|
|
Table Of Contents
Preface
This document describes how to configure assembled Cisco 3200 Series Mobile Access Routers. For information regarding the specific hardware configuration of your router, contact your vendor.
Note
The Cisco 3200 Series Mobile Router Software Configuration Guide was completed before the finished product was shipped. Therefore, that guide might not exactly represent the Cisco 3200 Series Mobile Access Router. However, any differences are subtle and should not affect overall use of the system or the performance of certain tasks. For the latest information, refer to http:\www.cisco.com.
Document Organization
This guide is organized as follows:
Chapter 1, "Introduction," provides an overview of the Cisco 3200 Series Mobile Access Routers and tells how the router fit into the larger network.
Chapter 2, "Cisco 3200 Series Mobile Access Router Interfaces," describes how the Cisco 3200 Series router interfaces can be accessed.
Chapter 3, "Introduction to Mobile IP," provides an overview of Mobile IP, as it relates to the Cisco 3200 Series router.
Chapter 4, "Basic Home Agent and Foreign Agent Configurations," describes how to enable mobile access router services on the router, a foreign agent, and a home agent.
Chapter 5, "Wireless LAN Example Scenario," provides an example of a Cisco 3200 Series router deployed in a public safety situation.
Chapter 6, "Static and Dynamic Network Configuration," describes static and dynamic router network configuration.
Chapter 7, "Static and Dynamic Collocated Care-of Address," describes how the router is allowed to roam to foreign networks where foreign agents are not deployed.
"Foreign Agent Route Optimization," describes how the router injects mobile network routes into a foreign agent routing table, improving deployments that are running latency-sensitive applications.
Chapter 9, "Mobile IP Security," describes the registration messages and the Mobile-Home Authentication Extension (MHAE).
"Zeroization," describes how the zeroization feature erases all potentially sensitive information in the router memory.
Chapter 11, "Redundancy in a Mobile Environment," describes Mobile IP redundancy and provides example configurations.
Chapter 12, "Quality of Service for Cisco 3200 Routers," provides a description of the QoS features, such as Class Based Weighted Fair Queuing (CBWFQ), Network Based Application Recognition (NBAR), and Class Based Packet Marking.
Chapter 13, "Modems in a Mobile Environment," describes the GPRS/CDMA modems that provide the mobile access router with a layer 2 roaming interface.
Chapter 14, "FESMIC Switch Port Functionality," provides an overview of VLANs, IGMP Snooping, and Auto-negotiation.
"IEEE 802.1Q Configuration," describes how to configure IEEE 802.1Q Configuration for the Cisco 3200 Series router.
Chapter 16, "MIB Support," describes Mobile IP MIB support for the Simple Network Management Protocol (SNMP).
"Configuring SNMP," provides an example of a Cisco 3200 Series router deployed in a public safety situation.
Chapter 18, "Troubleshooting the Cisco 3200 Series Mobile Access Router," provides some information on troubleshooting a Cisco 3200 Series router
Audience and Scope
The audience for this document is the system integrator (SI) and system engineer (SE). They are experts, with networking industry training and experience. We assume that users are familiar with the terminology and concepts of the PC-104, IOS, and Mobile IP networking.
The SI or SE uses this document to configure the router to communicate with peripheral devices through the network and to troubleshoot the cards. Although they might not be specifically identified as SIs or SEs, all users of this documentation are assumed to have comparable skills and knowledge.
Related Documentation
We recommend, "Fundamentals of Wireless LANs" (ISBN 1-58713-119-6) by Cisco Press.
You can access the followin documents on the Documentation page on Cisco Connection Online (CCO) at www.cisco.com.
•
•
•
•
•
For information on configuring Mobile IP using Cisco IOS software, refer to the following documents:
•
•
For information about using Cisco IOS software to configure SNMP, refer to the following documents:
•
•
See also RFC 2006, The Definitions of Managed Objects for IP Mobility Support Using SMIv2.
Documentation Locations
These sections explain how to obtain documentation from Cisco Systems.
World Wide Web
You can access the most current Cisco documentation on the World Wide Web at this URL:
Translated documentation is available at this URL:
http://www.cisco.com/public/countries_languages.shtml
Cisco Documentation CD-ROM
Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM package. The Cisco Documentation CD-ROM is updated monthly and may be more current than printed documentation. The CD-ROM package is available as a single unit or through an annual subscription.
Ordering Documentation
You can order Cisco documentation in these ways:
•
http://www.cisco.com/cgi-bin/order/order_root.pl
•
http://www.cisco.com/go/subscription
•
Documentation Feedback
You can submit comments electronically on Cisco.com. In the Cisco Documentation home page, click the Fax or Email option in the "Leave Feedback" section at the bottom of the page. You can e-mail your comments to bug-doc@cisco.com.
You can submit your comments by mail by using the response card behind the front cover of your document or by writing to the following address:
Cisco Systems
Attn: Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883We appreciate your comments.
Documentation Conventions
This guide uses the following conventions for information and instructions.
Notes, Cautions, and Warnings
Notes, cautions, and warnings use the following conventions and symbols:
Note
Caution
Commands
Table 1 describes the syntax used with the commands in this document.
Documentation CD
The Cisco 3200 Series Router Documentation CD contains the technical publications for the Cisco 3200 Series Mobile Access Router. To view the documentation requires Acrobat Reader 4.0 or higher.
Major topics are broken into PDF files and the file names are the same as the section names. Each PDF file contains a complete set of bookmarks, so you can jump to any topic in any file by double-clicking a bookmark.
After the CD is inserted in the CD ROM drive and recognized by your PC, do the following:
Step 1
Step 2
Step 3
A single file named EntireBook.PDF contains the entire book, as opposed to the file being broken into sections, primarily for the purpose of printing the entire book.
System Requirements
Printing Documents
The documentation is organized into sections.
To print a document section:
Step 1
The Windows Print Dialog box appears.
Step 2
To print the entire book:
Step 1
Step 2
Step 3
Step 4
The Windows Print Dialog box appears.
Step 5
Sending CD Feedback
This CD was created with simplicity in mind. We hope that you find it easy to navigate and that it contains the information that you need to successfully install and configure your router. Please feel free to provide us with your feedback about the CD interface, the information on the CD, and the usefulness of the content.
To provide feedback directly to the Cisco 3200 Series Mobile Access Router documentation team, e-mail us at doccd-feedback-smb@cisco.com.
Technical Assistance
Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain online documentation, troubleshooting tips, and sample configurations from online tools by using the Cisco Technical Assistance Center (TAC) Web Site. Cisco.com registered users have complete access to the technical support resources on the Cisco TAC Web Site.
Cisco.com
Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information, networking solutions, services, programs, and resources at any time, from anywhere in the world.
Cisco.com is a highly integrated Internet application and a powerful, easy-to-use tool that provides a broad range of features and services to help you with these tasks:
•
•
•
•
•
If you want to obtain customized information and service, you can self-register on Cisco.com. To access Cisco.com, go to this URL:
Technical Assistance Center
The Cisco Technical Assistance Center (TAC) is available to all customers who need technical assistance with a Cisco product, technology, or solution. Two levels of support are available: the Cisco TAC Web Site and the Cisco TAC Escalation Center.
Cisco TAC inquiries are categorized according to the urgency of the issue:
•
•
•
•
The Cisco TAC resource that you choose is based on the priority of the problem and the conditions of service contracts, when applicable.
Cisco TAC Web Site
You can use the Cisco TAC Web Site to resolve P3 and P4 issues yourself, saving both cost and time. The site provides around-the-clock access to online tools, knowledge bases, and software. To access the Cisco TAC Web Site, go to this URL:
All customers, partners, and resellers who have a valid Cisco service contract have complete access to the technical support resources on the Cisco TAC Web Site. The Cisco TAC Web Site requires a Cisco.com login ID and password. If you have a valid service contract but do not have a login ID or password, go to this URL to register:
http://www.cisco.com/register/
If you are a Cisco.com registered user, and you cannot resolve your technical issues by using the Cisco TAC Web Site, you can open a case online by using the TAC Case Open tool at this URL:
http://www.cisco.com/tac/caseopen
If you have Internet access, we recommend that you open P3 and P4 cases through the Cisco TAC Web Site.
Cisco TAC Escalation Center
The Cisco TAC Escalation Center addresses priority level 1 or priority level 2 issues. These classifications are assigned when severe network degradation significantly impacts business operations. When you contact the TAC Escalation Center with a P1 or P2 problem, a Cisco TAC engineer automatically opens a case.
To obtain a directory of toll-free Cisco TAC telephone numbers for your country, go to this URL:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
Before calling, please check with your network operations center to determine the level of Cisco support services to which your company is entitled: for example, SMARTnet, SMARTnet Onsite, or Network Supported Accounts (NSA). When you call the center, please have available your service agreement number and your product serial number.
Posted: Wed Nov 1 10:54:04 PST 2006
All contents are Copyright © 1992--2006 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.
