connect_string (modem control string)     10-11

connect_time (modem control string)     10-11

connecting

100Base FX network     6-24

using MIC connectors     6-16, 6-25

using SC connectors     6-23

using ST connectors     6-14

ATM SwitchProbe Device to network     6-39

fiber-optic splitter tap to network     6-22

fiber-optic splitter to ATM network (figure)     6-41

fiber-optic splitter to ATM SwitchProbe Device     6-40

fiber-optic splitter to network     6-39

HSSI interface to network     6-34

SwitchProbe Device to network     6-1

Console Logout function     10-19

console menus     5-2

Console port     3-9, 3-23, 5-8, 8-1

converting

Fast Ethernet to Fast EtherChannel     3-46

WAN traffic to Ethernet traffic     A-4

creating IP filters     10-29

critical links, monitoring     11-3

crossover cable     5-9, 6-8, C-9

CSU/DSU     6-31

curr_interface     8-9

D

damage

from shipping     3-1, 3-2

through cabling     6-28

to connector pins     6-31

DAS, for connecting to Token Ring network     6-28

data     8-9

data capture     10-18

data circuit-terminating equipment. See DCE

Data Link Connection Identifier. See DLCI

data terminal equipment. See DTE     6-31

data-link layer conversations and hosts     8-8

date, setting in SwitchProbe Device     8-9

DB26 connector     6-34

DCE

cable labeled     6-21, 6-40

interface card for     3-38, 3-39

dce_cir (command-line option)     9-4

DCE-to-DTE frames     A-5

default configuration

of Interface 1     3-28, 3-30

of Token Ring interface     6-28

default gateway address     5-14, 10-6

default groups     1-12

default_groups (command-line option)     8-6

default interface speed, Half-Duplex Fast Ethernet     5-19

default mode     3-25

default ring speed     5-7, 5-15

default RMON2 protocol domains     7-18

default_groups     8-6

deinstalling software options     11-6

deleting DLCIs from WAN interface     9-4

DIAG LED label     3-22

dimensions (H x W x D). See SwitchProbe Device specifications

DIP switches and settings     3-10

disabling

access list security     10-23

FASTMIB feature     10-34

discard_dribbles option—Fast Ethernet Interfaces     7-14

disconnect_time (modem control string)     10-12, 10-17

disconnecting DC power     5-9

discover_wanspeed (command-line option)     7-18, 8-6

display (spec). See SwitchProbe Device specifications

dlc (command-line option)     8-9

dlc_proto (command-line option)     8-9

DLCI     1-11, 3-50

configuring for RMON1/RMON2     9-5

interface creation, automated     9-1

manually configured effective upon reset     9-4

RMON1 parameters     9-6

RMON2 parameters     9-6

traps     9-5

virtual interfaces     9-3

and VPI/VCI monitoring     9-1

dlci_al_hosts (command-line option)     8-14

dlci_al_matrix (command-line option)     8-14

dlci_lh_buckets (command-line option)     8-13

dlci_lh_interval (command-line option)     8-13

dlci_nl_hosts (command-line option)     8-14

dlci_nl_matrix (command-line option)     8-14

dlci_number (command-line option)     9-3, 9-4

dlci_sh_buckets (command-line option)     8-13

dlci_sh_interval (command-line option)     8-13

do command     8-4

documentation

CD-ROM version     xiii

Web access     xiii

downloading IP filter information     10-29

DTE

ATM address     9-10

cable labeled     6-21, 6-40

interface card for     3-38, 3-39

dte_cir (command-line option)     9-4

DTE-to-DCE frames     A-5

dual homing configuration     6-28, 6-29

Dual Interface Ethernet SwitchProbe Device     3-14  to 3-15, 6-3

dump     8-9

dvadmin utility (TrafficDirector)     9-5

dvinst.cfg file     10-20

E

earth ground. See ground

EIA     2-1

EIA/TIA-232 connection to SwitchProbe device     2-1

EIA/TIA-449 cable     6-30

EIA/TIA-449 tap cable pinout (figure)     C-3

EIA/TIA-530 tap cable pinout (figure)     C-4

EIA-530 cable     6-30

Eight-Port Ethernet SwitchProbe Device     3-29

configuring     3-29

front panel (figure)     3-30

interfaces     3-31

Network Interface Cards     3-29

Eight-Port Fast EtherChannel SwitchProbe Device

interfaces (table)     3-46

electric shock, avoiding     6-19

Electronics Industries Association. See EIA     2-1

enable_all_hosts (command-line option)     8-15

enable_all_matrix (command-line option)     8-15

enable_host (command-line option)     8-8

enable_matrix (command-line option)     8-8

enable_stats (command-line option)     8-8

encapsulation protocol     6-35

enhanced RMON     1-11, 11-2

EPROM     3-10

error (red) LED     5-10

Ethernet and FDDI MIB comparison (table)     A-1

Ethernet and Token Ring SwitchProbe Device     3-17

interfaces (table)     3-18

rear panel (figure)     3-17

Ethernet and WAN MIB comparison (table)     A-4

Ethernet AUI pin designations (table)     C-1

Ethernet connection type, changing     6-4

Ethernet interface

factory-installed configuration     6-3

out-of-band management connection     6-33, 6-42

type number     8-6

Ethernet interface specifications     B-3

Ethernet ISL packet     7-13

Ethernet MIB variable     A-4

Ethernet RMON MIB     A-5

Ethernet Statistics group     A-5

Ethernet SwitchProbe Device     1-3, 3-12

Dual Interface     3-14

Single Interface     3-12  to 3-13

etherStats objects     A-5

eventlog (command-line option)     8-9

events group, RMON1     1-9

exit Remote Login application     5-7

expert data reduction     10-29

F

Fast EtherChannel

software option     3-46, 11-4

specifications     B-3

SwitchProbe Device     1-4, 3-44

Fast EtherChannel FX SwitchProbe Device, front panel (figure)     3-45

Fast EtherChannel software option     1-11

Fast EtherChannel TX SwitchProbe Device, front panel (figure)     3-44

Fast Ethernet     1-4, 1-11

FASTMIB feature     10-33

interface type code and number     8-6

Fast Ethernet Dual Interface Half-Duplex 100Base FX SwitchProbe Device, front panel (figure)     3-36

Fast Ethernet Dual Interface Half-Duplex 100Base TX SwitchProbe Device, front panel (figure)     3-35

Fast Ethernet Dual Interface Half-Duplex SwitchProbe Device     3-34, 3-37

Fast Ethernet FDX FX SC tap connection point, (figure)     6-23

Fast Ethernet FDX tap     6-7

front panel (figure)     6-7

Mini-Din connector     C-7

rear panel (figure)     6-7

Fast Ethernet Four-Port SwitchProbe Device, converting to Fast EtherChannel Device     3-46

Fast Ethernet Full-Duplex 100Base FX Interface     6-10

Fast Ethernet Full-Duplex 100Base FX SwitchProbe Device, front panel (figure)     3-39

Fast Ethernet Full-Duplex 100Base TX SwitchProbe Device, front panel (figure)     3-38

Fast Ethernet Full-Duplex 100Base TX tap connection, (figure)     6-9

Fast Ethernet Full-Duplex SwitchProbe Device     3-37, 3-40

Fast Ethernet Full-Duplex Tap SwitchProbe specifications     B-2

Fast Ethernet FX interface LEDs     6-27

Fast Ethernet Half-Duplex 100Base FX SwitchProbe Device, front panel (figure)     3-33

Fast Ethernet Half-Duplex 100Base TX SwitchProbe Device, front panel (figure)     3-32

Fast Ethernet Half-Duplex SwitchProbe Device

interfaces (table)     3-34

Fast Ethernet Half-Duplex TX SwitchProbe Device     3-31

Fast Ethernet interfaces     7-13, 7-14

Fast Ethernet LED status     6-18

Fast Ethernet MIC switch connection to fiber-optic splitter tap, (figure)     6-17, 6-26

Fast Ethernet optical bypass switch connectors (table)     C-7

Fast Ethernet ST switch connection to fiber-optic splitter tap, (figure)     6-15, 6-25

Fast Ethernet SwitchProbe Device     3-31

Fast Ethernet TX Interface LEDs, (figure)     6-27

FASTMIB feature     10-33

fault tolerance via Token Ring     6-29

FDDI     1-4, 1-11

FASTMIB feature     10-33

interface specifications     B-3

interface, connecting to Token Ring     6-28

MIB variable name     A-2

networks with LAN traffic     1-4

Ring Monitor application     A-2

traffic, monitoring     A-1

FDDI DAS Ethernet SwitchProbe Device     1-4, 3-47

FDDI DAS LEDs     6-29

FDDI Dual Attachment Station SwitchProbe Device     3-46

FDDI Ethernet SwitchProbe Device

interfaces     3-48

fiber cable     6-21

fiber-optic SC connector     3-32, 3-33

fiber-optic splitter     4-5

(figure)     6-37

connecting to ATM SwitchProbe Device     6-40

rack panel     4-6  to 4-8

tap     6-10

connecting to 100Base FX interface     6-11

connecting to full-duplex FX ports     6-21

connecting to network segment     6-12, 6-22

filename (command-line option)     10-29

filters group, RMON1     1-9

firmware, agent     3-10

FLASH memory     3-10

upgrading HSSI firmware     7-25

upgrading Token Ring/FDDI firmware     7-25

Four-Port Ethernet SwitchProbe Device     3-28

configuring     3-28

front panel (figure)     3-28

interfaces     3-29

Four-Port Fast Ethernet FX SwitchProbe Device

front panel (figure)     3-42

Four-Port Fast Ethernet SwitchProbe Device

interfaces     3-43

Four-Port Fast Ethernet TX SwitchProbe Device

front panel (figure)     3-41

Four-Port Multiport Fast Ethernet SwitchProbe Device     11-4

Four-Port Multiport T1/E1 SwitchProbe Device

WAN interfaces     3-53

Four-Port T1/E1 WAN SwitchProbe Device     3-52

Frame Relay DLCI

analyzing     1-11

automatically discovering     9-2

manually specifying     9-2

Frame Relay monitoring, setting interface options     7-12, 7-14

Front-Access Chassis Series     1-3

descriptive summary     1-6, 3-3  to 3-4, 3-20

device specifications     B-2

Fast Ethernet SwitchProbes and NetFlow packets     11-7

front panel     3-21  to 3-26

mounting in equipment rack     4-3

power switch     3-27

rear panel (figure)     3-26

Front-Access Chassis SwitchProbe Device Specifications     B-2

full duplex mode     3-42

Full-Duplex 100Base FX port, connecting to two switches     6-20

Full-Duplex 100Base TX port, connecting to two switches     6-19

fuse requirements, SwitchProbe Device     2-1

FX connector     3-32, 3-34, 3-38

G

gateway address, changing or assigning     5-13

get command     8-4, 10-22

get eventlog (command-line option)     10-12

get modem (command-line option)     10-10

get requests for MIB variables     11-1

green LED     3-6, 6-4, 6-29

See also LEDs

ground     4-8, 6-2

groups, Ethernet and Token Ring     1-8

gw_addr     8-9

H

half duplex mode     3-42

Half-Duplex Fast Ethernet interface speed     5-19

hangup_string (modem control string)     10-11

Hayes-compatible modems     10-9, 10-13

help access_list (command-line option)     10-21

help command     8-5

help modem (command-line option)     10-9

help proute (command-line option)     10-26

help route (command-line option)     10-24

High-Capacity RMON (HCRMON)     1-7

high-speed interswitch trunks, monitoring     11-3

history group, RMON1     1-9

host top n group, RMON1     1-9

host_aging_frequency (command-line option)     8-8, 8-14

host_table_size (command-line option)     8-8

hosts group, RMON1     1-9

HSSI specifications     B-3

HSSI SwitchProbe Device     1-5, 3-48, 3-49

HSSI tap     6-34

HSSI tap connection point, (figure)     6-36

humidity. See SwitchProbe Device specifications

I

IETF     1-8

implementing

ATM shadow MIB     A-5

WAN Shadow MIB     A-4

init_string (modem control string)     10-11

installation warnings     4-1

installing

SwitchProbe     4-2

WAN tap, (figure)     6-32

interface (command line option)     8-9

interface modes     3-11, 3-25

interface numbers     3-12, 3-26

Interface Options Menu     7-12

interface specifications     B-3

interface speed

Half-Duplex Fast Ethernet     5-19

Token Ring and WAN interface     5-15

interfaces

See also NICs; Ethernet interface; WAN interfaces

ATM SwitchProbe Device     8-7

Ethernet and Token Ring SwitchProbe Device     3-18

Ethernet SwitchProbe Device     6-3

Fast Ethernet     7-14

Fast Ethernet Dual Interface Half-Duplex SwitchProbe Device     3-36, 3-37

Fast Ethernet Full-Duplex 100Base FX SwitchProbe Device     6-10

Fast Ethernet Full-Duplex SwitchProbe Device     3-40

Fast Ethernet Half-Duplex SwitchProbe Device     3-34

Fast Ethernet SwitchProbe Device     7-13, 8-6

FDDI Ethernet SwitchProbe Device     3-48

FDDI SwitchProbe Device     6-28, B-3

Four-Port Ethernet SwitchProbe Device     3-29

Four-Port Fast Ethernet SwitchProbe Device     3-43

Multiport Fast Ethernet and Fast EtherChannel SwitchProbe Device     6-27

special, for NetFlow Monitor     11-3

Two-Port T1/E1 SwitchProbe Device     3-52

virtual     9-1, 9-7, 11-3

WAN and Ethernet/Token Ring SwitchProbe Device     3-20

Interlock LED     6-34

Internet Engineering Task Force. See IETF

invalidating IP address     5-7  to 5-8

IP address     1-12

changing or assigning     5-13

invalidating     5-7  to 5-8

secondary on primary interface     10-27

IP filters, creating     10-29

IP packet streams, redirecting     11-2

ip_addr (command-line option)     8-9

ip_valid (command-line option)     8-9

IP-DATAFILTER     10-31

J

jumper to set Ethernet connection, internal     6-4

K

keyboard port     3-8

L

LAN links and Small Chassis Series     1-3

Large Chassis Series

See Front-Access Chassis Series     1-3

laser products, class 1     6-2

laser radiation     6-2

LEDs

amber, blinking     6-29

amber, solid     6-30

ATM interface     6-36

Ethernet interface     6-4

Fast Ethernet     6-18

Fast Ethernet FDX tap, front panel     6-7

Fast Ethernet FDX tap, rear panel     6-8

FDDI DAS     6-29

Front-Access Chassis Series     3-21

green, blinking     6-29

green, solid     6-29

iIlegal topology     6-29

Interlock     6-34

link signal     6-18

Multiport Fast Ethernet and Fast EtherChannel Interface     6-27

network traffic     6-18

no cable attached     6-18

no link signal detected     6-18

Power (WAN tap unit)     6-32

self-test failure     6-30

Small Chassis Series     3-5  to 3-6

stay on     5-10

lh_buckets (command-line option)     8-12

lh_interval (command-line option)     8-12

license information     11-6

line voltages     6-4

link signal     6-18

locally administered address, Token Ring     10-34

logging modem events     8-6

login types     1-13

M

MAC address

local     10-35

Token Ring     8-10

MAC header missing     A-4

mac_add     8-10

mac-layer statistics     8-12

Manage + Monitor mode     3-11, 3-13

Manage mode     3-8, 3-11

manage_mode (command-line option)     8-10

management interface     5-5, 5-19

manual configuration     5-8

manual reset button

Front-Access Chassis Series     3-22

Small Chassis Series     3-6

manually specifying Frame Relay DLCIs     9-2

masks, guidelines for specifying     10-21

matching network speed     5-15

matrix_aging_frequency (command-line option)     8-8, 8-14

matrix_table_size (command-line option)     8-8

max_captsize (command-line option)     8-10

max_controlentry (command-line option)     8-10

max_etherpktsize (command-line option)     8-10

max_host (command-line option)     8-10, 8-12

max_log (command-line option)     8-10

max_matrix (command-line option)     8-10, 8-12

maximum boundary of application response time     11-10

memory (spec). See SwitchProbe Device specifications

MIB

private     1-9

variable name     A-3

MIC (switch) to SC (Tap)     6-12

MIC connectors for 100Base FX network     6-16, 6-25

min_pktsize     8-10

Mini-Din connector, pin connections     C-7

minimum boundary of application response time     11-10

mini-RMON     1-2, 1-8, 10-35

mini-routing feature     10-27

mirroring     10-35

Mixed mode     3-43

modem

control strings     10-10

end of string character     10-14

event log     10-12

events     8-6

hangup string     10-14

initialization string     10-14

secondary phone number     10-16

modem (command-line option)     8-11

Modem Configuration Tutorial     10-13

modem_log (command-line option)     8-6

modem_log option (command-line option)     7-17

modes, manage and monitor on same interface     6-34

Monitor mode     3-11, 3-51, 3-53

monitor_mode (command-line option)     8-11

monitor port     10-35

monitoring

critical links     11-3

DLCI and VPI/VCI     9-1

high-speed interswitch trunks     11-3

NetFlow, with special interface 50     11-3

network resources     1-11

network with fiber-optic splitter     4-5

router backbone     1-11

traffic for DLCIs     3-50

traffic, FDDI, WAN and ATM     A-1

VLANs     1-11

monitoring modes (Multiport Fast Ethernet SwitchProbe)

Full Duplex Mode     3-42

Half Duplex Mode     3-42

Mixed Mode     3-43

most significant bit (MSB)     A-5

mounting brackets     4-3

mounting in equipment rack     4-4

mtu_size     8-11

Multiport Ethernet SwitchProbe Device     1-4, 3-27

Multiport Fast Ethernet and Fast EtherChannel interfaces     6-18

Multiport Fast Ethernet FDX TX tap connection, (figure)     6-20

Multiport Fast Ethernet SwichProbe Device connected to two fiber-optic splitter taps, (figure)     6-22

Multiport Fast Ethernet SwitchProbe Device     3-40

Multiport T1/E1 WAN SwitchProbe Device     1-5, 3-50, 6-32, 6-34

N

net mask     5-13, 5-14

net_mask (command-line option)     8-11

NetFlow Monitor     1-7, 1-11, 8-11, 11-2

parameters     11-6

special interface 50     11-3

UDP port     11-3

NetFlow packets via eight virtual interfaces, receiving     11-8

netflow_ifn (command-line option)     8-11, 11-8

netflow_port (command-line option)     8-11

netflow_speed (command-line option)     8-11, 11-8

network

(amber) LED     5-10

connecting SwitchProbe Device to     6-1

encapsulation protocol     5-6

segment, inaccessible     10-27

speed     5-5, 5-15, 6-33

statistics     6-33

Network Interface Cards. See NICs

network layer     1-10

NICs

ATM SwitchProbe Device     3-55

Dual Interface Ethernet SwitchProbe Device     3-14

Eight-Port Ethernet SwitchProbe Device     3-29

Ethernet and Token Ring SwitchProbe Device     3-17

Fast Ethernet Dual Interface Half-Duplex SwitchProbe Device     3-36

Fast Ethernet Full-Duplex SwitchProbe Device     3-38, 3-39

Fast Ethernet Half-Duplex SwitchProbe Device     3-33

Four-Port Ethernet SwitchProbe Device     3-28

Four-Port T1/E1 WAN SwitchProbe Device     3-52

Front-Access Chassis Series     3-22

HSSI SwitchProbe Device     3-49

monitoring attached segment traffic     3-51

Single Interface Ethernet SwitchProbe Device     3-13

Single Interface Token Ring SwitchProbe Device     3-16

Small Chassis Series     3-8, 3-11

Two-Port T1/E1 WAN SwitchProbe Device     3-51

WAN and Ethernet/Token Ring SwitchProbe Device     3-19

nl_hosts (command-line option)     8-13

nl_matrix (command-line option)     8-13

noconnect_string (modem control string)     10-11, 10-15

null-modem crossover cable     C-9

NVRAM and private routes     10-25

O

OC-3 multimode fiber cable     6-36

operating temperature. See SwitchProbe Device specifications

optical bypass switch     6-28

out-of-band management connection     6-33

P

packet capture group, RMON1     1-9

packet size     8-10

packet_capture (command-line option)     8-6

password

changing or creating     10-17

enabling software options     11-1

protection     1-13

to enable software option     11-5

PB6. See Small Chassis Series

PB8. See Front-Access Chassis Series

PCC     3-8, 3-22

Peripheral Controller Card. See PCC

Permanent Virtual Circuit (PVC) monitoring     9-1

phone_number1/2 (modem control string)     10-11

phys_interface (command-line option)     9-3, 9-4

physical interface     9-7

physical layer statistics     A-5

ping     8-4, 8-11, 11-1

ports, configuring for monitoring modes (Multiport Fast Ethernet SwitchProbe Device)     3-42

power

consumption. See SwitchProbe Device specifications

cord     6-4

input. See SwitchProbe Device specifications

requirements, SwitchProbe device     2-1

sockets     3-8, 3-27, 4-8

source, connecting to     4-8

supply and voltage     6-4

switch     3-6

and configuration parameters     5-6

Front-Access Chassis Series     3-27

Small Chassis Series     3-6, 3-7

Power LED (WAN tap unit)     6-32

Power Out socket     4-8

power up sequence and console message     5-10, 5-11

private routes     10-25  to 10-27

Probe, interface labeled     6-11

probeConfig group, RMON2     1-10

protocol decode displays     A-5

protocol decode summary mode     A-5

ProtocolDir group, RMON2     1-10

ProtocolDist group, RMON2     1-10

proute     8-11

proxy RMON agent     10-35

proxyapport     8-11

pseudo-route function     10-28

PVC

discovery, automated     9-1

specifying ATM     9-9

pvc_discovery     9-4

Q

quit (command)     8-5

quit command-line mode     5-7

R

Read Community

field     7-2

name     7-1

read_community (command-line option)     8-12

real_iftype (command-line option)     7-18, 8-6

rebooting

See also reinitializing SwitchProbe Device; resetting

manual reset button for     3-6, 3-22

receiving NetFlow packets via eight virtual interfaces     11-8  to 11-9

red LED     3-6, 5-10

See also LEDs

reinitializing SwitchProbe Device     5-6

Remote Login feature and changes to access levels     10-22

Remote Login screen     8-1

Remote Monitoring

See RMON; RMON1/RMON2

Remote port     3-8, 3-22

requested target token rotation time parameter     8-16

resetting     3-7, 8-12

See also rebooting; reinitializing SwitchProbe Device

Agent Configuration Utility     5-8

application response time counters     11-11

SwichProbe Device agent     7-5

Resource Monitor     1-11

response time     8-6

RFC 1055     10-2

RFC 1513     A-2

RFC 1757     A-1, A-4

ring speed, default     5-7, 5-15

Ring Station Group     A-2, A-3

ringid (command-line option)     8-12

RJ-12 Optical Bypass Switch Connectors     C-6

RJ-12 station connector     6-28

RJ-45 connectors     3-32, 3-33, 6-19

RJ-45 port     6-6

RMON     1-1, 1-11

analysis through roving     10-35

configuring DLCI     9-5

for FDDI, WAN, and ATM     A-1

statistics     1-8

RMON1/RMON2

groups     1-8  to 1-10

parameters     9-7

parameters, configuring default     7-22

parameters, configuring DLCI for     9-5

parameters, configuring in SwitchProbe Device     7-19  to 7-21

parameters, view or establish     8-12  to 8-16

rmon1_options     8-12  to 8-13

RMON2 agent, using default groups to enable     1-12

rmon2_options     8-13  to 8-16

RMON-MIB, as standard     1-7

round-trip delay, measuring     11-2

route (command-line option)     8-15

router

backbone     11-2

discovery     1-12

using with NetFlow Monitor     11-3

router_discovery (command-line option)     8-6

router_discovery option (command-line option)     7-17

router_enable (command-line option)     7-17, 8-6

router_ifn (command-line option)     11-8

router_ip_address (command-line option)     11-8

routing options     1-12

roving     10-35, 10-36

RS-232

null modem crossover cable     5-9

pin designations     C-8

and RS-449 connection to SwitchProbe device     2-1

S

safety compliance for SwitchProbe Devices     B-1

safety extra-low voltage circuits (SELV)     6-19

safety warnings, translated     D-1

saving configuration parameters     5-6

SC (switch) to SC (tap)     6-12

SC connectors to 100Base FX Network     6-13

SC duplex to dual SC duplex multimode fiber cable, (figure)     6-38

SC modular port     6-6

SC to ST cable     6-14

SC-duplex-to-dual-SC-duplex multimode fiber cable     6-11, 6-21, 6-38

SC-duplex-to-SC-duplex multimode fiber cable, (figure)     6-38

SCSI II connectors     6-34

SC-to-MIC cable     6-16

SC-to-SC 62.5/125 micron multimode fiber optic cable     6-6

SC-to-SC cable     6-13

secondary_ip_addr     8-15

security, Switch Probe agent     1-12

self-test failure     6-30

serial interface, setting speed of     10-7

Serial Line Internet Protocol     3-8

See SLIP

Serial Line Internet Protocol (SLIP) port     3-8

for out-of-band communication     10-1, 10-2

serial ports specifications     B-3

server     8-15

set access_list (command-line option)     10-23

set agent_options (command-line option)     10-12

set atm_maxvpibits (command-line option)     9-8

set command     8-4, 10-22, 10-26, 10-27

set mac_addr (command-line option)     10-34

set netflow_ifn add (command-line option)     11-8

set netflow_port (command-line option)     11-7

set netflow_speed (command-line option)     11-7

setting

IP-DATAFILTER     10-31

options for Fast Ethernet interface     7-14

RMON1/RMON2 parameters     9-7

speed of serial interface     10-7

sh_buckets (command-line option)     8-12

sh_interval (command-line option)     8-12

shadow MIB implementations     A-1

shipping damage     3-1

side-band management connection

ATM     6-42

Multiport T1/E1 WAN     6-34

Simple Network Management Protocol. See SNMP

Single Interface Ethernet SwitchProbe Device     3-13

Single Interface Token Ring SwitchProbe Device     3-15

site requirements for SwitchProbe device     2-1

SLIP     10-2

interface     10-2, 10-3

mini-routing feature     10-27

port     3-8, 3-26

for out-of-band communication     6-42

forwarding trap packets     10-2

routing IP packets     10-2

SNMP communication over serial link     10-2

routing, configuring     10-28

SLIP Configuration Tutorial     10-3

slip_ip (command-line option)     7-17, 8-6

Small Chassis Series     1-3

description and device types     1-6, 3-3

device specifications     B-1

Ethernet SwitchProbes and NetFlow packets     11-7

front panel     3-5  to 3-7

manual reset button     3-6

Network Interface Card (NIC)     3-8

Peripheral Controller Card (PCC)     3-8

power switch     3-6, 3-7

rear panel (figure)     3-7

Remote port     3-8

reset button     3-7

system diagnostics     3-6

Small Chassis SwitchProbe specifications     B-1

SNMP

as security mechanism     1-12

SNMP polling and trap management     11-2

software compatibility and recommendations, TrafficDirector     1-6

software_options (command-line option)     8-15

SPAN, and SwitchProbe device     1-2

special parameter configuration for software options     11-5

specifications for Fast Ethernet Full-Duplex Tap SwitchProbe Device     B-2

specifications for Front-Access Chassis Series     B-2

specifications for Small Chassis Series     B-1

speed (command-line option)     8-15

ST (switch) to SC (tap)     6-12

ST connectors     6-14, 6-24

standards compliance for SwitchProbe Devices     B-1

start_art (command-line option)     8-7

start_history (command-line option)     8-13

start_stats (command-line option)     8-13

static routes     10-24  to 10-25

statistics

application layer, RMON2     1-10

ATM mapped to Ethernet RMON (table)     A-5

DLCI interface     8-13

long-term history (command-line option)     8-12

mac-layer     8-12

network layer, RMON2     1-10

physical layer     A-5

response time     1-11, 8-7

RMON1 group     1-9

RMON2 group     1-11

short-term history (command-line option)     8-12

using SLIP to access network     6-33

storage temperature. See SwitchProbe Device specifications

ST-to-MIC coupler     6-16

ST-to-ST coupler     6-14

subnet mask, changing     10-6

Switched Port Analyzer. See SPAN

SwitchProbe Device

accessories     3-2

agent settings     7-5

automatic configuration of     5-4

configuring RMON1/RMON2 parameters     7-19  to 7-21

connecting to network     6-1

damage through cabling     6-28

date, setting     8-9

fault tolerance via Token Ring     6-29

interface modes     3-25

interface specifications     B-3

models     3-1

Front-Access Chassis Series     3-3  to 3-4

Small Chassis Series     3-3

power requirements     2-1

power up sequence     5-10

saving configuration parameters     5-6

shared modem, using as     11-2

shipping and damage     3-1, 3-2

site requirements     2-1

specifications     B-1  to B-3

standards compliance     B-1

unpacking     3-1

syntax, command-line     8-3

system diagnostics     3-6

T

Telecommunications Industry Association. See TIA     2-1

telecommunications lines, disconnecting     6-30

telephone-network voltage (TNV) circuits     6-19

temperature, operating and storage. See SwitchProbe Device specifications

tftp (command-line option)     8-15

tftp_timeout (command-line option)     8-15

Thicknet     6-3

Thinnet     6-3

third-party software     1-11

TIA     2-1

timeout time limit     11-11

Toggle data capture     10-18

Token Ring

or FDDI, upgrading FLASH memory     7-25

group, RMON1     1-9

interface     6-28, 6-33

interface specifications     B-3

locally administered address     10-34

MAC address     8-10

MIB variable name     A-2

RMON MIB (RFC 1513) groups     A-2

Station group     A-2

Station Order group     A-2

SwitchProbe Device     1-3, 3-15

entering interface speed     5-18

Single Interface, rear panel (figure)     3-16

UTP pin designations (table)     C-6

topology LED, illegal     6-29

traffic matrix group, RMON1     1-9

traffic monitoring for DLCIs     3-50

traffic, network

converting WAN to Ethernet     A-4

LED     6-18

and mini-RMON     1-2

monitoring for DLCIs     3-50

TrafficDirector application     1-11

dvadmin utility     9-5, 10-32

dvftp utility     10-29

interface type number     8-6

Protocol Decode feature     10-18

Remote Login     5-13

Resource Monitor     11-1

and vital signs     1-8

transmit activity     6-27

trap aggregation and filtering     11-2

trap ports, specifying     10-32

trap routing     1-12

trap_port (command-line option)     8-16

traps, DLCI     9-5

treq (command-line option)     8-16

turning on or off (Small Chassis Series)     3-6

Two-Port T1/E1 SwitchProbe Device

interfaces (table)     3-52

Two-Port T1/E1 WAN SwitchProbe Device

front panel (figure)     3-51

TX connector     3-32, 3-34, 3-38

Type 1 foil twisted-pair (FTP) cable     6-28

Type 2 unshielded twisted-pair (UTP) cable     6-28

U

UDP port, used with NetFlow Monitor     11-3

UNI signaling Switched Virtual Circuit (SVC) environment     8-7

unpacking and inspecting shipping cartons     3-1  to ??

Unshielded Twisted Pair (UTP) cable     6-3

User Datagram Protocol (UDP)     11-2

usrHistory group, RMON2     1-10

V

V.35 cable     6-30

V.35 tap cable pinout (figure)     C-3

Virtual Channel Identifier (VCI)     8-7

virtual interfaces     9-1, 9-7, 11-3, 11-8

virtual LAN. See VLAN

Virtual Path Indicator (VPI)     8-7

VLAN

encapsulations     8-10

ID number     7-13

Inter-Switch Link (ISL)     1-7

mode     7-13

monitoring     1-11, 11-3

VLAN Monitor     1-11, 11-3

VPI size, specifying     9-8

VPI/VCI monitoring, ATM SwitchProbe Device     9-7

W

WAN

connection pinouts     C-2

Frame Relay     7-12

header and trailer     A-4

interfaces

deleting DLCIs     9-4

Four-Port Multiport T1/E1 SwitchProbe Device     3-53

operating mode     6-30

specifications     B-3

speed     5-18, 6-35

Two-Port T1/E1 SwitchProbe Device     3-51

link speed     8-6

links and Small Chassis Series     1-3

MIB variable     A-4

network speed     5-5

shadow MIB, implementing     A-4

tap kit     6-31

traffic, monitoring     A-1

WAN and Ethernet SwitchProbe Device

rear panel (figure)     3-19

WAN and Ethernet/Token Ring SwitchProbe Device     3-18, 3-20

WAN SwitchProbe Device, DLCI monitoring for     9-1

warnings

connecting to network     6-2, 6-30  to 6-31

installation     4-1

translated safety     D-1

Web

documentation on     xiii

weight. See SwitchProbe Device specifications

Write Community Name     7-3

write_community (command-line option)     8-16

X

X.21 cable     6-30

X.21 tap (one-clock) cable pinout (figure)     C-4

X.21 tap (two-clock) cable pinout (figure)     C-5

Y

yellow LED. See amber LED

Posted: Wed Oct 2 08:24:26 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.