Table of Contents
index
- .ini files (Cisco UGM) 4
- accounting 1
- accounting records 5
- Adding gatekeepers in CVM
- local zone 5
- remote zone 6
- administration 13
- administrators
- unable to change (Cisco RPMS) 15
- Adobe Acrobat
- Reader xxxv
- using xxxv
- alarms 15
- CIC 9
- Cisco MGC, retrieving all 5
- Cisco MGC, using troubleshooting procedures 7
- Cisco MNM 19, 21
- configuring and verifying 7
- alerts
- CIC 9
- AMA BAF 3
- archive extraction error (Cisco RPMS) 3, 4
- aregcmd command 2, 6, 12, 15
- aregcmd command (Cisco AR) 6
- aregcmd commands 16
- arservagt command 11
- arstatus command (Cisco AR) 11
- asynchronous shell connections
- testing 6
- atdt (at) command 6
- attributes (Cisco AR) 5
- autodiscovery (Cisco UGM) 3
- BAMS 7
- baseline
- network performance 15
- bearer channel troubleshooting
- resolving stuck CICs 24
- billing 1
- billing logic 3
- bouncing SS7 links (correcting) 11
- busyout command 8
- CAC 6
- configuring thresholds 4
- call completions 5
- call performance 5
- call trace
- alternatives 31
- performing 30
- Call Tracker 8
- calltracker enable command 9
- CAR 7
- cautions xxxvi
- CDRs 2
- not being generated 39
- CEMF 2, 1
- CIC 7
- starting and stopping components manually 4
- CICs
- querying 18
- resetting 23
- resolving stuck 24
- state mismatch, resolving 19
- unblocking 22
- validating 20
- CIC View Builder 16
- Cisco.com xxxviii
- Cisco 2611 Signaling Link Terminal 15
- Cisco AR 1, 5
- checking server 11
- Cisco ASAP Solution
- References 2
- Cisco BAMS 3
- CISCO-CALL-APPLICATION-MIB 11
- Cisco CallTracker 8
- CISCO-CAS-IF-MIB 11
- Cisco Catalyst switches 15
- CISCO-DIAL-CONTROL-MIB 11
- Cisco Feature Navigator 11
- Cisco Generic Dial Plan Manager 16
- Cisco Info Center
- server 5
- Cisco Info Server 2
- creating new 8
- managing 10
- starting and stopping 5
- Cisco IOS Debug Command Reference 13
- Cisco MCG 3
- CISCO-MEMORY-POOL-MIB
- using to monitor memory 4
- Cisco MGC
- calls fail 28
- call trace, alternatives 31
- CICs, resolving stuck 24
- disk space, clearing 33
- hosts, recovering from failure 35
- platform troubleshooting procedures 3
- switchover, recoverying from failure 34
- Cisco MGC (SC) node
- manual deployment 7
- using seed file to deploy 6
- Cisco MNM 7, 1
- diagnostic tools 24
- event messages 26
- viewing information about network devices 22
- CISCO-MODEM-MGMT-MIB 11
- Cisco PGW 2200 3, 4
- CISCO-POP-MGMT-MIB 11
- Cisco PSTN Gateway Solution
- References 3
- Cisco RPMS 15, 5
- Cisco RPMS reports 5
- Cisco SC2200
- monitoring disk space 3
- monitoring peak call rates 3
- testing failover 4
- Cisco SC2200 node 15, 3
- Cisco SC2200 Signaling Controller 1
- CISCO-SIP-UA-MIB 11
- Cisco SS7 Interconnect for Voice Gateways Solution
- References 2
- Cisco UGM 7, 1
- autodiscovery 3
- deployment 3
- network objects 3
- CiscoView 16
- CISCO-VOICE-DIAL-CONTROL-MIB 11
- CISCO-VOICE-IF-MIB 11
- CISCO-VOICE-NUMBER-EXPANSION-MIB 11
- Cisco VSPT 1
- provisioning Cisco BAMS 4
- clear spe command 8
- Clients object (Cisco AR) 4
- clocking
- configuring and verifying 6
- configuration and image management (Cisco UGM) 6
- Configuration Manager (CIC) 6
- Configure Administrative State function (Cisco UGM) 9
- configuring devices with Cisco UGM 6
- connection rates and speeds 6
- controller logging (Cisco UGM) 3
- controllers 6
- verifying 5
- COT 6
- manual test 25
- settings, verifying 26
- CPU load and memory use 5, 6
- CPU utilization 3
- creating universal gateway groups in CVM 3
- CVM 7, 1
- daemons (on Cisco SC2200 host) 5
- data
- inventory 4
- database connectivity failure (Cisco RPMS) 7
- database initialization failure (Cisco RPMS) 5
- database server not running (Cisco RPMS) 17
- data export 4
- debug aaa authorization command 30
- debug commands 13
- debugging (Cisco RPMS) 24, 27
- debug resource-pool command 30
- debug tacacs command 30
- diagnostic tools
- Cisco MNM 24
- DIAL-CONTROL-MIB 11
- dial plan
- local 11
- local (POTS) 11
- network (VoIP) 12
- discovery 13
- Cisco MNM 9
- discovery and deployment (Cisco UGM) 5
- documentation
- conventions xxxv
- meaning of cautions xxxvi
- meaning of notes xxxvi
- meaning of timesavers xxxvi
- meaning of tips xxxvi
- release of xxx
- error messages 13
- events 15
- CEMF, Cisco MNM, UGM 1
- CIC 9
- Cisco MNM 17, 19, 21
- messages in Cisco MNM 26
- export 13
- export (data) 4
- exporting inventory data 4
- facility-alarm command 7
- failover
- Cisco SC2200 4
- fault management (Cisco UGM) 7
- faults, alarms, and traps
- managing 10
- Filter Builder (CIC) 15
- filters (CIC) 14, 15
- firmware location command option 8
- firmware upgrade command option 8
- FXO 13
- gatekeepers
- adding in CVM 4
- creating local clusters 9
- endpoints 10
- load balancing 9
- managing 11
- managing with IOS 9
- remote clusters 9
- verifying configuration 10
- gateways
- using CallTracker to manage 8
- general operations and maintenance guidelines (table) 5
- GR-1100 3
- GR-508 3
- groups (Cisco AR) 7
- GUI display problem (Cisco RPMS) 14
- H.323
- start/stop records 2
- H.323 gatekeepers 4
- high availability 1
- historyCriterial files (Cisco UGM) 4
- ifconfig -a command 5
- images
- managing 8
- using Cisco MNM to manage 10
- interfaces file (CIC) 12
- Internetworking Troubleshooting Handbook 17
- inventory 4
- IOS 7
- IOS operations (Cisco UGM) 10
- IP link
- media gateway, restoring 27
- ISDN
- D-channels, resolving discrepancies in 21
- verifyfing PRI 5
- ISDN D-channels (verifying) 6
- keys (incorrect) (Cisco RPMS) 20
- LDAP server 9
- legend (application abbreviations) 7
- load balancing 9
- local cluster 9
- local zone 5
- log files (Cisco UGM) 4
- logs
- Cisco MGC, viewing 6
- major sections of the Cisco MGC Software Release 7 and Release 9 Operations, Maintenance, and Troubleshooting Guides (table) 2
- management
- faults, alarms, and traps 10
- gatekeepers 11
- MIBs 14
- reports and data 12
- resources 9
- SS7 networks 12
- subscribers and ports 9
- management applications for Cisco solutions (table) 16
- Management Applications to Cisco Solution Components 17
- management applications to Cisco solution components (figure) 17
- Management Tools 15
- Managing Dial Plans 2
- Managing Network Elements 2
- managing Voice Ports 2
- Master Process Control Server (CIC) 7
- mcdshadow utility 17
- measurements
- not being generated 38
- opertional 4
- MGC 15
- MIB
- CISCO-CALL-APPLICATION-MIB 11
- CISCO-CAS-IF-MIB 11
- CISCO-DIAL-CONTROL-MIB 11
- CISCO-MEMORY-POOL-MIB 4
- CISCO-MODEM-MGMT-MIB 11
- CISCO-POP-MGMT-MIB 11
- CISCO-SIP-UA-MIB 11
- CISCO-VOICE-DIAL-CONTROL-MIB 11
- CISCO-VOICE-IF-MIB 11
- CISCO-VOICE-NUMBER-EXPANSION-MIB 11
- DIAL-CONTROL-MIB 11
- MIB Locator 11
- MIB objects in CISCO-MEMORY-POOL-MIB for monitoring show memory output 12
- MIB objects in OLD-CISCO-CPU-MIB for monitoring CPU utilization (table) 12
- MIBs
- managing 14
- managing objects 12
- MICA modem commands 10
- modem call completion 6
- modem recovery command series 10
- modems
- managing 10
- MTP timers
- modifying 16
- verifying 15
- nasmonitor command 18
- nco_config configuration utility 12
- nco_xigen utility 12
- figures
- Relationship of Resource and Element 17
- relationship of resource and element 17
- network management 8, 15
- network management applications for the Cisco solutions (table) 16
- network objects (in Cisco UGM) 3
- network performance
- monitoring with IOS 3
- networks
- managing 8
- NextPort SPE commands 10
- notes xxxvi
- NTP 2
- number normalization 11
- objects (CIC) 13
- OLD-CISCO-CPU-MIB
- using to monitor CPU load 3
- operational measurements 4
- Oracle database
- failure to update 25
- starting and stopping (Cisco RPMS) 10
- PDF xxxv
- performance
- Cisco MNM 13
- monitoring 8
- performance management (Cisco UGM) 8
- physical layer failures
- resolving 10
- ping failure (Cisco UGM) 9
- platform troubleshooting
- CDRs, not being generated 39
- measurements, not being generated 38
- peer, resolving failed connection to 41
- properties, rebooting to modify 40
- replication, verifying configuration 37
- stored configuration data, restoring 36
- polling 13
- Cisco MNM 11
- port counts out of synchronizaion (Cisco RPMS) 24
- ports
- managing 9, 7
- Preface
- Document Organization 2
- Process Control (CIC) 7
- Process Control Agents (CIC) 7
- Profiles object 5
- properties
- rebooting to modify 40
- ps -ef -o user,pid,pcpu -o args command 5
- radclient command 2
- radclient command (Cisco AR) 6
- RADIUS proxy 1
- RADIUS statistics 6
- redundancy 1
- References
- Cisco ASAP Solution 2
- Cisco PSTN Gateway Solution 3
- Cisco SS7 Interconnect for Voice Gateways Solution 2
- regularly scheduled operations and maintenance tasks (table) 3
- rejected requests 5
- release
- of document xxx
- of solution xxx
- remote clusters 9
- remote processes 7
- RemoteServer (Cisco AR) 9
- remote zone 6
- replication
- configuration, verifying 37
- reports
- Cisco UGM 4
- reports and data
- management 12
- resource management 14
- resources
- managing 9
- RLM
- restoring 27
- timers, modifying 29
- RPMS 7
- rtrv-alms::cont command 5
- rtrv-ctr command 5
- rtrv-ne command 5
- rtrv-ne-health::all command 5
- rtrv-softw:all command 5
- scheduling 8
- scheduling tasks
- in CVM 10
- security 12
- Cisco MNM 5
- user access (CIC) 14
- seed file 6
- server not running (Cisco RPMS) 16
- server triggers 9
- session management 10
- Session Manager (Cisco AR) 10
- show async status command 5
- show call calltracker summary command 9
- show caller command 6
- show call spike status command 5
- show call threshold command 5
- show call treatment command 5
- show controller command 5
- show controller t3 command 5
- show csm call-rate command 29
- show gatekeeper command 10
- show interface async 4/0 command 5
- show interface serial command 6
- show isdn service command 5
- show isdn status command 5
- show line command 6
- show memory command 3
- show port command 7
- show process command 5
- show processes command 3
- show resource-pool queue description command 29
- show resource-pool queue statistics command 29
- show resource-pool resource command 29
- show resource-pool resource name command 29
- show running-config command 5
- show spe command 6, 7
- show spe digital command 7
- show spe modem command 7
- show spe voice command 7
- show tacacs command 29
- show tdm clocks command 7
- show user command 6
- shutdown command 8
- SLAs 14
- SNMP 15
- spe download maintenance command 8
- SPE performance
- managing and viewing statistics 7
- spe recovery command 8
- spe recovery command series 10
- SPEs
- managing and troubleshooting 8
- upgrading firmware 8
- SS7
- deploying network 6
- SS7 dial plan
- verifying proper loading 17
- SS7 DPC
- restoring 14
- service, restoring 12
- SS7 links
- bouncing, correcting 11
- service, restoring 8
- SS7 loadsharing
- malfunction, resolving 9
- SS7 network
- configuring devices for management 4
- deployment 7
- discovery 9
- managing signaling components 1
- performance 13
- polling 11
- SS7 networks
- managing 12
- SS7 route
- restoring 13
- start/stop records 2
- start packet 5
- stop packet 5
- subscribers
- managing 9
- synchronization 8
- synchronization (GWs and GKs) 9
- synchronizing devices in CVM 8
- syslog daemon 13
- tables
- General Operations and Maintenance Guidelines 5
- Major Sections of the Cisco MGC Software Release 7 and Release 9 Operations, Maintenance, and Troubleshooting Guide 2
- Management Applications for Cisco Solutions 16
- MIB Objects in CISCO-MEMORY-POOL-MIB for Monitoring Show Memory Output 12
- MIB Objects in OLD-CISCO-CPU-MIB for Monitoring CPU Utilization 12
- Network Management Applications for the Cisco Solutions 16
- Regularly Scheduled Operations and Maintenance Tasks 3
- Tasks for Configuring Call Admission Control Thresholds 4
- Useful Cisco MIBs that Support the Cisco ASAP Solution 11
- TAC (Technical Assistance Center) xxxviii
- tasks for configuring Call Admission Control thresholds (table) 4
- TCAP trace
- Cisco MGC 32
- thresholds 15
- timeouts 5
- timesavers xxxvi
- timestamps 2
- tips xxxvi
- TLV 3
- TNS Listener 8
- starting and stopping (Cisco RPMS) 12
- traffic patterns 3
- traps
- Cisco MNM 15, 17, 19, 21
- triggers 9
- troubleshooting
- configuration and image management (Cisco UGM) 6
- Configure Administrative State function (Cisco UGM) 9
- discovery and deployment (Cisco UGM) 5
- fault management (Cisco UGM) 7
- Internetworking Troubleshooting Handbook 17
- IOS operations (Cisco UGM) 10
- performance management (Cisco UGM) 8
- ping failure (Cisco UGM) 9
- platform procedures 3
- polling (Cisco UGM) 8
- UG group 3
- universal port card and lines
- verifying 6
- upgrades
- billing components 2
- network management applications 2
- URL xxxv
- useful Cisco MIBs that support the Cisco ASAP Solution (table) 11
- UserList (Cisco AR) 8
- views 16
- vmstat command 5
- voice ports
- FXO, FXS, E&M, ISDN 13
- VSPT 7
- watchdog process not running (Cisco RPMS) 19
- Weblink Preferences xxxv
- Web server fails to start (Cisco RPMS) 9
- zone
- local 5
- logical 3
- remote 6
Posted: Wed Oct 2 12:35:12 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.