Symbols
| A
| B
| C
| D
| E
| F
| G
| H
| I
| J
| K
| L
| M
| N
| O
| P
| Q
| R
| S
| T
| U
| V
| W
| X
| Y
| Z
Index: N
- name collisions: 1.2.1. The History of the Domain Name System
- ACLs and: 10.1. Address Match Lists and ACLs
- eliminating: 1.3. The Domain Name System in a Nutshell
- name daemon controller (ndc): 4.7.2. Check for Syslog Errors
- name field (resource records): 4.5. Host Name Checking (BIND 4.9.4 and Later Versions)
- name resolution (see resolution)
- name server library routines: 15.2.6. The Name Server Library Routines
- name server queries: 7.6.2.1. BIND 4.9 and 8 statistics
- name server records (see NS records)
- name servers: 1.3. The Domain Name System in a Nutshell
- 2.4. Name Servers and Zones
- accessing (see resolvers)
- adding: 8.1.2. Capacity Planning
- to NOTIFY lists: 10.3. DNS NOTIFY (Zone Change Notification)
- tips for where to locate: 8.1.2. Capacity Planning
- authenticated: 16.6.2. AFSDB
- authoritative: 2.4. Name Servers and Zones
- choosing among: 2.6.4. Choosing Between Authoritative Name Servers
- running over dial-on-demand: 16.4.7. Running Authoritative Name Servers over Dial-on-Demand
- backup name servers: 6.2.2. Local Name Server
- bogus, avoiding: 10.11. Avoiding a Bogus Name Server
- caching-only: 8.2.2. Caching-Only Servers
- capacity planning for: 8.1.2. Capacity Planning
- closest known: 2.6.2. Recursion
- compatibility with resolvers: 10.13. Compatibility
- configuring hosts to use: 6. Configuring Hosts
- control messages, configuring to listen for: 7.1.1. ndc and controls (BIND 8)
- controlling: 7.1. Controlling the Name Server
- debugging information about
- command for: 7.1.1. ndc and controls (BIND 8)
- disabled UDP checksums and: 14.5.5. Name Server Startup Fails Because UDP Checksums Disabled
- finding for root zone: 4.2.10. The Root Hints Data
- halting, command for: 7.1.2. rndc and controls (BIND 9)
- how many to run, guidelines for: 8.1. How Many Name Servers?
- initializing (debugging example): 13.3.1. Name Server Startup (BIND 8, Debug Level 1)
- internal database, command for copying: 7.1.1. ndc and controls (BIND 8)
- lame (see lame delegation)
- limiting query frequency: 10.12.1.1. Limiting transfers requested per name server
- local, configuring: 6.2.2. Local Name Server
- maintenance for: 10.12.3. Maintenance Intervals
- master (see primary master name server)
- mimicking queries with nslookup: 12.6.2. Querying Like a BIND Name Server
- monitoring: 7.6. Keeping Everything Running Smoothly
- multiple, nslookup and: 12.1.1. Multiple Servers
- network preferences for: 10.9. Preferring Name Servers on Certain Networks
- nonrecursive: 10.10. A Nonrecursive Name Server
- NS records and: A.1.2. Types
- options for: 6.1.6. The options Directive
- overworked, how to handle: 8.1.2. Capacity Planning
- partial-slave: 8.2.3. Partial-Slave Servers
- primary master (see primary master name server)
- queried by resolver: 6.1.4. The nameserver Directive
- reconfiguring, command for: 7.1.1. ndc and controls (BIND 8)
- registering: 8.3. Registering Name Servers
- reloading, command for: 7.1.1. ndc and controls (BIND 8)
- resolvers without: 6.2.1. Resolver Only
- restarting, command for: 7.1.1. ndc and controls (BIND 8)
- restricted (forward-only): 10.5.1. A More Restricted Name Server
- root (see root name servers)
- 10.10. A Nonrecursive Name Server
- root command and: 12.3. Option Settings
- roundtrip time and: 2.6.4. Choosing Between Authoritative Name Servers
- running two in one: 11.2.6. Two Name Servers in One
- security for (see security)
- selecting for resolver: E.5.3. nameserver
- setting up: 4. Setting Up BIND
- more than one, importance of: 2.4.2. Types of Name Servers
- slave (see slave name servers)
- 4.7. Running a Primary Master Name Server
- split-function: 11.2.5. Split-Function Name Servers
- starting, command for: 7.1.1. ndc and controls (BIND 8)
- statistics on
- command for: 7.1.1. ndc and controls (BIND 8)
- interpreting: 7.6.2. Understanding the BIND Statistics
- status information, command for printing: 7.1.1. ndc and controls (BIND 8)
- stopping/resuming, command for: 7.1.1. ndc and controls (BIND 8)
- 7.1.1. ndc and controls (BIND 8)
- switching with nslookup: 12.5.3. Switching Name Servers
- time spent running: 7.6.1. Common Syslog Messages
- troubleshooting, no response from: 12.7.2. No Response from Server
- two running concurrently, syslog messages and: 7.6.1. Common Syslog Messages
- types of: 2.4.2. Types of Name Servers
- upgrading BIND and: 14.4.2. Name Server Behavior
- where to run them: 8.1.1. Where Do I Put My Name Servers?
- name-to-address mapping: 2.6.6. Mapping Addresses to Names
- 4.2. Setting Up Zone Data
- 4.2. Setting Up Zone Data
- 4.2.6. Address and Alias Records
- A6 records and: 10.16.2.1. A6 records and forward mapping
- dynamic update and: 10.2. DNS Dynamic Update
- for IPv6 addresses: 10.16. IPv6 Forward and Reverse Mapping
- named boot file, /etc/named.boot file: 4.2. Setting Up Zone Data
- named-bootconf utility: 4.3. Setting Up a BIND Configuration File
- named manual page, finding server executable in: 4.7.1. Starting Up the Name Server
- named (name server daemon): 4.3. Setting Up a BIND Configuration File
- syslog messages emitted by: 7.6.1. Common Syslog Messages
- named-xfer utility: 7.1.3. Using Signals
- 14.2.1. How to Use named-xfer
- changing location of: 7.4. Changing System File Locations in BIND 8 and 9
- named.boot file, /etc/named.boot file: 4.3. Setting Up a BIND Configuration File
- named.conf file
- bastion host and: 11.3.5.1. Configuring the bastion host
- for caching-only name servers: 8.2.2. Caching-Only Servers
- distinguishing primary master name server from slave name server in: 4.8. Running a Slave Name Server
- /etc/named.conf file: 4.2. Setting Up Zone Data
- 4.3. Setting Up a BIND Configuration File
- modifying on slave name server host: 4.8.1. Setup
- key statement, adding to: 7.1.2. rndc and controls (BIND 9)
- for partial-slave name servers: 8.2.3. Partial-Slave Servers
- for running two name servers in one: 11.2.6. Two Name Servers in One
- named_dump.db file: 14.2.3. How to Read a Database Dump
- changing location of: 7.4. Changing System File Locations in BIND 8 and 9
- named.pid file: 7.1.3. Using Signals
- changing location of: 7.4. Changing System File Locations in BIND 8 and 9
- named.root file (see root hints file)
- namedroppers mailing list: 3.1.1. Handy Mailing Lists and Usenet Newsgroups
- updated root hints file sent to: 4.2.10. The Root Hints Data
- named.run file: 7.5. Logging in BIND 8 and 9
- 13.2. Turning On Debugging
- named.stats file: 7.1.1. ndc and controls (BIND 8)
- changing location of: 7.4. Changing System File Locations in BIND 8 and 9
- statistics dumped into
- BIND 9: 7.6.2.2. BIND 9 statistics
- BIND 4.9 and 8: 7.6.2.1. BIND 4.9 and 8 statistics
- nameserver directive: 6.1. The Resolver
- 6.1.4. The nameserver Directive
- E.5.3. nameserver
- namespace
- dividing up, guidelines for: 9.2. How Many Children?
- ip6.int: 10.16.1. AAAA and ip6.int
- split: 11.3.5. A Split Namespace
- split vs. shadow: 11.3.5. A Split Namespace
- nametype: 10.2.4. TSIG-Signed Updates
- naming conventions for subdomain names: 9.3. What to Name Your Children
- ncache category: 7.5.3.1. BIND 8 categories
- ndc (name daemon controller): 4.7.2. Check for Syslog Errors
- 7.1.1. ndc and controls (BIND 8)
- commands. equivalents for signals (list): 7.1.3. Using Signals
- ndots option: E.5.6. options ndots (4.9+)
- ndots setting: 6.1.6. The options Directive
- negative caching: 2.7. Caching
- 13.4. The Resolver Search Algorithm and Negative Caching (BIND 8)
- 14.5.7. Other Name Servers Don't Cache Your Negative Answers
- negative caching TTL value: 4.8.3. SOA Values
- negative_timeout option: 6.4.6. Silicon Graphics' IRIX
- net domain: 2.2.1. Top-Level Domains
- Net::DNS Perl module: 15.3. Perl Programming with Net::DNS
- TSIG-signed dynamic updates and: 11.1.4. Using TSIG
- netgroups file: 6.3.1. Differences in Service Behavior
- netsvc.conf file: 6.4.4.2. AIX 4.2.1
- Network File System (NFS): 6.3.1. Differences in Service Behavior
- Network Information Center (see NIC)
- Network Information Service (see NIS)
- 6.4.1. Sun's SunOS 4.x
- network interface interval: 10.12.3.2. Interface interval
- network masks: 11.2.3. Preventing Unauthorized Zone Transfers
- network names: 16.5. Network Names and Numbers
- network numbers: 16.5. Network Names and Numbers
- network registries: 3.2.4. Checking That Your Network Is Registered
- Network Solutions Inc.
- registration fees charged by: 3.2.5. Registering Your Zones
- as registry and registrar: 3.2.1. On Registrars and Registries
- 3.2.3.3. Choosing a registrar
- network time protocol (NTP): 11.1.3. Configuring TSIG
- network unreachable message: 6.1.4.1. One name server configured
- resolvers and: 8.5.1. Outages
- networks: 14.3.8. Loss of Network Connectivity
- (see also connectivity)
- /24 network, subnetting: 9.5.2.2. Class C networks
- 9.5.2.2.3. Solution 3
- checking registration of: 3.2.4. Checking That Your Network Is Registered
- ISDN: 16.6.3. X25, ISDN, and RT
- A.1.3. New Types from RFC 1183
- sending email across specific: 11.3.4.8. Mail to specific Internet domain names
- specifying with sortlist directive: 6.1.5. The sortlist Directive
- subnetted/subnetting: E.2.6. sortlist
- E.5.5. sortlist (4.9+)
- address sorting and: 10.8.1.3. Address sorting on subnetted networks
- on/off octet boundaries: 9.5.1. Subnetting on an Octet Boundary
- X.25: 16.6.3. X25, ISDN, and RT
- newsgroups
- for BIND: 3.1.1. Handy Mailing Lists and Usenet Newsgroups
- information about security vulnerabilities: 11.2.1. BIND Version
- Next-Level Aggregators (NLAs): 10.14. The ABCs of IPv6 Addressing
- NFS (Network File System): 6.3.1. Differences in Service Behavior
- NIC (Network Information Center): 1.2.1. The History of the Domain Name System
- 14.3.9. Missing Subdomain Delegation
- NIS domainname: 6.4.1.2. Using DNS with NIS
- NIS Makefile: 6.4.1.2. Using DNS with NIS
- NIS (Network Information Service): 1.5. Must I Use DNS?
- 6.4.1. Sun's SunOS 4.x
- domains in: 2.1.2. Domains
- nslookup and: 12.1.5. Using NIS and /etc/hosts
- SunOS 4.x, using without: 6.4.1.3. Ignoring NIS
- troubleshooting: 14.1. Is NIS Really Your Problem?
- NLAs (Next-Level Aggregators): 10.14. The ABCs of IPv6 Addressing
- no-check-names option: 6.1.6. The options Directive
- no-fetch-glue option: 10.10. A Nonrecursive Name Server
- 11.2.5.1. "Delegated" name server configuration
- E.2.10.3. options no-fetch-glue
- No NS Record for SOA MNAME message: 14.5.2. Name Server Reports "No NS Record for SOA MNAME"
- no PTR data for: 14.3.4. Added Name to Zone Data File but Forgot to Add PTR Record
- no-recursion option: 10.10. A Nonrecursive Name Server
- 11.2.5.1. "Delegated" name server configuration
- E.2.10.2. options no-recursion
- no response from server message: 12.7.2. No Response from Server
- no root name servers for class message: 7.6.1. Common Syslog Messages
- nod2 option (nslookup): 12.3. Option Settings
- nodebug option (nslookup): 12.3. Option Settings
- nodefname option (nslookup): 12.3. Option Settings
- nodes: 2.1. The Domain Name Space
- noexpired flag: 7.1.1. ndc and controls (BIND 8)
- noignoretc option (nslookup): 12.3. Option Settings
- non-octet boundaries, subnetting on: 9.5.2. Subnetting on a Non-Octet Boundary
- nonauthoritative nslookup answers: 12.5.2. Authoritative Versus Nonauthoritative Answers
- none (named address match list): 10.1. Address Match Lists and ACLs
- nonexistent domain message: 12.7.3. No PTR Record for Name Server's Address
- nonrecursive name servers: 10.10. A Nonrecursive Name Server
- nonrecursive queries: 2.6.2. Recursion
- 10.5. Forwarding
- SOA records and: 15.1.1. A Typical Problem
- nonrecursive resolution (see iterative resolution)
- norecurse option (nslookup): 12.3. Option Settings
- nosearch option (nslookup): 12.3. Option Settings
- 12.4. Avoiding the Search List
- NOTFOUND condition: 6.4.2. Sun's Solaris 2.x
- notice severity: 7.5. Logging in BIND 8 and 9
- notify category: 7.5.3.1. BIND 8 categories
- NOTIFY feature (BIND 8/9)
- propagation time and: 8.2.1. Primary Master and Slave Servers
- NOTIFY messages
- address sent from: 10.15.1. Configuring the IPv4 Transport
- announcements/responses and: 10.3. DNS NOTIFY (Zone Change Notification)
- sending to alternate ports: 10.15.1. Configuring the IPv4 Transport
- notify-source substatement: 10.15.1. Configuring the IPv4 Transport
- notify-source-v6 substatement: 10.15.2. Configuring the IPv6 Transport
- notrace command: 7.1.1. ndc and controls (BIND 8)
- novc option (nslookup): 12.3. Option Settings
- NS records: 4.2.5. NS Records
- A.1.2. Types
- no NS records for SOA MNAME message and: 14.5.2. Name Server Reports "No NS Record for SOA MNAME"
- order of in zone data files: 4.2.1. The Zone Data Files
- query statistics for: 7.6.2.1. BIND 4.9 and 8 statistics
- NSAP records, query statistics for: 7.6.2.1. BIND 4.9 and 8 statistics
- nscd daemon: 6.4.2.1. nscd
- nsd daemon: 6.4.6. Silicon Graphics' IRIX
- NSFNET network: 1.1. A (Very) Brief History of the Internet
- NSFNET traffic reports: 8.1.2. Capacity Planning
- ns_get32 routine: 15.2.6. The Name Server Library Routines
- ns_init_parse routine: 15.2.6. The Name Server Library Routines
- nslookup utility: 0.1. Versions
- 12. nslookup and dig
- CNAME records, looking up: 16.1.5. Looking Up CNAMEs
- vs. dig utility: 12.9. Using dig
- ending session of: 12.8. Best of the Net
- finding out what is looked up: 12.7.6. Finding Out What Is Being Looked Up
- interactive vs. noninteractive: 12.2. Interactive Versus Noninteractive
- inverse queries and: 2.6.7. Inverse Queries
- IP addresses, looking up with: 3.1.2. Finding IP Addresses
- mimicking name servers: 12.6.2. Querying Like a BIND Name Server
- option settings for: 12.3. Option Settings
- shell script programming: 15.1. Shell Script Programming with nslookup
- SOA record, finding with: 3.2.3.1. The us domain
- subdomains, searching for with: 3.2.2. Where in the World Do I Fit?
- switching name servers with: 12.5.3. Switching Name Servers
- tasks performed with: 12.5. Common Tasks
- testing
- primary master name server with: 4.7.3. Testing Your Setup with nslookup
- slave name server with: 4.8.1. Setup
- top-level domains, examining structure of with: 3.2.2. Where in the World Do I Fit?
- troubleshooting problems with: 12.7. Troubleshooting nslookup Problems
- using dig utility instead of: 12.9. Using dig
- .nslookuprc file: 12.3.1. The .nslookuprc File
- ns_msg_count routine: 15.2.6. The Name Server Library Routines
- ns_msg_get_flag routine: 15.2.6. The Name Server Library Routines
- ns_msg_id routine: 15.2.6. The Name Server Library Routines
- ns_name_compress routine: 15.2.6. The Name Server Library Routines
- ns_name_skip routine: 15.2.6. The Name Server Library Routines
- ns_name_uncompress routine: 15.2.6. The Name Server Library Routines
- NSORDER environment variable: 6.4.4.1. AIX 4.3
- ns_parserr routine: 15.2.6. The Name Server Library Routines
- ns_put32 routine: 15.2.6. The Name Server Library Routines
- nsswitch.conf file: 6.4.2. Sun's Solaris 2.x
- 6.4.3. HP's HP-UX
- 14.1. Is NIS Really Your Problem?
- Linux and: 6.4.7. Linux
- NSTATS messages: 7.6.1. Common Syslog Messages
- ns_update( ) resolver routine: 10.2. DNS Dynamic Update
- nsupdate utility: 10.2. DNS Dynamic Update
- TSIG-signed dynamic updates and: 11.1.4. Using TSIG
- NTP (network time protocol): 11.1.3. Configuring TSIG
- null channel: 7.5.2.4. Null channel
- null keys: 11.4.5.2. Null keys
- null label: 2.1.1. Domain Names
- NULL records: A.1.2. Types
- nxdomain statistic: 7.6.2.2. BIND 9 statistics
- nxrrset statistic: 7.6.2.2. BIND 9 statistics
- NXT record: 11.4.4. The NXT Record
Symbols
| A
| B
| C
| D
| E
| F
| G
| H
| I
| J
| K
| L
| M
| N
| O
| P
| Q
| R
| S
| T
| U
| V
| W
| X
| Y
| Z
Copyright © 2002
O'Reilly & Associates, Inc.
All Rights Reserved.
|