|
Table B-1 and Table B-2 show the complete specifications for the small and front-access chassis SwitchProbe devices.
Standards compliance for all SwitchProbe devices are as follows:
Item | Specification |
---|---|
Power consumption | 80W max |
Power input | 115/220 - 240 VAC, 2/IA, 50-60 Hz |
Operating temperature | 32 to 122ºF (0 to 50ºC) |
Storage temperature | -104 to 140ºF (-40 to +60ºC) |
Humidity | 5 to 95% relative humidity (noncondensing) |
Dimensions (H x W x D) | 3 x 12 x 13.5 in. (7.5 x 30 x 33.75 cm) |
Weight | 11 lbs. (4.95 kg) |
Memory | 2-, 4-, 8-, or 16-MB (single interface) |
Display | 3 LEDs standard |
Item | Specification |
---|---|
250W max. | |
100-115/220 - 240 VAC, 7/4 A, 50-60 Hz (autoswitching) | |
32 to 122ºF (0 to 40ºC) | |
-104 to 140ºF (-40 to +60ºC) | |
5 to 95% relative humidity (noncondensing) | |
6.75 x 17 x 16 in. (16.86 x 42.5 x 40 cm) | |
24 lbs. (10.8 kg) | |
8-, 16-, 32-, 128-MB, 8-MB Fast Ethernet, 16-MB FDDI | |
3 LEDs standard |
Table B-3 shows the complete specifications for the Fast Ethernet full-duplex tap.
Item | Specification |
---|---|
Power consumption | 6W max. at 5 VDC |
Power supply | Universal input, desktop switching power supply. 110/240 VAC @ 50/60 Hz |
Operating temperature | 32 to 122ºF (0 to 50ºC) |
Storage temperature | -77 to 158ºF (-25 to 70ºC) |
Humidity | 5 to 95% relative humidity (noncondensing) |
Dimensions (H x W x D) | 1.75 x 6 x 4 in. (4.38 x 15 x 10 cm) |
Weight | 3 lbs. (1.35 kg) including power supply |
Display | 6 LEDs standard |
Table B-4 shows the complete specifications for the SwitchProbe interface.
Item | Specification |
---|---|
One console port (RS-232-C Type) | |
15-pin D-type 10Base5 (Thicknet), BNC 10Base2 (Thinnet), | |
9-pin D-type (Type 1), RJ-45 (Type 2) | |
26-pin D-type supports connections to V.35, X.21, RS-449, EIA-530 | |
Dual (DAS) SC-type connectors for SC-to-SC or SC-to-MIC 62.5/125-micron multimode, fiber-optic cable | |
RJ-45 for Category 5 UTP or Category 5 sheath-shielded TP | |
SC-type connector for SC-to-SC, ST - SC or SC-to-MIC 62.5/125-micron fiber-optic cable | |
RJ-45 for TX model; SC fiber-optic cable for FX model | |
26-pin D-type SCSI II connectors externally clocked up to T3/E3 speed | |
Posted: Wed Oct 2 08:35:48 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.