|
|
Table Of Contents
Symbols - Numerics - A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z
Master Index
Symbols
! character
comments FC-151
in copy output FC-178
in ping output FC-244
# character
in copy output FC-178
privileged EXEC prompt FC-12
. P2C-84
. character
in copy output FC-178
in ping output FC-244
in TFTP session output FC-245
> prompt FC-11
? command FC-19
^ character, in command output FC-20
^Z FC-13
| character
use in show and more commands FC-33
Numerics
100VG-AnyLAN port adapter
(examples) IC-76
configuring IC-42
10BASE-T IC-35
7-bit character set FC-81
8-bit character set FC-81
911 outgoing calls, MGCP support of VC-182
A
AAA (authentication, authorization, and accounting)
accounting
AV pairs SC-102
broadcasting SC-94
command type SC-91
compatibility with authentication proxy SC-297
configuring (example) SC-102
connection type SC-87
enabling SC-96
EXEC type SC-89
interim records SC-99
method lists (example) SC-81
methods (table) SC-97
monitoring SC-102
network configuration (figure) SC-83
network type SC-84
prerequisites SC-95
resource type SC-91
system type SC-90
verifying SC-102
ARAP authentication
authorized guest logins SC-34
guest logins SC-34
line password SC-34
local password SC-34
methods (table) SC-33
TACACS+ SC-35
authentication
configuring SC-24
(examples) 1
default, enable SC-39
double authentication SC-42to SC-45
methods SC-24
network configuration (figure) SC-22
server groups SC-22
authentication, two-way, restrictions SC-126
authorization SC-69
AV pairs SC-75
configuring SC-73
configuring (examples) SC-76to SC-80
for global configuration commands SC-74
network configuration (figure) SC-71
prerequisites SC-72
RADIUS SC-74
reverse telnet SC-75
server groups SC-71
TACACS+ SC-74
types SC-72
broadcast accounting SC-94
call tracking VC-264
configuring SC-19
disabling SC-20
DNIS SC-119
enable default authentication, methods (table) SC-39
enabling SC-19
gateway VC-255
gateways
configuration (example) VC-281
GGSN
configuration (example) MWC-57
configuring globally MWC-36
large-scale dial-out network security services DC-679
login authentication
enable password SC-27
Kerberos SC-27
line password SC-27
local password SC-27
methods (table) SC-26
RADIUS SC-28, SC-31, SC-35, SC-38
TACACS+ SC-28, SC-31, SC-35, SC-38
message banners
(examples) SC-58
failed-login banner, configuring SC-41
login banner, configuring SC-41
accounting SC-81
NASI authentication
enable password SC-37
line password SC-37
local password SC-37
methods SC-36
TACACS+ SC-38
POD (packet of disconnect) SC-42
configuration SC-42
example SC-59
PPP authentication SC-30
preauthentication SC-121
preauthentication overview DC-728
RADIUS
accounting SC-127
authentication SC-127
authorization SC-127
resource accounting SC-93
configuring SC-100
resource failure stop accounting SC-91
configuring SC-100
server groups
authentication SC-22
authorization SC-71
broadcast accounting SC-94
RADIUS, configuring SC-117
TACACS+, configuring SC-145
session MIB SC-94
configuration SC-102
example SC-106
SNMP SC-94
virtual profiles
AAA configuration (example) DC-501, DC-504
virtual template configuration (example) DC-502
VPN
configuring DC-524
local tunnel authentication DC-530
local tunnel authentication (examples) DC-564
VPN per-user configuration DC-538
AAA/TACACS+
ARA authentication, enabling TC-73
PPP authentication, enabling DC-399, DC-599
undefined list name, (caution) DC-598
AAA accounting
syslog records VC-259
aaa accounting command DC-679, VC-321
aaa accounting connection h323 command VC-261, VC-320
aaa accounting connection h323 start-stop radius command VC-493
aaa accounting resource start-stop group command SC-100
aaa accounting resource stop-failure group command SC-100
aaa authenication login h323 radius command VC-493
aaa authentication arap command TC-73
aaa authentication command DC-679
aaa authentication login command VC-261, VC-314, VC-318
aaa authentication nasi command TC-91
aaa authentication ppp command DC-399, DC-598, DC-599, MWC-36
aaa authentication ppp command: undefined list-name
(caution) SC-51
aaa authorization command DC-679, MWC-36
aaa authorization configuration default command DC-680
aaa new-model command DC-679, DC-680, MWC-36, VC-261, VC-314, VC-318, VC-493
aaa preauth command SC-121
AAA preauthentication configuration mode, summary FC-391
aaa route download command DC-680
AAL (ATM adaptation layer)
ATM traffic convergence VC-422
configuring WC-21
description WC-2
AAL3/4
and SMDS (examples) WC-107
static mapping WC-54
AAL5, configuring (example) WC-98
AAL5-LLC SNAP encapsulations and virtual circuit descriptors WC-55
AAL5-MUX, transparent bridging on WC-55
AAL5-NLPID, transparent bridging on WC-55
AAL5-SNAP, transparent bridging on WC-6
abbreviating commands FC-19
ABR (available bit rate) for ATM (example) WC-100
abr rate-factors command WC-22
absolute command FC-278
absolute-timeout command TC-14
accept dialin command WC-132
accept-dialin command DC-535
accept-dialin group configuration mode FC-418
accept-dialout command DC-537
accept-dialout group configuration mode FC-418
accept-lifetime command
DRP route authentication IPC-85
EIGRP route authentication IPC-266
access-class command IPC-98, TC-33, TC-134, WC-318
Access Concentrator, PPPoE over ATM WC-129
access control
AppleTalk P2C-16to P2C-25, TC-76
ARA TC-70
asynchronous interfaces (example) DC-43
bridging
using byte offset BC-110
using station names BC-110
DECnet P3C-48
IPX P2C-122to P2C-124, P2C-133
legacy DDR, configuring DC-371, DC-402to DC-403
NetBIOS filtering BC-109
outgoing calls, configuring DC-269, DC-371
VINES P3C-18
XNS P3C-127
access control, IP IPC-86, IPC-98
access control lists
See access lists
access-enable command SC-195
access-expression command BC-115
access expressions
combining administrative filters BC-113
configuration (examples) BC-139, BC-140
configuring BC-114
optimizing BC-115
access filters
NetBIOS configuration
(example) BC-136
description BC-109
SNAP frames (example) BC-138
SR/TLB configuration (example) BC-132
SRB access expressions, combining BC-113
access groups
See also GGSN access groups
access groups, DECnet P3C-48
access groups, IP IPC-98
access-list (encryption) command SC-343
access-list (extended) command QC-57
access-list (IP extended) command SC-195
access-list (standard) command QC-50
access-list additional-zones command P2C-19to P2C-20
access-list cable-range command P2C-21
access-list command BC-45, BC-112, DC-269, DC-355, DC-359, DC-867, IC-66, SC-193, VC-340, VC-345
DECnet P3C-47
IPX
SAP P2C-125
NLSP route aggregation filtering P2C-106to P2C-113
access-list compiled command IPC-95
access-list includes command P2C-21
access-list network command P2C-20, P2C-21
access-list other-access command P2C-21
access-list other-nbps command P2C-20
access-list rate-limit command QC-57
access lists
Apollo Domain
creating P3C-10
interface, applying to P3C-10
AppleTalk
cable ranges P2C-21
configuration (examples) P2C-60to P2C-70
displaying P2C-55
guidelines P2C-19
network numbers P2C-17
applying to interfaces SC-182
bridging
(caution) BC-48
defining BC-47
filtering by protocol type BC-46
redefining BC-115
CBAC
basic configuration SC-232
configuring SC-232
how it works SC-224
criteria statements, order of SC-181
DDR
IP DC-356
packets, interesting DC-402
transparent bridging DC-355
VINES DC-358
XNS DC-359
DECnet
configuring P3C-46
connect-initiate packets, filtering P3C-47
creating P3C-47
extended P3C-47
filters, adding to P3C-47
standard P3C-47
dialer groups DC-360
dialer profiles
DECnet DC-432
Ethernet type codes DC-436
IP DC-433
VINES DC-432
XNS DC-434
dynamic entries, deleting SC-199
GTS, configuring QC-224
IP
BGP access list filters IPC-300
configuration examples IPC-121, IPC-123
controlling NHRP initiation IPC-22
dynamic IPC-88
extended IPC-86, IPC-88, IPC-89
fragment control IPC-92
implicit deny when no match found IPC-89, IPC-92
inbound or outbound interfaces, applying on IPC-98
interface, applying to IPC-97
named IPC-89
numbered IPC-86
See Reflexive Access Lists
standard IPC-86, IPC-87, IPC-89
time-based IPC-96
undefined IPC-98
violations, accounting IPC-107
violations, logging IPC-88, IPC-91
virtual terminal lines, setting on IPC-98
IPX
configuration (examples) P2C-172to P2C-180
extended P2C-122
extended, creating P2C-125
implicit deny P2C-128
implicit masks P2C-128
input P2C-123
named P2C-125
NetBIOS
description 1
NLSP route aggregation P2C-122
routing table, filtering P2C-130
SAP, creating P2C-125
standard P2C-122
standard, creating P2C-125
time-based P2C-129
types P2C-122
violations, logging P2C-125, P2C-127
IPX MLS
configuration (example) XC-301
overview XC-267
restrictions XC-292
ISO CLNS, configuring P3C-86
LAT
configuration (example) TC-37
defining TC-32
legacy DDR, interface assignment DC-371, DC-402
named
extended, configuration mode FC-398
standard, configuration mode FC-412
numeric ranges for protocols (table) SC-180
overview SC-177
Policy Propagation via BGP feature QC-47
regular expression pattern matching in TC-204
specifying
by name SC-180
by number (table) SC-180
SRB
access expressions, altering BC-115
NetBIOS filtering BC-98
Turbo Access Control Lists IPC-95
using time-ranges with FC-277
using with WCCP FC-381
VINES
creating P3C-19
displaying P3C-26
extended P3C-18
simple P3C-19
standard P3C-18
types P3C-18
X.29, configuring TC-133
XNS
3Com (example) P3C-134
creating P3C-126
extended list P3C-125
standard list P3C-124
See also IKE; IPSec, access lists; IPSec, crypto access lists
access lists, X.29
(example) WC-343
creating WC-318
line, applying to WC-318
access-list within command P2C-21
access-list zone command P2C-20
access-mode command MWC-28, MWC-38
access-point command MWC-28, MWC-38
access-point configuration mode, summary FC-391
access-point list configuration mode, summary FC-392
access point lists
See GGSN access point lists
access-point name command MWC-28
access points
See GGSN access points
access restrictions, asynchronous interfaces DC-43
access services
protocol translation TC-6
access-violation command MWC-28
accounting
description VC-256
IPX
configuring P2C-151
database threshold P2C-152
enabling P2C-152
filters P2C-152
maximum transit entries P2C-152
overloaded acct-session ID field VC-257
per VLAN XC-313
statistics XC-143
syslog messages VC-259
accounting, DECnet
configuring P3C-48
database threshold P3C-49
enabling P3C-49
filters P3C-49
maximum transit entries P3C-49
accounting via RADIUS/TACACS+ VC-293
ACF message
RAS VC-223
ACL (access control lists)
See access lists
activation-character command FC-77
active SVCs and PVCs, displaying WC-292
adapter command BC-683, BC-698, BC-699
address command SC-388
addressed-key command SC-372, SC-388
addresses
Apollo Domain P3C-7
AppleTalk P2C-9
(example) P2C-10
network numbers P2C-9
asynchronous interfaces DC-151
default, configuring DC-151
dynamic, configuring DC-151
DECnet
(example) P3C-34
address translation P3C-38
MAC address P3C-34
mapping name P3C-39
filtering
destination BC-113
source BC-113
IP pooling TC-133
IPX P2C-79
(example) P2C-80
network numbers P2C-79
node numbers P2C-79
ISO CLNS
IS-IS NSAPs P3C-64
ISO IGRP NSAPs P3C-64
NSAPs, addressing structure of P3C-66
TARP P3C-99
Layer 2 MAC XC-8
Layer 3 XC-8
mapping XC-8
multicast filtering BC-43
SMDS WC-246
IP WC-251
multicast WC-246
structure WC-244
symbolic host X.25, configuring TC-135
unnumbered interfaces DC-150
unnumbered interfaces, (example) DC-48
VINES
(example) P3C-16
network number P3C-15
subnetwork number P3C-16
X.25
interface-based insertion and removal WC-295
IP-to-X.121 mapping WC-277, WC-280
modifying WC-290
PVC protocol WC-282
substituting in local route WC-296
X.121, setting WC-268
X.121 alias, setting WC-275
XNS P3C-122
address family configuration, NLRI to address family configuration, converting IPC-344
address family configuration mode, summary FC-392
addressing
Cisco Easy IP configuration (examples) DC-479
dynamic, configuring DC-48
addressing, in VLANs XC-321
address mapping, static WC-167
address pooling
DHCP DC-605
global default mechanism, local pooling DC-606
address pools
names, creating IPC-67
obtaining IP addresses IPC-63
address ranges, summarizing
IS-IS IPC-281
OSPF IPC-230
address resolution, establishing for IP IPC-12
adjacency levels, IS-IS, specifying IPC-278
administrative distance
BGP, setting IPC-317
definition IPC-366
administrative filtering
address
destination BC-113
MAC-layer BC-44
multicast BC-43
source BC-113
Token Ring BC-113
dynamically determined stations BC-43
LAT service announcements BC-48
protocol type BC-112
source-route bridging BC-111
admission control QC-246
ADSL (asymmetric digital subscriber line), PPP over ATM for WC-124, WC-146
advertise command IPC-144
AEP (AppleTalk Echo Protocol) P2C-2
AESA (ATM End System Address) embedded E.164 address format WC-77
AFI (authority and format identifier) field, NSAP addresses P3C-65
agent command IPC-145
aggregate-address command IPC-304
aggregate addresses, configuring for BGP IPC-303
AH (authentication header) SC-335
alarm-trigger blue command VC-552
algorithms
See IKE, algorithms
alias command FC-260
aliases
URL Prefixes FC-134
use in IOS File System (URL Prefixes) FC-134
use in ROM monitor mode FC-17
See also command aliases
alias static command VC-313
alias X.121 address, enabling WC-275
all-nets broadcasts, XNS P3C-129
allocate lu command BC-800, BC-813
ALPS (Airline Product Set)
ASCU configuration BC-497
circuit configuration BC-496, BC-501
configuration
task list BC-494
CPE central configuration BC-499
local peer IP address configuration BC-495
maintaining BC-503
MATIP
(example) BC-504
description BC-492
topology BC-492
monitoring BC-503
remote peer IP address configuration BC-495
remote router configuration BC-495
service message configuration BC-500
supported platforms BC-494
topology
(figure) BC-492
ALC protocol BC-492
mainframe access BC-492
MATIP protocol BC-492
TCP-based protocol BC-492
UTS protocol BC-492
verification BC-502
alps a1-map a2-map command BC-498
alps alias command BC-499
alps ascu command BC-498
ALPS ASCU configuration mode, summary FC-392
alps auto-reset command BC-499
alps circuit command BC-496
ALPS circuit configuration mode, summary FC-392
alps connection-type permanent command BC-496
alps default-circuit command BC-498
alps enable-alarms ascu command BC-501
alps enable-alarms circuit command BC-501
alps enable-alarms peer command BC-501
alps enable-ascu command BC-499
alps enable-circuit command BC-497
alps error-display command BC-499
alps host-hld host-link command BC-500
alps hostlink command BC-496
alps idle-timer command BC-497
alps keepalive command BC-495
alps lifetime-timer command BC-496
alps local-hld remote-hld command BC-496
alps local-peer command BC-495, BC-499
alps matip-close-delay command BC-496
alps max-msg-length command BC-498
alps mpx command BC-497
alps n1 command BC-497
alps n2 command BC-497
alps n3 command BC-497
alps poll-pause command BC-498
alps primary-peer command BC-496
alps remote-peer command BC-496
alps retry-option command BC-498
alps service-msg data-drop command BC-498
alps service-msg format command BC-498
alps service-msg-interval command BC-496
alps service-msg-list command BC-496
alps service-msg-list number command BC-500
alps service-msg status-change command BC-498
alps servlim command BC-497
alps t1 command BC-497
alps t2 command BC-497
alps translate command BC-500
alps update-circuit command BC-502
alternate endpoints VC-228
alternate gatekeeper
configuration (example) VC-286
configuration verification VC-271
ecosystem gatekeeper interoperability VC-233
AltGKInfo
in GRJ messages VC-234
in RRJ messages VC-234
AMI line, ones density IC-135
ANI/DNIS (automatic number identification/dialed number identification service)
delimiter, configuring DC-281
ANI/DNIS Delimiter for CAS Calls on CT1 feature DC-281
Annex G (X.25 over Frame Relay)
(example) WC-331
configuring WC-300
answer-address command VC-142
answer supervision reporting VC-232
antireplay security service SC-335, SC-379
AO/DI (Always On/Dynamic ISDN)
BACP and BAP negotiation DC-243
BACP default settings DC-247
called number prefix DC-247
called party number formats DC-247
clients
calls, starting DC-246
configuration (example) DC-249
configuring DC-246
interface configuration DC-246
PPP and BAP configuration DC-243
X.25 configuration DC-244
interfaces, configuring DC-246
link member receive only mode DC-246
MLP bundle
multiple links, configuring DC-246
process description DC-242
national and subscriber number formats DC-247
PPP over X.25 DC-241
servers
BACP default settings DC-248
client calls, configuring DC-247
configuring DC-247
configuring, (example) DC-250
incoming calls DC-247
MLP bundle, configuring DC-248
no outgoing option DC-247
PPP and BAP, configuring DC-244
traffic load DC-248
X.25
configuring 1
defaults 1
virtual access interface DC-241
X.25 SVC DC-240
AOC (Advice of Charge)
ISDN subscription service DC-318
See also ISDN, Advice of Charge
AOL (America Online), wholesale dial performance optimization DC-158
APN (access point name)
configuring MWC-28
description MWC-13
apollo access-group command P3C-10
apollo access-list command P3C-10
Apollo Domain
802.5 implementation P3C-2
access lists P3C-10
(example) P3C-13
addresses P3C-7
(figure) P3C-8
ARP P3C-2
ARP table P3C-12
bridging P3C-9
Cisco's implementation P3C-2
configuration
task list P3C-8
host number P3C-7
interfaces, displaying status of P3C-12
IP addresses, setting P3C-2
monitoring tasks P3C-12
network access P3C-9
network number P3C-7
paths, setting maximum P3C-11
bridging P3C-2
IP addresses, setting P3C-2
routing
concurrent P3C-9
enabling P3C-8
over WANs P3C-11
routing table entries
adding P3C-10
displaying P3C-12
update interval P3C-11
static routes, adding to routing table P3C-10
traffic, displaying statistics P3C-12
apollo maximum-paths command P3C-11
apollo network command P3C-9
apollo route command P3C-10
apollo routing command P3C-8
apollo update-time command P3C-11
APPC (Advanced Program-to-Program Communication)
connections to CTRC BC-581
PEM support for BC-586
AppleTalk
access control P2C-16to P2C-25, TC-76
access lists
cable ranges P2C-21
configuration (examples) P2C-60to P2C-70
displaying P2C-55
guidelines P2C-19
network numbers P2C-17
addresses
(example) P2C-10
definition P2C-9
network numbers P2C-9
remapping P2C-52
adjacent networks P2C-55
adjacent routers P2C-55
AEP (AppleTalk Echo Protocol) P2C-2
AppleTalk over IEEE 802.10 in VLAN, configuration (example) XC-351
ARP (Address Resolution Protocol) P2C-2
ARP table
See ARP table, AppleTalk
ATCP (AppleTalk Control Protocol) P2C-38
ATP (AppleTalk Transaction Protocol) P2C-2
AURP (AppleTalk Updated Routing Protocol) P2C-15, P2C-28
configuring P2C-28
enabling P2C-28
last-heard-from timer P2C-29
private path database, displaying P2C-55
routing update interval P2C-29
tunneling P2C-29
update-events queue, displaying P2C-55
cable range configuration (example) TC-85
cable ranges
definition P2C-9
interfaces, assigning P2C-13
remapping P2C-52
CAP P2C-33
checksums
generation and verification, disabling P2C-42
Cisco's implementation P2C-3
concurrent routing and bridging (CRB) P2C-16
configuration P2C-11
configuration (examples) P2C-57to P2C-75
CRB P2C-16
DDP P2C-2
DDR P2C-52
DDR, configuring DC-357
definition P2C-2
dialer profiles, configuring DC-432
discovery mode
(example) P2C-58
interfaces
dynamic 1
extended 1
discovery mode configuration (example) TC-85
domains P2C-49
domain router configuration P2C-50
domain router configuration (figure) P2C-50
encapsulation P2C-3, P2C-4, P2C-8, P2C-30, P2C-35
Enhanced IGRP P2C-15
active state time limit, adjusting P2C-49
bandwidth P2C-49
(example) 1
Cisco's implementation P2C-3, P2C-46
configuration (examples) P2C-59
disabling P2C-46
enabling P2C-15, P2C-28, P2C-46
features P2C-45
hello packets P2C-48
hold time P2C-48
interfaces, displaying P2C-55
neighbor adjacencies, logging P2C-49
neighbors, displaying P2C-55
route redistribution P2C-47
routing protocol, enabling P2C-46
split horizon P2C-48
topology table P2C-55
enhancements P2C-3
Ethernet card, using P2C-11
extended interface configuration (example) TC-85
extended interfaces
cable range, assigning P2C-13
configuration (example) P2C-58
proxy network numbers P2C-41
routing P2C-12, P2C-14, P2C-15
routing (example) P2C-58
zones, names P2C-13
extended network, definition P2C-8
fast switching
cache entries P2C-55
disabling XC-16
enabling XC-13
interfaces P2C-44
FDDITalk P2C-2
pre-FDDITalk packets P2C-54
filters
data packet P2C-22
(example) 1
zones 1
partial zones P2C-25
(example) 1
routing P2C-23
routing table P2C-24
routing table (example) P2C-60
routing update filters P2C-23
(example) P2C-66
establishing P2C-26
replies P2C-24
IEEE 802.10 encapsulation, enabling for XC-350
integrated routing and bridging
See AppleTalk, IRB
Inter·Poll P2C-56
interenterprise routing P2C-49
addresses, remapping P2C-52
AURP, (example) P2C-71
cable ranges, remapping P2C-52
configuration (example) P2C-76
domain information P2C-55
domain names P2C-51
domain numbers P2C-51
hop count P2C-52
interfaces P2C-51
remapping P2C-55
split horizon P2C-50
interfaces, monitoring TC-78
interface status P2C-55
internal network advertisements TC-68
Internet Router software P2C-11
internetwork parameters P2C-55
IPTalk
/etc/services file P2C-36
AppleTalk-to-IP address mapping P2C-35
configuration (example) P2C-72to P2C-75
definition P2C-33
IP encapsulation P2C-37
node identifier P2C-74
SLIP drivers P2C-33
tunneling P2C-35
UDP port numbers P2C-36
IRB P2C-16
K-Star, Shiva FastPath routers P2C-11
LANE P2C-3
load sharing, round-robin P2C-42
LocalTalk P2C-2
logical cable P2C-9
MacIP
(examples) P2C-72
addresses P2C-33
address ranges P2C-32
advantages P2C-31
clients P2C-55
clients, monitoring TC-78
configuration requirements P2C-31
definition P2C-30
disadvantages P2C-31
implementation P2C-31
servers, monitoring TC-78
traffic P2C-55
maximum paths, setting P2C-42
MIB P2C-3
monitoring tasks P2C-54
multicast address, SMDS address mapping to WC-246
name binding
See AppleTalk, NBP
name registration, task table P2C-55
services P2C-55
neighbor table, deleting entries P2C-54
network, definition P2C-9
network, monitoring TC-78
network address caution IC-179
network connectivity, testing P2C-55
network events, logging P2C-44
nondiscovery-mode interface P2C-14
nonextended interface
addresses, assigning P2C-12
routing (example) P2C-58
routing, enabling P2C-12
zone names, assigning P2C-12
nonextended interfaces
proxy network numbers P2C-41
routing P2C-15
nonextended network, definition P2C-8
over encapsulating VLAN interfaces, configuration (example) XC-339
over IEEE 802.10 encapsulation XC-349
packets P2C-35
performance tuning P2C-39
Phase 1
comparison with Phase 2 P2C-8
compatibility with Phase 2 P2C-10
definition P2C-7
Phase 2
comparison with Phase 1 P2C-8
compatibility with Phase 1 P2C-10
definition P2C-7
PPP, configuring DC-580, DC-602
pre-FDDITalk packets, enabling P2C-54
proxy network numbers
(example) P2C-75
interoperability P2C-41
responder support P2C-4, P2C-56
round-robin load sharing, enabling P2C-42
routing
(example) P2C-58
enabling
on nonextended interface dynamically 1
on nonextended interface manually 1
extended interfaces, enabling dynamically P2C-14
extended interfaces, enabling manually P2C-12
routing process P2C-15
routing protocols, specifying P2C-28
routing tables P2C-55
entries P2C-54
update filters P2C-23
update timers P2C-41
routing updates P2C-40
interval timer P2C-41
routes with no zones, advertising P2C-40
strict checking P2C-39
stub mode P2C-40
timers P2C-41
enabling P2C-28
routes with no zones, advertising P2C-40
routing updates P2C-40
strict checking 1
stub mode P2C-40
RTMP, broadcasting packets IC-175
seed router P2C-14
services, enabling TC-68
Shiva FastPath routers P2C-11
SMDS, configuring WC-250
SMRP
fast switching P2C-38
fast switching cache table P2C-54
forwarding table P2C-55
global information P2C-56
group table P2C-56
neighbor table P2C-56
port table P2C-56
routing table P2C-56
SNMP
configuration (example) P2C-71
configuring P2C-27
sockets, displaying P2C-55
defining P2C-53
displaying P2C-55
subinterface, configuring on XC-350
subinterface, routing over
VLAN, customizing XC-350
test mode, entering P2C-56
TokenTalk P2C-2
traffic P2C-55
traffic statistics, monitoring TC-78
traffic statistics, resetting P2C-54
transition mode P2C-15
(example) P2C-65
TR LANE support XC-373
tunneling IC-175
across IP-only backbone (example) IC-183
across IP-only backbone (figure) IC-184
AURP P2C-29
Cayman P2C-30
definition of IC-175
Update Routing Protocol
See AppleTalk, AURP
VLANs P2C-3
VLAN subinterfaces, routing over XC-349
WAN protocols supported P2C-3
ZIP
query interval P2C-43
reply filters
configuration (example) 1
overview 1
standard AppleTalk services P2C-2
zone information (table) TC-78
information table P2C-55
name format P2C-10
special characters P2C-10
zones, PPP access (example) DC-46
appletalk access-group command P2C-22
appletalk address command DC-609, P2C-12, WC-94
appletalk arp interval command P2C-43
appletalk arp retransmit-count command P2C-43
appletalk arp timeout command P2C-43
appletalk aurp-tickle-time command P2C-29
appletalk aurp update-interval command P2C-29
appletalk cable-range command DC-609, IC-179, P2C-13to P2C-16, P2C-27, XC-325, XC-350, XC-355
appletalk checksum command P2C-42
appletalk client-mode command DC-580, P2C-38
appletalk discovery command P2C-14, P2C-15
appletalk distribute-list in command P2C-23
appletalk distribute-list out command P2C-24
appletalk domain hop-reduction command P2C-52
appletalk domain name command P2C-51
appletalk domain remap-range command P2C-52
appletalk eigrp active-time command P2C-49
appletalk eigrp-bandwidth-percentage command P2C-49
appletalk eigrp log-neighbor-changes command P2C-49
appletalk eigrp split-horizon command P2C-48
appletalk eigrp timers command P2C-48
appletalk event-logging command P2C-27, P2C-44
appletalk free-trade-zone command P2C-26
appletalk getzonelist-filter command P2C-24
appletalk glean-packets command P2C-43
appletalk iptalk-baseport command P2C-36
appletalk lookup-type command P2C-26
appletalk macip dynamic command P2C-33
appletalk macip server command P2C-32
appletalk macip static command P2C-33
appletalk maximum-paths command P2C-42
appletalk name-lookup-interval command P2C-26
appletalk permit-partial-zones command P2C-25
appletalk pre-fdditalk command P2C-54
appletalk protocol command P2C-15, P2C-28, P2C-46
appletalk proxy-nbp command P2C-41
appletalk require-route-zones command P2C-40
appletalk route-cache command P2C-44, WC-252, XC-15, XC-16
appletalk route-redistribution command P2C-28, P2C-47
appletalk routing command P2C-12, P2C-27, P2C-46
appletalk routing eigrp command XC-325, XC-350, XC-354
appletalk rtmp jitter command P2C-41
appletalk rtmp-stub command P2C-40
appletalk send-rtmp command P2C-40
appletalk send-rtmps command TC-68
appletalk service command TC-68
appletalk static cable command P2C-53
appletalk static net command P2C-53
appletalk strict-rtmp-checking command P2C-39
appletalk timers command P2C-41
AppleTalk Transaction Protocol P2C-2
AppleTalk Transaction Protocol (ATP) P2C-2
AppleTalk Update Routing Protocol
See AppleTalk, AURP
appletalk virtual-net command DC-580, P2C-38
appletalk zip-query-interval command P2C-43
appletalk zip-reply-filter command P2C-25
appletalk zone command P2C-12, P2C-13, P2C-15, P2C-16, P2C-27, XC-325, XC-350, XC-355
application command VC-240, VC-243, VC-246, VC-247, VC-378, VC-493, VC-693
application command, in MGCP VC-187
application session command VC-379, VC-880
APPL statement
for CICS BC-579
for DB2 BC-583
label BC-583
APPN (Advanced Peer-to-Peer Networking)
See also SNASw
CMPC support BC-248, BC-674, BC-694
configuration
CMPC (examples) BC-716to BC-720, BC-724to BC-726
configuration modes FC-393
SNA-to-IP integration BC-3to BC-4
APPN (Advanced Peer-to-Peer Networking), TR LANE support XC-373
APS (automatic protection switching of Packet-over-SONET circuit)
(examples) IC-155
alarm reporting IC-133
BER thresholds IC-133
monitoring IC-133
protect interface IC-132
working interface IC-132
aps authenticate command IC-132
aps force command IC-132
aps group command IC-133
aps lockout command IC-133
aps manual command IC-133
aps protect command IC-132
aps revert command IC-133
aps timers command IC-133
aps unidirectional command IC-133
aps working command IC-132
ARA (AppleTalk Remote Access)
access control TC-70
automatic sessions, starting DC-155
automatic session startup, configuring TC-69
cables, connecting TC-67
configuration (example) TC-82
configuring TC-68
connectivity prerequisites TC-66
dedicated line (example) TC-84
guests, disabling TC-71
Inter-Poll verification tool TC-78
Kerberos security authentication TC-76
monitoring TC-77
multiuse line (example) TC-83
overview TC-65
PPP, configuring TC-66
security
CCL scripts, configuring TC-74, TC-75
internal username authentication TC-72
TACACS/ARA TC-73
TACACS username authentication (example) TC-86
servers
cabling and connections (example) TC-67
configuration (example) TC-82
lines, configuring TC-67
modems, configuring TC-67
monitoring TC-77
tunneling TC-123
one-step TC-131
two-step TC-124
X.25 client to AppleTalk network (example) TC-87
arap callback command DC-645
arap dedicated command TC-69
arap enable command DC-645, TC-68
arap net-access-list command TC-71
arap network command TC-68, TC-77
arap noguest command TC-71
arap require-manual-password command TC-70
arap timelimit command TC-69
arap use-tacacs command TC-73
arap warningtime command TC-69
arap zonelist command TC-71
ARE (all-routes explorer)
packet forwarding BC-90
area-address command P2C-94, P2C-105, P2C-114
area addresses
ISO IGRP P3C-64
area authentication command IPC-229
area default-cost command IPC-229
area nssa command IPC-229
area-password command IPC-281, P3C-78
area range command IPC-230
area routing
IS-IS P3C-68
ISO IGRP P3C-68
areas
IS-IS for CLNS
addresses P3C-74
establishing P3C-74
multihoming P3C-74
ISO CLNS
addresses P3C-64
multihoming P3C-74
ISO IGRP P3C-68
area stub command IPC-229
area tag, IS-IS P3C-73, P3C-75
area virtual-link authentication command IPC-231
ARP (Address Resolution Protocol)
ARP cache
See ARP tables
ARP table, AppleTalk P2C-2
ATM
(example) WC-105
configuration (example) WC-106
encapsulation IPC-14
IP
encapsulations, setting IPC-14
proxy ARP, description IPC-28
proxy ARP, disabling IPC-14
table, displaying contents IPC-48
timeout IPC-14
multicast address, SMDS address mapping to WC-246
overview of WC-9
See AppleTalk, ARP
SMDS broadcast messages WC-247
tables
IP
contents, displaying 1
defining static 1
ARP (Address Resolution Protocol), verifying entries (table) TC-78
ARP (AppleTalk Address Resolution Protocol) P2C-2, P2C-42
AppleTalk P2C-42
ARP, Apollo Domain P3C-2
ARP, AppleTalk P2C-2
arp arpa command IPC-14
ARP cache
See ARP table
arp command WC-247
arp probe command IPC-14
arp snap command IPC-14
ARP table
AppleTalk
entries P2C-54
gleaning P2C-43
update interval P2C-43
ARP table, Apollo Domain P3C-12
arp timeout command IPC-14
ARQ message
RAS VC-221
Ascend attributes, AV pairs (table) DC-682
ASCII
character widths, changing FC-82
dispatch character FC-86
escape character FC-78
hold character FC-78
padding FC-83
start character FC-86
stop character FC-86
ASP (asynchronous security protocol)
Cisco tunneling implementation BC-358
overview BC-361
primary and secondary role specification BC-369
virtual multidrop support BC-362
asp addr-offset command BC-369
asp role primary command BC-369
asp role secondary command BC-369
asp rx-ift command BC-369
ASSOCIATE request
asterisk, default X.28 router prompt TC-100
async-bootp command DC-149, FC-249
async default routing command DC-153
async dynamic address command DC-152, DC-852
async dynamic routing command DC-153
asynchronous group interfaces
CHAP authentication DC-36, DC-37
IP unnumbered DC-37
PAP authentication DC-36, DC-37
PPP encapsulation DC-36, DC-37
verifying DC-37
asynchronous host mobility IC-180
asynchronous host mobility, configuring DC-581
asynchronous host roaming (example) DC-581, IC-181
asynchronous interfaces
addressing methods
configuring DC-152
description DC-151
bandwidths
configuring optimal DC-160
broadcasts on DC-577
configuration options DC-26
dedicated network mode (example) DC-43
default addresses, configuring DC-151
dynamic addresses, configuring DC-151
dynamic addressing (example) DC-48
group and member (examples) DC-44
IPX loopback interfaces DC-579
large-scale dial-out (example) DC-692
low bandwidth DC-576
modem configuration (examples) DC-67
monitoring DC-44
network interface (example) DC-49
routing configuration (example) DC-577
TCP/IP header compression
(example) DC-48
configuring DC-160
troubleshooting DC-41
asynchronous interfaces, protocol functions
header compression TC-142
keepalive updates TC-142
vty lines TC-140
asynchronous mode, low-speed serial interface DC-150
asynchronous networks, frame sequencing overview BC-363
asynchronous protocol virtual multidrop support BC-362
Asynchronous Rotary Line Queueing feature DC-148
Asynchronous Transfer Mode-Data Exchange Interface
See ATM-DXI
async mode dedicated command DC-152
async mode interactive command DC-152, DC-581
AT&T latched CSU loopback, specification DC-298
ATCP (AppleTalk Control Protocol)
PPP, enabling DC-580
ATCP (AppleTalk Control Protocol), async interfaces P2C-38
ATG (address translation gateway)
(example) P3C-56
configuring P3C-38
routing table P3C-56
ATM
AAL, configuring WC-21
AAL3/4
(example) WC-107
AAL5, configuring (example) WC-98
AAL5-SNAP (example) WC-108
ABR (example) WC-100
AESA address format WC-77, WC-78
AIP
microcode WC-10
AXIS, PPP over ATM connection to WC-126
bridging, fast-switched transparent WC-55
buffer size WC-52
call setup, configuring WC-29
CES
ATM-CES port adapter, configuring CES on WC-87
CES network module, configuring CES on WC-80
clock source, configuring WC-91
overview of WC-79
virtual path shaping WC-92
See also CES (circuit emulation services) WC-79
channels, configuring WC-51
E.164 addresses WC-54
E.164 auto conversion WC-77
E1 IMA on Multiport T1/E1 ATM network module (example) WC-108
enabling WC-18
encapsulation, configuring WC-21
ESI addresses
(example) WC-103
configuring WC-31
exception-queue length WC-51
feature overview WC-5
ILMI
(example) WC-101
configuring WC-29
management
(example) 1
configuring 1
IMA
bandwidth considerations WC-76
configuring WC-59
E1 IMA on Multiport T1/E1 ATM network module (example) WC-111
groups, configuring WC-67
groups, verifying WC-71
interface, configuring WC-59
interface, verifying WC-63
restrictions WC-58
supported platforms WC-56
T1 IMA on Multiport T1/E1 ATM port adapter (example) WC-112
troubleshooting WC-75
interface types for WC-6
Inverse ARP
(example) WC-100
configuring WC-47
PVCs, configuring WC-23
IP and ARP
IP and Inverse ARP, configuring WC-47
IP multicasting, configuring WC-34
IP QoS, mapping VC-171
LFI
configuration (example) QC-334
fragment size for QC-328, QC-329
monitoring QC-332
overview QC-315
verifying QC-332
LIS WC-46
LLC/SNAP (example) WC-98
loopback mode WC-50
message identifiers WC-54
monitoring WC-96
MTU size WC-50
multicasting
IP, configuring WC-34
networks, RFC 1483 BC-108
network timing services
(example) WC-117
configuring WC-91
NSAP addresses
(example) WC-103
OAM
(example) WC-101
cells, flushing WC-96
loopback cells, configuring WC-24, WC-36
management, configuring WC-41, WC-43, WC-44
(example) 1
PPPoE over ATM (example) WC-151
PPP over ATM
Cisco proprietary (example) WC-150
description WC-119
IETF-compliant LLC encapsulated (example) WC-149
IETF-compliant MUX encapsulated (example) WC-145
NAS-Port format, configuring WC-138
RADIUS NAS-Port format WC-137
SVCs (example) WC-151
SVCs, configuring WC-128
SVCs, verifying WC-129
virtual templates WC-121
protocol addresses, configuring WC-20
protocols supported WC-9
pseudobroadcasting WC-3
PVC range
configuring WC-142
deactivating WC-143
number of PVCs in range WC-140, WC-143
point-to-point subinterface (example) WC-155
PVC within a range (example) WC-156
PVC within a range, configuring WC-144
PVC within a range, deactivating WC-144
PVCs
bit rates, configuring WC-21
broadcast packets, configuring WC-25
configuring (example) WC-98, WC-99
discovery (example) WC-100
discovery, configuring WC-22
PPPoE over ATM WC-132
traffic parameters, configuring WC-21
trap support (example) WC-101
trap support, configuring WC-24
VC classes, configuring WC-25
queue size, raw WC-52
(example) WC-106
routed bridge encapsulation
and concurrent bridging (example) WC-155
configuration (example) WC-155
configuring WC-141
overview WC-139
restrictions WC-140
security WC-140
subinterface grouping (example) WC-155
on an unnumbered interface (example) WC-155
verifying WC-141
RSVP considerations QC-265
RSVP over ATM network
See RSVP-ATM QoS Interworking
RSVP reservations, handling QC-249
SAR WC-19
serial interfaces
description WC-93
enabling WC-94
signalling
point-to-multipoint, configuring WC-33
SMDS, configuring WC-53
SONET PLIM, configuring WC-50
SSCOP
connection control timer, configuring WC-38
description WC-37
keepalive timer, configuring WC-38
poll timer, configuring WC-38
receiver windows, configuring WC-39
transmitter windows, configuring WC-39
static maps, displaying QC-362
SVC, point-to-multipoint IPC-428, IPC-430
SVCs
broadcast packets, configuring WC-37
call setup, configuring WC-29
configuring (example) WC-101, WC-103
disabling WC-39
OAM, configuring WC-44
PPP over ATM WC-128
traffic parameters, configuring WC-34
traffic shaping, configuring WC-36
VC classes, configuring WC-37
timeout intervals, configuring WC-32
transmit clock WC-48
transmit clock source WC-53
troubleshooting WC-96
UNI version override, configuring WC-32
VC classes, configuration (examples) WC-104
vci-to-vpi ratio WC-53
VCs
circuit bumping QC-353
classes, configuring WC-39, WC-40
configuring, classes WC-40
configuring, parameters WC-40
IP to ATM CoS, configuring QC-357, QC-362
limits, configuring WC-48
management, configuring WC-41, WC-42, WC-43, WC-44
per-VC CBWFQ, configuring QC-362
See also ATM VC bundles
VC status, displaying IPC-441
video
AAL1 VC-727
nonreal-time VBR SVC VC-724
over PVCs and SVCs VC-738
virtual circuits WC-8
virtual path filter WC-55
virtual path shaping WC-92
virtual templates, PPP over ATM WC-121
ATM (Asynchronous Transfer Mode)
extended label interface XC-178
forum XC-225
Forum protocols XC-142
interface, configuring XC-224
interfaces XC-168
label switches
partitioning resources XC-87
VCI table entries, creating XC-87
LANE
in VLANs XC-319
LECs XC-320
LESs XC-320
NDIS-compliant LAN drivers XC-319
ODI-compliant LAN drivers XC-319
protocol definition XC-319
LSR network configuration XC-226
MPLS subinterface XC-224
port adapter XC-137
subinterface XC-174
VCs XC-98
with LSRs, configuring XC-167
WRED XC-221
ATM, fast switching IPX P2C-120
atm aal aal3/4 command WC-54
atm-address command XC-378, XC-447, XC-453
atm arp-server self command WC-47
atm clock internal command VC-755, WC-53
atm command VC-758
ATM-DXI (Asynchronous Transfer Mode-Date Exchange Interface), encapsulation IC-87
atm-dxi map command IC-85
atm e164 auto conversion command WC-78
atm esi-address command WC-31, WC-34
atm exception-queue command WC-51
atm framing command WC-50
atm ilmi-keepalive command WC-29
atm ilmi-pvc-discovery command WC-22
ATM LANE
address
wildcards in templates XC-376
MAC address and ESI field XC-375
atm lecs-address command XC-380
atm lecs-address-default command XC-380
ATM-LSR (ATM label switch router)
adding redundancy XC-129
definition XC-116
atm manual-well-known-vc delete command XC-238
atm max-channels command WC-51
atm maxvc command WC-52
atm mid-per-vc command WC-55
atm multicast command WC-54
atm multipoint-interval command WC-34
atm multipoint-signaling (IP multicast) IPC-430
atm multipoint-signalling command WC-34
atm nsap-address command WC-31
atm oam flush command WC-96
ATM on the AIP for Cisco7500 series (examples) WC-97, WC-145
ATM port adapters
(example) WC-118
interface types WC-3
atm pvc ilmi command XC-379
ATM PVC-in-range configuration mode, summary FC-395
atm pvc qsaal command XC-379
atm pvp command WC-92
atm rate-queue command WC-50
atm rate-queue tolerance svc command WC-49
atm rawq-size command WC-52
atm route-bridge command WC-141
atm rxbuff command WC-52
atm scramble-enable command VC-739
atmsig close atm command WC-39
atm sig-traffic-shaping strict command WC-34, WC-36
atm smds-address command WC-54
atm sonet stm-1 command WC-50
ATM switches
adding redundancy XC-129
compared to an ATM label switch XC-87
functioning as an IP router XC-87
interfaces, configuring XC-118
LSC
redundancy
configuring 1
partitioning XC-128
atm txbuff command WC-53
atm uni-version command WC-32
ATM UNI version override, configuring WC-24
ATM VC bundle configuration mode, summary FC-393
ATM VC bundles
attributes, configuring QC-358
bundle management
benefits QC-351
differentiated service QC-349
IP Precedence, matching QC-349
multiple VCs QC-350
VC bundle members QC-348, QC-359
class assignment QC-359
creating QC-357
members
adding QC-359
attributes, configuring QC-360
configuring QC-360
VC class, applying to QC-360
monitoring QC-362
parameters, configuring QC-358
VC class
attaching QC-359
attributes QC-358
configuring QC-358
ATM VC class configuration mode, summary FC-394
ATM VC configuration mode, summary FC-393
ATM VC group configuration mode, summary FC-394
atm vc-per-vp command WC-53
atm video aesa command VC-740
atm vp-filter command WC-54, WC-55
attack signatures
See Cisco IOS Firewall IDS
audio prompt files VC-487
audit rule
See Cisco IOS Firewall IDS, audit rule
audit trails
CBAC messages SC-249
DNSIX facility SC-426
See also CBAC, audit trail
authen before-forward command DC-539
authentication
CAs SC-369
description VC-255
dynamic IPC-86
EIGRP, packets IPC-266
EIGRP, route IPC-265
key-chain
using for SA Agent operations FC-350
benefits SC-417
configuration information for protocols SC-421
key chains SC-420
process SC-418
protocols SC-418
types SC-418
NHRP, configuring IPC-22
of DRP queries and responses IPC-84
route SC-12
route authentication SC-417
services VC-367
user, overview SC-11
See also IKE, extended authentication; lock-and-key
authentication, MD5
See MD5 authentication
authentication command MWC-42, SC-385
authentication database
rsh FC-251
authentication proxy SC-3, SC-289
accounting SC-297
applying SC-295
cache entries, deleting SC-306
CBAC requirement SC-299
comparison with Lock-and-Key feature SC-298
compatibility
with CBAC SC-297
with NAT SC-296
with VPN SC-297
configuration tasks SC-299
denial-of-service attack protection SC-298
dynamic ACL entries, displaying SC-305
HTTP trigger SC-290
login page (figure) SC-291
login status message (figure) SC-292
maintaining SC-305
monitoring SC-305
operation
with JavaScript SC-292
without JavaScript SC-292
passwords, one-time SC-295, SC-296
prerequisites SC-299
restrictions SC-299
secure authentication SC-292
spoofing, risk of SC-298
using SC-293
verifying configuration SC-299, SC-302
authentication proxy operation using one-time passwords SC-296
authoritative time source
hardware clock FC-266
NTP FC-271
autobaud command FC-87
use with autoselect command FC-87
autocommand command DC-157, DC-173, SC-195
autocommand menu command FC-111
autocommand telnet /stream command DC-159
autocommand telnet-faststream command DC-159
auto-cost command IPC-232
auto-cut-through command VC-80
autodetect encapsulation command DC-203, DC-205, DC-269
AUTOGEN definition, SDLLC BC-445
autohangup command DC-33
AutoInstall FC-41
requirements FC-52
AutoInstall for router connections, using BC-582
Automatic Protection Switching of Packet-over-SONET Circuits
See APS
automatic receiver polarity reversal
enabling IC-58
autonomous bridging BC-41
autonomous switching
configuration (example) BC-141
source-route bridging BC-117
autonomous systems
autonomous system path comparison, disabling IPC-295
BGP
autonomous system paths to remote networks, providing IPC-294
exchange of routing information between IPC-285
definition XC-106
EBGP routing, configuring XC-164
forwarding packets XC-110
IGRP
(example) IPC-376
more than one connection to an external network IPC-213
number, gateway of last resort IPC-213
redistribution from IPC-364
system routes within IPC-213
maintaining the LFIB XC-109
number needed for EGPs IPC-3
OSPF
autonomous system network map (figure) IPC-247, IPC-381
routing for destinations outside autonomous system IPC-229
routing between XC-107
auto-polarity command IC-58
autoselect arap command DC-645
autoselect command DC-60, DC-155, TC-69
use with autobaud command FC-87
autoselect during-login command DC-60
Autoselect incoming protocol sensor DC-155
autoselect ppp command DC-641, DC-643
auto-summary (BGP) command IPC-304
auto-summary (Enhanced IGRP) command IPC-263
auto-summary (RIP) command IPC-206
auxiliary ports
asynchronous serial interfaces, configuring DC-154
AV (attribute-value) pairs
AAA server attributes DC-699
Ascend attributes DC-681
Ascend attributes (table) DC-682
map class DC-681
per-user configuration attributes DC-699
RADIUS attributes DC-681
RADIUS attributes (table) DC-700
TACACS attributes (table) DC-700
average rate shaping, configuring QC-230
AXIS (ATM switched interface shelf)
PPP over ATM connection to WC-126
B
backbone
high-speed transport VC-171
network XC-99
provider XC-102
services XC-97
backbone router
interfaces for TMS collection, setting XC-42
backbone routers, QoS functions QC-2
backup, stateless IPC-139
backup delay command DC-456, WC-194
backup enable and disable delay, specifying WC-194
backup interface command DC-455
backup interfaces
configuring WC-194
dialer profiles DC-459, DC-463
overview DC-453
See also dial backup, serial interfaces; serial interfaces
backup interfaces, Frame Relay WC-193
backup load command DC-455
backup server table
IPX, Enhanced IGRP P2C-92
BACP (Bandwidth Allocation Control Protocol)
active mode DC-664
BRI interface (example) DC-669
configuring DC-667
dialer interfaces only DC-664
BRI interface (example) DC-672
configuration (examples) DC-669to DC-672
configuration options DC-664
default parameter values, configuring DC-667
default passive mode DC-666, DC-679
default settings DC-667
dialer rotary
different dial-in numbers (example) DC-670
one dial-in number (example) DC-671
dialer support, legacy DDR DC-664, DC-677
interfaces
monitoring DC-668
physical restrictions DC-664
serial DC-664
virtual DC-664
line speeds DC-665
link types DC-665
multilink bundle creation (example) DC-670
operating environments DC-663
outgoing calls, dialer maps used for DC-668
passive mode
default DC-664
dialer rotary group (example) DC-669
virtual template interface (example) DC-670
PPP bandwidth allocation control, configuring DC-666
prerequisites DC-663
PRI (example) DC-672
temporary dialer maps DC-668
troubleshooting DC-669
bandwidth (policy-map class) command QC-89, QC-136
bandwidth command DC-665, VC-763
service policies QC-125
traffic classes QC-188, QC-192, QC-404
bandwidth consumption
IP Tax VC-165
bandwidth on demand, load threshold DC-375, DC-405
bandwidth percentage for EIGRP IPC-260
bandwidth planning
Cisco hoot and holler VC-834
bandwidth remote command VC-763
allocation
CBWFQ QC-90
IP RTP Priority QC-94
LLQ QC-98
changing QC-238
in virtual trunks XC-120
management QC-112
maximum reserved QC-95, QC-112
on XTagATM interfaces XC-128
priority command, guaranteeing with QC-102
RSVP considerations QC-263
specifying XC-127
bandwidths, AppleTalk Enhanced IGRP P2C-49
bandwidths, configuring optimal DC-160
banner exec command FC-100
banner incoming command FC-100
banner login command FC-100
banner motd command FC-99
banners
avoiding SLIP-PPP connectivity problems with FC-101
disabling or enabling on a line FC-101
(example) FC-115
incoming message FC-100
line-activation FC-100
LOGIN FC-99
message-of-the-day FC-99
on a line, disabling or enabling FC-101
SLIP-PPP DC-587
SLIP-PPP (example) DC-589
tokens DC-587
token variables FC-99
See also messages
banners, line numbers TC-14
banner slip-ppp command DC-587
banner tokens
(example) FC-115
description FC-99
Banyan VINES
in VLANs XC-321
LANE support XC-373
over ISL encapsulation XC-326
configuration (example) XC-340
See VINES
TR LANE support XC-373
battery reversal command VC-83
baud rate
session, configuring for a TC-12
terminal line, configuring for a TC-11
See also line speeds
baud rates
automatic detection, configuring FC-87
setting for a line FC-87
Bc (committed burst size), Frame Relay WC-166
beacon command IPC-516
bearer channels
E1 or T1
configuring VC-644
BECN (backward explicit congestion notification) WC-215
feedback for frame-transmission rate, enabling WC-166
FRTS QC-218
GTS QC-214
benefits XC-143
benefits of QoS enhancements
service provider benefits XC-116
BERT (bit error rate tester)
testing IC-116
BERT/TDM
configuration, verifying IC-116
configuration of IC-115
description of IC-125
E2 clock rate, configuring (example) IC-152
profile configuration (example) IC-152
best-effort service, defined QC-4
BFE (Blacker Front End)
(example) WC-340
address conventions (figure) WC-313
configuring WC-312
encapsulation WC-314
encryption WC-314
general statistics, displaying WC-319
IP address conventions (figure) WC-313
BGP (Border Gateway Protocol)
administrative distance
defaults IPC-359
setting IPC-317
advertisement interval IPC-313
aggregate routes, configuring IPC-303
(example) IPC-333
authentication on TCP connection IPC-315
automatic network number summarization, disabling IPC-304
autonomous system IPC-361
backdoor routes, configuring IPC-317
Cisco implementation IPC-285
classless interdomain routing (CIDR) IPC-286, IPC-303
community filtering IPC-304
community list matching IPC-361
Conditional Advertisement
configuration (examples) IPC-335
configuration tasks IPC-307
configuring IPC-307
overview IPC-306
troubleshooting tips IPC-308
verifying IPC-307
confederation IPC-308
configuration, BGP (examples) IPC-324to IPC-335
configuration, neighbor (example) IPC-328
configuration, route maps (example) IPC-325
configuration task list IPC-287
connections
immediately, resetting EBGP IPC-303
status, displaying IPC-324
default local preference value, changing IPC-318
enabling IPC-289
filter IPC-313
IP access (example) DC-867
IP routing table, updating IPC-317
mesh reduction
confederation method IPC-308
route reflector method IPC-309
metric translations IPC-363
multicast
See multiprotocol BGP
Multi Exit Discriminator (MED) metric IPC-302
multipath support IPC-287
multiprotocol BGP IPC-341
neighbor options IPC-305
neighbors, configuring IPC-289
neighbors, disabling IPC-316
network 0.0.0.0, redistributing IPC-318
next hop processing, disabling IPC-300
path filtering by neighbor IPC-300
peer groups
clearing IPC-323
configuring IPC-312
disabling IPC-316
displaying IPC-324
PE to CE routing sessions, configuring XC-156
prefix filtering with inbound route maps IPC-303
prefix limit IPC-313
route dampening
dampened routes, displaying IPC-323
dampening information, clearing IPC-323
description IPC-320
enabling IPC-321
factors, configuring IPC-322
flap statistics, clearing and displaying IPC-322
routes, unsuppressing IPC-323
route filtering by neighbor IPC-296
route maps IPC-361
route reflector IPC-309to IPC-312
route selection rules IPC-285
routing domain confederation IPC-308
routing sessions, configuring XC-155
supernets IPC-303
synchronization with IGPs IPC-294
TCP MD5 authentication
for a neighbor IPC-315
for a peer group IPC-314
timers, adjusting IPC-317
version, controlling IPC-302
Version 4 IPC-286
weight, configuring IPC-295
BGP (Border Gateway Protocol), policy propagation
See Policy Propagation via BGP
BGP (Border Gateway Protocol), sessions staying up IC-169
bgp always-compare-med command IPC-319
bgp bestpath as-path ignore command IPC-295
bgp bestpath med-confed command IPC-319
bgp bestpath missing-as-worst command IPC-319
bgp client-to-client reflection command IPC-312
bgp cluster-id command IPC-311
bgp confederation identifier command IPC-308
bgp confederation peers command IPC-309
bgp dampening command IPC-321
bgp default local-preference command IPC-318
bgp deterministic med command IPC-320
bgp fast-external-fallover command IPC-303
bgp log-neighbor-changes command IPC-324
bgp-policy command QC-48
bidirectional mode, Frame Relay end-to-end keepalive WC-184
billing services VC-367
binary synchronous communications
See bisync
BIND
RAS text record (example) VC-307
bindid command IPC-142
binding, DNIS-plus-ISDN-subaddress DC-193
bind-time security BC-582
bisync (binary synchronous communication)
active poll list specification BC-369
address on a contention specification BC-368
central router specification BC-369
character set specification BC-368
connection retry specification BC-369
extended addressing, non-standard address specification BC-369
frame sequencing BC-362
full-duplex mode specification BC-369
local acknowledgment peer configuration BC-370
multidrop configuration BC-360
non-standard address specification BC-369
overview BC-358
passthrough peer configuration BC-370
polling cycle specification BC-369
poll timeout specification BC-369
primary role specification BC-369
protocol options BC-368
secondary role specification BC-369
traffic encapsulation and routing BC-215, BC-358
bisync (binary synchronous communicatons), primary and secondary roles IC-88
bit control, setting for FDDI IC-56
bit settings XC-113
black box screening
See RPM, call discriminator profiles; Cisco RPM CLID/DNIS Discriminator feature
block-caller command VC-864, VC-866
blocking calls
See ISDN PRI Class of Restrictions VC-148
blocking new calls, in MGCP VC-189
boot bootldr command FC-233, FC-234
boot buffersize command FC-163, FC-164
boot config command FC-172, FC-233
BOOT environment variable
configuring FC-435
description FC-232
displaying FC-151, FC-179, FC-229
boot field
See configuration register boot field
bootfile command IPC-71
boot flash command FC-238
boot host command FC-175
boot images
description FC-178
helper FC-234
See also system images
booting
fault-tolerant strategy FC-201
Flash memory FC-197
Flash load helper FC-216
from a network server FC-199
(example) FC-200
improving load time FC-165
information, displaying FC-229
interrupting FC-236
manually
Flash memory (example) FC-238
network file (example) FC-239
ROM monitor FC-237
process FC-225
(figure) FC-228
ROM FC-201
startup configuration file FC-225
system image, selecting FC-226
booting from a network server
over Frame Relay (example) WC-216
over X.25 (example) WC-341
BOOTLDR environment variable
(example) FC-234
configuring FC-234
description FC-232
setting FC-234
boot mop command FC-240
boot network command FC-164
BOOTP
using for AutoInstall FC-42
services, accessing FC-261
BOOTP (Bootstrap Protocol) requests DC-576
configuring DC-149
boot register
See configuration register boot field
boot system command FC-200, FC-233, FC-438
boot system flash command FC-198, FC-202
boot system mop command FC-200
boot system rcp command FC-200
boot system rom command FC-201, FC-202, FC-246
boot system tftp command FC-200
bottlenecks XC-98
bounded delay XC-114
BPDUs (bridge protocol data units)
description BC-51
intervals
forward delay, adjusting BC-51
hello packets BC-51
maximum idle, adjusting BC-52
Branch Extender
See SNASw, BEX
Break key
using to enter ROM monitor mode FC-16
bridge
group
interface, assigning BC-28
number, assigning BC-28
root BC-50
tables
description BC-43
static and dynamic entries BC-43
See RSRB; SR/TLB; SRB; SRT
bridge acquire command BC-43
bridge address command BC-45
bridge bridge command BC-40
bridge circuit-group pause command BC-58
bridge circuit-group source-based command BC-58
bridge cmf command BC-58
bridge crb command BC-37, P2C-16, P2C-84, P3C-9, P3C-38
DECnet P3C-37
ISO CLNS P3C-67
VINES P3C-18
XNS P3C-124
bridge domain command BC-42
bridge forward-time command BC-51
bridge-group aging-time command BC-43
bridge-group cbus-bridging command BC-41
bridge-group circuit command BC-58
bridge group command DC-401, DC-403, DC-437
bridge-group command BC-31, BC-34, BC-178, WC-56, WC-193, XC-357, XC-358
LAPB WC-264
SMDS WC-250
bridge-group input-lsap-list command BC-47
bridge-group input-type-list command BC-47
bridge-group lat-compression command BC-42
bridge-group output-address-list command BC-46
bridge-group output-lat-service-deny command BC-49
bridge-group output-lat-service-permit command BC-49
bridge-group output-lsap-list command BC-47
bridge-group output-pattern command BC-48
bridge-group output-type-list command BC-47
bridge-group path-cost command BC-51
bridge-group priority command BC-50
bridge-group spanning-disabled command BC-52
bridge hello-time command BC-51
bridge irb command BC-38
bridge lat-service-filtering command BC-49
bridge max-age command BC-52
bridge multicast-source command BC-43
bridge priority, spanning tree BC-50
bridge priority command BC-50
bridge protocol command BC-27, BC-152, BC-179, DC-355, DC-435, WC-56
LAPB WC-264
bridge route command BC-39
bridging
over ATM, transparent WC-55
between dissimilar media
description BC-13
concurrent routing and bridging BC-37
duplicate bridge definition
(caution) BC-85
extended access list
(caution) BC-48
Frame Relay BC-34
IRB
configuring BC-37
enabling BC-38
overview BC-22
multicast address, SMDS address mapping to WC-246
SMDS WC-250
SRT overview BC-25
transparent
See SR/TLB
transparent bridging overview BC-22
X.25 BC-36
X.25, configuring WC-283
bridging domain XC-311
broadcast accounting SC-94
broadcast-and-unknown server (BUS) XC-372
broadcast command QC-358, WC-25, WC-37
broadcast queue for Frame Relay
creating WC-195
overview of WC-195
broadcast routing timer P3C-52
broadcasts
asynchronous interfaces DC-577
asynchronous serial traffic over UDP DC-171
control XC-313
domain XC-311
Layer 2 XC-312
IGRP
update frequency IPC-214
IP
and transparent bridging spanning-tree protocol IPC-33
definition IPC-31
directed IPC-31
flooding (example) IPC-60
solution to storms IPC-31
types IPC-31
IPX
forwarding P2C-133, P2C-137, P2C-147
type 20 packets P2C-135, P2C-136
management
in VLANs XC-321
Net/One P3C-122
VINES
forwarding P3C-25
serverless networks P3C-18
XNS
directed P3C-129
forwarding P3C-130
local P3C-129
broadcasts, SMDS
(example) WC-257
ARP messages WC-247
enabling WC-247
IP networks WC-251
pseudobroadcasting, configuring WC-252
broadcasts, transparent bridging (example) BC-70
BSC (Base Station Controller)
(figure) MWC-12
description MWC-12
bsc char-set command BC-368
bsc contention command BC-368
bsc dial-contention command BC-369
bsc extended-address command BC-369
bsc pause command BC-369
bsc poll-timeout command BC-369
bsc primary command BC-369
bsc retries command BC-369
bsc secondary command BC-369
bsc servlim command BC-369
BSDS (Bootstrap Data Set) BC-583
BSS (Base Station Subsystem), description MWC-12
BSTUN (Block Serial Tunneling)
ASP overview BC-361
asynchronous networks, frame sequencing overview BC-363
bisync
(examples) BC-370
configuration BC-368
frame sequencing, overview BC-362
bstun route command BC-367
Cisco implementation BC-215, BC-358
configuration
(examples) BC-370
task list BC-363
description BC-358
DLCI mapping BC-366
enabling BC-364
features BC-215
Frame Relay
encapsulation BC-365
local acknowledgment (example) BC-384
local acknowledgment configuration BC-345
passthrough (example) BC-384
frame sequencing overview BC-362
frame specification BC-367
group configuration BC-364
group serial interface, assigning BC-366
local acknowledgment (example) BC-384
monitoring BC-370
passthrough configuration (example) BC-384
protocol
adplex BC-364
adt-poll-select BC-364
adt-vari-poll BC-364
async-generic BC-365
bsc BC-364
bsc-local-ack BC-364
configuration BC-364
diebold BC-365
mdi BC-365
serial interface, configuration BC-366
traffic queueing priority
configuration BC-368
customizing BC-368
bstun group command BC-366
bstun protocol-group command BC-364
bstun route command BC-367
BTS (Base Transceiver Station)
(figure) MWC-12
description MWC-12
buckets-of-history-kept command FC-348
buffer-length command FC-86
buffers
editor, pasting from FC-26
SDLC, controlling size BC-402
system
(examples) FC-283
size, changing FC-281
buffers command DC-186, DC-210, FC-281
buffers huge size command FC-281
buffer sizes, ATM WC-52
bump command QC-360
bundle command QC-357
bundles
MLP Inverse Multiplexer DC-619
MMP DC-631
bundles, VCs
See ATM VC bundles
burst factor, configuring QC-276
burst size XC-221
burst size, configuring QC-140
BUS XC-365
bus-and-tag channel
data rate configuration BC-632
busy-message command FC-98, TC-17
busyout, ISDN B channel (example) DC-302
busyout forced command VC-561
busyout monitor ethernet command VC-564
busyout monitor interface command VC-559
busyout monitor probe command VC-562, VC-564
busyout monitor serial command VC-563
busyout seize command VC-560
busyout-voice-port command VC-558
BVI (bridge-group virtual interface)
creating BC-39
secondary IP address BC-39
BXM (Broadband Switch Module)
locating XC-179
supported virtual interfaces XC-121
byte offset, access control BC-110
C
CA (Call Agent), in MGCP VoIP network VC-5, VC-179
cablelength command IC-106
cable ranges
AppleTalk, configuring TC-86
See AppleTalk, cable ranges
cache
MLS XC-254
cache engine clusters FC-373
cache engines FC-373
cache farms
See cache engine clusters
cache imposition reply
MPOA XC-440
cache-imposition request
MPOA XC-440
cadence-list command VC-88
cadence-min-on-time command VC-87
cadence-variation command VC-88
Calculated Impairment Planning Factor (ICPIF)
overview VC-538
threshold, configuring VC-556
calendar set command FC-276
calendar system
See hardware clock
call agent
address, in MGCP configuration VC-182
in MGCP VoIP network VC-5, VC-179
third-party vendor VC-5, VC-180
call application command VC-268
call application voice command VC-492
callback
ARA
chat scripts DC-645
clients DC-645
asynchronous
configuring DC-641
overview DC-641
authentication DC-641
chat scripts DC-644
modem rest period, configuring DC-644
PPP
dial string DC-643
callback forced-wait command DC-643, DC-644, DC-645
Call Blocking on Caller ID
and Enhanced Voice Services for Japan VC-859
call clearing
gatekeeper VC-211
call deflection
configuring VC-240
H.450.3
description VC-228
call discriminator profile configuration mode, summary FC-408
called-number command VC-399
Caller ID
and Enhanced Voice Services for Japan VC-859
configuration tasks list VC-817
FXO voice ports
configuring VC-820
FXS voice ports
configuring VC-820
overview VC-813
prerequisites task list VC-816
caller ID
MGCP support of VC-182
caller-id alerting dsp-pre-alloc command VC-823
caller-id alerting line-reversal command VC-822
caller-id alerting pre-ring command VC-823
caller-id alerting ring command VC-822
caller-id attenuation command VC-818
caller-id block command VC-821
caller-id command VC-864, VC-866
caller-id enable command VC-820
call fallback active command VC-554
call fallback cache-size command VC-555
call fallback cache-timeout command VC-555
call fallback instantaneous-value-weight command VC-555
call fallback jitter-probe num-packets command VC-555
call fallback jitter-probe precedence commands VC-555
call fallback jitter-probe priority-queue command VC-555
call fallback key-chain command VC-554
call fallback map command VC-556
call fallback monitor command VC-554
call fallback probe-timeout command VC-555
call fallback threshold delay command VC-556
call fallback threshold icpif command VC-556
calling-number outbound command VC-82
calling-number outbound sequence command VC-83
calling X.121 address
disabling WC-276
enabling WC-276
insertion and removal (example) WC-329
call legs
default routes VC-141
calls
analog modem DC-4
analog robbed-bit signaling DC-262
asynchronous character steam TC-3
channel-associated signaling DC-262
circuit-switched digital DC-3
Cisco trunk (private-line) VC-423
incoming V.120 asynchronous DC-202
incoming voice
configuring modem for DC-270
ISDN not end-to-end DC-191
ISDN voice DC-180, DC-184, DC-199
outgoing access control DC-269, DC-371
permanent and switched, congestion monitoring of VC-535
preauthenticate incoming DC-728
prevent incoming DC-34
switched VC-534
(example) VC-567
switched voice
configuring VC-400
tandem switching VC-402
toll DC-642
X.3 PAD XOT, enabling TC-105
blocking
See ISDN PRI, class of restrictions
call setup, configuring SVCs for WC-29
call signaling VC-209
call termination VC-210
Call Tracker Plus ISDN and AAA Enhancements for the Cisco AS5300 and Cisco AS5800
MIB support FC-324
Call Tracker plus ISDN and AAA Enhancements for the Cisco AS5300 and Cisco AS5800 feature DC-83, DC-273
call tracking
AAA (authentication, authorization, and accounting) VC-264
call transfer VC-227
call transfer without consultation
H.450, configuring VC-246
call-type cas command DC-739
call-type cas digital command DC-752
call waiting, MGCP support of VC-182
candidate packet XC-256
CAPI (Common Application Programming Interface)
B-channel protocols supported DC-253
features DC-252
protocols supported DC-252
cap-list vfc command VC-875
capturing flows XC-142
CAR (Committed Access Rate) VC-170
CAR (committed access rate)
as a QoS building block XC-167
classification QC-26
policy examples QC-7
summary QC-7
configuration (example) QC-59
conform and exceed actions QC-57
for packet classification XC-114
ingress label switching router, using XC-172
IP Precedence, setting QC-244
MLS
restrictions XC-269
monitoring QC-59
multiple rate policies QC-208
overview QC-26
packet classification, methods QC-26
policies, configuring QC-57
policy requirements QC-58
rate-limit command action keywords QC-57
rate limits
average rate, defined QC-206
excess burst size, defined QC-206
extended burst size, defined QC-206
normal burst size, defined QC-206
overview QC-204
recommended burst sizes QC-207
summary QC-13
restrictions QC-209
traffic rate limitation QC-55
See also DCAR
card type command VC-73, VC-600
carrier protocol, tunneling IC-174
carrier wait time, dialer profiles DC-430
CAs (certification authorities)
authenticating SC-369
certificate revocation SC-364
configuration, saving SC-370
configuring (example) SC-374
declaring SC-367
(example) SC-374
description SC-361
domain names, configuring (example) SC-366, SC-374
host names SC-366
configuring (example) SC-374
identity, deleting SC-373
interoperability SC-332
IPSec, implementing SC-362to SC-364
LDAP support SC-367
NVRAM memory usage SC-365
prerequisites SC-361
public keys SC-369
purpose SC-361
restrictions SC-361
supported standards SC-360
URLs, specifying SC-367
See also certificates; CRLs; IPSec; RAs
CAS (channel-associated signaling)
(examples) DC-311
analog calls DC-262
channelized E1 DC-279
common forms of DC-281
CAS (channel-associated signalling) WC-90
CASA (Cisco Appliance Services architecture)
configuration mode, summary FC-396
cas-group command DC-286, DC-752
cas-group timeslots command DC-280
cause codes
See ISDN, cause codes
cautions
access lists SC-193
AppleTalk network address IC-179
authenticating keys SC-419
bridging
between dissimilar media BC-26
dissimilar media BC-96
duplicate bridge definition BC-85
extended access list BC-48
Cayman tunnel IC-179
enabling CEF/dCEF IC-48
FEIP2-DSW-2FX interfaces IC-34
GGSN charging transactions, disabling MWC-24
GTP (GPRS Tunneling Protocol), UDP checksum MWC-33
Java blocking SC-238
lock-and-key SC-194
microcode reload BC-626, BC-629
MTU caution IC-127
neighbor authentication SC-419
passwords, encrypting SC-405
port-channel interface IC-49
ppp, disabling with undefined list-name SC-51
SNASw interface, changing BC-548
STUN encapsulation, RSP BC-340
undefined AAA/TACACS+ list DC-598
Unicast RPF
BGP optional attributes SC-435
logging impact SC-433
virtual template interface erroneous routing DC-636
XID transmission BC-397
cautions, IP access lists IPC-89
Cayman encapsulation protocol IC-174
Cayman tunnel caution IC-179
CBAC (Context-based Access Control)
limitations
See also CBAC, restrictions
access lists
configuring SC-232
contents, displaying SC-242
how it works SC-224
application-layer protocols, configuring SC-237
audit trail SC-240
audit trail messages
(example) SC-249
enabling SC-246
authentication proxy compatibility SC-299
guidelines SC-241
verifying SC-242
viewing SC-242
denial-of-service attacks
detection SC-234
error messages SC-248
indications SC-236
disabling SC-250
error messages
audit trail SC-249
denial-of-service attacks SC-248
FTP attacks SC-249
Java blocking SC-249
SMTP attacks SC-248
firewall, configuring SC-241
FTP attacks, error messages SC-249
FTP traffic SC-229
H.323 inspection
configuring SC-237
multimedia support SC-227
half-open sessions SC-236
how it works SC-222
inspection rules
applying SC-240
viewing SC-242
interfaces
choosing SC-230
external, tips SC-234
internal, tips SC-234
intrusion detection SC-221
IP packet fragmentation SC-238
inspection SC-238
IPSec compatibility SC-229
Java
(caution) SC-238
inspection, configuring SC-238
messages SC-249
logging SC-240
memory usage SC-229
multimedia support protocol inspection SC-227
packet inspection SC-223
PAM operation SC-324
process SC-225
protocol support (table) SC-226
restrictions SC-229
See also CBAC limitations
RPC inspection, configuring SC-237
RTSP inspection SC-227
session information, viewing SC-242
SMTP attacks
error messages SC-248
state tables SC-224
TCP inspection, configuring SC-239
traffic filtering SC-220
UDP inspection, configuring SC-239
UDP sessions SC-224
when to use SC-225
CBR port
CES services
structured WC-88
unstructured WC-87
channel-associated signalling (CAS) WC-90
clear channel CES services WC-87
network timing WC-91
N x 64 CES services WC-88
CBWFQ (class-based WFQ)
average rate shaping, configuring QC-230
bandwidth allocation QC-90, QC-91
class queue packet limit, configuring QC-119, QC-364
configuration (example) QC-143
configuring QC-117
enabling QC-122, QC-139, QC-363
GTS, configuration (example) QC-230, QC-231
IP RTP Priority, configuration (example) QC-149
overview QC-89
peak rate shaping, configuring QC-230
policy maps QC-230
prerequisites QC-180
restrictions QC-91
service policies, attaching QC-363
strict priority queueing QC-94
VCs, CoS supported QC-363
See also class policies
ccm-manager command VC-188
ccm-manager redundant host command VC-188
ccm-manager switchback command VC-188
ccm-manager switchover-to-backup command VC-189
C code generic API for GKTMP
in a UNIX environment
gatekeeper VC-228
ccs connect command VC-647
ccs encap frf11 command VC-647
cd command FC-138
CDP (Cisco Discovery Protocol)
configuration task list FC-328
dialer mappings, using with IPC-198
disabling for routing device FC-329
enabling on an interface FC-329
monitoring and maintaining FC-330
ODR routing information IPC-196
ODR timers, relationship to IPC-197
reconvergence of IP routes IPC-197
timer IPC-197
TLVs FC-328
transmission timer and holdtime, setting FC-329
updates IPC-197
Version-2 (CDPv2) FC-327
cdp enable command FC-329, FC-330, IPC-196
cdp holdtime command FC-329
cdp run command FC-329, IPC-196
cdp timer command FC-329, IPC-197
CE (customer edge)
routing sessions XC-156, XC-157
CEBGP
assigning labels XC-113
function in sub-autonomous systems XC-112
CEF (Cisco Express Forwarding)
accounting XC-41
benefits XC-21
components
adjacency tables XC-22
FIB XC-22
configuration task list XC-37
distributed tunnel switching, configuring XC-44
FIB XC-37
Forwarding Agent, enabling IPC-115
function IPC-115
load balancing
per-destination, configuring XC-38
per-destination, disabling XC-39
per-packet, configuring XC-38
NetFlow policy routing XC-66
network accounting, configuring XC-41
operation modes
central CEF mode XC-24
distributed CEF mode XC-24
requirement XC-83
sample network topology (figure) XC-22
supported media XC-24
virtual profiling XC-36
CEF/dCEF enabling caution IC-48
CEF mode
(figure) XC-25
CELP (code excited linear prediction compression) IPC-425, QC-338
centralized service XC-98
central sites, protocol translation TC-154
certificate chain configuration mode FC-396
certificate chain configuration mode, enabling SC-372
certificate command SC-372
deleting SC-372
requests SC-369
resending SC-367
RSA key requirements SC-367
saving SC-366
storing SC-365
viewing SC-373
See also CAs; CRLs; RSA keys
CES (circuit emulation services)
ATM-CES port adapter
(example) WC-117
channel-associated signalling, configuring WC-90
clear channel WC-87
clocking WC-89
clocking priority (example) WC-117
configuring WC-87
N x 64 WC-88
structured services, configuring WC-88
unstructured services, configuring WC-87
ATM VC CES configuration mode FC-394
CES network module
(example) WC-115
CES configuration, verifying WC-86
channel-associated signalling, configuring WC-85
configuring WC-80
connection, activating WC-86
PVCs, configuring for CES WC-82
restrictions WC-81
structured services, configuring WC-84
SVCs, configuring for CES WC-83
unstructured services, configuring WC-84
clock
configuration (examples) VC-773
configuring VC-754
configuration mode, summary FC-396
on-hook detection WC-90
overview of WC-79
structured
configuring VC-756
virtual path shaping WC-92
(example) WC-117
ces aal1 clock command WC-88, WC-89
ces aal1 service command WC-88, WC-89
ces circuit cas command WC-91, WC-92
ces circuit cdv command WC-89
ces circuit command WC-88, WC-89
ces circuit on-hook-detection command WC-91
ces circuit timeslot command WC-89
ces-clock command VC-758
ces command VC-754
ces connect command VC-730
ces dsx1 clock command WC-88, WC-89
ces dsx1 framing command WC-89
ces dsx1 lbo command WC-89
ces dsx1 linemode command WC-89
ces dsx1 signalmode robbedbit command WC-91
ces initial-delay command VC-730
ces partial-fill command VC-730
ces pvc command WC-88, WC-90, WC-92
CGMP (Cisco Group Management Protocol)
See IP multicast routing, CGMP
change log inventory utility BC-584
channel-group command IC-49
channel interface tracking, CPA configuration BC-633
channelized E1
channel-associated signaling, analog calls DC-279
channel groups
(example) DC-303
interface loopbacks, troubleshooting DC-297, DC-298
serial interfaces DC-297
testing IC-172
channel uses DC-262
controllers, troubleshooting IC-170, IC-172
description DC-14
ISDN PRI
configuring DC-264
D-channel number DC-264
PRI groups (example) DC-303
R2 signaling DC-279
testing channel group IC-172
channelized T1
ANI/DNIS delimiters on incoming T1 trunk lines DC-281
channel groups
(example) DC-303
interface loopbacks, troubleshooting DC-297, DC-298
serial interfaces DC-297
channel uses DC-262
controllers, troubleshooting IC-171, IC-172
description DC-14
ISDN PRI
configuring DC-265
D-channel number DC-266
PRI groups (example) DC-303
switched 56K DC-282
See also switched 56K
voice channels, configuring DC-281
channelized T3
CT3IP, configuring IC-103
description of IC-103
interface processor IC-102, IC-103
See alsoT3
support for the Cisco AS5800
configuring IC-105
T3 configuration, verifying IC-114
typical CT3IP configuration (example) IC-150
channel-protocol command BC-632, BC-633
channel rates
See data rates
channels
ATM, configuring WC-51
ISDN 2 B + D
BRI DC-15
logical relationship DC-16
PRI DC-16
channel subsystem, configuring BC-619
CHAP (Challenge Handshake Authentication Protocol)
challenge TC-143
challenge packet DC-597
common password SC-52
delay authentication SC-53
enable authentication SC-50
enabling TC-143
encrypted password (examples) DC-621
PAP authentication order DC-598
refuse authentication requests SC-52
character data bits
current session, setting for the FC-87
character padding
setting for current session FC-83
setting globally FC-82
characters
display
width, changing FC-82
regular expression meaning, removing DC-864
character set
7-bit for standard U.S. characters FC-82
8-bit for special characters FC-81
international FC-81
charging gateways
See GGSN charging gateways
chat-script command DC-165, DC-643, DC-867
chat scripts
ARA (example) DC-645
asynchronous lines DC-369
configuring DC-164
escape sequences (table) DC-165
expect-send pairs (table) DC-166
large-scale dial-out DC-692
naming conventions DC-164
PPP callback, configuring DC-644
regular expression pattern matching in TC-205
regular expressions in DC-861
checksums
system image files, verifying FC-194
checksums, AppleTalk P2C-42
CICS (Customer Information Control System)
clients, setting up BC-593
CTRC feature BC-240
defining remote access to BC-579
host configuration BC-579to BC-583
LU termination BC-779
resource definition group BC-580
system initialization parameters BC-580
transient data queue BC-581
Universal Client BC-593
CID (session context identifier) VC-166
CIDR (classless interdomain routing)
aggregate routes, configuring IPC-303
benefit IPC-303
description IPC-286
CIP (channel interface processor)
benefits BC-613
Cisco IOS release support BC-244, BC-614
description BC-612
hardware logic, clearing BC-637
interface
number supported BC-244, BC-614
port numbers BC-631
restarting BC-637
shutting down BC-637
microcode image
saving BC-627
verification BC-630
overview BC-243
router platforms BC-244, BC-614
statistics, clearing BC-636
virtual port, number BC-244, BC-614
CIP-attached router definition BC-603
CIR (committed information rate) XC-223
circuit weight, DLSw+, adjusting BC-304
Cisco 1000 series LAN Extender
See also LAN Extender
Cisco 1000 series LAN Extender, description IC-60
Cisco 2500 series routers, low-speed serial interfaces IC-142
Cisco 2520-2523 routers
slow-speed serial interfaces, configuring DC-150
Cisco 2520 to Cisco 2523 routers
synchronous or asynchronous, setting IC-148
Cisco 2524 fractional T1/T1 service modules IC-134
CSU/DSU IC-134
Cisco 2525 fractional T1/T1 service modules IC-134
CSU/DSU IC-134
Cisco 2600 series routers
data compression AIM, PPP compression IC-91
digital voice, configuring on VC-59
MGCP platform VC-179
MGCP RGW configuration (example) VC-195
Cisco 3000 series routers, protocol translator (example) TC-152
Cisco 3600 series
software disaster recovery FC-202
Cisco 3600 series routers
digital voice, configuring on VC-59
supported MGCP platforms VC-179
Cisco 3660 routers
configuration (example) VC-193
Cisco 4000 series routers
FDDI, configuring IC-57
Cisco 6400 Universal Access Concentrator
edge LSR, disabling XC-137
MPLS LSC, using XC-117, XC-136
virtual trunks, creating XC-237
Cisco 700 and 800 series routers
Combinet Proprietary Protocol DC-268, DC-325
protocols supported DC-325
Cisco 7200-I/O-GE+E and Cisco 7200-I/O-2FE/E Input/Output Controllers IC-42
Cisco 7200 series routers
digital voice port adapters VC-62
MPLS LSC, using XC-117
virtual trunks, creating XC-234
Cisco 7500 MLP Inverse Multiplexer DC-618
Cisco 7500 series routers XC-167
digital voice port adapters VC-62
Cisco 800 series routers
analog telephone connections VC-51
Cisco AS5200 access servers
analog calls over E1, configuring DC-280
CAS on channelized E1, configuring DC-279
channelized E1/T1, channel uses DC-262
R1 modified signaling, configuring DC-294
Cisco AS5300 access servers
analog calls over E1, configuring DC-280
as MGCP TGW VC-182
busyout B channel DC-273
CAS on channelized E1, configuring DC-279
CAS on T1 voice channels, configuring DC-281
codec support VC-65
FGD-EANA signaling VC-82
MGCP configuration (example) VC-190
MGCP platform VC-179
R1 modified signaling, configuring DC-294
SGCP configuration (example) VC-191
voice/fax feature card VC-61
Cisco AS5800 access servers
busyout B channel DC-273
CAS on channelized E1, configuring DC-279
CAS on T1 voice channels, configuring DC-281
R1 modified signaling configuration (examples) DC-316
TCP Clear performance optimization DC-159
Cisco BPX series switches
multi-vc, configuring XC-233
supported XC-117
Cisco Cache Engines FC-373
Cisco CallManager, with MGCP VC-188
Cisco Catalyst 5000 series switches XC-445
Cisco Catalyst switches
in VLANs XC-319
Cisco Discovery Protocol FC-327
See also CDP
See CDP (Cisco Discovery Protocol)
Cisco Easy IP
address strategy DC-782
async interface configuration (examples) DC-480
business applications DC-782
configuring DC-476
dialer interfaces, configuring DC-478
dial strategy DC-782
dynamic NAT translation timeout period DC-479
ISDN BRI configuration (examples) DC-479
LAN interfaces, configuring DC-477
NAT
dialer interfaces, configuring DC-478
LAN interfaces, configuring DC-477
pool, configuring DC-477, DC-486
PPP/IPCP negotiation DC-478
prerequisites DC-476
WAN interfaces, configuring DC-477
Cisco hoot and holler over IP
combining with data networks VC-829
Cisco IGX series switches
supported XC-117
Cisco IOS
IOS File System FC-131
releases
displaying version number FC-177
software images
See system images
Cisco IOS DHCP client
benefits IPC-65
Ethernet interfaces, configuring on IPC-71
example IPC-76
Cisco IOS DHCP relay agent
overview IPC-65
unnumbered interfaces, support for IPC-65
Cisco IOS DHCP Server
address pool configuration (example) IPC-75
benefits IPC-64
boot file, specifying IPC-71
configuration task list IPC-66
database agent configuration (example) IPC-75
enabling IPC-66
lease, specifying IPC-71
manual bindings configuration (example) IPC-76
monitoring and maintaining IPC-73
overview IPC-63
ping
number of packets IPC-71
timeout value IPC-71
prerequisites IPC-65
Cisco IOS Firewall
authentication proxy SC-289
description SC-183
dynamic access lists SC-191
feature set SC-184
firewall solution SC-183
reflexive access lists SC-201
See also authentication proxy; CBAC; PAM; TCP intercept
TCP intercept SC-213
Cisco IOS Firewall IDS SC-269, SC-271
audit rule SC-272
configuration (examples) SC-284to SC-287
configuring, initializing, post office SC-279
event logging SC-270
monitoring and maintaining SC-283
performance impact SC-273
process SC-272
sensor SC-270
signature list SC-273to SC-278
signature types SC-273
threats, response to SC-270
usage scenarios SC-272
when to use SC-272
Cisco LightStream 100 ATM switches XC-379
LANE ATM address prefix XC-375
LANE ATM address prefix, configuring XC-378
LANE configuration server's ATM address on the Cisco LightStream 100 switches XC-377
software version, TR-LANE XC-374
Cisco LightStream 1010 ATM switches
LANE configuration server's ATM address on the Cisco LightStream 1010 switches XC-377
software version, TR-LANE XC-374
Cisco MC3810 concentrators
CAC master and slave VC-431
digital voice interface card VC-60
private-line calls on VC-423
subcell multiplexing VC-432
trunk permanent calls VC-439
VoATM configuration (example) VC-451
Cisco MICA Modem Dial Modifiers feature DC-66
Cisco RPM CLID/DNIS Call Discriminator feature DC-727
Cisco Secure IDS
See Cisco IOS Firewall IDS, compatibility
Cisco uBR924
MGCP configuration (example) VC-194
MGCP platform VC-179
Cisco VG200
as MGCP platform VC-179
configuration (example) VC-196
configuring with MGCP VC-188
Cisco Voice Gateway 200. See Cisco VG200
Cisco web browser user interface FC-117
class
premium XC-175
standard XC-175
class (policy-map) command QC-121, QC-138, QC-364
class-based packet marking
configuration (example) QC-67
configuring QC-63
prerequisites QC-29
restrictions QC-29
verifying QC-66
class-based shaping
buffers, configuring QC-230
configuring QC-229
feature description QC-215
class-based WFQ
See CBWFQ; DCBWFQ
class-bundle command QC-359
class command WC-174
bandwidth, modifying for a service policy QC-125
IP Precedence value, configuring QC-64
queue limit, modifying for service policy QC-126
traffic classes, configuring QC-75
traffic policies, configuring QC-188, QC-189
classification
BGP QC-7
defined QC-21
IP Precedence QC-22
methods QC-21
PBR QC-24
classifying
packets VC-167
IP Precedence VC-167
traffic VC-166
class-int command WC-41
class-map command
bandwidth, PQ, configuring QC-133
class-based shaping QC-229
class maps, defining QC-118
class policies, configuring QC-136
GTS QC-230
WRED QC-191
class maps
configuration (example) QC-144
configuring QC-118
match criteria, configuring QC-118, QC-136
class maps, configuring XC-171
class policies
bandwidth, configuring QC-125
CBWFQ, configuring QC-90
default class, configuring QC-121, QC-138, QC-364
information, displaying QC-124, QC-139, QC-230
LLQ priority queue, configuring QC-137
queue packet limit, configuring QC-123, QC-126
tail drop, configuring QC-119
WRED packet drop, configuring QC-120, QC-188
class-vc command QC-361, WC-26, WC-37, WC-41
CLAW (Common Link Access to Workstation)
CMPC+ support BC-728
configuration
guidelines BC-651
host, router correlation BC-662to BC-663
fast switching configuration BC-655
ICMP flows, disabling BC-655
IP address configuration BC-654
IP host backup configuration BC-661, BC-662
maintaining BC-663
maximum connections BC-651
monitoring BC-663
packing
(example) BC-665
feature BC-652
subchannel
guidelines BC-651
claw command BC-620, BC-653, BC-661, BC-662
clear access-list counters command IPC-118
clear access-template command SC-199
clear appletalk arp command P2C-54
clear appletalk neighbor command P2C-54
clear appletalk route command P2C-54
clear appletalk traffic command P2C-54
clear arp-cache command IPC-47
clear bridge command BC-59
clear bridge multicast command BC-59
clear call fallback cache command VC-555
clear cdp counters command FC-330
clear cdp table command FC-330
clear cef linecard command XC-48
clear-channel codec
configuring T-CCS for VC-647
clear clns cache command P3C-96
clear clns neighbors command P3C-96
clear clns route command P3C-96
clear controller lex command IC-69
clear counters command BC-636, BC-639
clear crypto isakmp command SC-396
clear crypto sa command SC-357
clear dbconn connection command BC-598
clear decnet counters command P3C-53
clear dialer command DC-380, DC-410, DC-448
clear dialer sessions command DC-686
clear dlsw circuit command BC-311
clear drip command BC-153, BC-181
clear drip counters command BC-153
clear dsip tracing command DC-115
clear extended counters channel command BC-636, BC-711, BC-759
clear frame-relay-inarp command WC-206
clear gprs charging cdr command MWC-53
clear gprs gtp statistics command MWC-53
clear gprs isgsn statistics command MWC-53
clear gtp pdp-context command MWC-53
clear host command IPC-47
clear interface command BC-637
clear interface tokenring command IC-72
clear interface virtual-access command DC-486, TC-145
clear ip accounting command IPC-118
clear ip bgp command IPC-291
clear ip bgp dampening command IPC-323
clear ip bgp flap-statistics command IPC-322
clear ip bgp peer-group command IPC-323
clear ip cef inconsistency command XC-48
clear ip cgmp command IPC-440
clear ip dhcp binding command IPC-73
clear ip dhcp conflict command IPC-73
clear ip dhcp server statistics command IPC-74
clear ip drp command IPC-118
clear ip eigrp neighbors command IPC-272
clear ip flow stats command XC-72
clear ip igmp group command IPC-440
clear ip mds forwarding command XC-2
clear ip mobile traffic command IPC-170
clear ip mrm status-report command IPC-517
clear ip mroute command IPC-440
clear ip msdp peer command IPC-481
clear ip msdp sa-cache command IPC-481
clear ip msdp statistics command IPC-481
clear ip nat translation command IPC-46
clear ip nhrp command IPC-49, P2C-157
clear ip ospf command IPC-241
clear ip pgm host command IPC-493
clear ip pgm router command IPC-494
clear ip pim auto-rp command IPC-440
clear ip pim interface count command XC-2
clear ip route command IPC-47, IPC-373
clear ip route dhcp command IPC-74
clear ip route download command DC-686
clear ip rtp header-compression command IPC-440
clear ip sap command IPC-440
clear ipx accounting command P2C-157
clear ipx cache command P2C-154
clear ipx nlsp neighbors command P2C-156
clear ipx route command P2C-154
clear ipx traffic command P2C-154
clear l2relay statistics command MWC-53
clear l2relay topology-map command MWC-53
clear line command DC-41
clear logging command FC-289
clear mgcp statistics command VC-189
clear modem at-mode command DC-67
clear mpoa client cache command XC-447
clear mpoa server cache command XC-454
clear ncia circuit command BC-486
clear ncia client command BC-486
clear ncia client registered command BC-486
clear netbios-cache command BC-121
clear parser cache command FC-165
clear port log command DC-129
clear resource-pool command DC-754
clear rif-cache command BC-121
clear smrp mcache command P2C-54
clear snapshot quiet-time command DC-448
clear source-bridge command BC-121
clear spe counters command DC-129
clear spe log command DC-129
clear sse command BC-59, BC-121
clear tarp counters command P3C-102
clear tarp ldb-table command P3C-102
clear tarp tid-table command P3C-103
clear tcp command FC-96
clear tcp statistics command IPC-118
clear txconn connection command BC-597
clear txconn transaction command BC-597
clear vfc command VC-871, VC-872
clear vines cache command P3C-26
clear vines ipc command P3C-26
clear vines neighbor command P3C-26
clear vines route command P3C-26
clear vines traffic command P3C-26
clear vlan statistics command BC-59, BC-153
clear vpdn tunnel command DC-540
clear x25 command WC-315, WC-319
clear xot command WC-319
CLI (command-line interface)
description FC-9
parser FC-165
client/server, X Window System TC-51
client-atm-address name command XC-384
client command IPC-144
client hardware address, specifying IPC-71
client-identifier command IPC-70
client-initiated VPNs DC-509
client ip command BC-824
client ip lu command BC-800, BC-819
client ip pool command BC-800, BC-810, BC-819
client lu maximum command BC-802, BC-809
client-name command IPC-70
client printer ip lu command BC-819
client router
TFTP service, configuring FC-246
(example) FC-246
clients
CICS BC-593
COMTI BC-597
DB2 BC-593
gateways VC-367
IBM Universal BC-593
phones VC-367
SIP VC-367
TXSeries clients BC-594
virtual terminals, installing BC-582
CLNP (Connectionless Network Protocol) ISO documentation P3C-4
CLNS
See ISO CLNS
clns access-group command P3C-87
clns adjacency-filter command P3C-87
clns cluster-alias command P3C-41, P3C-92
clns configuration-time command P3C-91
clns congestion-threshold command P3C-95
clns dec-compatible command P3C-92
clns enable command P3C-83
clns erpdu-interval command P3C-95
clns esct-time command P3C-91
clns es-neighbor command P3C-85
clns filter-expr command P3C-87
clns filter-set command DC-359, P3C-87
clns holding-time command P3C-91
clns host command P3C-86
clns is-neighbor command P3C-85
clns mtu command P3C-94
clns net command P3C-83
clns packet-lifetime command P3C-96
clns rdpdu-interval command P3C-95
clns route-cache command P3C-94, XC-17
clns route command P3C-83, P3C-84
clns route default command P3C-84
clns router iso-igrp command P3C-70
clns routing command P3C-83
clns security pass-through command P3C-92
clns send-erpdu command P3C-95
clns send-rdpdu command P3C-95
clns split-horizon command P3C-72
clns template-alias command P3C-87
clns want-erpdu command P3C-96
clock calendar-valid command FC-276
clock rate command BC-426, FC-53, FC-54
clock rate line command VC-804
clock rate network-clock command VC-725, VC-729, VC-798
clock rate network command VC-737
clock read-calendar command FC-276
clocks
internal, enabling IC-99
setting FC-264
signal, inverting IC-99
See also system clock
clock-select command VC-754
clock set command FC-275
clock source
service modules, 2- and 4-wire CSU/DSU IC-139
clock source, configuring for ATM WC-91
clock source command DC-280, DC-286, IC-102, IC-106, IC-128, VC-74, VC-733, VC-734, VC-755, VC-756, VC-797, VC-801
clock summer-time command FC-275
clock ticks, IPX P2C-140
clock timezone command FC-274
clock update-calendar command FC-277
cloning
virtual access interfaces DC-484
virtual profiles DC-491
closed user groups XC-98
closed user groups (CUGs), X.25 WC-303
clp-bit command WC-235
cluster
LU pool allocation BC-778
TN3270 server
description BC-775
cluster aliases, DECnet P3C-91
CMCC (Cisco Mainframe Channel Connection) adapter
channel interface tracking, CPA configuration BC-633
channel software BC-242, BC-612
CLAW configuration BC-641to BC-671
CMPC+ configuration BC-727to BC-765
CMPC configuration BC-673to BC-726
comparison (table) BC-614
configuration
device argument BC-622to BC-624
guidelines BC-616
core dump BC-638
CSNA configuration BC-673to BC-726
data rate configuration BC-632
description BC-611
environments supported BC-245, BC-615
FEP alternative BC-247, BC-674
hardware
description BC-242
logic, clearing BC-637
IBM 3172
offload BC-642
interface
clearing BC-636
monitoring BC-633to BC-636, BC-637
port types BC-631
restarting BC-637
selecting BC-631
shutting down BC-637
status verification BC-638
IP address configuration BC-654, BC-659, BC-739
IP host backup configuration BC-641to BC-671
loopback BC-638
microcode image
reloading
verification BC-630
RSP, Flash memory BC-626
SNA environment features BC-247
SNA-to-IP integration BC-7
TCP/IP environment features BC-245
TCP/IP offload configuration BC-641to BC-671
TN3270 server configuration BC-767to BC-840
troubleshooting BC-638
CMCC internal adapters
configuration
CSNA BC-678
port BC-678
SAP guidelines BC-616to BC-618, BC-678
CSNA configuration BC-682
LLC option configuration BC-683
SAP
limit BC-616
reserved values BC-616
CMCC internal LANs
configuration
CMPC BC-693
CSNA BC-677
CSNA configuration BC-682
CMNS (Connection Mode Network Service)
address map (example) WC-332
configuring WC-302
enabling WC-302
LLC2
connections, displaying WC-319
support WC-301
local X.25 routing on nonserial media WC-16, WC-301
on leased lines (example) WC-334
over a public data network (example) WC-332
switching (example) WC-332
traffic statistics, displaying WC-319
X.25 route, configuring WC-302
cmns enable command WC-302
CMPC (Cisco Multipath Channel)
See also CMPC+
APPN node support BC-248
channel
host verification BC-705
router verification BC-704to BC-705
troubleshooting BC-706
CMPC+ support BC-728
configuration
(examples) BC-715to BC-726, BC-838
description BC-692
enabling BC-700
host, router correlation BC-701
SAP BC-693
internal adapter configuration BC-698
internal LAN configuration BC-698
link
See transmission group
LLC option configuration BC-699
local SNA major node configuration BC-695
SRB configuration BC-700
subchannel
configuration BC-696
guidelines BC-693
TN3270 server DLUR support BC-248, BC-675
transmission group
(figure) BC-694
configuration BC-697
guidelines BC-693
TRL configuration BC-695
VTAM
host verification BC-706to BC-707
router verification BC-708
troubleshooting BC-709
CMPC+ (Cisco Multipath Channel+)
benefits BC-733
configuration
description BC-736
guidelines BC-736
host, router correlation BC-742
HSAS stack verification BC-751to BC-756
requirements BC-734
TCP/IP stack verification BC-743to BC-749
troubleshooting, HSAS BC-757
troubleshooting, TCP/IP stack BC-750to BC-751
data flow BC-729
IP address configuration BC-739
MPC+ group, number supported BC-246, BC-728
platforms supported BC-734
subchannel
configuration BC-740
guidelines BC-736
TCP/IP stack (example) BC-759to BC-761
transmission group
configuration BC-741
guidelines BC-736
maximum BC-736
cmpc command BC-620, BC-696, BC-740
CMT (connection management) IC-51
FDDI process IC-51
microcode, disabling IC-56
cmt connect command IC-56
cmt disconnect command IC-56
cnfrsrc command XC-140
codec
negotiation, description VC-225
supported VC-225
codec (dial-peer) command VC-397, VC-434
codec aal2 profile command VC-436
codec command VC-66, VC-272, VC-818, VC-841, VC-880
codec complexity command VC-46, VC-64, VC-844
codec preference command VC-276
codec selection order, configuring VC-132
cold restarts FC-432
Columbia AppleTalk Package (CAP) P2C-33
Combinet
See Cisco 700 and 800 series routers
comfort-noise command VC-92
command aliases
creating FC-260
command control language scripts
See ARA, security
command history
buffer size FC-23
commands
recalling FC-24
description FC-23
disabling FC-24
command lines
redisplaying FC-27
command line-wrap feature FC-27
command modes
configuration modes
dedicated network interfaces, configuring DC-152
global configuration FC-13to FC-14, FC-151
interactive sessions, configuring DC-152
interface configuration FC-14to FC-15, FC-401
ROM monitor FC-16, FC-236to FC-237
router configuration FC-409
subinterface configuration FC-15, FC-413
summary table FC-17
commands
abbreviating FC-19
aliases, creating FC-260
completion help FC-25
execution FC-13
command syntax help
See context-sensitive help
comments
adding to configuration files FC-151
communication
between hosts XC-97
Communication Definition (example) BC-596
communication parameters
terminal FC-87
communities attribute IPC-304
community display format, specifying IPC-306
community list, creating IPC-305
community path attribute IPC-305
community string
defining FC-313
compand-type command VC-78
compiled access lists, displaying IPC-118
complete sequence number PDU
IS-IS for CLNS, configuring P3C-76
components
IPX MLS XC-264
MLSP XC-264
MLS-SE XC-264
NFCC 1
MSL-RP XC-264
compress command DC-602
compression
cRTP VC-165
HDLC IC-90
compressions
CID (session context identifier) VC-166
cRTP VC-166
distributed IC-89
Frame Relay WC-202
hardware IC-89
LAPB WC-261
Microsoft PPP DC-601
MLP DC-199
PPP IC-89
predictor (example) DC-198
show pas caim stats, using IC-97
software IC-89
Stacker (example) DC-198
TCP/IP header WC-202
X.25
payload WC-284
TCP/IP header WC-283
compress predictor command DC-600, WC-261
compress stac command DC-601, IC-90
compulsory tunneling
See NAS-initiated VPNs
COMTI clients BC-597
concentrator port
enabling IC-74
monitoring IC-74
concurrent routing and bridging BC-37
Apollo Domain P3C-9
ISO CLNS P3C-67
VINES P3C-18
XNS P3C-124
conditional default origination
IS-IS IPC-280
OSPF
description IPC-231
Conditionally Triggered Debugging
description FC-300
protocol specific FC-301
condition command VC-81
condition signalling
BECN WC-215
Router ForeSight WC-215
confederations
definition XC-107
EBGP routing, configuring XC-164
function XC-112
CONFIG_FILE environment variable FC-233
specifying FC-171
config-isakmp command mode, enabling SC-385
ConfigMaker FC-69
config-register command FC-198, FC-201, FC-202, FC-230, FC-438
configuration
network clocks (Cisco MC3810), synchronizing VC-793
synchronizing network clocks (Cisco MC3810)
hierarchy of clock sources VC-807
obtaining clock from network VC-795
using the internal clock VC-806
voice ports
troubleshooting tips VC-599
configuration commands
clearing FC-170
loading from the network FC-164
configuration files
(example) FC-282
clearing FC-170
compressing FC-162
CONFIG_FILE environment variable FC-171
copying
between Flash memory devices FC-167
(example) 1
from a network server FC-157, FC-169
from an rcp server FC-158
from a TFTP server FC-158
from Flash memory FC-167
to a network server FC-153
to an rcp server FC-153
to a TFTP server FC-153
copying to an rcp server FC-192
displaying
active FC-151
CONFIG_FILE environment variable FC-151, FC-229
information FC-151
downloading FC-173
(example) FC-176
host configuration files FC-175
network configuration files FC-174
failing to load FC-174
host
See host configuration file
improving load time FC-165
larger than NVRAM FC-162
loading from the network FC-164
location FC-150
modifying FC-151
network
See network configuration file
See also running configuration
startup
specifying FC-171
See also startup configuration
storing in Flash memory FC-163
types FC-149
configuration modes
summary list FC-390
configuration register
ROM monitor mode FC-229
setting using Setup FC-62
See also configuration register boot field
configuration register boot field
bits FC-230
how routing device uses FC-230
listing value FC-231
configurations, saving SC-370
configure command BC-627
configured inbound soft reset (BGP) IPC-292
configured resets (BGP) IPC-292
configured static routes, displaying WC-207
configure terminal command FC-13, FC-152
configuring
DSNs VC-702
ECM VC-704
fax cover page VC-698
faxed header VC-697
gateway security VC-699
off-ramp VC-700
on-ramp VC-699
TCL application VC-701
interface type for fax calls VC-705
IVR functionality VC-705
MDNs VC-701
MMoIP dial peers VC-693
off-ramp ACLs VC-673
off-ramp gateway VC-695
on-ramp modem pooling VC-704
store and forward fax VC-703
t.37/t.38 fax gateway VC-704
t.38 fax relay for VoIP H.323 VC-707
conform actions VC-170
congestion avoidance
defined QC-171
flow-based WRED QC-181
global synchronization QC-172
IP to ATM CoS QC-352
MPLS QoS XC-170
RED QC-172
summary QC-11
tail drop QC-171
TCP
flow control VC-171
WRED QC-175
congestion management
defined QC-79
IP to ATM CoS QC-352
MPLS QoS XC-114
queueing
CQ QC-80
FIFO QC-79
PQ QC-80
WFQ QC-79
summary QC-8
uses QC-80
congestion management and Frame Relay switching
(examples) WC-223
overview of WC-180
congestion threshold
DECnet P3C-52
ISO CLNS P3C-95
connect (FRF.5) command WC-235
connect (FRF.8) command WC-238
connection command VC-817, VC-841
connection control timer, configuring WC-38
connectionless
architecture XC-98
IP environment XC-97
network XC-98
service XC-97
Connectionless Network Service
See ISO CLNS
connection-oriented overlay XC-97
connection plar command VC-547
connection plar-opx command VC-535
connection routing software XC-124
connections
ARA AppleTalk network TC-77
ATM virtual XC-98
automatic baud rate detection FC-87
diagnosing FC-288
escaping from FC-93
FTP FC-255
full duplex TC-18
idle FC-279
IPX dial-out TC-91
LAT, host-initiated TC-27, TC-29
LLC2 NetBEUI clients over PPP DC-583
meshed XC-98
naming FC-93
NASI TC-91
PBX to WAN VC-36
PBX without M-lead response VC-80
permanent point-to-point voice VC-535
PPP DC-582
printers
configuration (example) DC-157
configuring DC-34
private XC-98
protocol translations, monitoring TC-146
quiet asynchronous tunnel TC-19
refusing full duplex FC-79
resuming with a menu FC-107
resuming X.3 (examples) TC-111
reverse modem DC-34
rlogin TC-19
rotary groups DC-147
semipermanent ISDN
BRI DC-189
Germany, Australia DC-194
semipermanent ISDN PRI DC-269
simulated permanent tie-line between two PBXs VC-534, VC-550
SLIP DC-583
switching FC-93
TCP
connection attempt time, configuring DC-585
TCP, monitoring TC-20
TN3270 TC-47
transport protocol, selecting TC-9
trunk
(example) VC-568
configuring VC-546
voice, verifying VC-440
voice port to PSTN VC-36
voice port to WAN VC-36
X.28 PAD TC-95
X.3 PAD EXEC mode TC-96
connection tie-line command VC-535
connection trunk command VC-439, VC-535
console
displaying debug messages FC-88
constrained multicast flooding
enabling BC-58
multicast state information
clearing BC-59
displaying BC-59
ContentFlow Architecture
benefits IPC-114
Flow Delivery Agent IPC-115
MNLB Forwarding Agent IPC-115
related technologies IPC-115
content hosting XC-98
context-sensitive help
(example) FC-19
command syntax help FC-19
syntax checking FC-35
user-level commands FC-21
word help FC-19
continue command FC-240
Controlled Load Service
peak rate limit QC-296
RSVP-ATM QoS Interworking QC-249
controller command VC-726, VC-727, VC-733, VC-734, VC-754, VC-756, VC-797
controller configuration mode
summary FC-397
controller e1 command DC-264, DC-280
controllers
E1, description DC-13
T1, description DC-13
controller T1 command VC-598
controller t1 command DC-265, DC-285
controller t1 command, in MGCP VC-184, VC-186
controller t3 command IC-106
conversion, data BC-587
COPS (Common Open Policy Service), used with RSVP
feature description QC-252
verifying QC-305
copy command BC-627, FC-172, FC-195, FC-435, FC-436, FC-438
running-config startup-config command XC-161, XC-163
copy flash lex command IC-69
copy flash rcp command FC-182
copy flash tftp command FC-180
copy flash vfc command VC-871, VC-872, VC-873
copy nvram: command FC-146
copy process
output FC-178
terminating FC-180
copy rcp command FC-169
copy rcp running-config command FC-159, FC-161, FC-191, FC-193
copy rcp startup-config command FC-159, FC-161
copy running-config rcp command FC-155, FC-157, FC-164, FC-184
copy running-config startup-config command FC-233
copy running-config tftp command FC-153, FC-164
copy startup-config command FC-163
copy startup-config rcp command FC-155, FC-157
copy startup-config tftp command FC-153
copy system: command FC-147
copy tftp command FC-170
copy tftp file_id command FC-188, FC-207
copy tftp flash command FC-188, FC-207, FC-217
copy tftp lex command IC-69
copy tftp running-config command FC-158
copy tftp startup-config command FC-158
copy tftp vfc command VC-871, VC-872, VC-873
copy xmodem flash command FC-202
copy ymodem flash command FC-202
COR
See ISDN, PRI, Class of Restrictions VC-148
core dump
capture using FTP (example) FC-255
corlist incoming command VC-149
corlist outgoing command VC-148
CoS (class of service)
enabling BC-264
SNA traffic prioritizing BC-264
CoS (class of service), defining classes QC-22
cos-map function XC-175
cost
DECnet
interarea routing P3C-44
interfaces, assigning to P3C-36
intra-area routing P3C-43
counters
DECnet, clearing P3C-53
CPA (channel port adapter)
benefits BC-613
Cisco IOS release support BC-244, BC-614
description BC-613
hardware logic, clearing BC-637
interface
monitoring BC-637
number supported BC-244, BC-614
port number BC-631
restarting BC-637
shutting down BC-637
microcode image
saving BC-629
verification BC-630
overview BC-243
router platforms BC-244, BC-611, BC-614
statistics, clearing BC-636
virtual port, number BC-244, BC-614
CPE (Customer Premise Equipment), central configuration BC-499
cptone command VC-49, VC-78, VC-818
CQ (custom queueing)
bandwidth allocation QC-109
behavior QC-106
byte count QC-108
configuration (example) QC-162
configuring QC-159
considerations QC-110
default priority, assigning QC-161
how it works (figure) QC-107
output queues QC-106
overview QC-106
window size QC-109
CR (carriage return) FC-20
crash information
gathering FC-295
CRB (concurrent routing and bridging) P2C-16
CRC (cyclic redundancy check)
32 bits, enabling IC-98
configuring IC-98
crc4 command IC-102
crc command IC-98
crl optional command SC-368
crl query command SC-368, SC-371
CRLs (certificate revocation lists)
missing SC-368
requesting SC-370
saving SC-366
storing SC-365
cross-connect command VC-727
CrossTalk
files, downloading FC-80
CRTP (Compressed Real-Time Protocol)
configuring QC-337
overview QC-316
summary QC-16
crypto ca authenticate command SC-369, VC-508
crypto ca certificate chain command SC-372
crypto ca certificate query command SC-366
crypto ca crl request command SC-371
crypto ca enroll command SC-370
crypto ca identity command SC-367, SC-373
crypto ca trusted-root command SC-368
crypto dynamic-map command SC-354, SC-395
crypto ipsec security-association lifetime command SC-341
crypto ipsec transform-set command MWC-43, SC-347
crypto isakmp enable command SC-382, SC-385
crypto isakmp identity command SC-387
crypto isakmp key command MWC-43, SC-389
crypto isakmp policy command FC-425, MWC-41
crypto key generate rsa command SC-367, SC-387
crypto key identity command VC-507
crypto key pubkey-chain rsa command SC-372, SC-388
crypto key zeroize rsa VC-507
crypto key zeroize rsa command SC-371
crypto map client authentication list command SC-393
crypto map command MWC-44, QC-70, SC-351, SC-352
crypto map configuration, viewing SC-396
crypto map configuration mode
summary FC-397
crypto map isakmp authorization list command SC-391
crypto transform configuration mode
description FC-397
CSNA (Cisco SNA)
channel
host verification BC-689
router verification BC-688to BC-689
troubleshooting BC-689to BC-690
CMPC+ support BC-728
configuration
description BC-677
enabling BC-685
host, router correlation BC-686
host tasks BC-678
router tasks BC-680
SAP BC-678
internal adapter configuration BC-682
internal LAN configuration BC-682
internetworking BC-1
routing information BC-678
SRB configuration BC-684to BC-685
subchannel configuration BC-681
supported devices BC-247, BC-674
VTAM
host verification BC-690to BC-691
router verification BC-691
troubleshooting BC-692
XCA major node (example) BC-679
csna command BC-620, BC-681, BC-688
CSNP (complete sequence number PDU)
See also NLSP
CSNP (complete sequence number PDU) interval, IS-IS, configuring IPC-276
CSNP interval
IS-IS for CLNS, configuring P3C-76
CSU/DSU (channel service unit/digital service unit)
Cisco 2524 IC-134
Cisco 2525 IC-134
CSU/DSU and Frame Relay connections WC-158
CSU loopbacks
AT&T specification DC-298
latched DC-298
CT3, software configuration verification IC-114
CTRC (Cisco Transaction Connection)
CICS
host, configuring BC-579, BC-583
server, configuring BC-587
support BC-240
configuration BC-576
verification BC-592
DB2 support BC-241
description BC-240
destination configuration BC-587
installing APPC connections BC-581
license configuration BC-589
maintaining BC-597
monitoring BC-597
route configuration BC-588
router, licensing for BC-575
server
CICS (examples) BC-605, BC-608
CICS configuration BC-587
DB2 (examples) BC-600to BC-607
DB2 configuration BC-588
SNASw configuration BC-589
Ctrl-] command FC-96
Ctrl-C command FC-95
Ctrl-Z command FC-95
CTunnel (IP over a CLNS Tunnel)
configuration, monitoring and maintaining P3C-104
configuring P3C-103
CTunnel (IP over CLNS Tunnel)
destination, setting IC-181
IP, configuring IC-181
verifying IC-181
ctunnel destination command IC-181, P3C-103
CUD (Call User Data)
(example) WC-324
default protocol on virtual circuit WC-276
in X.25 Call Request packet WC-276
CUGs (closed user groups)
See X.25, CUGs
current configuration
viewing FC-147
cursor, moving at the command line FC-25
customer profile configuration mode, summary FC-408
customer profiles
See profiles, RPM
custom queueing, X.25 WC-302
custom-queue-list command QC-160
D
dail-peer voice command VC-693
DAS (dual attach stations), FDDI IC-50
data, inverting IC-99
data authentication SC-335
Database Connection
StarSQL applications BC-241, BC-575
Database Server Name for data source BC-584
data bits
changing character FC-87
data bits, configuring TC-12
data-character-bits command FC-82
data compression, modem negotiation DC-67, DC-145
data compression AIM for the Cisco 2600 series routers
data compression AIM, configuring IC-90
Frame-Relay map compression
configuring IC-92
verifying IC-93
Frame-Relay payload compression
configuring IC-95
PPP compression, configuring IC-91
PPP compression, verifying IC-91
data conferencing, multimedia and H.323 standard VC-5
data confidentiality SC-336
data conversion BC-587
data encryption
MLS
restrictions XC-269
Data Exchange Interface
See DXI 3.2
data flow SC-336
data flow, CMPC+ BC-729
data flow control
setting FC-86
datagram transport
LAPB WC-15
X.25
configuring WC-277
description WC-15
data hosting network commerce XC-97
data-link controls
DSPU configuration BC-517
SNA Service Point configuration BC-527
data packet acknowledgment, enabling WC-286
data rates
CMCC adapter, parallel channel interface BC-632
host configuration, control unit statement BC-633
data service unit
See DSU
daylight savings time
configuring FC-274
DB2 (Data Base 2)
APPL statement for BC-583
clients, setting up BC-593
CTRC feature BC-241
CTRC monitoring commands BC-598
DDF record in BSDS BC-583
LUNAMES (table) BC-585
Universal Server
AIX BC-577
HP-UX BC-577
OS/2 BC-577
SCO OpenServer BC-577
Solaris BC-577
UNIX BC-577
Windows 95 BC-577
Windows NT BC-577
VSE BC-241
DB2 Universal Server
AIX BC-241
HP-UX BC-241
OS/2 BC-241
SCO OpenServer BC-241
Solaris BC-241
UNIX BC-241
Windows 95 BC-241
Windows NT BC-241
dbconn ping command BC-598
dbconn server command BC-588
dbconn tcpserver command BC-588
D-bit, X.25 WC-268, WC-287, WC-289
DCAR (Distributed CAR)
class-based policy, configuring QC-58
configuration (example) QC-59
monitoring QC-59
platform support QC-26
restrictions QC-209
See also CAR
DCBWFQ (distributed class-based WFQ)
benefits QC-92
configuration (example) QC-147
configuring QC-125
description QC-91
prerequisites QC-93
restrictions QC-93
RSVP interaction QC-92
DCE
configuration (figure) WC-218
configuring (example) WC-218
DDN X.25 encapsulation WC-314
Frame Relay devices WC-178
use in LAPB WC-260
X.25
rules for initiating calls on WC-267
virtual circuit range on WC-267
dCEF (distributed CEF)
description XC-9
disabling XC-38
distributed tunnel switching, configuring XC-44
enabling XC-38
IPC, using XC-26
load balancing, disabling XC-39, XC-40
mode XC-26
mode (figure) XC-26
NetFlow policy routing XC-66
dce-terminal-timing enable command IC-101
DDDLU (dynamic definition of dependent LU), LU names BC-771, BC-773
DDF (distributed data facility)
installation panel BC-584
starting BC-584
DDN X.25
address conventions (figure) WC-313
address conversion scheme WC-313
configuration (example) WC-339
enabling WC-314
encapsulation types WC-314
IP address conventions (figure) WC-313
mapping algorithm WC-312
standard service WC-16, WC-312, WC-314
type of service (TOS) field WC-314
DDP (Datagram Delivery Protocol) P2C-2
DDR (dial-on-demand routing)
access lists
dialer groups DC-360
routed protocols, configuring DC-356
AppleTalk P2C-52
(example) P2C-76
AppleTalk, configuring DC-357
bridged protocols DC-353, DC-367
chat scripts
configuring DC-163
enabling DC-169
configuration (examples) DC-360to DC-363
decision flowchart DC-349
DECnet
configuring DC-358
control packets DC-358, DC-373
dependent implementation decisions DC-352
dialer profiles
virtual profile interoperation, configuring DC-490
independent implementation decisions DC-351
interesting packets DC-371
interfaces DC-353, DC-354, DC-368, DC-396
IP, configuring DC-356, DC-370
IPX
generation of packets, disabling P2C-121
spoofing P2C-121
watchdog packets P2C-120
IPX, configuring DC-357
ISDN PRI configuration (example) DC-300
ISO CLNS, configuring DC-359
large-scale dial-out DC-675
protocol bridging and routing BC-33
routed protocols DC-353, DC-355, DC-367, DC-370
snapshot routing DC-445
See also snapshot routing
SPX
spoofing P2C-121
watchdog packets P2C-121
transparent bridging DC-354
access, controlling BC-34
bridging protocol, defining BC-33
Ethernet type code, access (example) BC-75
interface configuration BC-34
permit all bridge packets BC-34
permit all packets DC-355
protocol access (example) BC-75
type code access BC-34, DC-355
uninteresting packets DC-371
VINES, configuring DC-358
XNS, configuring DC-359
See also dialer profiles; legacy DDR
DDR (dial-on-demand routing), CDP packets IPC-198
DDS mode
service modules, 2- and 4-wire CSU/DSU IC-141
DE (discard eligible) bit WC-205
DE (discard eligible) lists, traffic shaping QC-212
debit card
audio filenaming convention VC-490
call flow VC-482
configuration examples VC-494
configuration tasks list VC-492
H.323 accounting VC-487
index files
creating VC-490
overview VC-479
prerequisite tasks list VC-491
RADIUS accounting VC-487
debit card call flow VC-482
de-bit map-clp command WC-235
debug aaa authorization command DC-704, DC-756, DC-763
debug aaa command FC-301
debug aaa per-user command DC-499, DC-704, DC-734
debug async async-queue command DC-149
debug async command DC-41
debug atm bundle errors command QC-362
debug atm bundle events command QC-362
debug channel events command BC-688, BC-704
debug command output
displaying on terminal FC-88
debug commands
description FC-299
listing FC-300
debug condition command FC-302
debug crypto isakmp command SC-396
debug csm command DC-759
debug dbconn all command BC-598
debug dbconn appc command BC-598
debug dbconn config command BC-598
debug dbconn drda command BC-598
debug dbconn event command BC-598
debug dbconn tcp command BC-598
debug dialer command DC-196, DC-276, DC-326, DC-499, DC-550, FC-301
debug domain command WC-300
debug eigrp packet stub command IPC-273
debug frame-relay switching command WC-183
debugging
system FC-299
debugging, in MGCP VC-189
debug ip dhcp server command IPC-74
debug ip icmp command IPC-119
debug ip inspect command SC-246
debug ip mbgp updates command IPC-352
debug ip mobile advertise command IPC-170
debug ip mobile host command IPC-170
debug ip msdp resets command IPC-481
debug ip pgm host command IPC-493
debug ip rgmp command IPC-525
debug ip tcp transactions command DC-149
debug isdn command FC-301
debug isdn events command DC-196, DC-276, DC-657
debug isdn q921 command DC-326
debug isdn q931 command DC-61, DC-326, DC-657, DC-758
debug mgcp command VC-189
debug modem command DC-61, DC-149, FC-301
debug modem csm command DC-61, DC-758
debug ppp bap command DC-669
debug ppp chap command DC-41
debug ppp command DC-551, FC-301
debug ppp error command DC-41
debug ppp multilink events command DC-669
debug ppp negotiation command DC-41
debug ppp packet command DC-41
debug priority command QC-133
debug q921 command DC-196, DC-276
debug q931 command DC-196, DC-276
debug rcapi events command DC-256
debug redundancy command DC-115
debug resource pool command DC-756
debug standby events icmp command IPC-119
debug trunk cas port timeslots command DC-759
debug txconn all command BC-597
debug txconn appc command BC-597
debug txconn config command BC-597
debug txconn data command BC-597
debug txconn event command BC-597
debug txconn tcp command BC-597
debug txconn timer command BC-597
debug udptn command DC-173
debug vpdn commands DC-547
debug vpdn event command DC-549, DC-751
debug vpdn l2x command DC-751
debug vpdn l2x-events command DC-549
debug vtemplate command DC-499
debug x25 events command WC-300, WC-318
DECnet
access groups, configuring P3C-48
access list (example) DC-867
access lists
configuring P3C-46
creating P3C-47
filters, adding to P3C-47
accounting
configuring P3C-48
database threshold P3C-49
enabling P3C-49
filters P3C-49
maximum transit entries P3C-49
address mapping P3C-39
address translation, configuring P3C-56
address translation, networks, mapping between P3C-38
advertising Phase IV through OSI backbone P3C-42
area P3C-34
ATG, configuring P3C-38
broadcast routing timers, adjusting P3C-52
Cisco's implementation P3C-3
cluster alias configuration P3C-91
concurrent routing and bridging, enabling P3C-38
concurrent routing and bridging, interfaces, configuring P3C-37
congestion threshold, setting P3C-52
connect initiate packets, filtering P3C-47
conversion, Phase IV-to-Phase V P3C-40
cost, assigning to interfaces P3C-36
DDR
access lists DC-358
configuring DC-358
control packets DC-358, DC-373
DDR, configuring P3C-52
designated routers, specifying P3C-44
dialer profiles
access lists DC-433
configuring DC-433
control packets DC-433
encapsulation over Token Ring P3C-38
equal cost path P3C-50
extended access lists, configuring P3C-47
fast switching
filters P3C-48
hello timers, adjusting P3C-51
hop count, setting P3C-43, P3C-44
hops, setting
Level 1 routers, P3C-43
Level 2 routers P3C-44
host name mapping P3C-39
interarea routing P3C-37
interfaces, Token Ring P3C-38
intra-area routing P3C-37
in VLANs XC-321
IPX, configuration caveat P3C-34
LANE support XC-373
Level 1 routers, configuring P3C-43
Level 2 routers, configuring P3C-44
MAC addresses P3C-34
media supported P3C-3
MOP P3C-54
multicast address, mapping to functional address P3C-36
multicast address, SMDS address mapping to WC-247
name mapping P3C-39
network, monitoring and maintaining P3C-53
node, specifying P3C-37
over ISL encapsulation
configuration (example) XC-340
configuring XC-326
VLAN encapsulation format, defining XC-327
packet visits, configuring P3C-51
parameters, Cisco's implementation P3C-3
path selection, configuring P3C-50
performance optimization P3C-50
Phase IV areas through OSI backbone
(example) P3C-58
configuration P3C-42
Phase IV congestion information, transmitting over Frame Relay WC-12
Phase IV Prime
arbitrary MAC address, allowing P3C-35
cost to interface, assigning P3C-36
Phase IV-to-Phase V conversion P3C-4, P3C-40
Poor Man's Routing P3C-39
route cost, setting
Level 1 routers P3C-43
Level 2 routers P3C-44
routing, disabling P3C-34
routing, enabling P3C-55
concurrent routing and bridging P3C-38
on interfaces P3C-36
routing over Frame Relay (example) WC-209
routing table size P3C-43
SMDS, configuring WC-249
split horizon P3C-53
static discard routes, injecting P3C-42
static routes P3C-46
static routing, configuring P3C-44, P3C-45
timers, adjusting P3C-51, P3C-52
Token Ring, configuring on P3C-38
TR LANE support XC-373
WANs, routing over P3C-53
decnet access-group command P3C-48
decnet accounting command P3C-49
decnet accounting list command P3C-49
decnet accounting threshold command P3C-49
decnet accounting transits command P3C-49
decnet advertise command P3C-42
decnet area-max-cost command P3C-44
decnet area-max-hops command P3C-44
decnet congestion-threshold command P3C-52
decnet conversion command P3C-40
decnet cost command XC-327
decnet encapsulation command P3C-38, P3C-41
decnet hello-timer command P3C-51
decnet host command P3C-39
decnet in-routing-filter command P3C-48
decnet map command P3C-39
decnet max-cost command P3C-43
decnet max-hops command P3C-43
decnet max-paths command P3C-50
decnet max-visits command P3C-51
decnet node-type command P3C-37
decnet out-routing-filter command P3C-48
decnet path-split-mode interim command P3C-51
decnet path-split-mode normal command P3C-51
decnet propagate command P3C-46
decnet route-cache command P3C-52, XC-16
decnet route command P3C-44, P3C-45
decnet routing command P3C-34, XC-327
decnet split-horizon command P3C-53
dedicated mode
asynchronous interfaces, configuring DC-152
configuration (example) DC-43
default command VC-378
default-file vfc command VC-874
default form of a command
using FC-22
default-information command IPC-363
default-information originate (BGP) command IPC-318
default-information originate (IS-IS) command IPC-280
default-information originate (OSPF) command IPC-231
default-metric (BGP) command IPC-302, IPC-363
default-metric (IGRP and Enhanced IGRP) command IPC-363
default-metric (OSPF) command IPC-363
default-metric (RIP) command IPC-363
default-name command XC-381, XC-383
default networks, specifying IPC-359
Default Passive Interface IPC-365
default-router command IPC-69
default routes
IP
determining gateway of last resort IPC-360
specifying IPC-359
IS-IS, generating IPC-280
OSPF, generating IPC-231
specifying P2C-149
understanding P2C-81
default routes for outbound call legs VC-141
default-value exec-character-bits command FC-81
default-value special-character-bits command FC-81
Defense Communications Agency (DCA) certification WC-16
define command VC-81
definitions, VTAM BC-579
DE groups, defining WC-205
delay command IPC-144
delete command FC-141, FC-144, FC-145, FC-171
delete vfc command VC-875
delivery status notification VC-674
denial-of-service attacks
CBAC detection SC-234
half-open sessions SC-236
detection of
authentication proxy SC-298
using Cisco IOS Firewall IDS SC-273
IP address spoofing, mitigating SC-436
preventing
reflexive access lists SC-202
using TCP Intercept SC-213
Unicast RPF, deploying SC-436
deny command IPC-90
DES (Data Encryption Standard) SC-335, SC-379
IKE policy parameter SC-383
description command VC-248
designated routers
DECnet, specifying P3C-44
IS-IS, specifying election P3C-77
designated routers, IS-IS, specifying election IPC-278
destination, CTRC configuration BC-587
destination addresses, administrative filtering BC-113
destination-info command VC-328
destination-pattern command VC-120, VC-241, VC-243, VC-246, VC-247, VC-253, VC-254, VC-268, VC-273, VC-378, VC-379, VC-396, VC-433, VC-493, VC-548, VC-694, VC-696, VC-746, VC-748, VC-839, VC-879, VC-880
destination routing table
ISO CLNS, displaying P3C-97
deterministic load distribution BC-10, BC-22, BC-57
DFHCLNT definition group BC-580
DFHCNV table BC-580
DFHDCTG definition group BC-581
DFP (Dynamic Feedback Protocol)
configuring IPC-145
description IPC-138
DH (Diffie-Hellman)
See IKE, DH (Diffie-Hellman)
DHCP (Dynamic Host Configuration Protocol)
address pooling TC-133
and GGSN mobile sessions MWC-12
client proxy, enabling TC-133
configuration (examples) DC-45
DHCP and BOOTP packets IPC-32
GGSN
access points, configuring MWC-46
configuration (example) MWC-62
configuration, verifying MWC-52
configuring on MWC-45
IP address pooling, configuring DC-605
local IP address pool (example) DC-46
messages
dhcpack IPC-64
dhcpdecline IPC-64
dhcpdiscover IPC-64
dhcpoffer IPC-64
dhcprequest IPC-64
options, autoconfiguring IPC-72
server boot file, specifying IPC-71
use in AutoInstall FC-42
dhcp-gateway-address command MWC-28
DHCP pool configuration mode
summary FC-397
DHCP server
configuring a Cisco device as FC-55
dhcp-server command MWC-28, MWC-48
diag command FC-294
diagnostic testing FC-294
dial access scenarios
bidirectional dial DC-803
central site configurations DC-786
dial-in configurations DC-787
enterprise dial DC-785to DC-824
enterprises DC-777
mixed protocol enterprise network DC-818
remote office and telecommuters DC-786
service providers DC-777
Dial and System Management Commands for the Cisco AS5800
T1/E1 line termination IC-117
T1 cable length, configuring IC-117
dial backup
dialer profiles DC-459to DC-461
backup interfaces DC-460
dialer interfaces, configuring DC-460
ISDN BRI (example) DC-461
physical interfaces DC-460
ISDN channels DC-457
load threshold exceeded (examples) DC-457
load threshold reached (examples) DC-457
primary line down (examples) DC-458
serial interfaces DC-453to DC-458
See also Dialer Watch
dialer aaa command DC-680
dialer callback-secure command DC-651
dialer callback-server command DC-651
dialer caller command DC-653, DC-656
dialer dnis group command DC-739, DC-752
dialer DNIS group configuration mode, summary FC-398
dialer dns command DC-680
dialer dtr command DC-368
dialer enable-timeout command DC-374, DC-404, DC-651, DC-655, DC-656
dialer fast-idle command DC-374, DC-404, DC-430
dialer-group command DC-189, DC-212, DC-243, DC-245, DC-269, DC-373, DC-403, DC-429, DC-435, DC-460, DC-479, DC-612, DC-613
dialer hold-queue command DC-375, DC-405, DC-478, DC-650, DC-651
dialer idle-timeout command DC-319, DC-373, DC-404, DC-479, DC-612
dialer in-band command DC-243, DC-244, DC-368, DC-611, DC-613, DC-650, DC-651
dialer interfaces
See dialer profiles, dialer interfaces DC-10
dialer isdn command DC-430
dialer isdn short-hold command DC-319
dialer-list command DC-212, DC-360
dialer-list protocol (Dial) command DC-189
dialer-list protocol bridge command BC-34, DC-355, DC-372, DC-435, DC-436
dialer-list protocol command DC-360, DC-429
dialer-list protocol list command DC-360
dialer load threshold
MLP DC-613
idle timers DC-612
Multilink PPP
async interface DC-611
BRI, configuring single DC-612
BRIs in rotary group DC-613
idle timers DC-613
dialer load threshold command DC-243, DC-245, DC-375, DC-406, DC-611, DC-612, DC-613
dialer map bridge command BC-34
dialer map class DC-427, DC-446
dialer map command DC-212, DC-244, DC-369, DC-650, DC-651, DC-653, DC-655, DC-665, DC-678, DC-861
dialer map modem-script system-script command DC-371, DC-397, DC-401, DC-402
dialer map name command DC-399
dialer map name spc command DC-189, DC-194, DC-269
dialer map name speed command DC-189, DC-269
dialer mappings and CDP packets IPC-198
dialer maps, large-scale dial-out and DC-676
dialer map snapshot command DC-447
dialer pool command DC-429, DC-460, DC-479
dialer pool dialer profiles
backup interfaces DC-459, DC-463
physical interfaces DC-428
priorities DC-428
dialer pool-member command DC-431, DC-478
dialer priority command DC-375, DC-405
dialer profiles
AppleTalk, configuring DC-432
central site, multiple remote networks (example) DC-438
configuring DC-429
DECnet
control packets DC-433
dialer interfaces
description DC-427
remote destination and map class DC-429
See also interfaces
dialer map class DC-427, DC-446
dialer pool
description DC-427
dialer interfaces DC-428
physical interfaces DC-428
reserved channel DC-427
dialing pool reserved channels DC-431
inbound traffic filter (example) DC-438
IP
addresses, remote network node DC-427, DC-446
configuring DC-433
IPX, configuring DC-433
ISDN BRI, two leased lines (example) DC-439, DC-461
ISDN caller ID callback
callback actions DC-655
configuring DC-656
map class
configuring DC-430
fast idle timer DC-430
ISDN requirements DC-430
wait for carrier time DC-430
physical interfaces, configuring DC-427, DC-431, DC-448
remote sites with ISDN access only (example) DC-659
source address validation, disabling DC-352
transparent bridging
access control DC-435
bridging protocols, configuring DC-435
interesting packets DC-436
interfaces, configuring DC-436
type code access DC-436
VINES, configuring DC-432
XNS, configuring DC-434
Dialer Profiles feature DC-425
dialer redial
legacy DDR hubs, configuring DC-406
legacy DDR spokes, configuring DC-376
dialer remote-name command DC-460, DC-478
dialer reserved-links command DC-681, DC-692
dialer rotary, MLP DC-612
dialer rotary-group command DC-397, DC-400, DC-447, DC-611, DC-613
dialer rotary groups
(example) DC-418
bandwidth on demand load threshold DC-405, DC-437
interface priority DC-374
interfaces
assignment DC-400
priority DC-405
leader DC-396
dialer-string class command DC-429, DC-460
dialer string command DC-244, DC-369, DC-398, DC-401, DC-479, DC-653, DC-655
dialer wait-for-carrier-time command DC-374, DC-404, DC-430, DC-478, DC-655, DC-656, DC-667
Dialer Watch
addresses, configuring DC-465
benefits DC-464
configuration (examples) DC-466
configuring DC-464
interfaces
disable timer DC-465
interface status DC-465
dialer watch-disable command DC-466
dialer watch-group command DC-465
dialer watch-list command DC-465
dialing
DTR DC-368
configuration (example) DC-386
outgoing calls, configuring DC-368
remote interface DC-368, DC-370
remote passive interface DC-368, DC-370
X.25 encapsulation (example) DC-391
X.25 support (example) DC-423
legacy DDR
outgoing calls, configuring DC-369
dialing services
inbound performance optimization DC-158
outbound performance optimization DC-158
dial-peer configuration (example) VC-848
dial peer configuration mode
description FC-398
dial-peer cor custom command DC-337, VC-150
dial-peer cor list command DC-337, VC-150
dial-peer hunt command VC-145, VC-438
dial peers
class of restrictions VC-150
configuration
POTS VC-128
VoIP dial peers VC-131
configuring
dial peers VC-117
digit manipulation VC-117, VC-151
configuring dial peers for call legs VC-125
configuring on H.323 gateway
global system for mobile communications VC-878
dial-peer hunting VC-438
digit stripping on outbound POTS dial peers VC-124
direct inward dialing for POTS dial peers VC-142
hunt groups VC-144
inbound and outbound VC-119
matching
configuring VC-141
inbound dial peers VC-139
inbound IVR applications VC-139
numbering type VC-147
outbound dial peers VC-140
variable-length dial peer matching VC-138
matching capabilities VC-137
POTS VC-119
translation rules VC-157
troubleshooting VC-136
trunk-conditioning attributes, configuring VC-543
two-stage dialing VC-137
verification VC-135
video
configuring VC-746
VoATM VC-535
(example) VC-566
VoATM, two-way communication using VC-423
VoATM dial peers configuration VC-433
VoATM for Cisco-Trunk (private line) calls VC-437
VoFR VC-535
(example) VC-566
VoFR configuration VC-395
VoFR configuration types VC-388
VoIP VC-119
dial peers, description DC-332
See also ISDN, dial peers
dial peers, in MGCP configuration VC-180
dial-peer terminator command VC-123, VC-438
dial-peer video command VC-746, VC-748
dial peer voice command FC-423
dial-peer voice command VC-238, VC-240, VC-243, VC-246, VC-247, VC-253, VC-254, VC-268, VC-271, VC-277, VC-376, VC-378, VC-379, VC-396, VC-403, VC-433, VC-435, VC-493, VC-693, VC-839, VC-880
dial-peer voice command, in MGCP VC-187
dial-peer voice pots command VC-696
dial-peer voice voip command VC-549
dial shelf cards
executing commands directly on FC-295
dial shelves
configuring DC-106
remote configuration DC-114
shelf IDs, configuring DC-107
dial-tdm-clock priority command DC-109
dial-type command VC-49, VC-818
dialup mode
service modules, 2- and 4-wire CSU/DSU IC-141
dial-up software
connectivity problems
SLIP-PPP FC-101
DID (direct inward dialing)
configuring in dial peers VC-142
when matching outbound dial peers VC-140
differential services, supporting QC-347
differentiated service model
classification QC-22
defined QC-4
features
CAR QC-4
WFQ QC-4
WRED QC-4
DiffServ (Differentiated Services)
components QC-379
DSCP setting QC-375
DS field definition QC-376
feature sets QC-379
implementation (sample) QC-380
overview QC-375
PHB
assured forwarding QC-377
class-selector QC-377
default QC-376
expedited forwarding QC-378
troubleshooting log (sample) QC-388
digital modem network modules DC-209
digit manipulation VC-151
digit stripping VC-151
digit translation rules VC-157
dir command FC-234, FC-435, FC-436, FC-438
Flash files FC-139
direct-inward-dial command VC-693
direct-inward-dialing command VC-130, VC-142
directory services VC-367
disable command FC-12
discard policy XC-167
disconnect-ack command VC-85
disconnect-character command FC-77
disconnect command FC-96, FC-97
disconnect timers DC-333
configuration (example) DC-346
discovery mode
interfaces
dynamic P2C-13
extended P2C-14
nonextended P2C-14
Discovery Stage protocol WC-130
PPPoE over ATM WC-130
dispatch character
setting FC-86
dispatch-character command FC-86
dispatch-machine command FC-86
dispatch-timeout command FC-86
displaying active calls, in MGCP VC-189
display server, X Window System TC-51
distance bgp command IPC-317
distance command IPC-366, P3C-90
distinctive ringing, MGCP support of VC-182
distributed compression IC-89
Distributed CRTP
benefits QC-319
configuration (example) QC-342
configuring QC-341
description QC-16
prerequisites QC-320
restrictions QC-320
DistributedDirector
See DRP Server Agent IPC-83
distributed fair queueing, configuring XC-175
distributed VIP switching XC-72
distribute-list in command IPC-197, IPC-366, P2C-90, P2C-92
distribute-list out command IPC-197, IPC-366, P2C-90
distribute-sap-list out command P2C-92
distributions-of-statistics-kept command FC-346
DLCI (data-link connection identifier)
defining WC-192
destination address, mapping WC-161, WC-192
destination bridge, defining WC-161
for ISO CLNS frames, defining WC-161
map bridge, defining WC-192, WC-193
multicast mechanism WC-11
static address mapping WC-161, WC-191
status mechanism WC-11
for the subinterface, specifying WC-194
X.25 profiles WC-301
DLCI mapping BC-366
DLSw (Data Link Switching)
description BC-282
enhanced peer-on-demand routing BC-206, BC-283
expedited TCP connection BC-206, BC-283
DLSw+ (Data Link Switching Plus)
access control
description BC-307
ring or port lists BC-307
border peer
cache entry, displaying reachability BC-300
cache entry, resetting BC-299
configuration BC-298
description BC-296
disabling BC-299
group cache entry, deleting BC-299
group cache max entry configuration BC-299
cache, clearing BC-299
circuits
clearing BC-311
displaying BC-311
configuration
tuning BC-310
disabling BC-311
DLSw+ Lite
See LLC2
DSPU, supporting BC-210, BC-287
dynamic peer
configuration BC-302
description BC-302
enhanced load balancing mode
circuit weight, adjusting BC-304
timer, adjusting BC-304
Ethernet
bridge group, assigning BC-293
configuration BC-293
Token Ring (example) BC-320
Ethernet Redundancy feature BC-305
explorer firewalls BC-300
explorer traffic, reducing BC-309
FDDI
configuration BC-295
Token Ring (example) BC-321
Frame Relay configuration (example) BC-324
LLC1 circuit support BC-302
LLC2 local acknowledgment BC-286
LNM, supporting BC-210, BC-287
load balancing
description BC-303
enhanced version mode, description BC-303
enhanced version mode configuration BC-304
fault tolerant mode, description BC-303
local peer, defining BC-288, BC-485
maintaining BC-311
monitoring BC-311
NetBIOS DDR BC-300
network management tools BC-307
peer
backup configuration BC-305
border BC-328
dynamic configuration BC-208, BC-285
remote, TCP encapsulation BC-307
peer cluster, defining BC-298
peer group
defining BC-298
description BC-296
peer-on-demand configuration BC-299
promiscuous peer
configuration BC-302
description BC-302
QLLC
configuration (example) BC-325
configuration, description BC-294
enabling BC-294
remote peer
defining BC-289
direct encapsulation configuration BC-291
DLSw Lite encapsulation configuration BC-291
FST encapsulation configuration BC-290
TCP/IP with RIF Passthrough encapsulation configuration BC-290
TCP encapsulation configuration BC-289
ring list BC-307
RSVP Bandwidth Reservation
(examples) BC-331
SDLC
configuration BC-293
multidrop configuration BC-294, BC-318, BC-399
Token Ring (example) BC-322
SNA, DDR configuration BC-208, BC-285
SNA Service Point, supporting BC-210, BC-287
SNA-to-IP integration BC-3, BC-5
standard BC-204
static path configuration BC-309
static resource configuration BC-309
technology overview BC-281
timer configuration BC-310
Token Ring configuration BC-292
traffic
bandwidth management, description BC-307
explorer BC-309
UDP Unicast Enhancement BC-301
dlsw bgroup-list command BC-308
dlsw disable command BC-311
dlsw duplicate-path-bias command BC-298, BC-299, BC-301
dlsw group-cache disable command BC-299
dlsw group-cache max-entries command BC-299
dlsw load-balance command BC-304
dlsw local-peer command BC-288, BC-478, BC-485
dlsw netbios-keepalive-filter command BC-300
dlsw netbios-name command BC-309
dlsw peer-on-demand-defaults command BC-299, BC-303
dlsw port-list command BC-308
dlsw prom-peer defaults command BC-303
dlsw remote-peer frame relay command BC-291, BC-304
dlsw remote-peer fst command BC-290
dlsw remote-peer tcp command BC-289, BC-290, BC-298, BC-304, BC-480
dlsw ring-list command BC-307
dlsw timer command BC-299, BC-310
dlsw udp-disable command BC-301
DLUR (Dependent LU Requester)
CMPC (example) BC-836
configuration BC-809
configuration mode BC-789
link
dynamic to static BC-827
management BC-827
removing dynamic BC-827
PU
configuration BC-813
configuration mode BC-790
description BC-771
SAP
configuration BC-810
configuration mode BC-790
dlur command BC-809
DLUR SAP configuration mode, summary FC-415
dlus-backup command BC-809
DMDP (DNSIX Message Deliver Protocol) definition SC-427
DNIS (Dialed Number Identification Service)
DNIS number SC-146
encapsulation types based on DC-187
ISDN subaddress binding DC-193
(example) DC-200
preauthentication, configuring SC-121
server groups, selecting SC-119, SC-146
dnis group command DC-743
DNIS groups
RPM
configuring DC-739
troubleshooting DC-759
verifying DC-755
DNS (Domain Name System)
gatekeeper communication VC-307
IP
dynamic name lookup (example) IPC-51
name server IPC-16
ISO CLNS address discovery P3C-86
ISO CLNS addresses, configuring IPC-17
OSPF lookup of DNS names IPC-232
using to assign device names IPC-17
DNS (Domain Name System) nailing, inverse
(examples) BC-841
configuration BC-811
description BC-775
verification BC-823
DNS-based routing, X.25 WC-296
(example) WC-331
DNSIX (Department of Defense Intelligence Information System Network Security for Information Exchange)
audit trail facility SC-426
DMDP SC-427
enabling SC-427
hosts to receive messages SC-427
IPSO fields, extended SC-425
Network Audit Trail Protocol SC-427
transmission parameters SC-427
dnsix-dmdp retries command SC-427
dnsix-nat authorized-redirection command SC-427
dnsix-nat primary command SC-427
dnsix-nat secondary command SC-427
dnsix-nat source command SC-427
dnsix-nat transmit-count command SC-427
dns-server command IPC-68
Domain
See Apollo Domain
domain
bridging XC-311
broadcast XC-311
domain command DC-535
domain list, establishing IP (example) IPC-51
domain-name command IPC-68
domain name for the client, specifying IPC-68
domain names
certification authority interoperability
(example) SC-374
certification authority interoperability, configuring SC-366
domain-password command IPC-281, P3C-78
domains
ISO CLNS P3C-64
ISO IGRP P3C-64
OSPF IPC-364
routing information, redistributing between IPC-361
See AppleTalk, interenterprise routing
double authentication
access user profile SC-44
operation SC-42
DoVBS (Data over Voice Bearer Services)
configuring DC-744
overview DC-726
DPT (Dynamic Packet Transport) IC-128
DRAM (dynamic random-access memory)
description FC-211
reallocating for Cisco 3600 FC-220
DRDA (distributed relational database architecture)
and CTRC BC-241
DRiP (Duplicate Ring Protocol)
database, enabling XC-330
duplicate configurations BC-153, BC-181
drop mechanism XC-222
dropping packets XC-167
drop probability XC-167
DRP (Director Response Protocol)
configuration IPC-83
Server Agent
authenticate queries and responses IPC-84
description IPC-83
displaying information IPC-118
enabling IPC-84
key management IPC-84
limit source of queries IPC-84
statistics, clearing IPC-118
DRQ message
RAS VC-224
ds0-group command VC-55, VC-75, VC-551, VC-643, VC-644, VC-646, VC-648, VC-661, VC-845
ds0-group command, in MGCP VC-184, VC-186
DSBM (designated SBM)
candidate, configuring QC-308
definition QC-258
DSC (dial shelf controller)
configuring DC-108
digital voice port clock source VC-61
managing DC-115
redundancy DC-108
synchronizing clocks DC-109
DSCP (differentiated services code point) value
defined QC-182
use with WRED, configuring QC-190
dscp command QC-191
DSIP (Dial Shelf Interconnect Protocol)
architecture (figure) DC-106
overview DC-106
troubleshooting DC-115
DSN VC-674
dsn command VC-694
DSNJU003 utility BC-584
DSNTIPR panel BC-584
DSP field, NSAP address P3C-63
dspint dspfarm command VC-65
dspinterface dspfarm command VC-600
DSPU (downstream physical unit)
activation RU
defining BC-525
activation RU, defining BC-525
configuration
FDDI BC-517
task list BC-513
Token Ring BC-517
DLSw+ configuration (example) BC-534
downstream PU
default, defining BC-516
explicit definition, using BC-514
DSPU/RSRB interface, defining BC-519, BC-520
Ethernet, initiating connection BC-518
FDDI, initiating connection BC-518
LLC2/Frame Relay, initiating connection BC-525
local SAP
enabling BC-519
Ethernet, enabling BC-518
FDDI, enabling BC-518
LLC2/Frame Relay, enabling BC-524
NCIA Server, enabling BC-525
Token Ring, enabling BC-518
virtual data-link control, enabling BC-521
LUs
dedicated (example) BC-532
pooled (example) BC-533
pooled, defining BC-516
range, defining BC-517
monitoring and maintaining BC-531
NCIA
configuration (example) BC-537
server and SAP configuration BC-525
QLLC
configuration BC-523
initiating connection BC-524
RSRB
configuration BC-518
initiating connection BC-519
local acknowledgment configuration BC-520
SDLC configuration BC-521
SNA perspective BC-231, BC-512
Token Ring, initiating connection BC-518
upstream host, defining BC-513
virtual data-link control
initiating connection BC-521
interface, defining BC-521
local SAP, enabling BC-521
dspu activation-window command BC-525
dspu default-pu command BC-516
dspu enable-host (QLLC) command BC-523
dspu enable-host (SDLC) command BC-522
dspu enable-host command BC-518, BC-524
dspu enable-pu (QLLC) command BC-523
dspu enable-pu command BC-518, BC-524
dspu host (Frame Relay) command BC-514
dspu host (QLLC) command BC-513
dspu host (SDLC) command BC-513
dspu host (Token Ring, Ethernet, FDDI, RSRB, VDLC) command BC-482
dspu host command BC-513
dspu lu command BC-483, BC-516
dspu ncia command BC-483, BC-525
dspu notification-level command BC-531
dspu pool command BC-517
dspu pu (Frame Relay) command BC-515
dspu pu (QLLC) command BC-515
dspu pu (SDLC) command BC-514
dspu pu command BC-482, BC-514
dspu rsrb command BC-519, BC-520
dspu rsrb enable-host command BC-519
dspu rsrb enable-pu command BC-519
dspu rsrb start command BC-519
dspu start command BC-518, BC-522, BC-524
dspu vdlc command BC-521
dspu vdlc enable-host command BC-521
dspu vdlc enable-pu command BC-483, BC-521, BC-525
dspu vdlc start command BC-521
DSU (data service unit)
configuration information, displaying IC-122, IC-124
interoperability mode, setting IC-121, IC-123
maximum bandwidth, setting IC-123
dsu bandwidth command IC-121, IC-123
dsu mode command IC-121, IC-123
DTE
DDN X.25 encapsulation WC-314
devices, Frame Relay WC-178
LAPB, use in WC-260
rules for initiating calls on X.25 WC-267
virtual circuit range on X.25 WC-267
X.25 encapsulation WC-266, WC-288
dte-invert-txc command IC-101
DTMF (Dual Tone Multi-Frequency) relay
configuration VC-271
configuration (example) VC-287
description VC-216
fast connect, H.245 tunneling VC-217
dtmf-relay command VC-216, VC-227, VC-272, VC-397, VC-434
dtmf-relay h245-signal command VC-274
DTR (data terminal ready)
signal pulsing IC-100
DTR (data terminal ready), modem control and DC-29
DTS (Distributed Traffic Shaping)
See traffic shaping, Distributed
Dual Attach Stations
See DAS
dual Flash bank
benefits FC-214
configuring FC-214
partitioning Flash memory FC-214, FC-215
systems that support FC-214
versus Flash load helper FC-215
Dual RSPs
cold restart feature FC-432
configuration synchronization
automatic FC-434
configuration task list FC-433
failed card
reloading FC-444
general maintenance tasks FC-443
master and slave FC-432
monitoring and maintaining FC-443
slave
default slave, specifying FC-434
image, specifying FC-444
inactive slave, reloading FC-444
software error protection
(example) FC-438
system requirements FC-432
duplex mode, Fast Ethernet interface IC-35
DVMRP (Distance Vector Multicast Routing Protocol) IC-179
routes, redistribute into multiprotocol BGP IPC-349
See IP multicast routing, DVMRP
DWFQ (distributed WFQ)
configuration (example) QC-142
configuring QC-114
drop policy QC-88
monitoring QC-115
platform support QC-87
requirements QC-87
restrictions QC-88
DWRED (distributed WRED)
configuration (example) QC-192
exponential weight factor, configuring QC-188, QC-189
group definitions, attaching QC-250
packet drop in traffic policies QC-188
per-VC DWRED
configuring QC-296
drop policy, supporting QC-250
packet drop QC-250
platform support QC-177
uses QC-179
See also WRED
dxi map command WC-95
dxi pvc command WC-94
dynamic access lists VC-167
dynamic addressing, configuring DC-48
dynamic address mapping, SMDS WC-248
dynamic command IPC-91
dynamic crypto maps
See IPSec, crypto maps
dynamic inbound soft reset, BGP IPC-291
dynamic LU naming, TN3270 server
(examples) BC-840
description BC-774
verification BC-821
Dynamic Multiple Encapsulations feature DC-182
dynamic outbound soft reset, BGP IPC-292
dynamic rate queues, (example) WC-106
dynamic routing
See ISO CLNS, dynamic routing
E
E&M (receive and transmit) signaling interfaces VC-37
description VC-39
physical RJ-48 connector VC-39
signaling side VC-39
trunking side VC-39
E&M access signaling
delay-dial VC-40
immediate-start VC-40
wink-start VC-40
feature group B VC-72
feature group D VC-72
E.164
auto conversion, ATM WC-77
SMDS addresses, configuring WC-54
telephone numbering specification WC-77
E.164 addresses
registration of VC-215
E.164 routing
configuring (example) VC-347
enabling VC-321
E1
digital packet voice trunk network module VC-59
voice port configuration VC-66
E164_AESA address format WC-78
E164_ZDSP address format WC-78
E1 R2
CAS, configuring DC-288
configure DC-289
country settings DC-289
customizing parameters DC-289
sample topology DC-288
verifying signal DC-291
E3, configuring IC-120, IC-123
ear and mouth (E&M) voice ports
hoot and holler
configuring VC-841
ear and mouth signaling, description DC-13
EBCDIC (extended binary coded decimal interchange code)
IBM 3270 terminal character format TC-39
mapping control TC-46
EBCDIC (extended binary coded decimal interchange code), VTAM character translations BC-786
EBGP
function in autonomous systems XC-106
parameters XC-156
ECA (ESCON Channel Adapter) BC-243, BC-612
E character
in TFTP session output FC-245
echo-cancel coverage command VC-96
echo-cancel enable command VC-96
echo protocol
ping test FC-288
ecosystem gatekeeper interoperability
description VC-233
software restrictions VC-236
ECPA (ESCON Channel Port Adapter)
adapter, number supported BC-244, BC-614
description BC-614
edge
traffic-shaping tools VC-170
edge functions VC-165
edge LSR
adding redundancy XC-129
allowing unlimited XC-116
disabling XC-136, XC-137, XC-142
using as an MPLS LSC XC-119
edge routers, QoS functions QC-2
editing
command-line features
disabling FC-28
enabling FC-28
editing command FC-29
editor
capitalization
controlling FC-28
characters
transposing FC-28
command completion FC-25
cursor, moving FC-25
display
scrolling down FC-27
entries
deleting FC-26
features FC-24
keys and functions FC-25to FC-28
pasting from buffer FC-26
efci-bit command WC-238
EGP (Exterior Gateway Protocol), supported protocols IPC-3
egress edge device XC-439
EIGRP (Enhanced IGRP)
authentication, enabling IPC-265
bandwidth percentage IPC-260
Cisco implementation IPC-257
enabling IPC-259
features IPC-258
filters
offsets for routing metrics IPC-215
filters, offsets for routing metrics IPC-201, IPC-262
IGRP, transitioning from IPC-260
interfaces, displaying IPC-273
log neighbor adjacencies IPC-260
metrics, adjusting IPC-260
offsets, applying IPC-201, IPC-215, IPC-262
redistribution
(examples) IPC-377
RIP and EIGRP (example) IPC-377
route authentication IPC-265
route summarization IPC-262
SeeAppleTalk, EIGRP
split horizon, enabling IPC-267
stub routing
benefits IPC-271
configuration tasks IPC-272
configuring IPC-268
overview IPC-268
restrictions IPC-271
verifying IPC-272
timers, adjusting IPC-266, IPC-267
EIGRP (Enhanced Interior Gateway Routing Protocol)
AppleTalk, configuring P2C-44
IPX, configuring P2C-85
NLSP (NetWare Link Services Protocol) route redistribution P2C-89, P2C-115
(example) P2C-163
eigrp log-neighbor-adjacency-changes command P2C-156
eigrp log-neighbor-changes command IPC-260
eigrp stub command IPC-272
ELMI (Enhanced Local Management Interface)
See Frame Relay, ELMI
EMIF (ESCON Multiple Image Facility)
CMPC+ support BC-733
empty capabilities set
H.245 VC-226
emulated LANs
default XC-381
restricted membership XC-381, XC-383
adding database entries for clients XC-424
configuration (example) XC-399
database entries for all clients, configuring XC-383
database entries for clients, adding XC-384
setting up database for XC-383
unrestricted membership XC-381
configuration (example) XC-396
setting up database for XC-382
enabler packet XC-257
encapsulation
Cayman IC-174
EON IC-174
GRE IC-174
NOS IC-174
encapsulation aal1 command VC-729, VC-743
encapsulation aal2 command VC-430
encapsulation aal5auto command WC-128
encapsulation aal5 command WC-21, WC-32
encapsulation aal5mux voice command VC-427
encapsulation aal5snap command VC-428
encapsulation alc command BC-497
encapsulation arpa command IC-34
encapsulation atm-ces command VC-729, VC-737
encapsulation atm-dxi command IC-85, WC-94
encapsulation bstun command BC-366
encapsulation clear-channel command VC-725
encapsulation command BC-31, IC-64, IC-85, IC-90, IC-91, IC-93, IC-96, QC-358, WC-132, WC-133
encapsulation cpp command DC-325
encapsulation dot1q command XC-357, XC-358
encapsulation format
defining XC-325, XC-329, XC-351
IEEE 802.10 XC-325, XC-349, XC-351
ISL XC-325, XC-326, XC-329, XC-335, XC-336, XC-337
ISL, configuring XC-326
Security Data Exchange (sde) XC-325, XC-351
VLANs, defining XC-351
encapsulation frame-relay command BC-365, FC-54, WC-160
Annex G, configuring WC-301
SVCs, configuring WC-165
encapsulation frame-relay IETF command BC-524
encapsulation gtp command MWC-18
encapsulation hdlc command IC-90
encapsulation idle time, enabling WC-285
encapsulation isl command XC-325, XC-326, XC-327, XC-329, XC-332, XC-335, XC-336, XC-337, XC-338
encapsulation lapb command DC-379, DC-409, WC-261
encapsulation lapb dce command WC-261
encapsulation lapb dce multi command WC-261
encapsulation lapb multi command WC-261, WC-264
encapsulation ppp command DC-460, DC-498, IC-64, IC-91, IC-93, IC-96, P2C-38, WC-121
AO/DI configuration DC-243
authentication, use in DC-371, DC-399, DC-402, DC-598
enabling DC-597
interfaces
dialer configuration DC-460
dialer profile DC-429
physical DC-431
virtual template DC-486, DC-496, DC-635
WAN DC-478
modem over ISDN BRI configuration DC-212
encapsulations
AIP
AAL5-LLC SNAP WC-55
AAL5-MUX WC-55
AAL5-NLPID WC-55
AppleTalk P2C-3, P2C-4, P2C-8, P2C-30, P2C-35
AppleTalk Phase II
in VLANs XC-321
ATM, configuring WC-21
ATM-DXI IC-87
automatic detection DC-324
BFE WC-314
DDN X.25 WC-314
DECnet on Token Rings P3C-38
dynamic multiple DC-182, DC-426
Ethernet interface IC-32
formats
Novell Ethernet_802.2 XC-332
SAP XC-332
Frame Relay, configuring WC-160
HDLC IC-87
HSSI IC-85
IEEE 802.10 XC-349
IPX P2C-4
ISDN LAPB-TA autodetect DC-205
L2F DC-508
LAPB WC-260
multiprotocol WC-261
Novell IPX
configurable encapsulation XC-321
PPP, LAN Extender interface IC-62
proprietary voice on Cisco MC3810 concentrators VC-392
SMDS WC-245
split horizon for Frame Relay and SMDS, IGRP IPC-219
split horizon for Frame Relay and SMDS, RIP IPC-207
synchronous serial IC-87
tunneling IC-175
V.120 dynamic detection DC-203
VINES P3C-20
virtual profiles DC-507
VLANs
formats supported XC-320
X.25 WC-266
XNS P3C-124
encapsulations, IPSec-supported SC-338
encapsulation sap command IC-34
encapsulation sde command XC-325, XC-351
encapsulation sdlc command BC-293, BC-399, BC-521
encapsulation sdlc-primary command BC-400
encapsulation sdlc-secondary command BC-400
encapsulation smds command WC-245, WC-250, WC-252, XC-15
encapsulation snap command IC-34
encapsulation stun command BC-340
encapsulation tr-isl command BC-148
encapsulation types XC-174, XC-222
encapsulation x25 bfe command WC-314
encapsulation x25 command BC-295, BC-500, DC-378, DC-409, WC-266, WC-293
encapsulation x25 dce ddn command WC-314
encapsulation x25 ddn command WC-314
encrypted nonces
See RSA encrypted nonces
encryption algorithm
See IKE, algorithms
encryption command MWC-41, SC-385
encryptions, SSL
(examples) BC-843
configuration BC-804
description BC-781
verification BC-824
encryption tunnels XC-98
ending
sessions FC-76
end-of-line character
changing FC-80
endpoint, SIP VC-366
endpoint discriminator, changing MLP default DC-615
endpoint-type command VC-329
end-to-end delay VC-164
Enhanced IGRP
IPX, configuring P2C-85
enhanced peer-on-demand routing, DLSw BC-206, BC-283
Enhanced Voice Services
configuring VC-864
enrollment mode ra command SC-367
enrollment retry count command VC-507
enrollment retry-count command SC-367
enrollment retry-period command SC-367
enrollment url command SC-367, VC-507
Enterprise Extender
See SNASw, EE
enterprise networks
dial access scalability DC-786
dial access scenarios DC-785to DC-824, DC-829
environmental conditions
displaying FC-286
environmental monitor FC-305
environment variables
BOOT FC-232
BOOTLDR FC-232
(example) FC-234
setting FC-234
Cisco's implementation FC-232
CONFIG_FILE FC-233
controlling FC-233
viewing FC-233
EON IC-174
EPROM
description FC-212
erase nvram: command FC-146
erase startup-config command FC-170
erase vfc command VC-871, VC-875
ERPDU (error protocol data unit)
configuring P3C-95
disabling P3C-95
interval, determining P3C-95
error messages
^ character in FC-20
categories FC-292
IP address for syslog server FC-293
levels FC-291
logging keywords
(table) FC-291
severity levels FC-290
TFTP FC-245
See also message logging
ES (end system)
another ES, communicating with P3C-84
listing, for NSAP-to-SNPA mapping P3C-85
neighbors P3C-96
escape character
changing for current session FC-78
returning to EXEC prompt FC-93
escape character, setting FC-77
escape-character command FC-77
escape characters, modem chat strings DC-165
escape-char none command FC-107
ESCON (Enterprise System Connection)
channel attachment
CMPC+ support BC-733
director configuration
(figure) BC-621
IOCP BC-619
path argument BC-620
ESI (end station identifier)
addresses
(example) WC-103
configuring WC-31
ESI field and MAC address
in LANE ATM address XC-375
ES-IS (End System-to-Intermediate System)
configuring P3C-91
hello rate configuration P3C-91
protocol P3C-84
ESP (encapsulating security payload) SC-335
/etc/services file P2C-36
ETHERLIKE-MIB FC-321
Ethernet XC-221
encapsulation (example) IC-74
full-duplex (example) IC-75
interfaces, encapsulation IC-34
simplex circuit, configuring IPC-83
Ethernet, transparent bridging (example) BC-68
Ethernet interface
configuration (example) VC-849
Ethernet Redundancy, DLSw+ BC-305
ethernet-transit-oui command BC-28, BC-97
Ethernet Type II frames, assigning OUI BC-28
EVENT-MIB FC-322
event packages
MGCP support of VC-180
event window, Frame Relay end-to-end keepalive WC-184
exceed actions VC-170
exception flash command FC-298
exception linecard command FC-295
exception-queue length for ATM WC-51
exception slot command BC-638
EXEC
commands
privileged level FC-12
prompt
returning to from setup FC-62
startup
delaying FC-278
exec-banner command FC-101
exec-character-bits command FC-82
exec command DC-153
EXEC mode
switching from privileged to user FC-12
EXEC process
disabling DC-153
enabling DC-153
exec-timeout command DC-153, FC-103
execute-on command DC-114, FC-209, FC-295
exit command DC-286, FC-14, FC-96
exiting
sessions FC-96
expedited TCP connection, DLSw BC-206, BC-283
explorers
all-routes BC-90
fast-switching, disabling and enabling BC-119
frame processing, optimizing BC-118
proxy configuration BC-119
spanning-tree, topology configuration BC-90
storms, minimizing BC-92
exponential-weighting-constant command QC-356
export target communities XC-154
Express RTP and TCP Header Compression IPC-427, QC-318
extended access lists, IPX
See access lists, IPX
extended label ATM interface XC-178
extended MPLS ATM port XC-84
extended NACL configuration mode, summary FC-398
extended networks, AppleTalk P2C-8
extended networks, using IP secondary addresses IPC-9
external traffic
definition XC-30
enabling TMS collection XC-41
extranet XC-98
E Ya Yo
and Enhanced Voice Services for Japan VC-860
F
facility handling, X.25 WC-349
ITU-T marker facility (table) WC-351
standard facilities (table) WC-350
faildetect command IPC-142
fair-queue XC-175
fair-queue (class-default) command QC-89, QC-136, QC-364
fair-queue (DWFQ) command QC-116
fair-queue (WFQ) command QC-114
fair-queue aggregate-limit command QC-116, QC-117
fair-queue command QC-188
fair-queue individual-limit command QC-116, QC-117
fair queueing
See DWFQ; WFQ
fair-queue limit command QC-116, QC-117
fair-queue qos-group command QC-116
fair-queue tos command QC-117
fair-queue weight command QC-116, QC-117
fast connect
H.323 Version 2
description VC-226
Fast EtherChannel
CEF IC-47
configuring IC-48
example IC-77
Fast Ethernet
assigning IC-49
removing IC-49
HSRP IC-47
information about, displaying IC-50
keepalives IC-50
Fast Ethernet
AS5300, configuring IC-35
Fast EtherChannel
(example) IC-77
assigning IC-49
description of IC-46
information about, displaying IC-50
removing IC-49
full-duplex IC-34
media type IC-35
RJ-45 receptacle IC-32
FastPath router
AppleTalk P2C-35
K-Star P2C-11
fast switched policy routing IPC-371
fast-switched SR/TLB, disabling BC-94, BC-97
fast-switched transparent bridging over SMDS WC-250
fast switching
and SRB BC-116
AppleTalk P2C-44
cache entries P2C-55
configuration (example) BC-140
DECnet, disabling P3C-51
description P2C-148, XC-5, XC-8, XC-13
disabling
AppleTalk XC-16
DECnet XC-16
IP XC-14
IPX XC-17
VINES XC-16
XNS XC-17
enabling
AppleTalk XC-13
IP XC-14
IPX XC-15
same interface XC-14
enabling for directed broadcast packets
IPX XC-15
for GPRS, configuring MWC-34
IP
disabling DC-586
enabling DC-586
IPX
cache entries, deleting P2C-154
cache entries, displaying P2C-154
directed broadcast packets P2C-147
disabling P2C-148
over ATM P2C-120
over Frame Relay P2C-120
over SMDS P2C-120
L2F traffic DC-508
legacy DDR
AppleTalk XC-15
IP XC-15
IPX XC-15
SSE, SRB BC-117
VINES
deleting P3C-26
disabling P3C-23
displaying P3C-26
XNS, disabling P3C-132
fast switching, SMDS WC-250
AppleTalk packets WC-252
IP packets WC-252
IPX packets WC-252
fault management
description FC-285
fault-tolerant strategy
booting with FC-201
fax calls, MGCP support of VC-182, VC-183
fax interface-type command VC-705
fax protocol command VC-707
fax rate command VC-400
fax receive called-subscriber command VC-692
fax-relay ecm disable command VC-704
fax send max-speed command VC-695
fax send transmitting-subscriber command VC-695
fax transmission speed
configuring VC-695
FDDI
bandwidth, determining IC-54
bit control, setting IC-56
bridging configurations IC-53
C-Min timer IC-55
CMT microcode control IC-56
description IC-50
duplicate address checking IC-55
encapsulation mode compatibility IC-53
frame contents IC-50
frames-per-token IC-57
configuration (example) IC-57
full-duplex IC-54
SMT
frame processing IC-55
Version 7.3 IC-50
TB-Min timer IC-55
timeout timer IC-55
transmission time, controlling IC-54
FDDI (Fiber Distributed Data Interface)
SRB BC-89
FDDI, IPX encapsulation P2C-82
fddi burst-count command IC-57
fddi c-min command IC-55
fddi cmt-signal-bits command IC-56
fddi duplicate-address-check command IC-55
fddi encapsulate command IC-53
fddi if-cmt command IC-56
fddi smt-frames command IC-55
fddi tb-min command IC-55
fddi tl-min-time command IC-54
fddi token-rotation-time command IC-54
fddi t-out command IC-55
fddi valid-transmission-time command IC-54
Feature Group D- Operator Services. See FGD-OS
feature interaction
IPX MLS
restrictions XC-293
Feature Navigator See platforms, supported
FECN (forward explicit congestion notification), FRTS QC-218
FEIP2-DSW-2FX interfaces caution IC-34
FEP (front-end processor)
CMCC adapter alternative BC-247, BC-674
replacement BC-5
FGD-OS (Feature Group D-Operator Services), MGCP support of VC-182
field diagnostic testing FC-294
FIFO (First In First Out) queueing QC-83, VC-166
files
content, displaying FC-140
deleting FC-141, FC-144, FC-145
deleting permanently FC-142
downloading
output FC-187
downloading using Flash load helper FC-217
download mode, setting FC-80
recovering deleted FC-141, FC-144
file system
contents FC-138
default FC-138
Flash FC-140
list FC-137
NVRAM FC-146
remote operations FC-146
filter-for-history command FC-348
filtering
at --More-- prompts FC-34
packets
route maps VC-167
See access lists
filtering routes
by a group of prefixes IPC-330
by a group prefix list IPC-329
by a prefix list IPC-297
filters
AppleTalk
data packet
(example) 1
zones 1
partial zones P2C-25
(example) 1
routing P2C-23
routing table P2C-24
routing table (example) P2C-60
routing update filters P2C-23
bridging, LAT service announcements BC-48
DECnet, adding to access lists P3C-47
EIGRP
offsets for routing metrics IPC-201, IPC-215, IPC-262
IP
on routing information IPC-364
on sources of routing information IPC-366
suppressing routes from being advertised IPC-366
suppressing routes from being processed IPC-366
suppress routing updates IPC-364
See also access lists, IP
IPX
broadcast P2C-133
generic P2C-130
GNS P2C-131
overview P2C-122
routing table P2C-130
SAP P2C-131
IPX Enhanced IGRP
routes P2C-90
route updates P2C-90
SAP updates P2C-92
ISO CLNS, creating P3C-87
SAP P2C-115
SRB
administrative BC-111
destination address BC-113
source address BC-113
transparent bridging, setting BC-44
VINES
interface, applying to P3C-19
types P3C-19
XNS
interface, applying to P3C-126, P3C-127
types (table) P3C-125
See also access lists, IP
Finger protocol
enabling FC-262
firewalls SC-183
CBAC guidelines for SC-241
Cisco IOS Firewall
feature set SC-184
solution SC-183
configuring SC-183
creating SC-184
guidelines SC-188
See also CBAC; Cisco IOS Firewall
firewalls, H.323 proxy VC-300
firmware
filename location command DC-124
fixed-length dial plans VC-122
Flash load helper FC-217
booting after FC-218
description FC-215
failures FC-218
software upgrades FC-215
versus dual Flash bank FC-215
Flash memory
automatically booting from
configuring FC-198
booting from
configuring backup sources (example) FC-202
booting from (example) FC-198
buffer overflow message FC-186
checksum, verifying FC-194
configuration files
copying to (example) FC-170
copying
Flash contains named file (example) FC-189
Flash is full (example) FC-188
security jumper not installed (example) FC-189
space considerations FC-186
description FC-212
ensuring available space before copying to FC-186
file system types FC-140
formatting FC-218
(example) FC-219
HTML pages FC-125
images
copying from FC-180
copying to FC-185
verifying checksum FC-194
information, displaying FC-214
manually booting FC-238
rcp server, copying from FC-181
security precautions FC-213
storing configuration files FC-163
storing HTML pages with SSIs FC-126
TFTP server
(example) FC-245
client router (example) FC-246
client router, configuring FC-246
write protection FC-213
Flash memory, RSP, requirements BC-626
Flash memory cards
See PCMCIA Flash memory cards
Flash memory devices
default
(example) FC-138
displaying FC-138
setting FC-138
files
copying FC-167
deleting FC-141, FC-144, FC-145
deleting permanently FC-142
listing FC-138
(example) 1
recovering deleted FC-141, FC-144
flexible netmask display IPC-47
floating static routes, IPX P2C-140
floating static routes, VINES P3C-24
flooded broadcasts, IPX P2C-147
flow-based WRED
benefits QC-181
configuration (example) QC-196
configuring QC-190
enabling QC-190
flow count value, setting QC-190
flow threshold scaling factor, configuring QC-190
overview QC-181
See also WRED
flow classification, configuring QC-276
flow control VC-171
default values
for XOT, configuring WC-294
setting WC-271
end transmission FC-86
parameter negotiation
overview WC-269
setting WC-270
setting for line FC-86
start character FC-86
stop character FC-86
flow control, input X.3 PAD parameters TC-191
Flow Delivery Agent
See ContentFlow architecture, Flow Delivery Agent
flow masks
IP multicast MLS XC-262
flows
IP multicast MLS
completely and partially switched XC-263
fonts
DECwindows, access TC-54
remote access TC-52
X terminal nonresident, access to TC-54
Foreign Agent services, enabling (Mobile IP) IPC-168
format command FC-219
Forum protocols XC-142
forward delay interval BC-51
forward-digits command VC-130, VC-154
forward equivalence class XC-88
Forward Explicit Congestion Notification
See Frame Relay, FECN
Forwarding Agent
See MNLB Forwarding Agent
forwarding-agent command IPC-117
forwarding-agent pools command IPC-117
forwarding calls, X.25 (example) WC-329
fractional T1/T1 service modules
Cisco 2524 IC-134
Cisco 2525 IC-134
fragment control IPC-92
frame-copied errors, Token Ring BC-120
framed mode IC-102
frame forwarding
T-CCS
configuring VC-645
frame processing
MPOA XC-445
Frame Relay XC-98
address mapping
dynamic, configuring WC-160
and Inverse ARP WC-160
overview WC-160
static, configuring WC-161
backup interfaces WC-193
Bc WC-166
booting from network server (example) WC-216
boundary access node configuration BC-450
bridging WC-11
configuration (examples) BC-72
with multicasts BC-73
with no multicasts BC-72
broadcast queue WC-195
priority condition WC-195
transmission rates WC-195
burst size, setting WC-166
CIR
minimum incoming, setting WC-166
minimum outgoing, setting WC-166
committed information rate, specifying WC-166
compressions, VIP WC-199
condition signalling WC-215
configuring WC-159
(examples) WC-207
congestion backward-notification mechanism, specifying WC-175
congestion information WC-12
congestion management
configuration mode, summary FC-399
connections WC-206
monitoring and maintaining WC-206
custom queue-list, specifying WC-166, WC-175
DCE devices, configuring WC-178
(example) WC-218
(figure) WC-218
DCE switch WC-178
DDR
configuration overview DC-408
restrictions DC-408
DE bit WC-205
DE list, defining WC-205
device, configuring WC-178
dialup connections DC-377, DC-407
discard eligibility (DE) bit WC-205
DLCI
configuring WC-301
and the LMI, displaying WC-206
multicast mechanism WC-11
priority levels WC-206
static address mapping WC-191
status mechanism WC-11
DTE devices WC-178
ELMI
address registration WC-171to WC-174
enabling WC-173
with Frame Relay traffic shaping WC-171
IP address, configuring WC-173
QoS autosense, overview WC-171
encapsulation
between RSRB peers (example) BC-266
configuration BC-365
encapsulation, configuring WC-160
encapsulation types WC-160
IETF (example) WC-207
end-to-end keepalives WC-184
bidirectional mode WC-184
configuration tasks WC-184
error event WC-184
errors event, checking WC-185
event window WC-184
mode, configuring WC-185
passive-reply mode WC-184
receive side WC-184
reply mode WC-184
request WC-184
request mode WC-184
send side WC-184
showing WC-185
state, modifying WC-185
success events WC-184
timer WC-184
timer, modifying WC-185
fast-path transparent bridging BC-34
fast switching, IPX P2C-120
fragmentation
Cisco-proprietary WC-197
conditions and restrictions WC-198
FRF.11 Annex C WC-197
FRF.12 (example) WC-227
FRF.12, configuring WC-196
FRF.12, on switched PVCs WC-182
FRF.12, overview of WC-195
with hardware compression WC-197
with hardware compression (example) WC-228
methods WC-195
on switched PVCs (example) WC-224
fragmentation, configuring WC-195
FRF.12 fragmentation QC-316
FRF.5 Network Interworking
configuring WC-235
FRF.5 Implementation Agreement WC-1
maintaining WC-240
many-to-one network interworking (example) WC-241
one-to-one network interworking (example) WC-240
platform support WC-233
verifying WC-236
FRF.8 Service Interworking
(example) WC-241
configuring WC-238
FRF.8 Implementation Agreement WC-2
maintaining WC-240
platform support WC-233
verifying WC-239
GTS, configuring QC-224
hardware WC-158
hardware compression with header compression, configuring WC-200
idle timeout interval, setting WC-167
IETF encapsulation (examples) WC-207
enabling WC-194
subinterfaces WC-191
IP unnumbered (example) WC-210
IPX (examples) WC-210
keepalive interval, setting WC-163
LAPF WC-168
legacy DDR
configuration overview DC-378
interfaces supported DC-377
restrictions DC-377
LFI
configuration (example) QC-333
monitoring QC-332
overview QC-315
verifying QC-332
LLQ
enabling QC-139
prerequisites QC-105
verifying QC-139
VoFR, effect on QC-105
LMI
autosense WC-162
DCE polling verification timer WC-164
DTE error threshold WC-164
DTE full status polling interval WC-164
DTE monitored events counter WC-164
explicit configurations WC-163
keepalives WC-163
NNI error threshold WC-164
NNI monitored events counter WC-164
NNI polling verification timer WC-164
polling intervals WC-164
specifications WC-11
map classes, specifying WC-166, WC-174
map entries, displaying WC-207
map groups, assigning WC-165
maps, clearing WC-206
MIB extensions WC-158
multicast mechanism WC-11
multipoint subinterfaces
DLCI associations WC-191
dynamic address resolution WC-191
dynamic address resolution (example) WC-210
enabling CDP on FC-329
NNI
interfaces WC-178
See also Frame Relay, LMI
over AppleTalk (example) WC-208
over ISDN WC-176
over X.25 (Annex G)
(example) WC-331
overview WC-300
packet discard eligibility WC-205
payload compression
data-stream compression (examples) WC-229to WC-230
data-stream compression, configuring WC-200
FRF.9 compression (example) WC-228
FRF.9 compression, configuring WC-199
packet-by-packet compression, configuring WC-199
verifying WC-202
PIPQ (PVC Interface Priority Queueing)
configuration (example) QC-152
description QC-96
enabling QC-130
FIFO queueing, effect on QC-96
Frame Relay traffic shaping, effect on QC-96
FRF.12 fragmentation, effect on QC-96
monitoring QC-131
prerequisites QC-97
PVC priority, configuring QC-130
queue size, configuring QC-130
restrictions QC-97
verifying QC-131
point-to-point links (example) WC-211
point-to-point tunnel (example) WC-220
port concentrator WC-179
PPP
DCE configuration (example) WC-227
DTE configuration (example) WC-226
frame format WC-186
PVC mapping, defining WC-187
restrictions WC-186
sessions WC-186
priority queue-list, specifying WC-166, WC-175
PVC Interface Priority Queueing
See Frame Relay, PIPQ
PVC switching (examples) WC-219
routing protocols WC-11, WC-161
RSVP
configuration (example) QC-287
configuration tasks QC-281
considerations QC-264
described QC-247
monitoring QC-287
verifying QC-285
software capabilities WC-11
SRB configuration BC-451
standards WC-11
static mapping
(examples) WC-208
supported protocols WC-192
status mechanism WC-11
STUN
configuration BC-345
local acknowledgment (example) BC-355
addressing WC-190
configuring WC-187
partially meshed networks WC-188
point-to-point addressing WC-190
split horizon WC-188
static address mapping WC-191
transparent bridging WC-192
SVCs
configuring WC-165
group addresses WC-167
interfaces WC-165
map class WC-166
overview WC-164
platforms WC-164
static address mapping WC-167
subinterfaces WC-166
support for, enabling WC-165
SVCs and PVCs WC-12
switching
configuring WC-177
congestion management, configuring WC-180
enabling WC-178
and FRF.12 fragmentation (example) WC-224
and FRF.12 fragmentation, configuring WC-182
and FRF.12 fragmentation, restrictions WC-182
hybrid PVC (figure) WC-219
over IP tunnel (figure) WC-220
over ISDN, configuring WC-178
over ISDN, overview of WC-176
static routes, specifying WC-178
traffic policing, configuring WC-179
traffic shaping, configuring WC-179
troubleshooting WC-183
verifying WC-182
TCP/IP header compression WC-202to WC-204
throughput WC-195
traffic rate, defining WC-174
traffic shaping WC-12
(example) WC-212
access lists WC-175
customizing WC-175
DLCIs WC-174
enabling WC-169
PVCs and SVCs WC-168
on switched PVCs WC-179
traffic statistics, displaying WC-207
transparent bridging WC-192
(example) WC-211
transparent bridging configuration BC-34
Frame-Relay
map compression IC-92
payload compression, configuring IC-95
Frame Relay, LAT-to-LAT protocol translation (example) TC-158
Frame Relay, split horizon IPC-207, IPC-219
frame-relay adaptive shaping becn command VC-395
frame-relay address-reg enable command WC-174
frame-relay address registration auto-address command WC-173
frame-relay address registration ip command WC-173
Frame Relay-ATM Interworking
FRF.5 Network Interworking
configuration examples WC-240
FRF.8 Service Interworking
configuration example WC-241
platform support WC-233
frame-relay bc command WC-166
frame-relay bc out command VC-395
frame-relay becn-response-enable command WC-166
frame-relay be command WC-167
frame-relay be out command VC-395, WC-167
frame-relay broadcast-queue command WC-195
frame-relay cir in command VC-395
frame-relay cir out command VC-395
frame-relay class command WC-174
frame-relay congestion management command WC-181
frame-relay congestion threshold de command WC-181
frame-relay congestion threshold ecn command WC-181
frame-relay custom-queue-list command WC-166
frame-relay de-group command WC-205
frame-relay de-list command WC-205
Frame Relay Forum
FRF.5 Implementation Agreement WC-1
FRF.8 Implementation Agreement WC-2
Frame Relay for Voice over IP (VoIP)
global system for mobile communications
full rate and enhanced full rate codecs
configuration (example) 1
frame-relay fragment command WC-196
frame-relay holdq command WC-181
frame-relay idle-timer command WC-167
frame-relay interface-dlci command FC-54, VC-401, WC-190, WC-193
backup interface, configuring WC-194
point-to-point subinterface, configuring WC-190
frame-relay interface-dlci ppp command WC-187
frame-relay interface-queue priority command QC-130
frame-relay intf-type command WC-178
frame-relay inverse-arp command WC-194
frame-relay ip rtp compression-connections command IPC-427
frame-relay ip rtp header-compression command IPC-426, QC-338
Frame Relay IP RTP Priority
configuring QC-128
feature description QC-11, QC-96
monitoring QC-129
verifying QC-129
frame-relay ip rtp priority command QC-128
frame-relay ip tcp header-compression command WC-204
frame-relay lmi-n391dte command WC-164
frame-relay lmi-n392dce command WC-164
frame-relay lmi-n392dte command WC-164
frame-relay lmi-n393dce command WC-164
frame-relay lmi-n393dte command WC-164
frame-relay lmi-t393dce command WC-164
frame-relay lmi-type command WC-163
frame-relay map bridge broadcast command BC-35
frame-relay map bridge command WC-161
frame relay map bstun command BC-370
frame-relay map bstun command BC-366
frame-relay map clns command WC-161, WC-192
frame-relay map command WC-161, WC-200
frame-relay map ip command FC-54
frame-relay map ip compress command IPC-426, QC-338
frame-relay map ip no compress command WC-204
frame-relay map ip nocompress command IPC-426
frame-relay map ip rtp header-compression command IPC-426, QC-338
frame-relay map llc2 command BC-370, BC-524
frame-relay map payload-compress command WC-199
frame-relay map payload-compress frf9 stac command WC-200
frame-relay map rsrb command BC-261
frame-relay min-cir command VC-395
frame-relay mincir command WC-166
frame-relay payload-compress command WC-199
frame-relay policing command WC-180
frame-relay priority-dlci-group command WC-206
frame-relay priority-group command WC-166
frame-relay qos-autosense command WC-173
frame-relay route command WC-178
frame-relay svc command WC-165
frame-relay switching command WC-178
frame-relay tc command WC-180
frame-relay traffic-shaping command WC-169
frame-relay voice bandwidth command VC-394
frames, transmission IC-57
frame sequencing BC-362
frame tagging
VLANs XC-318
frame-type command IC-42
framing command DC-285, DC-752, IC-106, IC-121, IC-124, VC-73, VC-734, VC-757
framing crc4 command DC-264, DC-280
framing esf command DC-265, VC-598
FRAS (Frame Relay Access Support)
BAN
(example) BC-465
description BC-451
RFC 1490 BC-223
BNN BC-447
dynamic configuration BC-450
SAP multiplexing BC-462
static configuration BC-450
topology (example) BC-462
dial backup
description, DLSw+ BC-453
description, RSRB BC-453
DLSw+ (example) BC-468
DLCI backup
(example) BC-467
description BC-452
host
configuration BC-458
description BC-456
FRAD access BC-457
LLC2, local termination description BC-459
LLC2, passthrough description BC-456, BC-459
minicomputer connectivity BC-458
LAN-attached SNA devices (example) BC-461, BC-465
maintaining BC-455
managing congestion BC-452
monitoring BC-455
SDLC-attached SNA devices (example) BC-461
SRB
configuration BC-451
over Frame Relay (example) BC-466
fras backup dlsw command BC-454
fras backup rsrb command BC-453
fras ban dlci command BC-451
fras ddr-backup interface command BC-452
fras map llc command BC-450
fras map sdlc command BC-450
free-trade zone
AppleTalk
(example) P2C-66
freq-max-delay command VC-87
freq-max-deviation command VC-87
freq-max-power command VC-87
freq-min-power command VC-87
freq-pair command VC-87
freq-power-twist command VC-87
frequency command FC-344, FC-354
FRF.12 Fragmentation QC-316, WC-195
on switched PVCs WC-182
See also Frame Relay, fragmentation
FRF.5
configuration mode, summary FC-399
See Frame Relay, FRF.5 Network Interworking
FRF.8
configuration mode, summary FC-399
See Frame Relay, FRF.8 Service Interworking
FRF.9 Compression
See Frame Relay, payload compression
FRTS VC-170
FRTS (Frame Relay Traffic Shaping) QC-217, VC-170
FST (Fast-Sequenced Transport)
performance considerations BC-203, BC-252
with RSRB
(example) BC-268
configuration BC-256
FTP
configure router for connections FC-255
configuring (example) FC-255
passive-mode FC-255
FTP (File Transfer Protocol)
username, specifying FC-255
FTP attacks
CBAC error messages SC-249
FTP Server
configuration files, downloading FC-175
full-duplex command BC-369, IC-34, IC-54
functional addresses IPC-410
Fusion Call Control Signaling (NEC Fusion) VC-634
FXO (foreign exchange office)
Disconnect Supervision feature VC-84
signaling interfaces VC-37
supervisory disconnect tone VC-86
FXS (foreign exchange station), signaling interfaces VC-37
FXS hookflash relay
configuration (example) VC-287
configuring VC-274
FXS port, in MGCP configuration VC-182
G
G.703 interface IC-101, IC-102
Ga interfaces
See GPRS, interfaces
gatekeeper command VC-304, VC-309, VC-310, VC-311, VC-313, VC-317, VC-321, VC-323, VC-325, VC-326, VC-327, VC-330, VC-763
gatekeepers
as HSRP VC-290
call clearing VC-211
C code generic API for GKTMP
in a UNIX environment VC-228
clustering VC-269
communication
configuring VC-303
configuring (example) VC-346
configuring as Hot Standby Router Protocol (HSRP) VC-296
configuring HSRP (example) VC-349
endpoint identification VC-293
redundant
configuration of zone prefix (example) VC-347
configuring for a technology prefix VC-311
configuring for a technology prefix (example) VC-347
settlement VC-264
starting VC-304
static node VC-313
terminal name registration VC-293
Version 2
configuring VC-322
zone
configuring VC-291
description VC-202
gatekeeper-to-gatekeeper redundancy, load-sharing mechanism VC-292
restrictions VC-302
gateway
AAA configuration (example) VC-281
gateway command VC-250, VC-268
gateway configuration
global system for mobile communications
full rate and enhanced full rate codecs
verifying 1
gateway of last resort, definition IPC-213, IPC-360
gateways VC-367
codec negotiation VC-225
configuration VC-250
AAA VC-255
audio index files VC-490
debit card for packet telephony VC-479
H.323
interface 1
IVR VC-457
RAS VC-252
settlement for packet telephony VC-499
DTMF relay VC-216
gateway security
configuration VC-262
H.323
disconnecting all calls (example) VC-363
H.450 configuration VC-239
hookflash relay VC-217
multiple
defining one zone (example) VC-360
multiple zones
defining VC-360
network-based billing number VC-228
prerequisite tasks VC-249
protocol conversion VC-5, VC-201, VC-205
RAS configuration (example) VC-280
redirect number information tunnel VC-215
residential VC-181
resource availability reporting
description VC-215
selection process VC-214
troubleshooting RAS configuration VC-255
trunking VC-182
verification
alternate gatekeeper configuration VC-271
debit card for packet telephony configuration VC-494
gateway security configuration VC-269
H.323 gateway interface configuration VC-252
RAS configuration VC-255
voice-port description support VC-229
gateway security
configuration VC-262
gateway-to-gatekeeper billing redundancy VC-233
GCF message
RAS VC-221
generic-pool command BC-796, BC-808, BC-810
generic pools, TN3270 server configuration BC-795to BC-796
generic routing encapsulation
See GRE
Germany, ISDN semipermanent connection support DC-189
GGS (Get General Service)
filters P2C-131
GGSN (Gateway GPRS Support Node)
configuration (example) MWC-64
configuration requirements MWC-17
configuring MWC-18
GGSN access groups, description MWC-13
GGSN access point lists
configuration (example) MWC-56
configuring MWC-28
description MWC-13
VPN, configuring MWC-30to MWC-31
GGSN access points
configuration
verifying MWC-51
configuring MWC-28
description MWC-13
non-transparent access, configuring MWC-38
planning MWC-15
RADIUS server, configuration (example) MWC-58
security, configuring on MWC-39
See also GGSN access point lists
GGSN charging gateways
(example) MWC-63
configuring MWC-21
customizing MWC-23
default, changing MWC-22
disabling MWC-24
TCP, configuring MWC-22
UDP (User Datagram Protocol), configuring MWC-22
GGSN charging transactions
disabling, (caution) MWC-24
GGSN physical interfaces
configuration (example) MWC-57
defining MWC-25
fast switching, enabling on MWC-34
PDN, configuring to MWC-27
Gi interfaces
See GPRS, interfaces
GKTMP (Gatekeeper Transaction Message Protocol), RAS messages VC-219
configuration (example) VC-363
global configuration mode
description FC-13
exiting FC-13
summary FC-18
global flow cache XC-142
global system for mobile communications
full rate and enhanced full rate codecs
overview VC-877
global system for mobile communications (GSM)
full rate and enhanced full rate codecs
overview VC-877
global system for mobile communications(GSM)
full rate and enhanced full rate codecs
restrictions VC-877
Gn interfaces
See GPRS, interfaces
GNS (Get Nearest Server)
filters P2C-131
request response delay P2C-145
requests P2C-145
GOSIP (Government OSI Profile)
ISO CLNS compliance with P3C-4
NSAP format P3C-66
GPRS (General Packet Radio Service)
description MWC-7to MWC-8, MWC-11to MWC-13
interfaces
(figure) MWC-13
configuration (example) MWC-57
configuration, verifying MWC-49
configuring to PDN MWC-27
implemented on GGSN MWC-12
gprs access-point-list command MWC-28, MWC-38
gprs charging cdr-aggregation-limit command MWC-23
gprs charging cdr-option local-record-sequence-number command MWC-23
gprs charging cdr-option node-id command MWC-23
gprs charging cdr-option no-partial-cdr-generation command MWC-23
gprs charging cdr-option packet-count command MWC-23
gprs charging cdr-option served-msisdn command MWC-23
gprs charging cg-path-requests command MWC-22, MWC-23
gprs charging container volume-threshold command MWC-23
gprs charging disable command MWC-23, MWC-24
gprs charging flow-control private-echo command MWC-23
gprs charging map data tos command MWC-23
gprs charging packet-queue-size command MWC-23
gprs charging path-protocol command MWC-22, MWC-23
gprs charging server-switch-timer command MWC-23
gprs charging tariff-time command MWC-23
gprs charging transfer interval command MWC-23
gprs default charging-gateway command MWC-21, MWC-22
gprs default dhcp-server command MWC-47
gprs default ip-address-pool command MWC-47
gprs default radius-server command MWC-39
gprs fastswitch command MWC-18, MWC-34
gprs gtp n3-requests command MWC-19
gprs gtp path-echo-interval command MWC-19, MWC-22
gprs gtp t3-response command MWC-19
gprs maximum-pdp-context-allowed command MWC-19
gprs radius msisdn first-byte command MWC-40
graceful call termination, in MGCP VC-189
GRE (generic router encapsulation)
AppleTalk, tunneling IC-179
tunnel mode, configuring IC-179
GRE (generic routing encapsulation), tunneling IPC-423
group asynchronous interfaces, configuring DC-26
group code, LAT
condition specification BC-49
definition BC-48
filtering BC-49
lists BC-48
group-range command DC-8, DC-45
GRQ message
RAS VC-220
GSM (Global System for Mobile Communications), description MWC-11
GSN (GPRS Support Nodes), description MWC-12
GTP (GPRS Tunneling Protocol)
customizing MWC-19
description MWC-12
UDP checksum, (caution) MWC-33
GTS VC-170
GTS (Generic Traffic Shaping) VC-170
configuration (example) QC-225
configuring QC-223
how it works (figure) QC-215
monitoring QC-225
overview QC-214
guaranteed bandwidth, reserved flows
See RSVP
gw-accounting command VC-261, VC-379, VC-493
gw-accounting h323 command VC-258
gw-accounting h323 syslog command VC-260
gw-type-prefix command VC-311, VC-322
GZL (GetZoneList)
replies P2C-24
H
H.225.0 TCP timeout value
verifying (example) VC-239
H.235 security VC-219
H.235 security (example) VC-286, VC-362
H.245
empty capabilities set VC-226
software restrictions VC-236
H.245 tunneling
DTMF relay with fast connect VC-217
DTMF relay with fast connect
H.245 tunneling 1
H.323
applications VC-289
dynamic access control VC-300
gateway VC-201
disconnecting all calls (example) VC-363
disconnecting single call (example) VC-363
prerequisite tasks VC-237
services VC-289
signaling VC-229
terminal VC-201
traffic VC-289
Version 2
codec description VC-225
DTMF relay VC-216
fast connect
description 1
hookflash relay VC-217
redirect number information tunnel VC-215
software restrictions VC-235
H.323 gateway security
configuration (example) VC-284
H.323 inspection
multimedia protocol support SC-227
See also CBAC, H.323 inspection
H.323 signaling
description VC-229
H.323 signaling enhancement
software restrictions VC-235
H.323 support
virtual interfaces
configuration (examples) VC-288
H.323 Version 2
gatekeeper proxied access
configuring inbound or outbound VC-330
gatekeeper triggers
configuring with external applications VC-327
gatekeeper with external applications
configuring VC-325
gatekeeper zone list
configuring a prefix VC-326
H.450.3
call deflection
description VC-228
H.450 call transfer without consultation
configuring VC-246
H.450 configuration
gateway VC-239
h225 timeout tcp establish command VC-238
h323 asr command VC-339, VC-344, VC-351
h323 command VC-760
h323 gatekeeper command VC-335, VC-338, VC-343, VC-761
h323-gateway voip bind command VC-278
h323-gateway voip bind srcaddr VC-288
h323-gateway voip h323-id command VC-251, VC-271
h323-gateway voip id command VC-251, VC-270
h323-gateway voip interface command VC-251, VC-270
h323 h323-id command VC-334, VC-338, VC-343
h323 interface command VC-334, VC-338, VC-343, VC-351, VC-760
h323 qos command VC-335, VC-338, VC-343
h323 t120 command VC-761
hairpinning
See ISDN, dial peers
hairpinning, dial peer example VC-145
half-duplex command BC-403, BC-498, IC-34, IC-54, IC-146
half-duplex controlled-carrier command IC-146, IC-147
half-duplex DCE state machine
constant carrier mode IC-145
controlled-carrier mode IC-145
receive (figure) IC-146
transmit (figure) IC-145
half-duplex DTE state machine
receive (figure) IC-144
transmit IC-142
transmit (figure) IC-143
half-duplex mode
controlled-carrier and constant-carrier, changing modes IC-146
half-duplex timer command IC-147
half-duplex timer cts-delay command BC-403, IC-146
half-duplex timer cts-drop-timeout command IC-143
half-duplex timer dcd-drop-delay command IC-145
half-duplex timer dcd-txstart-delay command IC-145
half-duplex timer rts-drop-delay command IC-143
half-duplex timer rts-timeout command BC-403, IC-143
half-duplex timers, tuning IC-147
half-duplex timer transmit-delay command IC-142, IC-144
hardware-address command IPC-70
hardware break signal
generating FC-78
hardware clock FC-275
network time source, configuring as FC-276
setting manually FC-276
setting system clock FC-276
updating from NTP FC-271
hardware compression IC-89
See Frame Relay, payload compression
hardware flow control
configuring FC-86
hash algorithm
See IKE, algorithms
hashed queues, reserving QC-188
HCD (Hardware Configuration Definition)
channel subsystem BC-619
configuration BC-620
HDLC
encapsulation, default for serial interfaces IC-87
IEEE 802.10 XC-319
HDLC (High Level Data Link Control)
compression IC-90
HDLC (High-Level Data-Link Control)
encapsulation, ISO CLNS P3C-4
HDLC (High-Level Data-Link Control) encapsulation BC-341
HDLC (High-Level Data-Link Control) encapsulation, default for serial interfaces WC-266
headend LVC
definition XC-142
header compression, IPX P2C-121
header compression, X.25 TCP/IP WC-283
headers
compression VC-166
IP Tax VC-165
heartbeats
DXI 3.2 on SMDS WC-251
DXI 3.2 on SMDS with WC-14
hello BPDU intervals BC-51
hello packets P3C-76
AppleTalk, Enhanced IGRP P2C-48
DECnet, adjusting timers P3C-51
EIGRP
interval between IPC-267
valid time IPC-267
IPX Enhanced IGRP, intervals P2C-88
IPX Enhanced IGRP, timers P2C-88
IS-IS, advertised interval, setting IPC-276
ISO CLNS P3C-91
ES-IS, configuring interval P3C-91
Net/One P3C-121
OSPF, setting advertised interval IPC-225
VINES P3C-21
help
See context-sensitive help
help command FC-19
helper addresses
IP
(example) IPC-60
configuring IPC-32
IPX P2C-133
(example) P2C-179
hex input mode
See public key hex input configuration mode
high-density voice network module
voice-port configuration (example) VC-848
high-speed transport VC-171
High System Availability FC-431
hijacking, preventing SC-12
history size command FC-23
hit table count, clearing prefix list entries IPC-300
hold character
changing for session FC-78
setting for line FC-76
hold-character command FC-77
holddown
definition IPC-214
disabling, IGRP IPC-218
holding-time command XC-453
hold queue on ATM adapter
configuration (example) QC-158
configuring QC-141
verifying QC-141
hold queue size for X.25 WC-288
hold time
AppleTalk, Enhanced IGRP P2C-48
IPX, Enhanced IGRP P2C-88
hold time, EIGRP IPC-267
home agent redundancy, Mobile IP IPC-165
Home Agent services, enabling (Mobile IP) IPC-167
Hong Kong, ISDN Sending Complete information element DC-193, DC-272
hookflash
relay, description VC-217
hookflash relay
Foreign Exchange Station (FXS)
configuring VC-274
FXS
configuration (example) VC-287
hoot and holler
bandwidth planning VC-834
migration strategy VC-832
hoot and holler over IP
Cisco
combining with data networks VC-829
overview VC-827
restrictions VC-837
with one hoot group
configuration (example) VC-854
with two hoot groups VC-851
hop count, DECnet P3C-43, P3C-44
hops XC-167
hops-of-statistics-kept command FC-346
host command IPC-70
host configuration files
comparison with network configuration files FC-173
copying from an rcp server to startup configuration (example) FC-160, FC-162
description FC-173
loading from a server FC-175
host-failed message
displaying FC-98
host mobility, asynchronous IC-180
hostname command FC-260, SC-366, VC-507
host names
certification authority interoperability
configuring (example) SC-374
certification authority interoperability, configuring (examples) SC-366
setting FC-260
X.25 symbolic, configuring TC-135
host name table
VINES, displaying entries P3C-26
host numbers
Apollo Domain P3C-7
hosts
CMCC adapter configuration
channel rate BC-633
channel subsystem BC-619, BC-645, BC-676
description BC-619
HSAS stack BC-739
HSAS stack (examples) BC-762, BC-764, BC-765
IBM TCP/IP profile BC-646to BC-651, BC-738
IBM TCP/IP profile (examples) BC-760, BC-764
router correlation BC-620
VTAM local SNA major node BC-695
VTAM switched major node BC-679
VTAM TRL configuration BC-695
VTAM TRL major node BC-737
VTAM XCA major node BC-679to BC-690
communication XC-97
content and web XC-98
password management BC-586
router connectivity verification BC-590
hot LSC redundancy
See LSC
hot standby routing XC-124
hours-of-statistics-kept command FC-346
HPDT (High Performance Data Transfer), CMPC+ support BC-246, BC-727
HP hosts, on network segment (example) IPC-51
HP Probe Proxy, configuring name requests for IP IPC-18
HPR (High Performance Routing), CMPC
configuration BC-695
support BC-248, BC-674, BC-693
HSAS (High Speed Access Services), CMPC+
configuration
(examples) BC-761, BC-764, BC-765
tasks BC-739
OE parmlib member BC-762
HSRP
load sharing (example) IPC-125
preemption delay IPC-101
preempt lead router, configuring IPC-101
priority, setting IPC-101
HSRP (Hot Standby Router Protocol)
authentication IPC-101
burned-in-address IPC-101
enabling IPC-100
group attributes
customizing XC-329
home agent redundancy IPC-165
ICMP redirect messages, enabling IPC-104
MAC address IPC-101
MAC refresh interval IPC-101
MAC refresh interval (example) IPC-126
MIB IPC-102
MIB (example) IPC-127
MPLS VPNs, support for IPC-102
notifications IPC-102
over ISL encapsulation
configuration (example) XC-340
over ISL encapsulation, configuring XC-329
server load balancing IPC-139
SNMP traps and informs IPC-102
timers, setting IPC-101
traps IPC-102
TR LANE support XC-373
HSRP (Hot Standby Router Protocol), CPA channel interface tracking BC-633
HSSI (High-Speed Serial Interface)
1-port IC-84
encapsulation methods IC-85
Interface Processor (HIP)
Cisco 7000 series IC-83
Cisco 7500 series IC-83
on an ATM serial interface WC-94
VIP2 IC-84
hssi internal-clock command IC-85
HSSI line, invoking ATM over IC-85
HSSI network module
configuration (examples) IC-149
feature summary IC-84
prerequisite tasks IC-84
hub command IC-58
hub configuration mode
summary FC-400
hub ethernet command IC-60
hub ports
automatic receiver polarity reversal, enabling IC-58
configuration (examples) IC-79
enabling IC-58
link test function IC-58
router models IC-57
source address control, enabling IC-59
hub router IPC-196
ODR environment IPC-195
hunt groups VC-144
See rotary groups
huntstop command VC-146, VC-439
hw-module command DC-115
hybrid networks XC-99
hybrid switching environments
extending VLAN topology XC-321
I
IBGP session XC-155
IBM 3172, CMCC
adapter alternative BC-247, BC-674
internal adapter emulation BC-247, BC-674
IBM 3174, frame-copied errors BC-120
IBM 8209, bridges and SR/TLB routing devices BC-97
IBM channel types, CMCC adapter configuration BC-619
IBM unit types, CMCC adapter configuration BC-619
ICA traffic, classification by NBAR QC-33
ICMP (Internet Control Message Protocol)
(definition) FC-342
customizing services (example) IPC-120
ICMP mask reply messages, enabling IPC-81
ICMP redirect messages IPC-81
ICMP unreachable messages, enabling IPC-80
response time measuring FC-342
IDBLK definition, SDLLC configuration BC-445
identification support, configuring SC-413
idle command IPC-144
idle terminal message
configuring FC-97
idle time, TN3270 server configuration BC-796to BC-797
idle-time command BC-796, BC-808, BC-810
idle-timeout command WC-33
idle timers, MLP
dialer load thresholds DC-612
idle-voltage command VC-98
IDNUM definition, SDLLC configuration BC-445
IDP (initial domain part)
NSAP address field P3C-63
IDP (Internet Datagram Protocol)
characteristics P2C-4
IDS
See Cisco IOS Firewall IDS
IEEE 802.10
AppleTalk
encapsulation XC-349
connectivity between VLANs XC-319
description XC-319
HDLS serial interface XC-319
standard XC-349
IEEE 802.1Q
egress rules XC-314
encapsulation
BPDU reception XC-317
BPDU transmission XC-317
forwarding rules between ports XC-314
ingress rules XC-314
restrictions XC-353
IEEE 802.2, LLC encapsulation IC-34
IEEE 802.3, encapsulation IC-34
IEEE 802.5, Token Ring media IC-71
IEEE 802.5 committee BC-14, BC-84
IETF (Internet Engineering Task Force)
Frame Relay encapsulation WC-160, WC-207
See also Frame Relay, standards
IF-MIB FC-322
I-frames (information frames)
configuration (example) BC-405
controlling BC-394
rejected, resending BC-395
SDLC, largest size specification BC-404, BC-425
unacknowledged, resending BC-395
IFS (Cisco IOS File System)
commands FC-132
description FC-132
file copy FC-133
file viewing FC-132
URLs FC-133
prefixes (aliases) FC-134
IGMP (Internet Group Management Protocol)
See IP multicast routing, IGMP
ignore command VC-82
ignore-dcd command IC-100
ignore destination time, configuring WC-285
ignore lsa mospf command IPC-238
ignore-lsp-errors command P3C-80
IGP (Interior Gateway Protocol), supported protocols IPC-3
IGP destinations
neighbor autonomous systems, finding XC-34
IGP route label XC-110
IGRP (Interior Gateway Routing Protocol)
autonomous systems IPC-364
Cisco's implementation P2C-46
Cisco implementation IPC-213
configuration task list IPC-214
configuring IPC-213
enabling IPC-215
metrics, adjusting IPC-217
redistribution
(example) IPC-376
description IPC-364
route feasibility, determining IPC-216
route redistribution IPC-363
running with RIP IPC-206
source IP address, validating IPC-218
timers, adjusting IPC-217
traffic distribution, controlling IPC-216
transition to EIGRP IPC-260
unicast updates, allowing IPC-215
update broadcasts IPC-214
updates, frequency IPC-214
IGRP (Interior Gateway Routing Protocol), dial-in router DC-50
IKE (Internet Key Exchange) security protocol
access lists, configuring SC-382
algorithms
encryption SC-385
hash SC-385
options SC-384
anti-replay SC-379
authentication
connections, clearing SC-396
debug messages SC-396
description SC-332
DH (Diffie-Hellman) SC-379
group identifier, specifying SC-385
IKE policy parameter SC-383
disabling SC-382
enabling SC-382
extended authentication SC-392
configuring (examples) SC-392
purpose SC-392
feature SC-377
GGSN, configuring for MWC-41
group identifier, specifying SC-385
ISAKMP identity, configuring SC-387
keys
See keys, preshared
See keys, preshared; keys, preshared using AAA server; RSA keys
mode configuration SC-391, SC-392
negotiations SC-383
policies
configuring (example) SC-397
defaults, viewing SC-385
identifying SC-385
multiple SC-385
parameters SC-383, SC-384, SC-396
purpose SC-382
requirements SC-382
viewing SC-385
preshared keys using AAA server, configuring (example) SC-397
requirements
access lists SC-382
policies SC-382
RSA encrypted nonces method SC-386
RSA signatures method SC-386
SAs SC-380
supported standards SC-378
troubleshooting SC-396
tunnel endpoint discovery (TED)
description SC-393
restrictions SC-395
versions SC-394
See also IPSec; RSA encrypted nonces; SAs
ILMI (Integrated Local Management Interface)
ATM
(example) WC-101
configuring WC-29
management
(example) WC-105
configuring WC-41
ilmi manage command WC-42
IMA (inverse multiplexing over ATM)
bandwidth considerations WC-76
configuring WC-59
E1 IMA on Multiport T1/E1 ATM network module (example) WC-108
IMA groups, configuring WC-67
interface, configuring WC-59
interface configuration, verifying WC-63
supported platforms WC-56
T1 IMA on Multiport T1/E1 ATM network module (example) WC-111
T1 IMA on Multiport T1/E1 ATM port adapter (example) WC-112
troubleshooting WC-75
ima active-links-minimum command WC-68
ima clock-mode command WC-68
ima differential-delay-maximum command WC-68
image encoding command VC-694
image resolution command VC-694
images
boot image FC-178
compressed FC-199
reloads, scheduling FC-234
TFTP server
copying from FC-188
See also system images; boot images
ima-group command WC-60
ima test command WC-68
impedance command VC-97
import all command IPC-72
import target communities XC-154
improving quality of service (QoS)
voice multicasting over Frame Relay (example) VC-850
in-band framing mode control messages, configuring DC-84
inbound dial peers
IVR applications VC-140
matching VC-139
inbound resets, BGP IPC-291
incoming called-number command VC-130, VC-133, VC-144, VC-693, VC-880
incoming-called-number command VC-225
incoming message banners
(example) FC-115
configuring FC-100
info-only command VC-327
information-type fax command VC-693, VC-696
ingress edge device XC-439
ingress label switching router XC-172
ingress label switching router, function XC-115
initial configuration dialog
See Setup command facility FC-62
initiate-to command DC-535, DC-537
input gain command VC-97
input interface, configuring the rate limit XC-173
input notification
setting FC-85
input packet size, setting WC-271
input window size, setting WC-271
insecure command FC-87
inservice (real server) command IPC-143
inservice (virtual server) command IPC-144
inspection rules SC-236
See CBAC, inspection rules
integrated routing and bridging on IP traffic
enabling IP bridging IPC-30
integrated routing and bridging on IPX
enabling P2C-84
interfaces P2C-84
integrated service models, defined QC-4
intelligent queueing mechanisms
Controlled Load Service QC-4
guaranteed rate service QC-4
interarea router
See Level 2 router
interarea routing, DECnet P3C-44
interautonomous systems, definition XC-106
interdomain routing, ISO IGRP P3C-68
interface atm command VC-728, VC-739, VC-755, WC-18, WC-27, WC-132, WC-133, XC-446, XC-453, XC-458
ILMI PVCs and signaling, setting up XC-379, XC-384to XC-387
interface ATM for multi-VC mode, configuration (example) XC-222
interface bri command DC-187, DC-203, DC-233, DC-447, VC-591, VC-601
interface bvi command BC-39
interface cbr command WC-88, WC-89, WC-91
interface channel command BC-632, BC-652, BC-681
interface channel configuration mode
description FC-400
interface command BC-31, BC-148, BC-151, DC-650, FC-14, IC-178, MWC-25, MWC-34, P2C-28, P2C-36, QC-70, SC-195, VC-251, VC-278, VC-333, VC-337, VC-338, VC-339, VC-342, VC-343, VC-344, VC-345, VC-759, VC-838, WC-200, XC-70, XC-72, XC-325, XC-329, XC-330, XC-332, XC-333, XC-335, XC-336, XC-337, XC-338, XC-351, XC-355, XC-356, XC-357, XC-446
LAPB WC-260
interface configuration mode
description FC-14
submodes (list) FC-401
summary FC-18
interface ctunnel command IC-181, P3C-103
interface dialer command DC-429, DC-447, DC-448, DC-460, DC-612, DC-638
interface ethernet command IC-33
use in AutoInstall FC-52
interface fastethernet command IC-33, IC-36, IC-49, XC-357, XC-358
interface fddi command BC-89, IC-53
use in AutoInstall FC-52
interface gigabitethernet command IC-33
interface hssi command IC-84
interface IP address, specifying WC-165
interface lex command IC-64
interface loopback command IC-170
interface multilink command DC-619
interface null command IC-174
interface point-to-point command WC-193
interface port-channel command IC-48
interface POS3/0/0 XC-220
interface pos command IC-126, IC-132
interfaces
asynchronous
configuration options DC-7
configuring DC-6
description DC-26
logical constructs DC-8
MLP DC-611
ATM IC-83
bridging priority configuration BC-50
circuit type, IS-IS, setting IPC-278
compared to lines DC-7
configuration (examples) IC-149
DDR priority DC-409
DECnet costs P3C-36
dial backup dialer profiles DC-459, DC-463
description of DC-10
downtime, enabling DC-404
serial address DC-398
dialer rotary group assignment DC-400
enabling CDP on FC-329
Ethernet IC-31
group asynchronous, configuring DC-26
high-speed transport VC-171
IP addresses
assigning multiple IPC-9
primary IPC-8
secondary IPC-9
LAN Extender IC-60
lines, relationship to DC-18
loopback interface, emulating an interface IC-169
low-speed serial DC-150, IC-142
async commands supported IC-148
configuring IC-142
constant-carrier mode IC-147
controlled-carrier mode IC-147
half-duplex DCE state machine IC-144
half-duplex DTE state machine IC-142
sync commands supported IC-148
synchronous or asynchronous, setting IC-148
null IC-174
path cost, assigning BC-51
peer address allocation methods DC-603
physical DC-428
dialer pool, configuring DC-427
point-to-point, IP address pooling DC-603
priority groups, assigning QC-167
queueing priority, assigning QC-161
serial encapsulation types DC-21
serial interfaces DC-21
spanning-tree group, assigning BC-28
synchronous
MLP DC-610
synchronous serial IC-86
Token Ring IC-71
tunnel IC-178
types IC-2
unnumbered DC-150
virtual asynchronous DC-201
virtual templates, configuring DC-635, TC-127, TC-129
virtual templates, description of DC-9
XNS routing P3C-124
interfaces, specifying WC-193
interface serial command BC-365, BC-366, DC-203, DC-267, DC-286, DC-447, DC-448, DC-752, IC-64, IC-87, IC-121, IC-123, IC-161, VC-245, VC-599, VC-725, VC-729, VC-737, VC-798, WC-94
backup interfaces WC-194
Frame Relay subinterfaces WC-190
LAPB WC-264
SVCs WC-165
use in AutoInstall FC-53
X.25 subinterfaces WC-278
interface serial multipoint command WC-251
interface srp command IC-130
interface tokenring command IC-73, P3C-38
use in AutoInstall FC-52
interface tunnel command IC-178, IC-179, IPC-501, MWC-31, P2C-28, P2C-30
IP encapsulation of AppleTalk P2C-36
interface types, available for ATM WC-6
interface vg command IC-42
interface virtual-template command DC-483, DC-486, DC-496, DC-498, DC-635, MWC-18, MWC-34, TC-127, TC-129, WC-121
interface vlan command BC-177, BC-178, BC-179
Interior Gateway Routing Protocol
internal adapter configuration mode, description FC-400
internal adapters
See CMCC internal adapters BC-616
internal clock, enabling IC-99
internal LAN configuration mode
description FC-401
internal LANs
See CMCC internal LANs
internal traffic
definition XC-30
TMS collection, enabling XC-41
international bit command IC-121
international character sets
configuring default FC-81
supporting FC-82
International Telecommunication Union Standardization Sector (ITU-T) X.25 recommendation WC-15
Internet XC-97
Internet Router software, requirements P2C-11
internodal BPX connections XC-140
interprovider VPNs
definition XC-107
intervals
forward delay BC-51
hello BPDU BC-51
maximum idle BC-52
inter-VLAN communication XC-313
intra-area router
See Level 1 router
intra-area routing, DECnet P3C-43
intranet XC-98
intrusion detection
See Cisco IOS Firewall IDS
I Number
and Enhanced Voice Services for Japan VC-861
Inverse ARP (Inverse Address Resolution Protocol)
ATM
(example) WC-100
configuring WC-47
PVCs, configuring WC-23
dynamic address mapping WC-160
subinterfaces WC-191
See also Frame Relay, Inverse ARP
inverse DNS nailing, TN3270 server
(examples) BC-841
configuration BC-811
description BC-775
verification BC-823
inverse multiplexing
MLP (example) DC-627
invert data command IC-99, IC-121
invert rxclock command IC-99
IOCP (Input/Output Control Program)
channel types BC-624
configuration
channel rate BC-633
channel subsystem BC-619
channel types BC-619
control unit statements (example) BC-622
ESCON director BC-619
unit types BC-619
IODEVICE address configuration
device argument, router BC-623to BC-624
unit address BC-624
IOS
See Cisco IOS
IOS File System
See IFS (Cisco IOS File System)
IOS images
system FC-178
IP
access lists
(caution) IPC-89
dynamic, deleting SC-199
extended, applying time ranges IPC-96
extended, creating IPC-86, IPC-89
fragment control
IP
access lists
extended IPC-92implicit deny when no match found IPC-89, IPC-92
implicit masks (example) IPC-122
inbound or outbound interfaces, applying on IPC-98
interface, applying to IPC-97
named, creating IPC-89
reflexive SC-201
standard, creating IPC-86, IPC-89
undefined IPC-98
violations IPC-107
violations, accounting IPC-88, IPC-107
violations, logging IPC-91
violations, log-input IPC-91
virtual terminal lines, setting on IPC-98
accounting, configuring IPC-107
classes IPC-7
defining XC-329
domain name, specifying IPC-16
helper IPC-32
(example) 1
description 1
helper (example) IPC-60
interfaces, assigning to IPC-7
list of reserved (table) IPC-8
mapping logical names to IPC-15
multiple IPC-9
multiple, assigning IPC-9
primary IPC-8
addressing monitoring tasks IPC-47
address pooling TC-133
assignment method DC-604
concept DC-603
DHCP DC-605
global default mechanism DC-605to DC-606
interfaces supported DC-604
local address pooling DC-606
peer address allocation methods DC-603
per-interface options DC-606
precedence rules DC-604, DC-638
address resolution IPC-12
administrative distances, defaults IPC-358
advertising, definition IPC-199
ATM
(example) WC-105
configuration (example) WC-106
configuring WC-45, WC-46, WC-47
authentication keys IPC-371
bridge disabling BC-41
broadcast flooding (example) IPC-60
broadcasting (example) IPC-59
broadcasts
and transparent bridging spanning-tree protocol IPC-33
directed IPC-31
types IPC-31
broadcasts, asynchronous serial traffic over UDP DC-171
Cisco Easy IP
configuration (examples) DC-479
configuring DC-476
default gateway
definition IPC-28
enabling IPC-28
dial addressing schemes
Cisco Easy IP DC-781
classic IP DC-781
remote client DC-781
remote LAN DC-781
directed broadcasts IPC-31
domains, establishing (example) IPC-51
dynamic access list IPC-88, IPC-91
enabled state XC-220
encryption SC-12
fast switching
DDR DC-376
legacy DDR DC-406
flow cache XC-72
header compression for Frame Relay WC-202
helper address
(example) IPC-60
configuring IPC-32
integrated routing and bridging IPC-30
inter-VLAN communication XC-321
IP-SLIP (example) DC-46
LAT-to-LAT protocol translations, configuring TC-156
local-area mobility
configuring IPC-15
redistributing routes IPC-15
local policy routing IPC-371
metric translations IPC-363
monitoring tasks IPC-117
for IP routing IPC-373
multicast XC-98
multicast address, SMDS address mapping to WC-247
multicasting, configuring WC-34
multicast routing
See IP multicast routing
named access lists IPC-89
name server, specifying IPC-17
overview, WAN WC-9
packets XC-113, XC-114, XC-167
setting XC-116
performance parameters IPC-109
performance parameters, configuring DC-584
PIM
See IP multicast routing, PIM
policy routing IPC-367, IPC-370
fast switched IPC-371
PPP, configuring over DC-578
PPP-IP (example) DC-47
(table) IPC-369
assignments XC-223
setting XC-223
primary address IPC-8
processing on
serial interfaces IPC-11
tunnel interfaces IPC-11
protocol, description IPC-1
route cache invalidation DC-587
route cache invalidation, controlling XC-17
routing
assistance when disabled IPC-28
enabled by default IPC-27
over simplex Ethernet interface IPC-83
routing and bridging BC-41
routing processes, maximum number IPC-4
routing protocols, choosing IPC-30
secondary addresses IPC-9
security
See also lock-and-key; TCP Intercept SC-192
session filtering
See Reflexive Access Lists
SMDS
configuring WC-249
SNA integration BC-1
See also SNA-to-IP integration
source-route header options, configuring IPC-82
split horizon, enabling and disabling IPC-207, IPC-219
split horizon, X.25 default WC-278
static routing redistribution (example) IPC-376
subnets, defining XC-329
subnet zero, enabling IPC-9
TCP headers, compressing IPC-110
TCP performance parameters IPC-109
TR LANE support XC-373
UDP broadcasts, enable forwarding of IPC-32
UDP datagrams
flooding IPC-34
speeding up flooding IPC-34
unnumbered XC-174
WANs, configuring over IPC-114
IP (Internet Protocol)
tunneling IC-174
tunneling (examples) IC-183
IP, AppleTalk-to-IP address mapping P2C-35
IP/TV access VC-831
IP/VC 3510 multipoint control unit
with Cisco IOS gatekeeper/proxy
configuration (example) VC-771
ip access-group command IPC-98, SC-195, VC-342, VC-345
ip-access-group command MWC-28
ip access-list command IPC-90
ip accounting command IPC-107
ip accounting-list command IPC-108
ip accounting mac-address command IPC-108
ip accounting precedence command IPC-109
ip accounting-threshold command IPC-108
ip accounting-transits command IPC-108
ip address (secondary) command IPC-9
IP address, CTunnel destination IC-181
IP address, to a CTunnel destination, assigning P3C-103
ip address command BC-148, BC-177, BC-654, DC-212, DC-477, DC-609, DC-612, DC-619, FC-54, IC-48, IC-64, IPC-232, MWC-18, MWC-25, MWC-31, P2C-36, VC-270, VC-338, VC-339, VC-343, VC-344, VC-739, VC-838, WC-18, XC-329
primary IP address, setting IPC-8
SMDS WC-251
ip address dhcp command IPC-71
IP addresses
configuration, CMCC adapter BC-654, BC-659, BC-739
multihomed, TCP/IP offload BC-642
IP addresses, static IPC-65
ip address negotiated command DC-478
ip address-pool command DC-605, DC-606, MWC-45, TC-133
ip-address-pool command MWC-29, MWC-48
ip alias command TC-17
ip as-path access-list command DC-867, QC-49
ip authentication key-chain eigrp command IPC-266
ip authentication mode eigrp command IPC-265
ip bandwidth-percent eigrp command IPC-260
ip bgp-community new-format command IPC-306, QC-48
ip bootp server command FC-261
IP bridging, enabling IPC-30
ip broadcast-address command IPC-33
ip cache-invalidate-delay command DC-587, XC-18
ip casa command IPC-117
IPC connections, VINES P3C-26
ip cef accounting command XC-41
ip cef command IPC-115, VC-250, XC-38, XC-147, XC-177
ip cef load-sharing algorithm original command XC-40
ip cef load-sharing algorithm tunnel command XC-40
ip cef load-sharing algorithm universal command XC-40
ip cef table consistency-check command XC-48
ip cef traffic-statistics command IPC-24
ip cgmp command IPC-434
ip classless command IPC-11
ip community-list command IPC-305, QC-48
IPCP
See IP-PPP
ip default-gateway command IPC-28
ip default-network command IPC-360
ip dhcp conflict logging command IPC-67
ip dhcp database command IPC-67
ip dhcp excluded address command MWC-46
ip dhcp excluded-address command IPC-67
ip dhcp ping packets command IPC-71
ip dhcp ping timeout command IPC-71
ip dhcp pool command IPC-67, IPC-70, MWC-46
ip dhcp relay information check command IPC-73
ip dhcp relay information policy command IPC-73
ip dhcp-server command DC-605, MWC-45
ip dhcp smart-relay command IPC-73
ip directed-broadcast command IPC-32
ip-directed broadcast command DC-212
ip domain list command IPC-16
ip domain-lookup nsap command IPC-17, P3C-86
ip domain-name VC-307
ip domain name command IPC-16
ip domain-name command BC-638, SC-366, VC-507
ip drp access-group command IPC-84
ip drp authentication key-chain command IPC-84
ip drp server command IPC-84
IP DSCP (differentiated services code point) value
configuration (example) QC-67
configuring QC-64
ip dvmrp accept-filter command IPC-531
ip dvmrp auto-summary command IPC-534
ip dvmrp default-information command IPC-532
ip dvmrp metric command IPC-530
ip dvmrp metric mbgp command IPC-349
ip dvmrp metric-offset command IPC-534
ip dvmrp reject-non-pruners command IPC-536
ip dvmrp routehog-notification command IPC-533
ip dvmrp route-limit command IPC-533
ip dvmrp summary-address command IPC-534
ip dvmrp unicast-routing command IPC-533
IP Enhanced Interior Gateway Routing Protocol
See EIGRP IPC-257
ip flow-aggregation cache destination-prefix command XC-74
ip flow-aggregation cache prefix command XC-74
ip flow-aggregation cache source-prefix command XC-74
ip flow-cache entries command IPC-116, XC-71
ip flow-export command XC-71, XC-73
ip forward-protocol command IPC-32
ip forward-protocol spanning-tree command IPC-34
ip forward-protocol turbo-flood command IPC-34
ip ftp passive command FC-255
ip ftp password command BC-638, FC-193, FC-255
ip ftp source-interface command FC-255
ip ftp username command BC-638, FC-193, FC-255
IP header compression
See TCP/IP, header compression
ip hello-interval eigrp command IPC-267
ip helper-address command FC-53, IPC-32
ip hold-time eigrp command IPC-267
IP host backup
CLAW configuration BC-661
configuration
description BC-661
description BC-644
path configuration BC-662
TCP/IP offload configuration BC-661
IP host backup configuration submode FC-402
ip host command DC-142, IPC-16, VC-507
ip hp-host command IPC-18
ip http access-class command FC-119
ip http authentication command FC-118
ip http port command FC-119
ip http server command FC-118
ip icmp rate-limit unreachable command IPC-80
ip igmp access-group command IPC-403
ip igmp helper-address command IPC-435
ip igmp join-group command IPC-116, IPC-403, IPC-407
ip igmp mroute-proxy command IPC-504
ip igmp proxy-service command IPC-504
ip igmp query-interval command IPC-404, IPC-405, IPC-407
ip igmp query-max-response-time command IPC-407
ip igmp query-timeout command IPC-405, IPC-407
ip igmp static-group command IPC-408
ip igmp unidirectional-link command IPC-502
ip igmp v3lite command IPC-461
ip igmp version command IPC-404
ip inspect audit trail command SC-246
ip inspect command SC-240
ip inspect dns-timeout command SC-235
ip inspect max-incomplete high command SC-235
ip inspect max-incomplete low command SC-235
ip inspect name command SC-237
ip inspect one-minute high command SC-235
ip inspect one-minute low command SC-235
ip inspect tcp finwait-time command SC-235
ip inspect tcp idle-time command SC-235
ip inspect tcp max-incomplete host command SC-235
ip inspect tcp synwait-time command SC-235
ip inspect udp idle-time command SC-235
ip irdp command IPC-29
ip load-sharing per-packet command XC-40
ip local policy route-map command IPC-371, QC-46
ip local pool command DC-606, DC-607, TC-133
ip local pool default command DC-635
ip mask-reply command IPC-81
ip mobile arp command IPC-15
ip mobile foreign-agent command IPC-168
ip mobile foreign-service command IPC-168
ip mobile home-agent address command IPC-172
ip mobile home-agent command IPC-167
ip mobile home-agent standby command IPC-173
ip mobile host command IPC-168
ip mobile secure command IPC-168
ip mobile virtual-network command IPC-167
ip mrm accept-manager command IPC-514
ip mrm command IPC-514
ip mrm manager command IPC-516
ip mroute-cache command IPC-409, XC-2
ip mroute command IPC-424
ip msdp border sa-address command IPC-476, IPC-480
ip msdp cache-sa-state command IPC-474
ip msdp default-peer command IPC-479
ip msdp filter-sa-request command IPC-476
ip msdp mesh-group command IPC-479
ip msdp originator-id command IPC-480
ip msdp peer command IPC-474
ip msdp sa-filter in command IPC-477
ip msdp sa-filter out command IPC-477
ip msdp sa-request command IPC-475
ip msdp ttl-threshold command IPC-477
IP multicast
DLSw BC-282
IP multicast and digital signal processor (DSP)
arbitration and mixing VC-834
ip multicast boundary command IPC-414, IPC-432
ip multicast cache-headers command IPC-434
ip multicast default-rpf-distance command IPC-503
IP multicast heartbeat
(example) IPC-452
description IPC-441
ip multicast heartbeat command IPC-441
ip multicast helper-map command IPC-433
IP multicast MLS
complex sample network topology (figure) XC-287
components XC-261
configuration (example) XC-284, XC-286
configuring and monitoring XC-281
enabling XC-282
flow mask XC-262
flows
completely and partially switched XC-263
forwarding table XC-261
Layer 2 forwarding table XC-261
Layer 3 MLS cache XC-261
Layer 3 switching information, displaying XC-283
management interface XC-283
MLSP XC-283
packet rewrite XC-262
PIM, enabling XC-282
prerequisites XC-279
restrictions
access lists XC-281
external routers XC-281
routers XC-280
sample network topology (figure) XC-284
source-destination-vlan flow mask XC-262
topologies XC-259
ip multicast multipath command IPC-436
ip multicast rate-limit command IPC-424
IP multicast routing
ATM, idling policy IPC-431
ATM point-to-multipoint SVC, over IPC-430
Auto-RP
cache, clearing IPC-440
configuring IPC-400
mapping agent IPC-401
BSR (bootstrap router) IPC-411
CGMP
clearing IPC-440
enabling IPC-434
proxy IPC-434
debug messages, logging IPC-409
designated router IPC-419
diagnostic tool IPC-513
DVMRP
automatic summarization IPC-534
description IPC-396
interoperability IPC-530
mrouted protocol IPC-530
peering with neighbors IPC-535
reject nonpruning neighbors IPC-536
route hog notification IPC-533
routes
advertising 1
clearing 1
route threshold IPC-533
summary address IPC-534
unicast routing IPC-533
enabling on all interfaces to the services manager IPC-116
enabling on router IPC-397
fast switching IPC-409
functional addresses IPC-410
heartbeat, monitoring IPC-441
IGMP
cache, deleting entries from IPC-440
DR election process IPC-404
enabling IPC-397
helper address IPC-435
host-query messages IPC-404
querier election process IPC-405
query response time IPC-407
query timeout IPC-405, IPC-407
SSM IPC-406
statically connected router member IPC-408
version, changing IPC-404
Version 1 IPC-404
Version 2 IPC-405
Version 3 IPC-405
IP multicast routing table
clearing IPC-440
displaying IPC-440
join message IPC-396
load splitting
(example) IPC-451
across tunnels IPC-436
configuration tasks IPC-437
native IPC-436
MDS
configuration (example) XC-3
description XC-1
global enabling XC-2
interface, enabling on an XC-2
interface status, displaying XC-3
line card packet counts, clearing XC-2
line card packet counts, displaying XC-3
MFIB table, clearing XC-2
MFIB table, displaying XC-3
MFIB table summary, displaying XC-3
packet statistics, displaying XC-3
switched packet counts, displaying XC-3
monitoring tasks IPC-439
mrinfo requests IPC-530
MRM
(example) IPC-518
beacon messages IPC-516
description IPC-513
Manager restrictions IPC-514
multiple groups IPC-515
status report
cache buffer, clearing 1
displaying 1
requests 1
test, conducting IPC-516
test information, displaying IPC-517
test name IPC-516
Test Receiver
information, displaying 1
interface 1
parameters 1
Test Sender
information, displaying 1
interface 1
parameters 1
UDP port numbers IPC-516
mroute IPC-423
mrouted
advertising routes IPC-532
description IPC-530
tunnel interface destination address IPC-531
MSDP
benefits IPC-473
enabling IPC-474
overview IPC-471
peer, configuring IPC-474
prerequisites IPC-473
multicast groups
controlling host access to IPC-403
displaying IPC-440
joining IPC-403
multicast information, displaying IPC-440
overview IPC-393
packet headers, storing IPC-434
peering IPC-535
PGM
See also IP multicast routing, PGM Host
See also IP multicast routing, PGM Router Assist
PGM Host
(examples) IPC-494
configuring IPC-489
description IPC-487
monitoring and maintaining IPC-493
overview IPC-487
verifying IPC-490
PGM Router Assist
(examples) IPC-494
configuring IPC-492
description IPC-487
monitoring and maintaining IPC-494
overview IPC-487
Reliable Transport Protocol IPC-489, IPC-492
TSI IPC-494
PIM
bidirectional mode
description 1
enabling 1
packet forwarding 1
bidirectional shared trees IPC-468
border router (example) IPC-444
dense mode
enabling 1
dense mode, description IPC-396
dense mode state refresh
(example) 1
configuring 1
description 1
description IPC-395
designated forwarder (DF) IPC-467
filtering IPC-435
information, displaying IPC-440
maximum number of VCs IPC-430
NBMA
mode, enabling 1
network 1
neighbors, displaying IPC-441
preventing IPC-435
proxy registering, enabling IPC-421
registering process IPC-420
register messages
configuring IP source address 1
limiting rate 1
shortest path tree, delaying use IPC-418
sparse-dense mode, enabling IPC-398, IPC-413
sparse mode
border interface 1
description 1
router-query messages 1
version, setting IPC-413
Version 2 IPC-411
PIM sparse mode, enabling IPC-398
prune message IPC-396
pruning IPC-407
RGMP
(example) IPC-526
configuration tasks IPC-524
description IPC-520
monitoring and maintaining IPC-525
prerequisites IPC-523
verifying IPC-524
RP (rendezvous point)
address, configuring IPC-400
Auto-RP
groups covered 1
mapping agent 1
displaying IPC-441
filter RP announcements IPC-402
group-to-RP mapping, displaying IPC-402
PIM Version 2 IPC-411
RP-mapping agent IPC-402
to a group, assigning IPC-419
RPF (Reverse Path Forwarding), description IPC-418
RTP header compression IPC-424
SAP
displaying cache IPC-441
limiting cache IPC-410
listener support IPC-409
shared tree IPC-416
shortest-path tree IPC-417
source tree IPC-417
SSM
description IPC-453
filtering (example) IPC-462
IGMPv3
(example) 1
description 1
IGMP v3lite
(example) 1
description 1
IP address range IPC-454
operation of IPC-454
URD
(example) 1
description 1
statically connected member IPC-407
static routes IPC-423
stub multicast routing
(example) IPC-450
description IPC-434
switched packet counts, displaying XC-3
testing IPC-513
Token Ring, over
(example) IPC-443
description IPC-410
Token Ring MAC address mapping IPC-411
TTL threshold IPC-409
UDLR
back channel IPC-498
description IPC-497
IGMP
configuring 1
description 1
IGMP proxy
configuring 1
description 1
tunnel
ARP and NHRP 1
configuring 1
description 1
IP multicast routing, asynchronous serial traffic over UDP DC-171
IP multicast routing, RTP header compression QC-317
ip multicast routing command IPC-116
ip multicast-routing command IPC-397, XC-2
ip multicast ttl-threshold command IPC-409
ip multicast use-functional command IPC-411
ip name-server command BC-638, IPC-17, VC-307
ip nat command IPC-38, IPC-39, IPC-41, IPC-43, IPC-45
ip nat inside command DC-477
ip nat inside destination command IPC-45
ip nat inside source command IPC-38, IPC-39, IPC-40, IPC-41, IPC-43, IPC-45
ip nat outside command DC-478
ip nat pool command IPC-38, IPC-39, IPC-43
ip nat service skinny tcp port command IPC-47
ip nat translation command IPC-45, IPC-46
ip nat translation timeout command IPC-45
ip nbar port-map command QC-76
ip nbar protocol-discovery command QC-76
ip netmask-format command IPC-48
ip nhrp authentication command IPC-22
ip nhrp holdtime command IPC-26
ip nhrp interest command IPC-22
ip nhrp map command IPC-21, IPC-49
ip nhrp max-send command IPC-25
ip nhrp network-id command IPC-21
ip nhrp nhs command IPC-21
ip nhrp record command IPC-26
ip nhrp responder command IPC-26
ip nhrp server-only command IPC-27
ip nhrp trigger-svc command IPC-24
ip nhrp use command IPC-23
ip ospf authentication command IPC-226
ip ospf authentication-key command IPC-225
ip ospf cost command IPC-225
ip ospf dead-interval command IPC-225
ip ospf demand-circuit command IPC-234
ip ospf flood-reduction command IPC-238
ip ospf hello-interval command IPC-225
ip ospf message-digest-key command IPC-226
ip ospf name-lookup command IPC-232
ip ospf network command IPC-227, IPC-228
ip ospf priority command IPC-225
ip ospf retransmit-interval command IPC-225
ip ospf transmit-delay command IPC-225
IP packet fragmentation
See CBAC, IP packet fragmentation
ip pgm host command IPC-490
ip pgm router command IPC-492, IPC-493
ip pim accept-rp command IPC-419
ip pim bsr-border command IPC-414
ip pim bsr-candidate command IPC-414
ip pim command IPC-398, IPC-399, VC-838
ip pim minimum-vc-rate command IPC-431
ip pim multipoint-signalling command IPC-430
ip pim nbma-mode command IPC-422
ip pim neighbor-filter command IPC-435
ip pim query-interval command IPC-419
ip pim register-rate-limit command IPC-421
ip pim register-source command IPC-421
ip pim rp-address command IPC-419, IPC-469
ip pim rp-announce-filter command IPC-402
ip pim rp-candidate command IPC-469
ip pim rpr-candidate command IPC-414
ip pim send-rp-announce command IPC-401, IPC-469
ip pim send-rp-discovery command IPC-402
ip pim spt-threshold command IPC-418
ip pim ssm command IPC-461
ip pim state-refresh disable command IPC-399
ip pim state-refresh origination-interval command IPC-399
ip pim vc-count command IPC-430
ip pim version command IPC-413
ip policy route-map command IPC-367, QC-45
ip port-map command SC-325
IP-PPP, enabling DC-578
IP Precedence VC-167
TN3270 server configuration BC-797
IP precedence
bit values, displaying QC-297
CAR QC-205
configuration (example) QC-67
configuring QC-64
overview QC-22
packet classification QC-22
queueing mechanisms used QC-244
RSVP-ATM QoS Interworking feature QC-250
setting QC-244
signaling QC-243
ToS field QC-22
values (table) QC-23
VC bundle members QC-349
where used QC-22
WRED QC-186
ip precedence (TN3270) command BC-797, BC-809, BC-810
IP precedence, setting XC-223
ip precedence command VC-841
ip prefix-list command IPC-297
ip probe proxy command IPC-18
ip proxy-arp command IPC-14
ip rarp-server command FC-248
ip rcmd domain-lookup command FC-250
ip rcmd rcp-enable command FC-253
ip rcmd remote-host command FC-251, FC-253
ip rcmd remote-username command FC-254
ip rcmd rsh-enable command FC-251
ip rcmd source-interface command FC-250
ip redirects command IPC-81
ip rgmp command IPC-524
ip rip authentication command IPC-203
ip rip authentication mode command IPC-203
ip rip receive version command IPC-202
ip rip send version command IPC-202
ip rip triggered command IPC-208
ip route-cache cef command XC-38
ip route-cache command BC-655, DC-376, DC-406, DC-586, MWC-25, MWC-34, VC-335, WC-122, WC-252, XC-14, XC-15, XC-2
ip route-cache command, for policy routing IPC-371
ip route-cache distributed command DC-376, DC-406, XC-72, XC-335
ip route-cache flow command XC-70, XC-72
ip route-cache policy command QC-45
ip route-cache same-interface command VC-759, XC-14
ip route command DC-679, IPC-358, MWC-26
IP route summarization (RIP), verifying IPC-205
ip routing command BC-41, BC-148, BC-177, DC-435, IPC-27, VC-759, XC-335
IP routing over IEEE 802.1Q in VLANs
configuration (example) XC-359
ip rsvp atm-peak-rate-limit command QC-296
ip rsvp bandwidth command QC-265, QC-294
ip rsvp burst policing command QC-276
ip rsvp dsbm candidate command QC-308
ip rsvp dsbm non-resv-send-limit command QC-308
ip rsvp flow-assist command QC-267
ip rsvp neighbor command QC-267
ip rsvp policy cops command QC-304
ip rsvp policy cops minimal command QC-304
ip rsvp policy cops report-all command QC-305
ip rsvp policy cops servers command QC-304
ip rsvp policy cops timeout command QC-305
ip rsvp policy default-reject command QC-304
ip rsvp pq-profile command QC-276
ip rsvp precedence command QC-268
ip rsvp reservation command QC-266
ip rsvp reservation-host command QC-266
ip rsvp sender command QC-266
ip rsvp sender-host command QC-266
ip rsvp svc-required command QC-294
ip rsvp tos command QC-268
ip rsvp udp-multicasts command QC-267
ip rtp compression-connections command IPC-427, QC-339, QC-342
ip rtp header-compression command IPC-426, QC-338
IP RTP Priority VC-169
bandwidth allocation QC-94
configuration (example) QC-148
configuring QC-127
overview QC-93
restrictions QC-95
ip rtp priority command QC-93, QC-127
ip rtp reserve command QC-323
IPS (Intelligent Protection Switching)
configuring IC-130
ip sap cache-timeout command IPC-410
ip sap listen command IPC-410
IPSec (IPSec network security protocol)
access lists SC-339
requirements SC-341
benefits SC-331
CAs
implementing with SC-363, SC-364
implementing without SC-362, SC-364
CBAC compatibility SC-229
configuration
(example) SC-358
configuring SC-357
crypto access lists SC-342
any keyword, using SC-346
creating SC-343
manually established SAs SC-344
mirror images SC-345
purpose SC-343
tips SC-343
crypto maps
applying SC-356
dynamic
adding 1
definition 1
entries, creating SC-349to SC-356
purpose SC-349
quantity SC-350
encapsulations supported SC-338
feature SC-333
GGSN
configuration (example) MWC-59
configuring on MWC-40to MWC-44
hardware supported SC-337
how it works SC-339
monitoring SC-357
multiple peers SC-340
NAT, configuring SC-339
network services SC-12, SC-333
prerequisites SC-340
protocol SC-334
requirements for SAs SC-380
restrictions SC-338
SAs
clearing SC-348
IKE negotiations SC-339, SC-352
manual negotiations SC-339, SC-350
supported standards SC-334
switching paths supported SC-337
traffic protected, defining SC-339
transforms SC-336
transform sets SC-347
configuring (example) SC-374
tunnel endpoint discovery
See IKE, tunnel endpoint discovery
ip security add command SC-424
ip security aeso command SC-426
ip security dedicated command SC-424
ip security eso-info command SC-426
ip security eso-max command SC-426
ip security eso-min command SC-426
ip security extended-allowed command SC-424
ip security first command SC-425
ip security ignore-authorities command SC-424
ip security implicit-labelling command SC-424
ip security multilevel command SC-424
ip security reserved-allowed command SC-425
ip security strip command SC-424
ip slb dfp command IPC-145
ip slb serverfarm command IPC-141
ip slb vserver command IPC-143
IPSO (IP Security Option)
(examples) SC-428
basic SC-424
basic security classifications SC-424
AESOs, attaching SC-426
configuration tasks SC-426
ESOs, attaching SC-426
global defaults SC-426
ip source-route command IPC-83
ip split-horizon command IPC-207, IPC-219
ip split-horizon eigrp command IPC-267
ip subnet-zero command IPC-10
ip summary-address eigrp command IPC-263
ip summary-address rip command IPC-204, IPC-205
IPTalk
/etc/services file P2C-36
AppleTalk-to-IP address mapping P2C-35
configuration (example) P2C-72to P2C-75
description P2C-33
IP encapsulation P2C-37
SLIP drivers P2C-33
UDP port numbers P2C-36
ip tcp chunk-size command IPC-113, TC-17
ip tcp compression-connections command DC-585, IPC-111, QC-342
ip tcp finwait-time command IPC-113
ip tcp header-compression command DC-160, DC-585, IPC-110
ip tcp intercept connection-timeout command SC-216
ip tcp intercept drop-mode command SC-215
ip tcp intercept finrst-timeout command SC-216
ip tcp intercept list command SC-214
ip tcp intercept max-incomplete high command SC-217
ip tcp intercept max-incomplete low command SC-217
ip tcp intercept mode command SC-215
ip tcp intercept one-minute high command SC-217
ip tcp intercept one-minute low command SC-217
ip tcp intercept watch-timeout command SC-215
ip tcp path-mtu-discovery command IPC-112
ip tcp queuemax command IPC-114
ip tcp selective-ack command IPC-112
ip tcp synwait-time command DC-585, IPC-111
ip tcp timestamp command IPC-113
ip telnet quiet command TC-22
IP to ATM class of service (CoS)
bandwidth, maximum available QC-363
benefits QC-351
circuit bumping QC-353
configuration (example) QC-365
features QC-352
overview QC-347
per-VC CBWFQ
configuring QC-362
support QC-350
prerequisites QC-362
restrictions QC-354
VC bundles
configuring QC-357
support QC-348
See also ATM VC bundles
IP ToS, TN3270 server configuration BC-797to BC-798
ip tos command BC-798, BC-809, BC-810
ip unnumbered command DC-150, IPC-12, IPC-531
ip unnumbered ethernet command DC-486, DC-496, DC-498, DC-635, TC-127, TC-129, WC-121
ip unnumbered loopback command DC-460
ip unreachables command IPC-80
ip urd command IPC-461
ip wccp version command FC-378
IPX
access control, configuring P2C-133
access control violation logging (examples) P2C-173
access lists
configuration (examples) P2C-172to P2C-180
extended P2C-122
extended, applying time ranges P2C-129
extended, creating P2C-125
filtering, SAP P2C-127
implicit deny P2C-128
implicit masks P2C-128
named
creating 1
extended 1
NLSP route aggregation 1
SAP 1
standard 1
NetBIOS
creating 1
description 1
NLSP route aggregation P2C-122
routing table filtering P2C-130
SAP, creating P2C-125
standard P2C-122
standard, creating P2C-125
types P2C-122
violations, logging P2C-125, P2C-127
accounting
(example) P2C-182
configuring P2C-151
database entries, deleting P2C-157
database entries, displaying P2C-157
database threshold P2C-152
enabling P2C-152
filters P2C-152
maximum transit entries P2C-152
addresses P2C-79
broadcasts P2C-96
blocking P2C-146
forwarding P2C-133, P2C-137, P2C-147
type 20 packets P2C-135, P2C-136
clock ticks P2C-140
compliance with Novell's IPX P2C-134
configurable encapsulation formats XC-331
configuration (example) XC-344
configuration (examples) P2C-157to P2C-161
configuration task list P2C-80
default routes
See NLSP, default routes
default routes, specifying P2C-149
default routes, understanding P2C-81
disabling P2C-138, P2C-150, P2C-151
encapsulation P2C-4, P2C-81to P2C-95
IEEE interfaces (table) P2C-82
SAP XC-332
encapsulation formats
Ethernet V2 XC-331
Novell-ether XC-331
Subnetwork Access Protocol (SNAP) XC-331
Enhanced IGRP P2C-87
backup server table P2C-92
Cisco's implementation P2C-5
enabling (example) P2C-160
features P2C-85
filters P2C-90
route updates 1
SAP updates 1
hello packets, intervals P2C-88
hello packets, timers P2C-88
hold time P2C-88
queries P2C-92
redistribution P2C-89
routes P2C-90
SAP
updates (example) 1
SAP updates P2C-90
split horizon P2C-90
task list P2C-86
timers, adjusting P2C-88
Enhanced IGRP, enabling P2C-87
fast switching
cache entries, deleting P2C-154
directed broadcast packets P2C-147
directed broadcast packets, enabling XC-15
enabling XC-15
over ATM P2C-120
over Frame Relay P2C-120
FDDI P2C-82
filtering P2C-104
filters
broadcast P2C-133
generic P2C-130
GGS, applying to interface P2C-131
GNS P2C-131
NetBIOS P2C-133
description 1
overview P2C-122
routing table P2C-130
SAP P2C-131
flooded broadcasts P2C-147
GNS
control requests P2C-145
filters P2C-131
queue length, SAP requests P2C-142
request response delay P2C-145
header compression P2C-121
helper addresses P2C-133
(example) P2C-179
specifying P2C-133
interfaces, displaying status P2C-154
IPXWAN
disabling P2C-121
failed link P2C-122
network numbers P2C-121
PPP P2C-121
static routing P2C-122
ISLs, routing over XC-331
LANE support P2C-5
load sharing
per-host P2C-146
round-robin P2C-145
maximum paths
description P2C-145
messages
filtering NetBIOS P2C-133
messages, filtering NetBIOS P2C-133
MIB P2C-5
MLS support P2C-5
monitoring tasks P2C-153
multicasts P2C-96
Multilayer Switching
See IPX, MLS support
NetBIOS
access control P2C-132
filters P2C-132
filters (example) P2C-177
messages, filtering P2C-133
network access P2C-122to P2C-124
network connectivity, testing P2C-155
network numbers
definition P2C-79
interfaces P2C-81
node numbers P2C-79
Novell IPX compliance P2C-134
packets, padding P2C-150
padding packets XC-20
performance tuning P2C-134
per-host load sharing, enabling P2C-146
ping type, selecting P2C-154
PPP P2C-121
restarting P2C-138, P2C-150, P2C-151
RIP
description P2C-139
updates
delay between 1
delays 1
timers 1
round-robin load sharing, enabling P2C-145
route aggregation, See NLSP
route cache
invalidation XC-19
size XC-18
route cache, size P2C-148
route cache invalidation P2C-149
routing
between emulated LANs P2C-5
enabling
(example) 1
on multiple networks 1
on multiple networks (example) 1
on routers 1
over WAN interface (example) 1
metrics P2C-4
routing protocols
EIGRP P2C-85
NLSP P2C-103
RIP P2C-139
routing table entries
adding P2C-130
deleting P2C-154
displaying P2C-154
access lists, creating P2C-125
delay, setting P2C-143
delay between packets
setting 1
delay between packets, setting P2C-137, P2C-138
filtering P2C-125
filters P2C-131
filters (example) P2C-174, P2C-175
messages, filtering P2C-131
queue length, setting P2C-142
responses to GNS requests, controlling P2C-144
split horizon P2C-91
static entries, configuring P2C-142
table, static entries P2C-142
updates P2C-91
secondary networks
configuration (example) P2C-158
shutting down (example) P2C-159
servers, displaying P2C-154
static routes
description P2C-139
floating P2C-140
overriding P2C-140
routing table, adding to P2C-139
subinterfaces
configuration (example) P2C-157
configuring P2C-83
configuring multiple encapsulations on P2C-95
NLSP P2C-95
shutting down (example) P2C-158
tick count P2C-140
traffic, displaying statistics P2C-154
TR LANE support XC-373
type 20 packets
accepting P2C-136
VLANs
TRISL, configuring XC-333
TRISL, configuring NetWare XC-333
VLAN support P2C-5
watchdog packets P2C-120, P2C-121
IPX (Internet Packet Exchange)
over Frame Relay (examples) WC-209
IPX (Internet Packet Exchange Protocol)
over PPP
configuring DC-578
IPX (Internetwork Packet Exchange)
configuring over PPP DC-579
DDR, configuring DC-357
dialer profiles, configuring DC-433
fast switching, legacy DDR DC-406
over Frame Relay (examples) WC-210
header compression over PPP DC-585
multicast address, SMDS address mapping to WC-247
network numbers (example) DC-47
over PPP
configuring DC-578
dedicated network numbers DC-579
loopback interfaces DC-579
(example) 1
over PPP vty lines, configuring TC-140
SMDS
configuring WC-249
dynamic address mapping (example) WC-254
IPX (Internetwork Packet Exchange), SAP BC-177
IPX, DECnet configuration caveat P3C-34
ipx access-group command P2C-123, P2C-130
ipx access-list command P2C-107, P2C-126, P2C-127, P2C-128
ipx accounting command P2C-152
ipx accounting-list command P2C-152
ipx accounting-threshold command P2C-152
ipx accounting-transits command P2C-152
ipx advertise-default-route-only command P2C-150
ipx backup-server-query-interval command P2C-92
ipx bandwidth-percent eigrp command P2C-87
ipx broadcast-fastswitching command P2C-147, XC-15
ipx compression enable command DC-586
IPXCP
See IPX, over PPP
ipx default-output-rip-delay command P2C-137, P2C-141
ipx default-output-sap-delay command P2C-137, P2C-143
ipx default-ping command P2C-154
ipx default-route command P2C-149
ipx default-triggered-rip-delay command P2C-137, P2C-141
ipx default-triggered-sap-delay command P2C-137, P2C-143
ipx delay command P2C-140
IPX Display and Debug Enhancements, configuration
GGS SAP response filter (example) P2C-176
GGS SAP response filters P2C-131
IPX traffic statistics P2C-153
watchdog spoofing P2C-120
watchdog spoofing (example) P2C-170
ipx down command P2C-138, P2C-150
ipx encapsulation command BC-177
IPX Enhanced IGRP
bandwidth, (examples) P2C-162
interfaces, displaying P2C-155
monitoring P2C-155
neighbor adjacency changes, logging P2C-156
neighbors, displaying P2C-155
routing table, displaying entries P2C-155
topology table P2C-155
traffic, displaying statistics P2C-155
ipx gns-reply-disable command P2C-145
ipx gns-response-delay command P2C-145
ipx gns-round-robin command P2C-145
ipx hello-interval command P2C-88
ipx helper-address command P2C-133, P2C-137, P2C-147
ipx helper-list command P2C-133
ipx hold-time eigrp command P2C-88
ipx input-network-filter command P2C-130
ipx input-sap-filter command P2C-131
ipx internal-network command P2C-94
ipx ipxwan command P2C-121
ipx ipxwan error command P2C-122
ipx ipxwan static command P2C-122
ipx link-delay command P2C-98
ipx linkup-request command P2C-144
ipx maximum-paths command P2C-145, P2C-146
IPX MLS
access lists
overview XC-267
access lists, configuration (example) XC-301
cache XC-264
components XC-264
MLSP XC-264
MLS-RP XC-264
MLS-SE XC-264
NFFC 1
configuration task list XC-291
flow mask modes XC-265
destination XC-265
destination-source XC-265
flows XC-264
IPX MLS on interface, enabling XC-295
management interface
router, specifying on XC-295
management interface, specifying XC-295
MLSP on router, enabling XC-294
monitoring and maintaining XC-296
operation XC-298
packet rewrite XC-265
prerequisites XC-291
restrictions XC-292
feature interaction XC-293
guidelines XC-292
maximum transmission unit size XC-293
sample network topology (figure) XC-267, XC-297
VLAN ID to interface, assigning XC-294
VTP domain interface, adding XC-294
VTP domain interface, adding (caution) XC-294
ipx nasi-server enable command TC-91
ipx netbios input-access-filter command P2C-133
ipx netbios output-access-filter command P2C-133
ipx network command BC-177, DC-609, P2C-82, P2C-84, P2C-95, P2C-121, P2C-151, WC-94
ipx network encapsulation command XC-332, XC-333, XC-357
ipx nhrp authentication command P2C-117
ipx nhrp holdtime command P2C-119
ipx nhrp interest command P2C-118
ipx nhrp map command P2C-117, P2C-157
ipx nhrp max-send command P2C-118
ipx nhrp network-id command P2C-116
ipx nhrp nhs command P2C-117
ipx nhrp record command P2C-119
ipx nhrp responder command P2C-119
ipx nhrp use command P2C-118
ipx nlsp csnp-interval command P2C-99
ipx nlsp enable command P2C-95, P2C-106to P2C-114
ipx nlsp hello-interval command P2C-99
ipx nlsp lsp-interval command P2C-99
ipx nlsp metric command P2C-97
ipx nlsp multicast command P2C-97
ipx nlsp priority command P2C-98
ipx nlsp-retransmit-interval command P2C-99
ipx nlsp rip command P2C-115
ipx nlsp sap command P2C-115
ipx output-ggs-filter command P2C-132
ipx output-gns-filter command P2C-131
ipx output-network-filter command P2C-130
ipx output-rip-delay command P2C-137, P2C-138, P2C-141
ipx output-sap-delay command P2C-137, P2C-138, P2C-143
ipx output-sap-filter command P2C-131
ipx pad-process-switched-packets command P2C-150, XC-20
ipx per-host-load-share command P2C-146
ipx ppp-client loopback command DC-579
ipx rip-max-packetsize command P2C-141, P2C-143
ipx rip-multiplier command P2C-141
ipx route-cache command DC-434, P2C-148, P2C-150, WC-252, XC-15, XC-17, XC-20
ipx route-cache inactivity-timeout command P2C-149, XC-19
ipx route-cache max-size command P2C-148, XC-19
ipx route command P2C-139, P2C-140
ipx router command P2C-87, P2C-89, P2C-94, P2C-115
IPX router configuration mode, summary FC-403
ipx router eigrp command P2C-111, P2C-112
ipx router-filter command P2C-130
ipx router nlsp command P2C-97, P2C-105to P2C-114
ipx router-sap-filter command P2C-131
ipx routing command BC-150, BC-177, P2C-81, XC-332, XC-333, XC-357
IPX routing over ISL in VLANs
IPX routing, enabling XC-332
NetWare
subinterface, configuring XC-332
VLAN encapsulation format XC-332
ipx sap command DC-699, DC-722, P2C-142
ipx sap-incremental command P2C-91
ipx sap-incremental split-horizon command P2C-91
ipx sap-max-packetsize command P2C-141
ipx sap-multiplier command P2C-143
ipx sap-queue-maximum command P2C-142
ipx split-horizon command P2C-90
ipx spx-idle-time command DC-357, DC-434
ipx spx-spoof command DC-357, DC-372, DC-434
ipx throughput command P2C-98
ipx triggered-rip-delay command P2C-137, P2C-141
ipx triggered-sap-delay command P2C-137, P2C-143
ipx type-20-helpered command P2C-137
ipx type-20-input-checks command P2C-136
ipx type-20-output-checks command P2C-136
ipx type-20-propagation command P2C-135, P2C-138
ipx update interval command P2C-141, P2C-143
ipx update sap-after-rip command P2C-144
IPXWAN
See IPX, IPXWAN
ipx watchdog-spoof command DC-357, DC-434, P2C-120
IRB (integrated routing and bridging)
and routed bridge encapsulation WC-140
BVI
configuration BC-39
description BC-23
configuration
basic (example) BC-62
complex (example) BC-62
multiple bridge groups (example) BC-64
PA-12E/2FE Ethernet Switch (example) BC-81
task list BC-37
configuring BC-37
enabling BC-38
overview BC-22
protocol configuration BC-39
Token Ring considerations BC-40
IRDP (ICMP Router Discovery Protocol)
conformance to Router Discovery Protocol IPC-29
enabling IPC-29
use in routing assistance IPC-29
IS (intermediate system)
listing, for NSAP-to-SNPA mapping P3C-85
neighbors P3C-96
ISAKMP SC-378
See also IKE SC-377
ISAKMP policy configuration mode
summary FC-403
ISDN
128 kbps leased-line service
(example) DC-200
configuring DC-195
interface characteristics DC-195
Advice of Charge DC-318to DC-319
BRI and dialer profiles (example) DC-327
call history DC-319
destination DC-318
dialer map class DC-319
dialer profiles DC-318
ISDN interface, configuring DC-318
legacy DDR DC-318
outgoing calls DC-318
overview DC-318
PRI and legacy DDR (example) DC-326
short-hold mode, configuring DC-318
switch types DC-318
B channel
ascending call order (example) DC-302
call order default DC-276
outgoing call order DC-276
caller ID callback conflict DC-653
call history DC-319
(table) DC-183
override DC-192
channels, disabling DC-322
channel service states DC-323
dial peers
inbound call leg DC-332
outbound call leg DC-332
disconnect timers
See disconnect timers
DNIS-plus-ISDN-subaddress binding, (example) DC-440
encapsulations
automatic detection DC-324
dynamic multiple DC-440
interfaces
monitoring DC-319
TEI DC-270
LAPB-TA asynchronous traffic DC-204
leased-line service in Germany and Japan DC-195
multiple switch types DC-186
configuration (example) DC-197
PRI interfaces, configuring DC-274
restrictions DC-274
Network Side PRI Signaling, Trunking, and Switching
call switching, dial peers (example) DC-342
COR
configuring 1
dial peers (example) 1
outgoing dial peers (example) 1
monitoring DC-342
special numbers (example) DC-345
switch types
configuring 1
supported 1
trunk group (example) DC-343
verification procedure DC-338
alternate route index DC-320
backup D-channel DC-321, DC-328, DC-329
channel interface
configuring 1
disabling 1
channelized T1 controllers (example) DC-328, DC-329
DDR configuration (example) DC-329
groups, monitoring DC-323
PRI group, configuring DC-320
primary and backup D channels DC-320
primary D-channel DC-321, DC-328, DC-329
service state (example) DC-329
switch types DC-320
PRI
Class of Restrictions VC-148
configuring classes of restrictions VC-150
semipermanent connections
Australia, Germany DC-194
special signaling
(examples) DC-326
troubleshooting DC-326
subaddress binding DC-193
voice
BRI VC-591
configuration examples VC-610
configuration tasks VC-590
limitations VC-589
overview VC-584
prerequisites VC-590
PRI
configuring 1
configuring voice ports 1
Q.931 PRI support
configuring 1
Q.931 support VC-588
QSIG BRI
configuring 1
QSIG controllers
configuring 1
QSIG PRI
configuring 1
QSIG protocol support VC-585
QSIG support
configuring 1
QSIG support limitations VC-589
QSIG switch configuration options VC-588
ISDN, X.25 over D channel WC-15
isdn alert end-to-end command VC-239
isdn all-incoming-calls-v120 command DC-203
isdn answer1 command DC-191, DC-213
isdn answer2 command DC-191
isdn bchan-number-order command DC-276
ISDN BRI
asynchronous access DC-203
called party number, verifying DC-190
caller ID screening DC-190
calling-line identification, configuring DC-190
calling number identification DC-191
compression (examples) DC-198
configuration buffers
configuring DC-185
verifying DC-185
configuration self-tests DC-196
dialer rotary group (example) DC-198
encapsulations, configuring DC-187
fast rollover delay, configuring DC-192
global and interface switch type (example) DC-197
interfaces
configuring DC-186
monitoring DC-196
leased-line service DC-194
128 kbps DC-195
normal speeds DC-195
platform support DC-195
line configuration requirements DC-180
line speed, configuring DC-191
MLP and compression (example) DC-199
modem use over
BRI interface configuration (example) DC-216
complete configuration (example) DC-219
configuring DC-211
overview DC-210
verifying DC-214
MTU size DC-185
network address, configuring DC-189
network module DC-209
North American switch configuration DC-180
point-to-multipoint service DC-180
point-to-point service DC-180
semipermanent connections DC-189
Sending Complete information element
Taiwan, Hong Kong DC-193
switch types
(table) DC-185
configuring DC-184
North American configuration DC-180
TEI negotiation timing, configuring DC-190
troubleshooting DC-196
V.120 support, PPP on virtual terminal lines DC-203
voice calls
incoming (example) DC-199
outgoing (example) DC-199
switch type configuration DC-180, DC-184
X.25 traffic, configuring DC-233, DC-240
isdn caller command DC-190, DC-213, DC-656
ISDN caller ID callback
(examples) DC-657
best match system, don't care digits DC-657
callback, local side DC-655
calling, remote side DC-656
DDR fast call rerouting for ISDN, calling side DC-655
dialer enable-timeout timer DC-655
dialer profiles
callback actions DC-655
processes DC-655
dialer rotary, configuring DC-656
dialer rotary group (example) DC-661
dialer wait-for-carrier timer DC-655
don't care digits DC-658, DC-668
legacy DDR
callback actions DC-654
configuring DC-655
overview DC-654
prerequisites
dialer profiles DC-653
legacy DDR DC-653
remote side configuration note DC-655
timers, configuring DC-655
isdn calling-number command DC-191, DC-213, DC-270
isdn contiguous-bchan command VC-604
isdn disconnect-cause command DC-192
isdn fast-rollover-delay command DC-213, DC-651
isdn guard-timer command DC-272
isdn incoming-voice command VC-591
isdn incoming-voice modem command DC-213, DC-256, DC-271
isdn i-number command VC-865, VC-867
ISDN LAPB-TA
configuration (example) DC-207
encapsulation autodetection DC-205
overview DC-204
isdn layer1-emulate command VC-592
isdn leased-line bri 128 command DC-195
isdn leased-line bri command DC-195
isdn modem-busy-cause command DC-213
isdn network-failure-cause command VC-603, VC-604
ISDN Non-Facility Associated Signaling
See NFAS
isdn not-end-to-end command DC-191, DC-192, DC-213
isdn overlap-receiving command VC-603
isdn point-to-point setup command VC-593
ISDN PRI
(examples) DC-298
B channel
ascending call order (example) DC-302
busyout DC-302
outgoing call order DC-276
calling number identification DC-270
channel groups (example) DC-303
channelized E1 controllers
configuring DC-264
DDR configuration (example) DC-301
slot and port numbering DC-264
channelized T1 controllers
configuring DC-265
DDR configuration (example) DC-300
slot and port numbering DC-265
class of restrictions DC-333
configuring DC-337
configuration self-tests DC-276
D-channel serial interface number DC-264, DC-266
DDR configuration requirements DC-263
encapsulations
Frame Relay DC-268
X.25 DC-268
guard timer, configuring DC-272
legacy DDR interface (example) DC-329
line configuration requirements DC-263
multiple switch types
(example) DC-302
configuring DC-274
restrictions DC-274
North American switch configuration DC-263
NSF call-by-call (example) DC-299
point-to-multipoint service DC-263
semipermanent connections, Australia DC-269, DC-326
Sending Complete information element
Hong Kong, Taiwan DC-272
serial interfaces, configuring DC-266
Trunk Group Resource Manager DC-332
configuring DC-336
isdn protocol-emulate network command DC-335
ISDN redirect number VC-201
isdn reject command DC-271
isdn sending-complete command DC-193, DC-213, DC-272, VC-592
isdn service command DC-322
isdn snmp busyout b-channel command DC-273
isdn spid1 command DC-187, DC-213, VC-591
isdn spid2 command DC-187, DC-213
isdn static-tei command DC-270, VC-593
isdn switch-type VC-245
isdn switch-type (PRI) command VC-632, VC-633, VC-637
isdn switch-type basic qsig command VC-600
isdn switch-type command DC-184, DC-195, DC-264, DC-265, DC-274, DC-335, VC-245, VC-591
isdn switch-type primary-net5 command VC-609
isdn switch-type primary-qsig command VC-239, VC-600
ISDN switch types
See ISDN BRI; ISDN PRI; multiple switch types; switch types
isdn t306 command DC-333
isdn t310 command DC-333
isdn tei command DC-190, DC-270
isdn twait-disable command VC-591
isdn v110 only command DC-193
isdn v110 padding command DC-194
isdn x25 dchannel command DC-233
isdn x25 static-tei command DC-233
IS-IS (Intermediate System-to-Intermediate System) XC-123
adjacency, specifying IPC-278
advertised hello interval, setting IPC-276
area passwords, configuring IPC-281
conditional default origination IPC-280
configuration task list IPC-273
configuring IPC-273
default route, generating IPC-280
designated router election, specifying IPC-278
domain passwords, configuring IPC-281
hello interval, setting IPC-276
interface parameters, configuring IPC-275
interface password, assigning IPC-278
link-state metrics, configuring IPC-276
LSP lifetime IPC-282
LSP refresh IPC-282
multiarea support
configuration
(example) 1
LSP flooding 1
output of show commands 1
routing level 1
password authentication IPC-281
retransmission level, setting IPC-277
route redistribution IPC-361
system type IPC-280
transitioning an IS-IS network to a new technology XC-93
isis adjacency-filter command P3C-87
isis circuit-type command IPC-278, P3C-78
isis csnp-interval command IPC-276, P3C-76
IS-IS Dynamic Routing P3C-72
IS-IS for CLNS
adjacency, specifying desired P3C-78
adjacency state changes P3C-81
area password, setting P3C-78
area routing P3C-68
Cisco's implementation P3C-65
CSNP interval, configuring P3C-76
designated router election P3C-77
domain password, setting P3C-78
dynamic routing, configuring P3C-73
hello interval, configuring P3C-76
hello multiplier, configuring P3C-76
interface parameter, configuring P3C-75
Level 1 routers P3C-68
Level 1 routing table, displaying P3C-97
link-state
database, displaying P3C-97
metric, configuring P3C-75
LSP (link-state packet)
MTU (maximum transmission unit)size, setting P3C-81
retransmission interval, configuring P3C-77
LSPs, ignoring P3C-80
password
assigning P3C-78
authentication P3C-78
router level support, configuring P3C-80
routing
configuration (example) P3C-108
information redistribution P3C-87
system routing P3C-68
IS-IS for IP, area tag P3C-73, P3C-75
isis hello-interval command IPC-276, P3C-76
isis hello-multiplier command IPC-278, P3C-76
isis lsp-interval command IPC-277
isis metric command IPC-276, P3C-76
IS-IS Multiarea Support, configuration
(example) P3C-108
LSP flooding P3C-79
output of show commands P3C-82
partitioning avoidance P3C-81
routing level P3C-82
isis password command IPC-278, P3C-78
isis priority command IPC-278, P3C-77
isis retransmit-interval command IPC-277, P3C-77
isis retransmit-throttle-interval command IPC-277
ISL (Inter-Switch Link Protocol)
Banyan VINES encapsulation XC-326
DECnet
encapsulation, configuring XC-326
description XC-319
encapsulation XC-318
configuration tasks XC-324
frame tagging XC-323
HSRP VLAN encapsulation XC-329
IPX encapsulations XC-331
link XC-319
overview XC-323
subinterface, configuring on a XC-335
VLANs
identifier XC-323
traffic, distributed on VIP card XC-334
XNS encapsulation XC-335, XC-336, XC-337
ISO 10589 IPC-273
ISO CLNS
fast switching XC-17
ISO CLNS (ISO Connectionless Network)
access lists, creating P3C-86
addresses
assigning P3C-64
background P3C-63
multiple area P3C-64
rules P3C-66
adjacencies
CLNS neighbors P3C-96
ES neighbors P3C-96
establishing P3C-86
IS neighbors P3C-96
areas
assigning P3C-64
multihoming P3C-74
basic static routing (example) P3C-112
cache, clearing P3C-96
Cisco's implementation P3C-4
CLNP ISO documentation P3C-4
concurrent routing and bridging P3C-67
configuration
(examples) P3C-104
overlapping areas P3C-106
over WANs P3C-92
performance parameters P3C-93
tasks P3C-69
congestion threshold P3C-95
DECnet cluster alias configuration P3C-91
destination routing table, displaying P3C-97
Digital-compatible mode configuration P3C-92
displaying general information P3C-96
DNS queries P3C-86
domains
addresses P3C-64
establishing P3C-64
dynamic routing
configuring P3C-70
in overlapping areas P3C-106
interdomain routing (example) P3C-107
NSAPs P3C-63
protocol support P3C-68
within a domain P3C-105
ERPDU, disabling P3C-95
ES-IS
ISO documentation P3C-4
parameters P3C-91
protocol P3C-84
ES neighbors P3C-96
fast switching P3C-94
filter expressions
creating P3C-87
displaying P3C-96
filter sets, displaying P3C-96
GOSIP compliance P3C-4
HDLC encapsulation P3C-4
hello packets, specifying P3C-91
IGRP support P3C-4
interdomain routing (example) P3C-114
interfaces
enabling on P3C-83
information, displaying P3C-96
intradomain static routing (example) P3C-113
IS-IS, ISO documentation P3C-4
IS neighbors P3C-96
ISO standards supported P3C-4
local source packet parameters P3C-96
MTU P3C-93
multihoming P3C-74
neighbors
listing, for NSAP-to-SNPA mapping P3C-85
NETs P3C-63
assigning P3C-64
next hop P3C-67
network, maintaining P3C-96
network connectivity, testing P3C-96
NSAPs
address rules P3C-66
and NETs in ISO network architecture P3C-63
dynamic routing P3C-63
field formats P3C-63
prefix P3C-66
n-selector P3C-63
OSI standard P3C-63
packet lifetime P3C-96
protocols supported P3C-4
QoS option P3C-92
record route option P3C-92
redistribution, address match P3C-89
routes
entering P3C-66
next hop NET P3C-66
NSAPs prefix P3C-66
routing
dynamic
in more than one area P3C-106
static routes
routing cache
clearing P3C-96
dynamic entries P3C-67
entries, displaying P3C-96
reinitializing P3C-96
static entries P3C-67
routing protocols supported P3C-4
security-option packets, allowing to pass P3C-92
source route option P3C-92
static routing P3C-68
static routing, support of P3C-4
Target Identifier Address Resolution Protocol
See TARP
traffic statistics, displaying P3C-97
X.25 encapsulation P3C-4
ISO CLNS (ISO Connectionless Network Service)
multicast address, SMDS address mapping WC-247
SMDS, configuring WC-249
transmitting congestion information over Frame Relay WC-12
ISO CLNS (ISO Connectionless Network Service), DDR
access groups DC-359
configuring DC-359
ISO IGRP
addressing P3C-64
adjacency P3C-87
area routing P3C-68
areas P3C-68
border routers P3C-87
Cisco's implementation P3C-65
configuring P3C-71
enabling P3C-70
filters P3C-87
interdomain routing P3C-68
Level 1 routers P3C-68
metric adjustments P3C-71
NETs, configuring P3C-70
packet forwarding P3C-87
preferred routes P3C-90
processes per router P3C-70
route maps P3C-88
router level, specifying P3C-70
routing
information redistribution P3C-87
processes, displaying P3C-97
split horizon P3C-72
system IDs P3C-68
system routing P3C-68
timing parameter adjustments P3C-71
iso-igrp adjacency-filter command P3C-87
ISR (Intermediate Session Routing), CMPC support BC-248, BC-674
is-type command IPC-280, P3C-80
ITU-T (International Telecommunication Union Telecommunication Standardization Sector)
G.114 VC-164
ITU-T X.25 Recommendation WC-15
IVR (interactive voice response) VC-832
J
Java blocking
See CBAC, Java
K
KA9Q program IC-174
keepalive (TN3270) command BC-799
keepalive command DC-619, WC-163
keepalive interval, setting WC-163
keepalive-lifetime command XC-453
keepalives
IPX, watchdog packets P2C-120
LAT timers TC-31
PPP, enabling LQM DC-599
SPX P2C-121
translate option TC-128
keepalives, Fast EtherChannel IC-50
keepalives, Frame Relay end-to-end
See Frame Relay, end-to-end keepalives
keepalives, TN3270 server configuration BC-798to BC-799
keepalive-time command XC-453
keepalive timers
ATM, setting for WC-38
keepalive timers, BGP IPC-317
Kerberos
authentication SC-161
login SC-27
PPP SC-30
configuring
credential forwarding SC-161
instance mapping SC-163
KDC (key distribution center) SC-157
database 1
mandatory authentication SC-163
network access server communication SC-159
realms SC-160
SRVTABs, creating SC-158
SRVTABs, extracting SC-159
SRVTABs files, copying SC-160
Encrypted Kerberized Telnet SC-162
maintaining SC-164
monitoring SC-164
Telnet to router SC-162
terms (table) SC-154
Kerberos security
ARA, enabling TC-76
Kermit
files
downloading FC-80
keyboard emulations, IBM 7171 (example) TC-48
key chain command
for DRP IPC-84
key-chain configuration mode
summary FC-403
key chain key configuration mode
description FC-403
key command
EIGRP IPC-266
for DRP IPC-84
keymap command TC-45
keymaps
alternate TC-46
changing FC-83
line characteristics TC-46
selection priority TC-42
selection process (figure) TC-43
keymap-type command TC-45
keys
chains SC-420
management SC-420
preshared
configuring (example) SC-389, SC-397
IKE policy parameter SC-383
ISAKMP identity, configuring SC-387
masks SC-389
specifying SC-389
preshared using AAA server SC-390
configuring SC-391
key-string command SC-388
EIGRP IPC-266
for DRP IPC-85
Kinetics FastPath router, KIP software P2C-35
K-Star, Shiva FastPath routers P2C-11
L
L2F (Layer 2 Forwarding)
encapsulation processes DC-508
fast switching stack group environment DC-508
overview TC-126
virtual templates TC-126
L2F (Level 2 Forwarding), displaying details of WC-135
l2tp ip tos reflect command DC-539
l2tp tunnel authentication command DC-531
l2tp tunnel password command DC-532
label
assigning XC-114
disposition XC-142
imposition XC-142
switch routers XC-167
label binding XC-88
distribution XC-88
label edge device XC-119
label forwarding XC-166
label space XC-119
label switching
destination prefixes, configuring XC-146
incremental enabling XC-145
paths, configuring XC-146
restrictions XC-83
routing XC-88
subset of destination prefixes, enabling XC-146
label switching network
router-only XC-144
traffic engineered paths XC-151
label switching router, configuring XC-171
LAN
segmentation XC-312
LANCE controller IC-35
LANE (LAN Emulation)
emulated LANs, routing between P2C-3, P2C-5
LANE (LAN emulation)
address resolution XC-368
assigning components to subinterfaces
rules XC-377
ATM address
constructing XC-375
ESI field XC-375
ESI values derived from MAC address XC-376
prefix, configuring on a switch XC-375, XC-378
syntax XC-375
templates XC-376
wildcards 1
values of wildcard characters XC-376
broadcast-and-unknown server (BUS) XC-372
Cisco's implementation XC-366
and server, setting up XC-386to XC-387
changing to different emulated LAN, change database first XC-386
MAC address XC-375
protocol address, assigning XC-386, XC-387
requires MAC address XC-374
components XC-366
subinterfaces, rules for assigning XC-377
unique ATM address XC-374
configuration plan and worksheet recommended XC-378
configuration server XC-366
ATM address, locally configured XC-379
database XC-366
enabling XC-384
how clients find XC-367
on major interface XC-377
configuration task list XC-377
database
default LAN, setting up XC-381
restricted-membership LANs, setting up XC-383
setting up XC-381
task list for, setting up XC-381, XC-420
types of entries XC-366
unrestricted-membership LANs, setting up XC-382
default emulated LAN, unrestricted membership mandatory XC-381
emulated LANs
and subnetworks XC-386, XC-387
default, setting up database for XC-381
default components on several routers, configuration (example) XC-394, XC-395
multiple (figure) XC-396
names, unique on an interface XC-366
emulated LANs, routing between XC-366, XC-370, XC-385, XC-386
ESI template XC-376
Ethernet support XC-373
fault tolerance XC-365
interaction with MPOA XC-441
LE ARP XC-372
MAC address
clients on a given interface XC-374
MAC layer connectivity XC-365
MPOA XC-388
multicast addresses XC-368
network flappage XC-391
prefix template XC-376
scenarios
multiple emulated LANs XC-370
single emulated LAN XC-369
typical XC-369
server XC-372
and clients, setting up XC-385to XC-387
brief description XC-366
Cisco's implementation XC-366
single emulated LAN scenario (figure) XC-369
support
Banyan Vines XC-373
DECnet XC-373
XNS XC-373
supported routing protocol XC-373
token ring, configuring for MPOA XC-457
VCCs
Configure Direct (server) XC-367
Control Distribute XC-368
Multicast Forward XC-368
Multicast Send XC-368
types (figure) XC-367
VCC types XC-367
lane auto-config-atm-address command XC-385
lane client command XC-386, XC-387
lane client flush command XC-387
lane client mpoa client command XC-458
lane client mpoa client name command XC-446
lane client mpoa server command XC-458
lane client mpoa server name command XC-453
lane client tokenring command XC-458
lane config command XC-384
lane database command XC-381to XC-383, XC-420, XC-422, XC-423, XC-458
lane server-bus command XC-386, XC-452
lane server-bus ethernet command XC-446
lane server-bus tokenring elan-id command XC-458
LAN Extender
access list, assigning IC-66
acknowledgment timeout IC-68
description IC-60
Ethernet interface
shutting down IC-68
filtering for Ethernet- and SNAP-encapsulated packets IC-67
frames
filtering by MAC address IC-64, IC-66
filtering by protocol type IC-67
interface
access list (examples) IC-80
binding to the serial line IC-62
configuring IC-62, IC-64, IC-80
enabling (example) IC-80
MAC address, assigning IC-64
PPP encapsulation on serial interface IC-64
serial interface, configuring IC-64
LEDs
on LAN Extender IC-69
trouble indicators (table) IC-70, IC-71
MAC address IC-62
priority list
assigning IC-68
problem solving IC-69
queueing priorities, setting IC-67
rebooting IC-69
restarting IC-69
retries
setting IC-68
retry count IC-68
software image
downloading IC-69
timeout, setting IC-68
troubleshooting IC-69
lan-name command BC-531
LANs (local area network)
segmentation XC-312
with VLANs XC-321
LAPB (Link Access Procedure, Balanced)
(example) WC-321
compression WC-261
configuring WC-260
custom queuing WC-263
datagram transport WC-15, WC-260
DDR, configuring DC-409
encapsulation WC-260
frame error detection WC-260, WC-262
general statistics, displaying WC-319
modulo function WC-262
multiprotocol (example) WC-321
N1 parameter WC-263
over leased serial line WC-260, WC-263
parameters (table) WC-262
PLP restarts WC-276
priority queuing WC-263
retransmission criteria WC-260, WC-262
timers, link failure (T4) and hardware outage WC-263
transparent bridging (example) WC-321
window parameter k WC-262
lapb interface-outage command WC-262
lapb k command WC-262
lapb modulo command WC-262
lapb n1 command WC-262
lapb n2 command WC-262
lapb t1 command WC-262
lapb t4 command WC-262
LAPF (Link Access Procedure, Frame Relay)
displaying WC-207
link idle timer value T203, setting WC-168
maximum retransmission count N200, setting WC-168
retransmission timer value T200, setting WC-168
window size k, setting WC-168
large-scale dial-out
AAA network security, configuring DC-679
AAA server access, configuring DC-680
Ascend AV pairs (table) DC-682
asynchronous dialing (example) DC-692
configuration task prerequisites DC-678
map class attributes DC-685
monitoring DC-686
network security services DC-679
overview DC-675
RADIUS attributes DC-684
remote network route, configuring DC-679
reverse DNS, configuring DC-680
scalable dial-out service DC-676
SGBP dial-out connection bidding, configuring DC-680
stack group and static route download configuration (example) DC-686
user profiles
(example) DC-691
configuring DC-681
LAT (local-area transport)
access lists (example) TC-37
basic services configuration (example) TC-35
compression configuration BC-42
configuring TC-28
connections
configuration (examples) TC-38
VMS host TC-27
delay set acknowledgment TC-32
font selection TC-54
group code filtering BC-49
group codes (example) TC-35
group list
logical names TC-29
outgoing connections TC-29
groups TC-26
group services TC-29
high-speed buffer TC-28
keepalive timer TC-31
master and slave functions TC-25
message retransmission limit TC-31
multiple connections, starting TC-34
outbound session (example) TC-36
overview TC-25
performance TC-32
port name TC-28
protocol translations
configuration (examples) TC-151to TC-169
LAT to LAT over an IP WAN (example) TC-156
TCP standalone (example) TC-169
to LAT via X.25 (example) TC-161
to TCP via X.25 (example) TC-163
X.25 host (example) TC-165
X.25 PAD (examples) TC-174
protocol transparency TC-28
proxy node, enabling TC-30
received messages TC-32
rotary group
associating with a service (example) TC-37
configuration (example) TC-36
service announcements
administrative filtering BC-48
deny conditions for LAT group code BC-49
group code service filtering BC-49
service announcements, disabling TC-31
services
description TC-26
LAN (example) TC-36
partitioning by terminal line (example) TC-36
sessions
description TC-27
maximum virtual circuit TC-32
timers
traffic, configuring TC-31
virtual circuit, configuring TC-31
VMS host connection TC-27
lat command TC-33, TC-123, TC-128
lat enabled command TC-29
lat group-list command TC-29
lat host-buffers command TC-32
lat host-delay command TC-32
lat out-group command TC-29
lat remote-modification command TC-29, TC-33
lat server-buffers command TC-32
lat service-announcements command TC-30
lat service-group command TC-29
lat service-responder command TC-30
lat service-timer command TC-30
lat vc-sessions command TC-32
lat vc-timer command TC-31
Layer 2
addresses XC-8
encapsulating interfaces XC-321
forwarding table
IP multicast MLS XC-261
Layer 3
addresses XC-8
building VPNs XC-98
connectionless architecture XC-98
features XC-114
MLS cache
IP multicast MLS XC-261
LC-ATM ports XC-118
LCN (logical channel number), configuring XC-128
lcnode command P3C-2
LDAP (Lightweight Directory Access Protocol) support, specifying SC-367
LDP
definition XC-84
hot redundancy, configuring XC-129
LE ARP XC-372
lease, specifying IPC-71
lease command IPC-69
leased lines
ISDN BRI (example) DC-439
NM-8AM and NM-16AM analog modem support DC-68
configuring DC-69
Leased Line Support for Cisco 2600/3600 Series Analog Modems feature DC-68
leased serial line, LAPB on WC-260
commands XC-458
database, configuring XC-458
Token Ring, configuring XC-458
LED trouble indicators table IC-70, IC-71
legacy DDR (dial-on-demand routing)
dial backup
asynchronous interfaces (example) DC-456
ISDN (example) DC-457
hubs
(figure) DC-401
access lists DC-402
AppleTalk (example) DC-412
asynchronous interfaces (example) DC-414
authentication DC-399
Banyan VINES (example) DC-413
bridging access control DC-402
configuration task flow DC-394
connections, monitoring DC-410
DECnet (example) DC-413
dialer group interface assignment DC-403
dialer hold queue DC-405
dialer interfaces (figure) DC-398
dialer rotary group DC-397, DC-400, DC-405, DC-430
dialing configuration (example) DC-417
Frame Relay (examples) DC-421
interface diagnostics DC-410
ISDN interfaces, enabling DC-429
ISO CLNS (example) DC-385, DC-414
LAPB (example) DC-423
LAPB, configuring DC-409
load threshold DC-405
multiple destinations DC-401, DC-432
multiple destinations (example) DC-417
PPP (example) DC-419
protocol access control DC-402
routing access control DC-403
timers, enabling DC-403
transparent bridging (example) DC-411
X.25 DC-409
X.25 encapsulation (example) DC-423
XNS (example) DC-414
ISDN caller ID callback DC-654
actions DC-654
BRI interface (example) DC-660
configuring DC-655
ISDN NFAS primary D-channel DC-329
non-V.25bis modems DC-368
PPP DDR
with authentication (example) DC-362
without authentication (example) DC-360
spokes
2-way client/server (examples) DC-382, DC-389
access lists DC-371
AppleTalk configuration (example) DC-384
bandwidth on demand DC-375
bridging access control DC-371
carrier wait time DC-374
configuring DC-365
connections, monitoring DC-379
DDR inbound traffic (example) DC-380
DECnet configuration (example) DC-384
dialer group assignment DC-373
dialer hold queue DC-375
DTR
dialing (example) 1
Frame Relay (example) DC-390, DC-391
interface
diagnostics 1
idle timer 1
priority in dialer rotary group 1
IP, configuring DC-382
ISDN interfaces, enabling DC-368
line down time DC-374
multiple calls to single destination DC-375
passive interface DC-368, DC-370
protocol access control DC-371
single site calls DC-369
spoke configuration (examples) DC-380to DC-392
transparent bridging DC-372
transparent bridging (example) DC-381
X.25
DTR dialing (example) 1
encapsulation 1
XNS configuration (example) DC-385
V.120 incoming calls (example) DC-204
virtual profiles interoperability DC-490
length command FC-84
LES XC-365
LES/BUS, configuring XC-458
Level 1 router
adjacency P3C-78
IS P3C-84
ISO IGRP P3C-80
Level 2
switching IC-71
Level 2 router
adjacency P3C-78
IS P3C-84
ISO IGRP P3C-68
routing updates P3C-70
Level 3, switching IC-71
lex burned-in-address command IC-64
lex input-address-list command IC-66
lex input-type-list command IC-67
lex priority-group command IC-68
lex retry-count command IC-68
lex timeout command IC-68
LFI (Link Fragmentation and Interleaving)
configuration (example) QC-324, QC-333
defined QC-321
interleaving statistics, displaying QC-323
monitoring QC-332
summary QC-15
verifying QC-332
See also Frame Relay, LFI; ATM, LFI
LFIB
maintaining in autonomous systems XC-109
license
CTRC configuration BC-589
CTRC router BC-575
lifetime command MWC-42, SC-385
lightweight registration VC-214
limit base-size command DC-744
limit command DC-743
limit overflow-size command DC-744
line-activation banners
configuring FC-100
disabling on a line FC-101
line aux command DC-154
line cards
commands, executing on FC-295
crash information FC-295
diagnostic testing FC-294
loading system images FC-209
See also dial shelf cards
linecode b8zs command DC-266
linecode command DC-285, DC-752, VC-74, VC-598, VC-735, VC-757
linecode hdb3 command DC-264, DC-280
line coding, NRZI IC-98
line command FC-290
line configuration mode
summary FC-404
line definition, SDLLC configuration BC-445
line feeds
inserting X.3 PAD parameters TC-191
padding X.3 PAD parameters TC-191
line-in-use messages
displaying FC-98
lines
activation message FC-100
ARA, configuring TC-67
asynchronous
configuring DC-19
modem configuration DC-25
rotary line queueing
(example) 1
configuring 1
asynchronous device connection TC-2
automatic disconnect, configuring DC-33
compared to interfaces DC-7
connection protocol, configuring TC-9
DDR asynchronous
downtime, enabling DC-374
disconnecting FC-97
file transfers FC-80
individual connections, configuring DC-157
insecure, setting for LAT FC-87
interfaces, relationship to DC-18
leased serial (example) DC-439
looped-back DC-596
modem chat scripts, activating for DC-166
modem control, configuring DC-147
modems, disabling DC-94
NM-8AM and NM-16AM analog modem leased line support DC-68
parity, configuring TC-12
passwords, enabling TC-13
reverse Telnet line speed TC-18
sending messages to FC-95
stop bits, configuring TC-12
terminal and keyboard characteristics, configuring TC-49
terminal speeds, configuring TC-12
timeout interval, configuring DC-31
tty DC-18
types, description of DC-18
line speed
current session, setting for the FC-87
line vty command SC-195
link (TN3270) command BC-810, BC-827
link efficiency mechanisms
CRTP QC-316
LFI QC-313
link-layer protocol translation, SNA over X.25
See QLLC conversion
link security BC-582
link-state metrics
IS-IS for CLNS, configuring P3C-75
link-state metrics, IS-IS, configuring IPC-276
link-state packet (LSP)
See NLSP, LSP
link-test command IC-59
LIS (logical IP subnetwork)
ATM support for WC-46
multiple
over SMDS, configuring WC-250
over SMDS, description WC-14
Listener Definition (example) BC-595
listen point
command mode BC-789
direct PU (example) BC-830
DLUR PU (examples) BC-830, BC-838
PU
command mode BC-789
configuration BC-813
listen-point command BC-803, BC-812, BC-813
lives-of-history-kept command FC-348
LLC (Logical Link Control) session identification BC-617
LLC/SNAP (example) WC-98
LLC2 (Logical Link Control, type 2)
configuration
(examples) BC-405
allowed retries BC-395
DLSw+
local acknowledgments BC-209, BC-286
TCP (example) BC-312, BC-314, BC-316
features supported BC-216, BC-386
frames received before acknowledgment configuration (example) BC-405
I-frames
acknowledgment BC-394
largest size for BC-425
rejected, resending BC-395
transmission BC-394
unacknowledged, resending BC-395
local acknowledgment
advantages of enabling BC-260
configuration BC-260
configuration (example) BC-275
parameter configuration BC-203, BC-253
T1 timer problem BC-259
maximum delay for acknowledgments BC-394
polling frequency BC-396
SDLC, PU4 (example) BC-319
transmit-poll-frame timer BC-396
XID
retry configuration BC-397
transmission frequency configuration BC-397
llc2 ack-delay-time command BC-394, BC-683, BC-699
llc2 ack-max command BC-683, BC-699
llc2 busy-time command BC-699
llc2 dynwind command BC-452
llc2 idle-time command BC-396, BC-683, BC-699
llc2 local-window command BC-394, BC-452, BC-683
llc2 N1 command BC-683, BC-699
llc2 N2 command BC-683, BC-699
llc2 n2 command BC-395
llc2 Nw command BC-683, BC-699
llc2 recv-window command BC-683, BC-699
llc2 t1-time command BC-395, BC-684, BC-699
llc2 tbusy-time command BC-396, BC-684
llc2 tpf-time command BC-396, BC-684, BC-699
llc2 trej-time command BC-395, BC-684, BC-699
llc2 xid-neg-val-time command BC-397
llc2 xid-retry-time command BC-397
LLQ (low latency queueing)
bandwidth allocation QC-98
burst size, configuring QC-140
configuring QC-131
Distributed
benefits QC-102
configuration (examples) QC-155
configuring QC-133
description QC-101
prerequisites QC-104
restrictions QC-103
verifying QC-135
Frame Relay
enabling QC-139
prerequisites QC-105
verifying QC-139
VoFR, effect on QC-105
overview QC-97
restrictions QC-101
verifying QC-132
LMI (Local Management Interface)
autosense WC-162
DCE, polling verification timer for WC-164
DTE
error threshold WC-164
full status polling interval WC-164
monitored events counter WC-164
Frame Relay WC-161
keepalive interval, setting WC-163
NNI
error threshold WC-164
monitored events counter WC-164
polling verification timer WC-164
specifications WC-11
statistics, displaying WC-206
type
setting WC-163
writing to NVRAM WC-163
LNM (LAN Network Manager)
Cisco routing devices BC-103
configuration BC-102
disabling BC-104
errors BC-120
LRM parameters, changing BC-105
management station configuration BC-104
network configuration
complex (example) BC-135
simple (example) BC-134
reporting interval, changing BC-107
reporting link password, applying BC-106
reporting threshold, changing BC-106
report path trace function, disabling BC-105
routing device
configuration BC-105
preventing parameter changes BC-105
server, enabling BC-106
lnm alternate command BC-106
lnm crs command BC-106
lnm disabled command BC-105
lnm express-buffer command BC-107
lnm loss-threshold command BC-107
lnm password command BC-106
lnm pathtrace-disabled command BC-105
lnm rem command BC-106
lnm rps command BC-106
lnm snmp-only command BC-105
lnm softerr command BC-107
load balancing
in VLANs XC-321
load balancing, server farms IPC-133
load balancing, X.25 (example) WC-327
load balancing serial lines BC-57
load distribution
See deterministic load distribution
load-interval command FC-279
load sharing, RSRB (example) BC-278
load statistics
setting interval for FC-279
load threshold, dialer rotary DC-405, DC-437
LOCADD definition, SDLLC BC-445
locaddr-priority command BC-264, BC-685, BC-700
locaddr-priority-list command BC-264, BC-347, BC-685, BC-700
local acknowledgment
current state, displaying BC-121, BC-265
enabling BC-344
RSRB (example) BC-270
SDLC configuration BC-342
SDLLC (example) BC-436
See also LLC2
local acknowledgment, X.25 (example) WC-336
local-area mobility
configuring IPC-15
redistributing routes IPC-15
Local Call Waiting
and Enhanced Voice Services for Japan VC-860
local-lnm command IC-73
LMI (Local Management Interface)
See Frame Relay, LMI
local name command DC-532, DC-537
local SNA major node configuration, CMPC BC-695
LocalTalk P2C-2
local voice busyout
actions (table) VC-560
overview VC-538
location command BC-531
lockable command FC-86
lock-and-key SC-192
benefits SC-192
guidelines SC-196
prerequisites SC-194
verification SC-198
maintenance tasks SC-198
performance impacts SC-194
process SC-193
spoofing, risk of SC-194
when to use SC-192
lock-and-key access, dynamic access list IPC-86
lock command FC-95
locked blocks
recovering FC-219
log-adjacency-changes command P2C-100, P2C-156, P3C-81
log-adj-changes command IPC-235
logging
display device FC-289
See CBAC logging and audit trail
vty-asynchronous authentication information TC-146, TC-147
buffer TC-147
UNIX syslog server TC-147
See also message logging
logging buffered command FC-289
logging command FC-289
logging console command FC-291
logging facility command FC-292
logging in
as specific user FC-94
changing login username FC-94
(example) FC-113
logging monitor command FC-291
logging on command FC-289
logging out
from router FC-96
See also sessions, quitting
logging synchronous command FC-290
logging trap command FC-291
logical constructs
group asynchronous interfaces DC-8
virtual template interfaces DC-9, DC-484
logical interfaces
dialer DC-10
virtual access DC-11
virtual asynchronous DC-12, DC-201
login
banner tokens FC-99
login authentication command TC-13, TC-74
login authentication dialin command DC-60
login authentication nasi command TC-91
LOGIN banners
configuring FC-99
login local command DC-647, SC-195, TC-13
login-string command TC-17
login tacacs command SC-195, TC-13, TC-73
login username
changing FC-94
(example) FC-113
logmode table entry BC-578
log neighbor adjacencies,EIGRP IPC-260
logout command FC-96
loopback XC-221
interface IC-169
loopback (controller) command IC-172
loopback addresses, configuring XC-141
loopback command WC-51
loopback diagnostic command WC-50
loopback diagnostics IC-171
loopback dte command IC-121, IC-124
loopback local (controller) command IC-171, IC-172
loopback local command IC-111, IC-113, IC-121, IC-124
loopback mode, ATM WC-50
loopback network command IC-113
loopback network line command IC-111, IC-121, IC-124
loopback network payload command IC-111, IC-121, IC-124
loopback remote (controller) command IC-172
loopback remote (interface) command DC-298
loopback remote command IC-113
loopback remote line fdl command IC-117
loopback remote line inband command IC-111
loopback remote payload command IC-117
loopbacks
channelized E1
controllers IC-172
interface local DC-297
channelized T1, interface local DC-297
CSU/DSU, remote DC-298
loopbacks, use with OSPF IPC-232
loop-time clocking
back to network clock source
configuring T1/E1 controller VC-800
loss-plan command VC-98
low-latency service class XC-98
LQM (Link Quality Monitoring)
keepalives, enabling LQRs DC-599
LRM (LAN Reporting Manager)
password, applying BC-106
router parameters, changing BC-105
lsap command BC-810
LSC (label switch controller)
configuring XC-227, XC-228, XC-235, XC-236, XC-247, XC-248
definition of XC-116
external interface XC-117
functional description XC-116
multi-vc, configuring XC-229
preventing from acting as an edge LSR XC-131
redundancy
ATM switches, configuring XC-128
benefits XC-125
definition XC-125
failover XC-133
hot redundancy, configuring XC-129, XC-132
hot to warm, switching from XC-125
incorporating XC-122
standalone LSC, migrating from XC-126
supported distribution protocols XC-123
supported routing protocols XC-123
VSI, configuring XC-128
warm redundancy, configuring XC-130, XC-132
LSP (link-state packet)
packets, ignoring P3C-80
retransmission interval P3C-77
lsp-gen-interval command IPC-284, P2C-100
lsp-mtu command P2C-100, P3C-81
lsp-refresh-interval command IPC-283, P2C-100
LSPs, preventing creation of XC-133
LSR (label switch router) XC-114
configuring XC-167
definition XC-116
multi-vc, configuring XC-230
network configuration XC-226
lsr-path command FC-344
LU 6.2 protocol BC-579
LU allocation
LU nailing BC-774
LU pool BC-778to BC-779, BC-813
LU deletion
description BC-779
VTAM support BC-779
lu deletion command BC-800
LUGROUP parameter, VTAM configuration
(figure) BC-785
TN3270 server BC-786
LU nailing
algorithm BC-774
configuration removal (example) BC-837
description BC-774
limits BC-784
LUNAMES (table) BC-585
LU naming, TN3270 server, dynamic
(examples) BC-840
description BC-774
verification BC-821
LU pools
cluster allocation BC-778
configuration
guidelines BC-808
tasks, non-APPN BC-807to BC-817
description BC-775
LU allocation BC-778to BC-779, BC-813
monitoring BC-826
name requirements BC-775
prerequisites BC-784
LUs (logical units)
address, prioritizing traffic BC-263
DSPU, defining BC-516
LU routing
dedicated BC-516
pooled BC-516
TN3270 server
dynamic BC-771
lu-seed argument BC-771
names BC-771
static BC-771
lu-seed argument, direct PUs BC-771
LUSEED parameter, VTAM configuration
(figure) BC-785
TN3270 server BC-786
LU termination, TN3270 server
configuration BC-801
description BC-779
lu termination command BC-801, BC-809, BC-814
LU types, TN3270 server, description BC-771
LVC
establishing XC-141
headend XC-142
PVP, configuring XC-179
tailend XC-141
M
MAC/SAP quadruple BC-617, BC-697, BC-770
MAC address, LAN Extender Interface IC-66
mac-address command BC-120
MAC addresses, DECnet P3C-34
MAC addresses, determining IPC-12
MAC address filter, setting BC-44
MacIP
addresses P2C-33
address ranges P2C-32
advantages P2C-31
AppleTalk traffic P2C-55
clients P2C-55
description P2C-30
disadvantages P2C-31
implementation P2C-31
requirements P2C-31
MacIP, monitoring
clients TC-78
servers TC-78
traffic statistics TC-78
MAC layer and source-route bridging BC-14, BC-83
mainframe
See host
major node definitions BC-579
manager command IPC-516
manager configuration mode
See MRM manager configuration mode
Managing Port Services on the Cisco AS5800 Universal Access Server feature DC-117
map class
dialer profiles, configuring DC-430
map-class atm command FC-412
map class attributes, large-scale dial-out (table) DC-685
map class configuration mode
See static maps class configuration mode
map-class configuration mode
summary FC-412
map-class dialer command DC-319, DC-430, DC-651
map class for the VC, specifying WC-185
map-class frame-relay command VC-394, WC-166
map-group command WC-165, WC-166
map groups
destination addresses for the SVC, specifying WC-167
map-list command WC-167
E.164 and X.121 addresses WC-167
map lists
configuration mode, summary FC-413
mapping
IP prioritization to ATM VC-171
name to DECnet address P3C-39
SMDS static routes WC-246
static address WC-191
mask destination command XC-74
mask preshared keys SC-389
masks
format in displays IPC-47
implicit, in IP access lists (example) IPC-122
See also subnet masks
mask source command XC-74
master control port, ATM XC-118, XC-142
master-slave arbitration
See Dual RSPs
match access-group command QC-118, QC-136
match address command MWC-44, SC-352, SC-355
match any command QC-402
match as-path command IPC-361, QC-49
match class-map command QC-402
match clns address command P3C-89
match clns interface command P3C-89
match clns next-hop command P3C-89
match clns route-source command P3C-89
match community-list command IPC-361, QC-48
match cos command QC-402
match destination-address mac command QC-402
matching inbound dial peers VC-139
match input-interface command QC-118, QC-136
match interface command IPC-362
match ip address command IPC-362, IPC-368, QC-44, QC-50
match ip dscp command QC-403
match ip next-hop command IPC-362
match ip precedence command QC-403
match ip route-source command IPC-362
match ip rtp command QC-403
match length command IPC-368, QC-44
match metric command IPC-362, P3C-89
match mpls experimental command QC-118
match nlri command IPC-347, IPC-348
match not command QC-403
match protocol command QC-74, QC-118, QC-136
match qos-group command QC-403
match route-type command IPC-362
match source-address mac command QC-403
match tag command IPC-362
max bandwidth command WC-129
max-calls command DC-336
max-conn command VC-693, VC-694
maxconns command IPC-142
max-forwards command VC-378
maximum burst size XC-221
maximum connections command VC-130
maximum-lus command BC-802, BC-809
maximum paths
Apollo Domain, setting P3C-11
AppleTalk, setting P2C-42
IPX
description P2C-145
XNS, setting P3C-128
maximum-paths command IPC-287, IPC-360
maximum reserved bandwidth QC-95, QC-112
max-lsp-lifetime command IPC-283, P2C-100
MAXOUT host value, SDLLC performance BC-426
max-redirects command VC-378
max-reserved-bandwidth command QC-95, QC-127, QC-132
max vc command WC-129
M-bit WC-272
MBONE (multicast backbone) IPC-394, IPC-519
RTP header compression IPC-425
MBONE (multicast backbone), RTP header compression QC-318
MCI interface card
pulsing DTR signal on IC-100
MCU, conference call VC-202, VC-207
MD5 (Message Digest 5) algorithm SC-335, SC-379
IKE policy parameter SC-383
neighbor router authentication SC-419
MD5 (Message Digest 5) authentication
EIGRP IPC-265
OSPF IPC-229
RIP IPC-203
TCP MD5 for BGP IPC-315
mdl command IC-115
mdn command VC-694
MED (Multi Exit Discriminator)
comparing routes from same subautonomous system IPC-319
in choosing a subautonomous system path in a confederation IPC-320
missing IPC-319
with value of infinity IPC-286
Media Gateway Controller. See call agent
Media Gateway Control Protocol VC-179
media translation, SDLLC, customizing BC-425
media-type command IC-35
media-type half-duplex command IC-88
memory
displaying use FC-286
GGSN PDP contexts, planning MWC-15
running out while booting from server FC-199
types, comparing FC-211
memory management, NBAR QC-35
memory usage
memory usage and certification authority interoperability SC-365
menu clear-screen command FC-105
menu command FC-106, FC-109, FC-111
menu-exit command FC-106
menu line-mode command FC-110
menus
configuration FC-104
deleting FC-112
description FC-103
display, configuring FC-110
entries, hidden FC-109
invoking FC-111
item, associating command with FC-106
submenus, creating FC-108
text FC-106
title FC-104
menu single-space command FC-110
menu status-line command FC-111
menu text command FC-106
menu title command FC-104
message identifiers, ATM WC-54
message logging
description FC-288
display device FC-289
enabling FC-289
enabling for slave card FC-289
facility types
(table) FC-292
history table FC-291
severity level FC-290
synchronizing with solicited output FC-290
timestamps FC-290
message-of-the-day, configuring FC-99
messages
access list violation IPC-88, IPC-91, P2C-127
banner tokens FC-99
debug output FC-88
host-failed FC-98
Internet broadcast, establishing IPC-33
IP, destination unreachable IPC-82
line-in-use FC-98
line-in-use, enabling TC-17
logging IPC-88, IPC-91, P2C-127
sending to other terminals FC-95
Telnet
failed connection TC-18
login TC-18
successful connection TC-18
suppress connection TC-19
vacant terminal FC-97
See also banners
method lists
(example) SC-18
AAA
accounting SC-81
authentication SC-21
description SC-17
metric holddown command IPC-218
metric maximum-hops command IPC-218
metrics
automatic translations between IP routing protocols IPC-363
BGP IPC-285
DVMRP IPC-530
EIGRP IPC-257
EIGRP, adjusting IPC-260
IS-IS link-state IPC-276
RIP IPC-199
routing
IPX P2C-4
XNS P2C-4
translations supported between IP routing protocols IPC-363
metrics, routing
VINES P3C-2
metric weights command IPC-217, IPC-261, P3C-71
MGC (Media Gateway Controller)
See call agent
MGCP VC-179
911 outgoing calls VC-182
application command VC-187
blocking new calls VC-189
call agent
address VC-182
purpose in VoIP network VC-5, VC-180
third-party vendor VC-5, VC-180
call connection VC-180
caller ID, support of VC-182
call waiting VC-182
ccm-manager MGCP command VC-188
ccm-manager redundant host command VC-188
ccm-manager switchback command VC-188
ccm-manager switchover-to-backup command VC-189
Cisco 2600
RGW configuration (example) VC-195
RGW functionality VC-182
supported platform VC-179
Cisco 3600
supported platforms VC-179
Cisco 3660, configuration (example) VC-193
Cisco AS5300
configuration (example) VC-190, VC-191
supported platform VC-179
TGW functionality VC-182
Cisco CallManager VC-188
Cisco uBR924
configuration (example) VC-194
RGW functionality VC-182
supported platform VC-179
Cisco VG200
Cisco CallManager VC-188
configuration (example) VC-196
configuring VC-188
supported platform VC-179
clear mgcp statistics command VC-189
configuration
examples VC-190
TGW with SGCP 1
general steps VC-183
connections, call construction VC-180
controller t1 command VC-184, VC-186
debugging VC-189
debug mgcp command VC-189
dial peers, configuring VC-180
dial-peer voice command VC-187
displaying
active call VC-189
Cisco CallManager settings VC-189
configuration settings VC-189
distinctive ringing VC-182
ds0-group command VC-184, VC-186
enabling
Cisco CallManager VC-188
dial peers VC-187
fax calls VC-185
modem calls VC-185
SDP subset VC-185
switchback VC-188
switchover VC-189
endpoints, in call construction VC-180
event packages, supported VC-180
FGD-OS calls VC-182
FXS port VC-182
gateway, purpose in VoIP network VC-180
graceful call termination VC-189
hairpinning, use of VC-180
initiating MGCP VC-184
Media Gateway Controller
See call agent
mgcp block-newcalls command VC-189
mgcp call-agent command VC-184, VC-186, VC-187
mgcp command VC-184, VC-186, VC-187
mgcp default-package command VC-185, VC-187
mgcp dtmf-relay command VC-185
mgcp modem passthru command VC-185
mgcp package-capability command VC-185, VC-187
mgcp restart-delay command VC-184
mgcp sdp simple command VC-185
migration from SGCP VC-181
monitoring the configuration VC-189
onhook caller ID, support of VC-182
overview VC-180
packages
definition VC-180
POTS dial peers VC-180
prerequisites for configuring VC-183
preventing new calls VC-189
PRI⁄ISDN signaling VC-182
residential gateway VC-181
restarting call operation VC-189
RGW
configuration (example) VC-194, VC-195, VC-196
examples of VC-181
functionality VC-182
illustration VC-181
RGW (Residential Gateway)
configuring VC-187
ring splash VC-182
SGCP, migration from VC-181
show ccm-manager command VC-189
show mgcp command VC-189
show run command VC-189
specifying
backup servers VC-188
call agent VC-184
default package VC-185
delay value VC-184
dtmf relay VC-185
event packages VC-185
SS7 calls VC-182
statistical counters VC-189
stutter dial tone VC-182
supported event packages VC-180
supported platforms VC-179
supported protocols VC-181
supported trunk types VC-182
TGW VC-182
configuration (example) VC-190, VC-191, VC-193
configuring VC-184
functionality VC-182
illustration VC-182
TGW (Trunking Gateway)
examples of VC-182
trunking gateway VC-182
UDP, use of VC-180
verifying the configuration VC-189
mgcp block-newcalls command VC-189
mgcp call-agent command VC-184, VC-186, VC-187
mgcp command, in MGCP VC-187
mgcp default-package command VC-185, VC-187
mgcp dtmf-relay command VC-185
mgcp modem passthru command VC-185
mgcp package-capability command VC-185, VC-187
mgcp restart-delay command VC-184
mgcp sdp simple command VC-185
MIB
AppleTalk P2C-3
CDP management FC-327
CiscoFlash FC-214
Cisco Round Trip Time Monitor (RTTMON) FC-340
GPRS MWC-16
IPX P2C-5
NLSP P2C-94
OSPF IPC-223
RFCs FC-311
RMON MIB FC-1
source-route bridging support BC-15, BC-84
Token Ring support BC-15, BC-84
Token Ring support, variables IC-71
X.25 LAPB, SNMP extension WC-16
X25 Packet Layer, SNMP extension WC-16
MICA In-Band Framing Mode Control Messages feature DC-83
microcode (7200) command BC-629, BC-630
microcode command BC-627, FC-207, FC-209
microcode images
description FC-207
determining FC-436
information, displaying FC-208
location, specifying FC-207
reloading FC-208
writable control store (WCS) FC-207
microcode images, loading BC-626to BC-631
microcode on the AIP WC-10
microcode reload
microcode reload (7200) command BC-629, BC-630
microcode reload command BC-627, FC-208, FC-209
mid command WC-55
migration path XC-99
migration strategy
hoot and holler VC-832
MIH BC-624, BC-646, BC-676, BC-735
MIH (missing interrupt handler)
configuration
VM host BC-625
missing interrupt handler
MLP (Multilink Point-to-Point Protocol)
(example) DC-626
bandwidth allocation DC-663
See also BACP
bundles DC-619
caller ID authentication DC-612
configuration (example) DC-197, QC-324
defined QC-321
dialer rotary, configuring DC-612
Distributed MLP
configuration (example) DC-631
configuring DC-618
overview DC-617
T3 configuration (example) DC-631
topology DC-617
interfaces
asynchronous DC-611
BRI multiple interfaces DC-612
BRI single interface DC-611
dialer rotary DC-612
synchronous DC-610
(example) 1
interleaving
configuring QC-322
packets QC-321
interleaving, weighted fair queuing DC-615
Inverse Multiplexer
configuration (example) DC-631
configuring DC-618
overview DC-617
T3 configuration (example) DC-631
topology DC-617
monitoring QC-323
multiple BRI DC-612
overview DC-610
real-time traffic
(example) DC-630
interleaving (example) DC-630
rotary group
BRI members, configuring DC-613
Stacker compression DC-199
virtual profiles
cloning sequence (table) DC-491
interoperability DC-491
weighted fair queuing DC-615
WFQ QC-321
MLS
cache XC-254
candidate packet XC-256
CAR
restrictions XC-269
configuration (examples) XC-275
configuring and monitoring XC-271
data encryption
restrictions XC-269
enabler packet XC-257
external routers
usage guidelines XC-254
features XC-255
implementation XC-253
media XC-268
NAT
restrictions XC-269
policy route-map
restrictions XC-269
TCP intercept
restrictions XC-269
terminology XC-254
with an extended access list, configuration (example) XC-277
with a standard access list, configuration (example) XC-276
without access lists, configuration (example) XC-275
MLSP
description XC-254
MLS-RP
description XC-254
mls rp ip multicast command XC-282
mls rp ip multicast management-interface command XC-283
mls rp ipx command XC-294, XC-295, XC-296
mls rp locate ipx command XC-296
mls rp management-interface command XC-295, XC-296
mls rp vlan-id command XC-295
mls rp vtp-domain command XC-294, XC-296
MLS-SE
description XC-254
MMLS-RP
interfaces, enabling on XC-282
IP multicast routing, enabling XC-282
overview XC-261
PIM, enabling on interface XC-282
MMLS-SE
overview XC-261
MMoIP (Multimedia Mail over IP)
configuring the dial peer VC-697
MMP (Multichassis Multilink PPP)
bundle DC-631
call handling and bidding DC-632
configuration requirements DC-633
dialer explicitly defined (example) DC-637
dialer not explicitly defined (example) DC-638
dialer not used (example) DC-636
digital and analog traffic DC-631
interfaces supported DC-634, DC-642
offload server (example) DC-638
overview DC-631
platforms supported DC-634, DC-642
PRI (example) DC-636
stack group members
call ownership DC-632
calls, answering DC-632
configuring DC-634
stack groups DC-632
typical configuration (example) DC-633
virtual interfaces, monitoring DC-635
virtual template interfaces
(caution) DC-636
configuring DC-635
virtual profiles
configuring 1
specifying 1
mnemonic addressing
character limitations TC-107
configuration (examples) TC-107
description TC-107
format options TC-107
mnemonic resolution, X.25 WC-299
MNLB (MultiNode Load Balancing)
Feature Set for LocalDirector
NetFlow cache, adjusting IPC-116
network configuration (figure) IPC-129
product description IPC-114
related documentation IPC-115
restrictions IPC-115
MNLB Forwarding Agent
affinities, displaying IPC-119
ContentFlow architecture IPC-115
memory allocation IPC-117
multicast routing, enabling on all interfaces to the services manager IPC-116
NetFlow switching IPC-116
operational status, displaying IPC-119
overview IPC-114
port number, specifying IPC-117
related documentation IPC-115
specifying IP and IGMP address IPC-117
wildcard blocks, displaying IPC-119
MNLB services manager, overview IPC-114
Mobile IP
AAA server IPC-164
agent advertisements IPC-161
agent discovery IPC-161
agent solicitations IPC-161
authentication IPC-163
care-of address IPC-162
configuration tasks IPC-167
denial-of-service attack IPC-163
deregistration IPC-162
foreign agents IPC-160, IPC-161
Foreign-Home Authentication Extension IPC-164
home agent redundancy
configuration examples IPC-178
configuration task list IPC-171
monitoring and maintaining IPC-176
operation IPC-165
overview IPC-165
verifying IPC-175
HSRP groups IPC-165
MNs (mobile nodes) IPC-160, IPC-161
Mobile-Foreign Authentication Extension IPC-164
Mobile-Home Authentication Extension IPC-163
mobility binding IPC-162
mobility binding table IPC-162
overview IPC-159
packet forwarding IPC-162
physical networks IPC-165
registration IPC-162
replay attacks IPC-163
routing IPC-162
security IPC-163
security associations, storing IPC-164
virtual networks IPC-165
mode atm command VC-727
mode ccs command VC-642, VC-644, VC-645, VC-661
model string mapping, TN3270 server (table) BC-773
modem answer-timeout command DC-31, DC-34
modem at-mode command DC-67
modem attention (AT) commands DC-66, DC-67
2-wire leased-line support DC-68
modem attention (AT) commands, hardware flow control on Telebit T-3000 modem TC-83
modem autoconfigure command DC-136
modem bad command DC-92
modem buffer-size command DC-86
modem busyout command DC-93
modem busyout threshold command DC-94
modem callin command DC-139
modem callout command DC-34
modem calls, MGCP support of VC-182, VC-183
modem connections
See modems, connections
modem country mica command DC-59
modem country microcom_hdms command DC-59
modem cts-required command DC-32
modem dialin command DC-29, DC-30, DC-60, DC-164
modem dtr-active command DC-29
modem hold-reset command DC-92
modem inout command DC-30
modem link-info poll time command DC-83
modem management
AT commands DC-67
busy out modem card DC-93
Call Tracker, configuring DC-81
connection speed, verifying DC-101
diagnostics DC-86
incoming V.110 modem calls DC-193, DC-194
inoperable modems DC-92
MIB traps DC-94
(example) DC-97
modem activity, monitoring DC-74
modem control function event buffer DC-92
NAS health, monitoring DC-94
reject incoming call DC-271
statistics
connected AT sessions DC-86
event polling DC-86
modem-mgmt csm debug-rbs command DC-759
Modem Passthrough over VoIP
configuring
global VC-782
modem pass-through over VoIP VC-777
configuring
dial-peer VC-783
global VC-782
modem poll retry command DC-86
modem poll time command DC-86
modem-pool command VC-704
modem pool configuration mode
summary FC-404
modem pooling
benefits DC-73
description DC-72
monitoring DC-74
physical partitioning
description DC-75
dial-in (example) DC-76
dial-in and dial-out (example) DC-78
network topology DC-76
restrictions DC-73
virtual partitioning
description DC-80
dial-in (example) DC-80
network topology DC-80
modem recovery-time command DC-92
modems
ARA, configuring TC-67
busyout cards in Cisco AS5800 DC-93
chat scripts DC-169
close connection DC-32
communication, starting DC-142
configuring using modem commands DC-66
connections
stopping DC-32
testing DC-141
troubleshooting DC-144
data compression DC-67, DC-145
DCD operation DC-139
dial-out DC-30
digital network module DC-209
direct Telnet sessions DC-142
displaying statistics DC-85
DTR interpretation DC-139
error correction DC-145
external, configuring DC-135, DC-136
features list DC-53
flowcontrol, configuring DC-139
high-speed
(figure) DC-30
configuring DC-29
incoming calls DC-139
rejecting by type DC-271
rejecting by type (example) DC-303
inoperable DC-92
integrated, configuring DC-53, DC-66
ISDN, use over DC-209
See also ISDN BRI
line configuration
continuous CTS (figure) DC-33
incoming and outgoing calls (figure) DC-31
modem call-in (figure) DC-140
modem call-out (figure) DC-35
line timing, configuring DC-31
log event, clearing DC-129
MICA
command summary DC-63
in-band framing mode control messages DC-83
link statistics, configuring DC-83
modem attention commands DC-66
PIAFS, enabling DC-323
Microcom, clearing DC-89
modem commands, integrated modems DC-67
NextPort SPE, command summary DC-63
non-V.25bis DTR DC-368, DC-396
overview DC-23
physical partitioning DC-75
protocols, enabling DC-126
remote IP users, enabling DC-126
reverse connections DC-34
show line command DC-128
Telebit T-3000, configuring TC-83
V.110
bit rate padding DC-194
screening incoming calls DC-193
V.120 asynchronous access DC-203
V.90 portware DC-210
V.90 standard DC-54
virtual partitioning DC-80
XRemote setup TC-53
modem shutdown command DC-92, DC-94
modem status-poll command DC-86
modes
certificate chain configuration, enabling SC-372
public key configuration, enabling SC-372
query, enabling SC-366
RA, enabling SC-367
See command modes
modular QoS CLI
function XC-171
ingress label switching router XC-171
Modular QoS Command-Line Interface
configuration (example) QC-406
configuration, verifying QC-406
configuring QC-401
description QC-397
MIB supported QC-399
monitoring APS IC-133
Monitoring Resource Availability on Cisco AS5300, AS5400, and AS5800 Universal Access Servers feature DC-94
MOP (Maintenanace Operation Protocol)
network server
loading boot system image files FC-200
request parameters
setting FC-200
server
booting automatically from FC-199
manually booting from FC-240
resending boot requests to FC-200
MOP (Maintenance Operation Protocol)
DECnet P3C-54
mop device-code command FC-200
mop enabled command P3C-54
mop retransmit-timer command FC-200
mop retries command FC-200
mop sysid command P3C-54
more commands, filtering output FC-33
more data bit, X.25 WC-272
more nvram
startup-config command BC-99
more nvram: command FC-146
more system: command FC-147
MOTD (message-of-the-day) banners
configuring FC-99
(example) FC-115
disabling on a line FC-101
using tokens in FC-99
motd-banner command FC-101
MPC (MultiPath Channel)
See CMPC
MPC+ (MultiPath Channel Plus)
See CMPC+
MPC configuration mode
summary FC-405
MPC-LEC and MPS-LEC Relationships XC-442
MPLS
architecture XC-116
backbone XC-167
configuration (examples) XC-187
configuring XC-176
destination prefix XC-175
distributed fair queueing, configuring XC-175
forwarding XC-102
functions XC-87
multi-VC mode in MPLS-enabled core, configuring XC-174
multi-VC using cos-map function, configuring XC-175
network XC-113
packets XC-115
PVC in non-MPLS-enabled core, configuring XC-174
sample network topology (figure) XC-144, XC-219
software XC-167
subinterface, creating XC-224
switching and routing features XC-116
traffic engineering, configuring XC-151, XC-152
verifying configuration XC-180
virtual private network XC-142
VPN
configuration (example) XC-196
configuration example XC-199
features XC-154
figure XC-104
security XC-98
verifying configuration XC-163
MPLS experimental field
function XC-116
setting XC-170
using XC-114
MPLS LSC
as an edge LSR XC-119
features of XC-116
supported devices XC-117
MPOA (Multiprotocol over ATM)
benefits XC-443
cache imposition reply XC-440
cache-imposition request XC-440
ELAN ID, configuring XC-388, XC-446, XC-452
frame processing XC-445
LANE clients XC-388
LANE interaction XC-441
MPC
configuration (example) XC-448, XC-454
configuration tasks XC-445
monitoring XC-447
MPS
configuration (example) XC-448, XC-454
configuration tasks XC-452
monitoring XC-454
network ID XC-452
shortcuts XC-452
virtual circuits XC-443
MPS-NHRP
routing interaction XC-451
resolution reply XC-440
resolution request XC-440
sample network topology (figure) XC-448
Token Ring
configuration (examples) XC-459
MPC to MPC Shortcut in an IP Routed Environment (figure) XC-459
MPC to MPC Shortcut in an IP SRB-Routed Environment (figure) XC-463
traffic flow XC-441
mpoa client config name command XC-446, XC-447
MPOA Client configuration mode
See MPC configuration mode
mpoa client name command XC-446
MPOA Server
See MPS
mpoa server config name command XC-453
mpoa server name command XC-453
mpoa server name trigger ip-address command XC-454
MPPC (Microsoft Point-to-Point Compression)
compression scheme DC-601
protocol field compression flag DC-603
MPPE encryption DC-510
MPS configuration mode
summary FC-405
mrinfo command IPC-517
MRM (Multicast Routing Monitor)
See IP multicast routing, MRM
mrm command IPC-516
MRM manager configuration mode
summary FC-405
mrouted protocol
See IP multicast routing, mrouted
MS (mobile station), (figure) MWC-12
MS Callback DC-651
configuring DC-652
LCP callback option DC-652
Microsoft Callback Control protocol (MSCB) DC-651
MS-CHAP (Microsoft Challenge Handshake Authentication Protocol)
configuration example SC-67
feature summary SC-53
MSDP (Multicast Source Discovery Protocol)
monitoring using SNMP FC-325
See IP multicast routing, MSDP
MSISDN (Mobile Station international PSTN/ISDN)
RADIUS requests
including in MWC-40
overriding in MWC-40
msisdn suppression command MWC-29, MWC-40
mstat command IPC-517
mta receive aliases command VC-696
mta receive generate-mdn command VC-696
mta receive maximum-recipients command VC-696
mta send mail-from command VC-692
mta send origin-prefix command VC-692
mta send postmaster command VC-692
mta send return-receipt-to command VC-692
mta send server command VC-692
mta send subject command VC-692
mtrace command IPC-517
MTU (maximum transmission unit)
definition IPC-82
IP
of path IPC-81
size, specifying IPC-82
ISO CLNS P3C-93
LSP size P3C-81
MTU caution IC-127
mtu command WC-50
MTU size, for ATM WC-50
multicast
See IP multicast routing
multicast command P2C-97
multicast fast switching
virtual interface
configuring VC-838
Multicast Forward VCC XC-368
multicast routing
configuring VC-838
See IP multicast routing
multicasts
address forwarding BC-35
transparent bridging (examples) BC-70, BC-73
multicasts, asynchronous serial traffic over UDP DC-171
Multicast Send VCC XC-368
multidrop SDLLC configuration (example) BC-435
multiflex trunk interface card
in high-density voice network module
configuring voice ports VC-844
multihoming
areas P3C-74
IS-IS areas P3C-74
ISO CLNS P3C-74
multi-interface load splitting, configuring IPC-361
multilink command DC-751
multilink transmission groups
configuration BC-345
design recommendations BC-345
multilink virtual-template command DC-483, DC-489, DC-635, QC-323
multimedia application protocol support
H.323 SC-228
protocols (table) SC-226
RTSP SC-227
multimedia conference call
configuring (example) VC-350
inter-zone VC-203
intra-zone VC-5, VC-203, VC-205
intra-zone MCU VC-207
Multimedia Conference Manager
overview VC-289
multiple codecs
configuration (example) VC-287
configuring VC-276
verifying configuration VC-277
multiple LVC model XC-167
multiple switch types
BRI interface, configuring DC-186
PRI interface
configuration (example) DC-302
configuring DC-274
restrictions DC-274
multipliers, regular expression DC-864
multiport source-route bridging (examples) BC-87, BC-125
multiprotocol BGP (Border Gateway Protocol)
address, aggregate IPC-351
benefits IPC-341
description IPC-341
DVMRP routes, redistribute IPC-349
enabling
peer IPC-345
peer group IPC-345
restrictions IPC-342
route reflector, configuring IPC-350
multiprotocol SMDS configuration (example) WC-253
multiprotocol X.25 WC-279
multiring all command BC-149, BC-177
multiring command BC-93
multiring trcrf-vlan command BC-149, BC-177
multi-VC mode
BPX1 and BPX2 XC-230
configuration (example) XC-229
edge LSR1 XC-230, XC-231, XC-233, XC-234, XC-239
LSC1 XC-229
LSC2 XC-230
MPLS-enabled core XC-174
multizone VC-224
music-threshold command VC-92, VC-841
N
Nagle algorithm
enabling FC-279
nailing, inverse DNS
(examples) BC-841
configuration BC-811
description BC-775
verification BC-823
name-connection command FC-93
named IP access lists IPC-89
named IPX access lists P2C-125
name display facility, AppleTalk P2C-26
named-key command SC-372, SC-388
name elan-id command XC-388, XC-446, XC-452, XC-458
name ELAN preempt command XC-391
name local-seg-id command XC-381to XC-384, XC-458
name mapping
DECnet address P3C-39
NETs P3C-86
NSAPs P3C-86
names
assinging to connections FC-93
router FC-260
name server-atm-address command XC-381to XC-384, XC-420, XC-422, XC-423, XC-458
naming, dynamic LU
(examples) BC-840
description BC-774
verification BC-821
Nariwake
and Enhanced Voice Services for Japan VC-860
NAS (network access server)
call type matching DC-727
Cisco RPMS DC-729
definition DC-508
RPM
standalone DC-729
See also VPN, NAS
NASI (NetWare Access Server Interface)
client location requirements TC-90
GNS requests TC-91
network resource access TC-89
RCONSOLE line TC-90
SAP filters, configuring TC-91
NAS-initiated VPNs DC-509
NAT (Network Address Translation)
(example) DC-479
automatic timeout DC-479
configuring IPC-35
dialer interface, defining DC-478
displaying translations IPC-46
dynamic entries, clearing IPC-46
dynamic translations IPC-38, IPC-39
Easy IP DC-475
inside
global address IPC-36
local address IPC-36
source translation IPC-37
source translation (example) IPC-61
IP Phone to Cisco CallManager, support of IPC-46
LAN interface, defining DC-477
MLS
restrictions XC-269
NAT pool, defining DC-477
outside
global address IPC-36
local address IPC-36
overlapping
address (example) IPC-62
addresses IPC-41
overloading
global address IPC-39
global address (example) IPC-62
overview IPC-35
server load balancing, configuring for IPC-138
static translations IPC-38
TCP load distribution IPC-43
TCP load distribution (example) IPC-63
timeouts IPC-45
NAT, configuring IPSec for SC-339
NAT, H.323 proxy VC-300
national bit command IC-121
native VLAN ID XC-316
nat server command IPC-145
NBAR (Network-Based Application Recognition)
benefits QC-31
configuration (examples) QC-76
configuring QC-73
memory management QC-35
PDLMs QC-35
restrictions QC-40
supported protocols QC-36
traffic classification QC-33
used with Protocol Discovery feature QC-34
verifying QC-76
NBMA (nonbroadcast multiaccess) network XC-439
address advertised as valid IPC-26
definition IPC-18
establishing NHRP (figure) IPC-19
logical versus physical (figure) IPC-52
NBP (Name Binding Protocol) P2C-2
description P2C-26
name registration, task table P2C-55
services P2C-55
NCIA (Native Client Interface Architecture)
client/server model BC-227, BC-473, BC-474
configuration (examples) BC-487to BC-490
DLSw+ configuration
(example) BC-488
description BC-479
local peer, defining BC-478, BC-480
NCIA server configuration BC-481
remote peer, defining BC-480
source-bridge ring group, defining BC-480
task list BC-480
DLSw+ local switch session configuration
(example) BC-487
description BC-477
task list BC-478
DSPU session configuration
(example) BC-489
description BC-481
downstream PU, defining BC-482
local SAP, enabling BC-483
LU, defining BC-483
NCIA server configuration BC-483
task list BC-482
upstream host, defining BC-482
feature description BC-226
monitoring and maintaining BC-486
NCIA data-link control BC-227, BC-475
RSRB session configuration
(example) BC-490
description BC-483
DLSw+ local peer, defining BC-485
NCIA/RSRB interface configuration BC-486
NCIA server configuration BC-486
remote peer, defining BC-485
source-bridge ring group, defining BC-485
task list BC-484
server configuration BC-478
ncia rsrb command BC-486
ncia server command BC-479, BC-481, BC-486
ncia start command BC-486
ncia stop command BC-486
NCP (Network Control Program)
DECnet parameters P3C-3
definitions, SDLLC configuration BC-442
T1 timer BC-445
NDE (NetFlow Data Export), configuring XC-275
NDIS-compliant LAN drivers
with ATM LANE XC-319
NEC Fusion
Fusion Call Control Signaling VC-634
neighbor (IGRP) command IPC-215
neighbor (OSPF) command IPC-227, IPC-228
neighbor (RIP) command IPC-201
neighbor activate command IPC-345
neighbor adjacency changes, logging
AppleTalk Enhanced IGRP P2C-49
IPX Enhanced IGRP P2C-156
neighbor advertisement-interval command IPC-313
neighbor database-filter command IPC-238
neighbor default-originate command IPC-313
neighbor description command IPC-313
neighbor distribute-list command IPC-296
neighbor ebgp-multihop command IPC-313
neighbor filter-list command IPC-300
neighbor maximum-prefix command IPC-313
neighbor next-hop-self command IPC-301
neighbor password command IPC-314
neighbor peer-group command IPC-312
neighbor remote-as command IPC-289, IPC-344
neighbor route-map command IPC-303, IPC-347
neighbor router authentication
See authentication, neighbor router
neighbor route-reflector-client command IPC-311
neighbors, BGP
disabling IPC-316
enabling a previously disabled neighbor IPC-316
neighbors, ISO CLNS P3C-85
neighbor send-community command IPC-305
neighbor shutdown command IPC-316
neighbor soft-reconfiguration inbound command IPC-314
neighbor stations, VINES P3C-25, P3C-26
neighbor timers command IPC-318
neighbor update-source command IPC-313
neighbor version command IPC-302
Net/One
booting protocol P3C-121
differences from XNS P3C-121
emulation mode
enabling P3C-124
receiving RIP updates P3C-122
Ungermann-Bass P3C-122
flooding broadcasts P3C-122
metrics, routing P3C-5, P3C-122
network management
consoles, configuring P3C-122
protocols P3C-122
network resource monitor P3C-122
RIP updates P3C-121
routing, enabling P3C-124, P3C-133
routing protocol P3C-121
NetBEUI (NetBIOS Extended User Interface)
connection information DC-584
remote clients over PPP DC-584
NetBIOS (Network Basic Input/Output System)
access control
filtering BC-109
using byte offset BC-110
using station names BC-110
access filter configuration (example) BC-136, BC-140
cache, adding a static entry (example) BC-133
dead-time interval specification BC-101
IPX
filtering messages P2C-133
name caching
creating static entry BC-101
enabling BC-100
support configuration BC-98
NetBIOS, IPX P2C-132
access control P2C-132
filters (example) P2C-177
messages, filtering P2C-133
netbios access-list bytes command BC-111
netbios access-list command P2C-128
netbios access-list host command BC-110
netbios enable-name-cache command BC-100
netbios input-access-filter bytes command BC-111
netbios input-access-filter host command BC-110
netbios name-cache command BC-101
netbios name-cache query-timeout command BC-101
netbios name-cache recognized-timeout command BC-101
netbios name-cache ring-group command BC-101
netbios name-cache timeout command BC-100
netbios-name-server command IPC-69
NetBIOS name servers, available to the client IPC-68
NetBIOS node type, selecting IPC-69
netbios-node-type command IPC-69
netbios output-access-filter bytes command BC-111
netbios output-access-filter host command BC-110
netbooting
See booting from a network server
net command
ISO IGRP P3C-70
accounting benefits XC-69
cache XC-71
customizing number of entries XC-71
cache size, adjusting IPC-116
configuration (example) XC-76
configuring XC-70
description XC-69
destination-prefix aggregation
configuration (example) XC-82
minimum mask, configuring XC-74
exporting cache entries XC-71, XC-73
exporting information to network management applications XC-71
free-flow queue XC-71
identifying packet flows XC-69
IP
flow cache XC-72
policy routing XC-66
prefix aggregation
configuration (example) XC-76
minimum mask, configuring XC-74
source-prefix aggregation
minimum mask, configuring XC-74
statistics XC-72
switching
cache entries IPC-116
description XC-53
enabling on interfaces IPC-116
traffic control XC-69
traffic performance XC-69
NetFlow aggregation
minimum mask
default value XC-75
description XC-65
NetFlow services, RSVP attachment to QC-267
netmask, definition IPC-47
NETs (network entity titles)
configuring P3C-70
ISO CLNS addresses P3C-63
ISO IGRP, number per router P3C-70
name mapping P3C-86
NetWare Link Services Protocol (NLSP)
Enhanced IGRP route redistribution P2C-89
(example) P2C-163
RIP packets
processing P2C-115
network
commerce XC-97
core XC-98
design XC-318
IPX MLS
topology (figure) XC-267
management XC-313
VlanDirector XC-318
management applications
NetFlow statistics XC-71
monitoring XC-143
performance XC-318
point-to-point overlay XC-98
provider XC-98
scalability XC-318
security XC-318
services
accounting XC-313
QoS XC-313
security filtering XC-313
topology XC-318
network access devices TC-1
network backdoor command IPC-317
network-based billing number
gateway support VC-228
network-clock base-rate command VC-725, VC-727, VC-736, VC-798
network-clock-priority command VC-592
network clocks and controllers
configuring VC-733
network-clock-select command VC-804, VC-808, VC-810, WC-92
network command MWC-46, P2C-87, P2C-111, P2C-112, VC-339, VC-344
configuring the DHCP address pool and mask IPC-68
creating an IGRP routing process IPC-215
enabling BGP IPC-289
enabling EIGRP IPC-259
enabling OSPF IPC-225
enabling RIP IPC-200
network configuration files
comparison with host configuration files FC-173
description FC-173
loading from a server FC-174
use in AutoInstall FC-51
network congestion, defined QC-9
network connectivity
testing FC-287
network diameter, enforcing (IGRP) IPC-218
network-id command XC-453
network management consoles, Net/One P3C-122
network masks, format IPC-47
network numbers
Apollo Domain P3C-7
BGP IPC-285
OSPF IPC-230
VINES P3C-15
XNS P3C-122
network numbers, IPX P2C-79
network operating system
See NOS
network performance, monitoring
SA Agent FC-339
network resource monitor, Net/One P3C-122
networks
edge
traffic-shaping tools VC-170
hybrid XC-99
queueing VC-166
switched XC-321
Network Time Protocol
See NTP
network timing services
(example) WC-117
configuring WC-91
network trunks
out-of-service VC-535
Next Hop Resolution Protocol
See NHRP for IP
Next Hop Resolution Protocol (NHRP) for IPX
next hop server P2C-117
next-hop-self address forwarding XC-112
Next Hop Server
See NHRP for IP, Next Hop Server; NHRP for IPX, Next Hop Server
NFAS (Non-Facility Associated Signaling)
alternate route index DC-320
configuration (example) DC-328
configuring DC-320
groups, monitoring DC-323
NTT PRI
configuring DC-321
verifying DC-321
prerequisites DC-320
PRI groups, configuring DC-319, DC-320
switch types DC-320
NFFC (NetFlow Feature Card)
description XC-254
NHRP (Next Hop Resolution Protocol)
enabling P2C-116
IPX
holdtime P2C-119
initiation, controlling P2C-118
loop detection P2C-119
next hop server P2C-119
packet rate P2C-118
record options, suppressing P2C-119
requests, triggering P2C-118
time addresses P2C-119
resolution reply XC-440
resolution request XC-440
servers XC-441
NHRP (Next Hop Resolution Protocol) for IPX
access lists P2C-118
authentication P2C-117
cache
dynamic entries, clearing P2C-157
monitoring P2C-157
static entries, clearing P2C-157
initiation, controlling P2C-118
next hop server P2C-117
static IPX-to-NBMA address mapping P2C-117
task list P2C-116
traffic, monitoring P2C-157
NHRP for IP
(example) IPC-51
access list IPC-22
authentication IPC-22
cache clearing
dynamic entries IPC-49
static entries IPC-49
cache monitoring IPC-49
Cisco implementation IPC-18
configuration task list IPC-20
enabling IPC-21
hold time IPC-26
initiation, controlling IPC-22, IPC-23
interfaces supported IPC-18
loop detection IPC-26
Next Hop Server
as responder IPC-26
configuring IPC-21
definition IPC-19
packet rate IPC-25
record options, suppressing IPC-26
requests, triggering IPC-23
server-only mode IPC-27
static IP-to-NBMA address mapping, configuring IPC-21
time addresses advertised as valid IPC-26
traffic monitoring IPC-49
tunnel (example) IPC-58
tunnel network IPC-27
Virtual Private Network IPC-19
NLRI (network layer reachability information)
keywords IPC-344
NLRI to address family configuration, converting IPC-344
NLSP (NetWare Link Services Protocol) P2C-100
adjacencies P2C-156
adjacency state P2C-156
CSNP interval, specifying P2C-88, P2C-98, P2C-99
database P2C-156
default routes, advertising P2C-150
designated router
definition P2C-98
election priority, specifying P2C-98
pseudonode P2C-98
Enhanced IGRP route redistribution P2C-115
GNS queries, replying to P2C-145
hello interval, specifying P2C-99
hop count, maximum from RIP updates P2C-88, P2C-98
interface, enabling on
LAN P2C-95
WAN P2C-95
internal network number, setting P2C-94
link delay, specifying P2C-98
LSP (link-state packet) P2C-99, P2C-100
metric, specifying P2C-97
MIB P2C-94
multicast addressing
disabling P2C-97
disabling (examples) P2C-162
multiple encapsulations P2C-83, P2C-95
neighbors P2C-156
partial route calculation, setting interval P2C-100
pseudonode P2C-98
RIP entries, aging out P2C-141
RIP packets
maximum size P2C-143
route aggregation
aggregated routes P2C-101
area addresses P2C-101
area addresses and route summaries P2C-101
benefits P2C-103
configuration task list P2C-105
customized route summarization P2C-104
default route redistribution P2C-102
default route summarization P2C-103
Enhanced IGRP and NLSP 1.1 P2C-110
filtering and route summarization, relationship P2C-104
multiple NLSP 1.1 areas
(example) 1
multiple NLSP 1.1 areas, configuring P2C-105
multiple NLSP versions in a single area, mixing P2C-102
NLSP 1.1, Enhanced IGRP, and RIP (example) P2C-164
NLSP 1.1 and NLSP 1.0 areas
(example) 1
NLSP 1.1 and NLSP 1.0 areas, configuring P2C-107
path selection P2C-104
RIP and NLSP 1.1, configuring P2C-113
route summaries P2C-101
route summarization P2C-103
service selection P2C-104
single versus multiple areas P2C-101
route aggregation, configuring P2C-100
SAP
entries, aging out P2C-143
packets, maximum size P2C-141
shortest path first algorithm (SPF)
calculation interval P2C-100
configuration (example) P2C-157
shutting down (example) P2C-158
throughput, specifying P2C-98
NLSP Multicast Support
node numbers, IPX P2C-79
NMS (network management system), IP address detection WC-171
NMVT (network management vector transport), VTAM compatibility BC-779
no boot system command FC-246
no channel-group command IC-49
node P3C-34
node configuration XC-140
no digit-strip command VC-152
no flush-at-activation command DC-84
no form of a command
using FC-22
no frame-relay ip tcp header-compression command WC-204
no half-duplex controlled-carrier command IC-147
no history command FC-24
no ip address command IC-49
no ip inspect command SC-250
no ip load-sharing per-destination command XC-39
no menu command FC-112
nonbroadcast, multiaccess (NBMA) network
addresses advertised P2C-119
logical versus physical (figure) P2C-166
nonbroadcast, multiaccess network
See NBMA network
nonbroadcast networks, configuring OSPF IPC-227
nonces
See RSA encrypted nonces
nonextended network, AppleTalk P2C-8
non-linear command VC-96
nonrecursive accounting data
displaying XC-34
enabling XC-41
nonrepudiation SC-380
NonResvSendLimit object, configuring QC-308
NOS
encapsulation IC-174
tunneling IC-174
no shutdown command VC-734, VC-844, WC-19
no slave terminal command FC-445
no terminal history size command FC-24
Novell Ethernet_802.2
encapsulation
formats XC-332
Novell IPX
in VLANs XC-321
See IPX
VLANs
configurable encapsulation XC-321
NPM interface types WC-4
NRP (Node Resource Processor)
ATM switch, controlling XC-140
configuring XC-231
faults XC-141
functions XC-137
MPLS, running XC-137
position, displaying XC-178
virtual circuits, configuring XC-138
NRZI (nonreturn to zero inverted)
encoding IC-98
nrzi-encoding command IC-99
nsap command VC-749
NSAPs (network service access points)
(example) WC-103
addresses, configuring WC-30, WC-31
addresses to media addresses, mapping P3C-84
address rules P3C-66
address structure (figure) P3C-65
area addresses P3C-64
domains, ISO IGRP P3C-64
dynamic routing P3C-63
ESI and selector fields, configuring WC-31
field formats P3C-64
fields P3C-63
GOSIP format P3C-66
IS-IS addresses P3C-64
ISO CLNS addresses P3C-63
ISO documentation P3C-4
ISO IGRP addresses P3C-64
Level 1 routing P3C-64, P3C-65
media addresses, mapping P3C-85
name mapping P3C-86
prefix P3C-84
shortcut command P3C-86
SNPA (subnetwork point of attachment) mapping P3C-85
static address, assignments P3C-83
n-selector
IS-IS P3C-65
ISO CLNS P3C-63
ISO IGRP P3C-64
NSF (Network-Specific Facilities)
call-by-call support
configuring DC-273
restriction DC-273
NSP (Node Switch Processor)
Cisco 6400 UAC, configuring XC-231
functions XC-137
NTP (Network Time Protocol)
(examples) FC-282
authentication FC-270
authoritative time server
configuring router as FC-271
configuring FC-266
description FC-265
external reference clocks
attaching FC-272
hardware clock, updating FC-271
services, disabling FC-270
source address FC-271
status FC-277
strata concept FC-265
time
services FC-265
synchronizing FC-265
ntp access-group command FC-269
ntp authenticate command FC-270
ntp authentication-key md5 command FC-270
ntp broadcast client command FC-268
ntp broadcastdelay command FC-269
ntp broadcast version command FC-268
ntp disable command FC-271
ntp master command FC-271
ntp peer command FC-268, FC-271
ntp server command FC-268, FC-271
ntp source command FC-271
ntp trusted-key command FC-270
ntp update-calendar command FC-272
nuisance telephone call refusal service
and Enhanced Voice Services for Japan VC-861
null bytes
end of string FC-83
null interface, configuring IC-174
number character
privileged EXEC prompt FC-12
number command DC-739
number expansion VC-155
numbering-type command VC-147
numbering type matching VC-147
num-exp command VC-155
NVRAM
description FC-212
file compression FC-162
O
Oakley key exchange protocol SC-378
See also IKE
OAM (Operations, Administration, and Maintenance)
(example) WC-101
loopback cells, configuring WC-24, WC-36
management
configuration (example) WC-105
configuring WC-41, WC-43, WC-44
overview WC-6
oam-bundle command QC-358
oam-pvc manage command WC-43
oam retry command QC-358, WC-25, WC-36, WC-43, WC-44
OC-12c port adapter, configuring IC-128
O character
in TFTP session output FC-245
meaning in copy output FC-178
ODI-compliant LAN drivers
with ATM LANE XC-319
ODR (On-Demand Routing)
configuration tasks IPC-195
default routes IPC-196
description IPC-195
disabling propagation of stub routing information IPC-196
enabling IPC-196
information, filtering IPC-197
redistributing IPC-197
routes populating the IP routing table IPC-196
stub routing information IPC-196
timer IPC-197
offload alias command BC-659
offload command BC-620, BC-658
off-ramp gateway
configuring VC-695
offset-list command IPC-201, IPC-215, IPC-262
offsets, applying IPC-201, IPC-215, IPC-262
one-stage dialing VC-142
onhook caller ID, MGCP support of VC-182
on-hook detection WC-90
OOS (out-of-service) trunks
description VC-535
operating system image
See system images
operation command VC-49, VC-842
organizing voice network data
creating a dial peer configuration table VC-127
OSI
See ISO CLNS
OSPF (Open Shortest Past First), broadcasts on X.25 WC-282
OSPF (Open Shortest Path First)
address range for a single route, specifying IPC-230
administrative distances IPC-233
aging pacing IPC-235
area parameters, configuring IPC-228
authentication for an area, enabling IPC-229
authentication key, specifying IPC-225
authentication type for interface, specifying IPC-226
autonomous system router configuration (example) IPC-246, IPC-380
basic configuration (example) IPC-245, IPC-379
broadcast networks, configuring IPC-226
broadcast or nonbroadcast networks, configuring for IPC-226
checksum pacing IPC-235
Cisco implementation IPC-223
complex configuration (example) IPC-249, IPC-383
conditional default origination
configuring IPC-231
configuration (examples) IPC-241
configuration task list IPC-224
cost differentiation IPC-232
default external route cost, assigning IPC-229
default routes, generating IPC-231
distance IPC-233
DNS name lookup IPC-232
enabling IPC-225
flooding reduction IPC-238
hello interval, setting IPC-225
ignore MOSPF LSA packets IPC-238
interface, configuration IPC-225
IP multicast IPC-223
IRDP advertisements to multicast address, sending IPC-29
link-state retransmission interval, setting IPC-225
LSA flooding, blocking IPC-238
LSA group pacing IPC-235, IPC-237
LSAs to be flooded, displaying IPC-240
MD5 (Message Digest 5) authentication IPC-226
enabling IPC-226
enabling for an area IPC-229
metrics, controlling IPC-232
MOSPF packets, ignoring IPC-238
multicast, IP IPC-223
multicast addressing IPC-226
neighbor command IPC-228
neighbor state changes, viewing IPC-235
network type, configuring IPC-226
nonbroadcast networks, configuring IPC-227
NSSA (not so stubby area) IPC-229
defining an NSSA IPC-229
on-demand circuit IPC-234
packet pacing IPC-239
path cost, specifying IPC-225
point-to-multipoint (example) IPC-241
point-to-multipoint, description IPC-226
refresh pacing IPC-235
route calculation timers, configuration IPC-233
router "dead" interval, setting IPC-225
route redistribution (example) IPC-245, IPC-378
router ID, forcing choice of IPC-232
router priority, setting IPC-225
route summarization IPC-230
simplex Ethernet interfaces, configuring IPC-233
stub area, defining IPC-229
summarization of routes IPC-230
transmission time for link-state updates, setting IPC-225
virtual link, establishing IPC-231
OSPF (Open Shortest Path First), LSC redundancy, using XC-123
ospf database-filter command IPC-238
OUI (Organizational Unique Identifier), Ethernet Type II frames BC-28
Outbound Circuit-Switched X.25 Support feature DC-232
outbound dial peers, matching VC-140
outbound resets, BGP IPC-292
output
notifications, enabling FC-85
show and more commands
filtering and searching FC-33
output attenuation command VC-97
output-delay command IPC-208
output packet size, setting WC-271
output window size, setting WC-271
overview VC-500
click-to-talk VC-505
enhancements VC-501
public key infrastructure multiple roots VC-503
roaming VC-501
user-network interface OSP VC-504
owner command FC-345, FC-354, FC-356
P
PA-12E/2FE port adapter
configuration example IC-75
configuring IC-38
monitoring IC-39
PA-4R-DTR port adapter IC-72
PA-A1 interface (ATM Lite) XC-221
PA-A3 interface XC-222
packages
MGCP support of VC-180
packet classifications
See classification
packet dispatch character
setting FC-86
packet fragmentation
See CBAC, IP packet fragmentation
Packet-Level Protocol (PLP) restarts WC-276
packet-level restarts, disabling WC-276
packet loss prevention, traffic shaping QC-211
packet-over-SONET
See POS
packet rewrite
IPX MLS XC-265
packets
bandwidth XC-114
bandwidth consumption
IP tax VC-165
classfying VC-167
IP Precedence VC-167
classification XC-114
compressed TCP/IP header WC-283
congestion avoidance
TCP VC-171
discard XC-167
dispatch FC-85
filtering
route maps VC-167
forwarding between autonomous systems XC-110
from customer XC-98
from VPN XC-98
high-speed transport VC-171
IP XC-113
padding for IPX XC-20
prioritizing XC-170
prioritizing for IP XC-170
queueing VC-166
rate-limiting VC-170
routes
tracing FC-288
X.25 sequence numbering WC-268
packets, interesting DC-402
packet size
setting
for SNMP FC-315
packet-switched nodes
DDN X.25 WC-312
packet-switched nodes, DDN X.25 WC-16
packet tunneling, and asynchronous host roaming IC-180
PAD (packet assembler/disassembler)
French service signals TC-102, TC-114
mnemonic remote addressing
character limitations TC-107
configuration (examples) TC-107
description TC-107
format options TC-107
network topologies TC-93
parameters
(example) TC-111
(table) TC-98
setting TC-97
PPP over X.25
(example) DC-855
overview DC-854
subaddressing
configuring TC-106
debug output TC-117
line command output TC-117
TTY lines (examples) TC-117
vty lines (examples) TC-116
X.28 mode
applications TC-96
configuration (examples) TC-109
configuring TC-99
overview TC-95
prompt TC-100
X.3 parameters, configuring TC-102
X.3 PAD EXEC mode
configuration (examples) TC-111
connections TC-93
switching sessions TC-96
X.3 parameters TC-97
XOT, enabling TC-105
PAD (packet assembler/disassembler), access on X.25 WC-282
pad command TC-96, TC-123, TC-128
padding
changing character FC-82
padding command FC-82
padding packets, IPX P2C-150
PADI (PPPoE Active Discovery Initiation) WC-130
PADO (PPPoE Active Discovery Offer) WC-130
PADR (PPPoE Active Discovery Request) WC-130
PADS (PPPoE Active Discovery Session) WC-130
PA-E3 port adapter
configuration (example) IC-152
monitoring IC-122
troubleshooting IC-121
PAM (port to application mapping)
CBAC operation SC-322
configuration examples SC-326to SC-327
configuring
access lists SC-325
port mapping SC-325
verifying SC-325
default port mapping SC-322
host-defined mapping SC-322
host-specific mapping SC-324
how PAM works SC-321
mapping information, saving SC-323
mapping types
system-defined SC-322
monitoring and maintaining SC-326
operation with CBAC SC-322, SC-324
port range, defining SC-323
registered ports SC-322
deleting SC-322
port numbers (table) SC-322
registered ports SC-322
table SC-322
well-known ports SC-322
table SC-322
user-defined mapping SC-322, SC-323
verifying SC-325
well-known ports SC-322
when to use SC-324
PAP (Password Authentication Protocol)
authentication request DC-598
CHAP authentication order DC-598
description SC-49
enable authentication SC-50
enabling TC-144
outbound authentication SC-51
refuse authentication request SC-52
vty lines, PPP TC-144
PA-POS-OC3 Packet OC-3 Port Adapter, packet-over-SONET OC3 configuration IC-153
parallel channel attachment
parallel channel CMPC+ support BC-733
parameter command TC-103
parentheses
regular expressions, using in DC-866
parity
configuring for a line FC-87
parity, configuring TC-12
parity command TC-12
parser
See CLI
parser cache command FC-165
partition flash command FC-215
partitions
Flash memory
benefits FC-214
configuration tasks FC-215
supported systems FC-214
passenger protocol, tunneling IC-174
passive-interface command IPC-233, IPC-364
passive-reply mode, Frame Relay end-to-end keepalive WC-184
passthrough, RSRB (example) BC-273
pass-through mode
video, configuring VC-725
password command SC-195, TC-13
passwords
configuration (examples) SC-414to SC-416
configuring
enable password SC-404
enable secret SC-404
line password SC-405
static enable password SC-404
encrypting SC-405
(caution) SC-405
IS-IS
area, assigning on IPC-281
authentication IPC-281
domain, assigning on IPC-281
interface, assigning on IPC-278
IS-IS for CLNS
area, assigning on P3C-78
authentication P3C-78
configuring P3C-78
domain, assigning on P3C-78
interface, assigning on P3C-78
recovering lost enable passwords
procedure 1 SC-409
procedure 2 SC-410
procedures (tables) SC-408
process SC-408
recovering lost line passwords
diagnostic mode settings (table) SC-413
passwords, enabling TC-13
PA-T3 port adapter
configuring (example) IC-153
monitoring IC-124
troubleshooting IC-124
path argument configuration, CMCC features BC-620to BC-622
path command BC-662
path cost, transparent bridging, assigning BC-51
Path MTU Discovery
understanding IPC-81
when the router acts as a host IPC-111
when the router acts as a router IPC-81
paths
Apollo Domain, setting maximum P3C-11
XNS, setting maximum P3C-128
paths, configuring QC-276
paths-of-statistics-kept command FC-347
pattern matching
(examples) TC-200
See also regular expressions
patterns
regular expression multiple-character
anchoring DC-865
creating DC-863
description DC-862
multipliers DC-864
regular expression single-character
anchoring DC-865
creating DC-862
description DC-862
multipliers DC-864
payload compression
enabling WC-199
See also Frame Relay, payload compression
PBR (policy-based routing)
classification QC-6
configuration (example) QC-46
configuring QC-43
enabling QC-43
features QC-24
IP precedence, setting QC-244
overview QC-24
route maps QC-24
when to use QC-25
PBX switches, disconnecting VC-83
PBX voice interfaces
T1/E1, monitoring VC-536
PCA (Parallel Channel Adapter) BC-243, BC-612
PCbus LAN management IC-73
PCM (Physical Connection Management), FDDI IC-54
PCMCIA Flash memory cards
copying the running configuration to (example) FC-172
copying to (example) FC-170
deleting files from (example) FC-171
formatting FC-218
spare sectors FC-219
PCPA (Parallel Channel Port Adapter)
channel data rates BC-244, BC-614
CPA overview BC-243
PDLM (Packet Description Language Module), described QC-35
PDN (public data network)
CMNS (example) WC-332
datagram transport (figure) WC-277
X.25 WC-15
PDN (public packet data network)
connections, configuring MWC-27
GGSN access points, configuring for MWC-28
PDP (packet data protocol) contexts, number supported MWC-15
PDU error
See ERPDU
PE (provider edge routers) XC-98
CE routing sessions, configuring to XC-155
function XC-115
PE routing sessions, configuring to XC-155
static route CE routing sessions, configuring to XC-157
peak rates
DSBM candidate, configuring QC-308
shape, configuring QC-230
peer default ip address command DC-151, DC-607
peer default ip address pool command DC-607
peer default ip address pool dhcp command DC-607
peer description SC-336
peer groups
enabling a previously disabled peer group IPC-316
peer groups, BGP
disabling IPC-316
peer model XC-98
peer neighbor-route command DC-608
PEM (Password Expiration Management) feature BC-586
per-class WFQ XC-168
per-flow WFQ XC-168
per-interface WRED XC-168
periodic command FC-278
permit command IPC-90
per-user configuration
AAA
RADIUS server, configuring DC-703, DC-731
server storage location DC-695, DC-717
TACACS server user profile (example) DC-488
authentication and authorization phases DC-697
AV pairs (table) DC-699
debugging commands (table) DC-704
dial-in features DC-695
IP
TACACS (example) DC-705
virtual profiles (example) DC-705, DC-708
IP address pooling
operational process DC-697
IPXWAN, virtual profiles serial interface (example) DC-707, DC-714, DC-738
large-scale dial-out DC-697
monitoring DC-704
overview DC-695, DC-696, DC-717
RADIUS
IP (example) DC-708
IPX (example) DC-714
TACACS server
CiscoSecure, configuring DC-702
freeware DC-702
freeware (example) DC-707, DC-738
virtual access interfaces
creation DC-697
duration and resources DC-697
selective creation DC-485
selective creation (example) DC-487
VPN DC-538
per-VC WRED XC-222
PFS (perfect forward secrecy) SC-336, SC-380
PGM (Pragmatic General Multicast)
See IP multicast routing, PGM
Phase 1
See AppleTalk, Phase 1
Phase 2
See AppleTalk, Phase 2
Phase IV Prime, configuration (example) P3C-54
PHB (Per-Hop Behavior)
assured forwarding QC-377
class-selector QC-377
default QC-377
definition QC-376
expedited forwarding QC-378
See also DiffServ
physical interfaces
GGSN, configuring on MWC-25
See GGSN physical interfaces
physical-layer command DC-150, IC-148
physical unit concentrator
See DSPU
PIAFS (Personal-Handyphone-System Internet Access Forum Standard)
configuring DC-324
description DC-323
PIAFS Wireless Data Protocol for MICA Modems feature DC-323
PIM (Protocol Independent Multicast)
See IP multicast routing, PIM
PIM (Protocol Independent Multicast), enabling XC-282
ping command FC-244, IC-172, IPC-440
AppleTalk P2C-55
connectivity, testing FC-288
DECnet
privileged P3C-53
user P3C-53
IP
privileged IPC-48
user IPC-48
IPX P2C-155
ISO CLNS, privileged P3C-96
VINES P3C-26
XNS P3C-132
ping reply, specifying how long to wait IPC-71
ping sna command BC-551
ping timeout, specifying duration IPC-71
pipe
use in show and more commands FC-33
plain text authentication
See authentication, neighbor router
platforms in MGCP VC-179
playout-delay command VC-95
playout-delay mode command VC-94
PLIM (physical layer interface module)
description, on the AIP WC-7
SONET, configuring WC-50
POD (packet of disconnect)
See AAA, POD
point-to-multipoint signalling
for ATM, configuring WC-33
point-to-point
connection maps XC-98
overlay XC-98
WRED XC-221
configuration (example) XC-221
polarity, receive circuitry, reversing automatically IC-58
policing
CAR QC-204
defined QC-203
token bucket QC-204
used with shaping, summary QC-13
policing mechanisms
CAR VC-170
policy map, configuring XC-172
policy-map class configuration mode
summary FC-407
bandwidth, configuring for service policies QC-125, QC-133, QC-361
class-based shaping, configuring QC-229
classes, deleting QC-124
DSCP value, configuring QC-64
DTS QC-238
flow-based WFQ QC-364
GTS QC-230
NBAR QC-73
queue limit, setting QC-126
traffic policies, configuring QC-75
policy-map configuration mode
summary FC-407
policy maps
class, attaching QC-230
class-based shaping, configuring QC-229
configuration (example) QC-144, QC-145
configuring
bandwidth QC-125
queue limit QC-126
deleting QC-124
flow-based WFQ QC-364
GTS QC-230
information, displaying QC-124, QC-139
LLQ priority queue, configuring QC-137
service policies, configuring QC-119
verifying QC-230
Policy Propagation via BGP
access lists, using QC-50
autonomous system paths, using QC-49
community lists, using QC-48
configuration (examples) QC-51
configuring QC-47
monitoring QC-50
overview QC-25
packet classification, methods QC-25
policy route-map
MLS
restrictions XC-269
policy routing IPC-367, IPC-370, VC-167
fast switched IPC-371
poll-group configuration mode
See system controller poll-group configuration mode
polling
frequency BC-396
interval BC-396
secondary station BC-402
transmit-poll-frame timer BC-396
poll timers, configuring WC-38
pool-member command DC-536
pool-range command VC-704
Poor Man's Routing, on DECnet P3C-39
POP (point of presence)
large-scale dial
configuration (examples) DC-844
scaling DC-839
stacking overview DC-840
remote DC-581
small-to-medium-scale dial
configuration (examples) DC-829
Port Aggregation Protocol IC-50
port assignments XC-178
port-channel
See Fast EtherChannel
port-channel interface caution IC-49
port command BC-38, BC-54, VC-242, VC-247, VC-254, VC-269, VC-378, VC-493, VC-548, VC-880
port concentrator, Frame Relay WC-179
port media command VC-749
port modem autotest command DC-129
port queue
retry interval
setting FC-88
ports
master control XC-142
UPC, configuring DC-127
port signal command VC-746, VC-748
POS (packet-over-SONET)
configuring IC-131
scrambling IC-128
pos ais-shut command IC-128, IC-134
pos report command IC-133
pos scramble-atm command IC-128
pos threshold command IC-133
pots call-waiting command VC-866
pots country command VC-51
POTS Dial
and Enhanced Voice Services for Japan VC-861
pots dialing-method command VC-51
POTS Disconnect
and Enhanced Voice Services for Japan VC-861
pots disconnect-supervision command VC-52
pots disconnect-time command VC-53
pots distinctive-ring-guard-time command VC-53
pots encoding command VC-52
pots line-type command VC-51
pots ringing-freq command VC-52
pots silence-time command VC-53
pots tone-source command VC-52
PPP
AppleTalk over, configuring DC-580, DC-602
AppleTalk Remote Access, configuring TC-66
AppleTalk zones (example) DC-46
asynchronous access, ISDN lines DC-203
automatic sessions, starting DC-155
banner tokens FC-99
callback DC-651
(example) DC-652
authentication DC-649
client, configuring DC-650
client-server application DC-649
outgoing lines DC-643
server, configuring DC-651
support required DC-649
CHAP and PAP, authentication order DC-598
compression IC-89
Cisco 2600 series, verifying IC-91
compressions
hardware-dependent DC-600
lossless data DC-600
Microsoft DC-601
platform support DC-601
software DC-600
connections DC-582
enable encapsulation SC-50
encapsulations
enabling DC-598
interfaces, configuring DC-371, DC-402
legacy DDR DC-399
half-bridging
(figure) DC-609
configuring DC-608
inbound authentication SC-51
IP
address negotiation DC-603
address pooling DC-603
configuring over DC-578
IPX
asynchronous interfaces DC-579
configuring DC-578
dedicated network numbers (example) DC-47
header compression DC-585
loopback interfaces (example) DC-47
IPX over vty lines TC-140
IPX-PPP
vty lines, configuring DC-48
LAT translations TC-170
Magic Number support DC-632
MPPC
compression scheme DC-601
protocol field compression flag DC-603
MS Callback
LCP callback option DC-652
Microsoft Callback Control Protocol (MSCB) DC-651
network-layer protocols, configuring DC-578
outbound authentication SC-51
peer neighbor routes
dialer interface effect DC-608
disabling DC-608
group-async interface effect DC-608
PPP-IP
asynchronous interfaces, configuring DC-47
reliable link DC-607
SLIP banner DC-587
(example) DC-589
tokens DC-587
SLIP BOOTP requests DC-576
telecommuting configuration (example) DC-576, DC-596
virtual terminal lines DC-575, DC-595
with LAN Extender IC-62
X.25 tunneling (example) TC-170
PPP, IPX P2C-121
ppp authentication chap command DC-371, DC-399, DC-402, DC-431, DC-486, DC-613, DC-635, DC-650, WC-121
ppp authentication command DC-598
ppp authentication pap command DC-399, DC-612, DC-650
ppp bap call accept command DC-245
ppp bap callback accept command DC-243, DC-667
ppp bap callback request command DC-245
ppp bap call request command DC-244, DC-667
ppp bap call timer command DC-668
ppp bap drop after-retries command DC-668
ppp bap link types analog command DC-667, DC-668
ppp bap link types isdn analog command DC-668
ppp bap max dial-attempts command DC-667, DC-668
ppp bap max dialers command DC-667, DC-668
ppp bap max ind-retries command DC-667, DC-668
ppp bap max req-retries command DC-667, DC-668
ppp bap monitor load command DC-667
ppp bap number command DC-248
ppp bap number default command DC-667, DC-668
ppp bap number prefix command DC-247
ppp bap number secondary command DC-667, DC-668
ppp bap timeout response command DC-667, DC-668
ppp bridge appletalk command DC-609
ppp bridge ip command DC-609
ppp bridge ipx command DC-609
ppp callback accept command DC-651
ppp callback initiate command DC-643
ppp callback request command DC-650
ppp command DC-582
PPP extended NAS-Port format
See RADIUS, NAS-Port format for PPP
ppp multilink bap command DC-242, DC-243, DC-244, DC-666
ppp multilink bap required command DC-666, DC-679
ppp multilink command DC-610, DC-611, DC-612, DC-619, DC-635
ppp multilink endpoint command DC-615
ppp multilink fragment delay command DC-616
ppp multilink fragment-delay command QC-323
ppp multilink fragment disable command DC-620
ppp multilink group command DC-619
ppp multilink idle-link command DC-242, DC-246, DC-248
ppp multilink interleave command QC-323
PPPoE (PPP over Ethernet)
over 802.1Q VLANs
(example) WC-152
enabling WC-136
maximum number of sessions, setting WC-136
overview WC-135
RADIUS NAS-Port format (example) WC-153
RADIUS NAS-Port format, configuring WC-138
restrictions WC-135
VPDN group, configuring WC-136
over ATM
(example) WC-151
Discovery Stage protocol WC-130
network topology (figure) WC-130
overview WC-129
PVCs, configuring WC-132
RADIUS NAS-Port format (example) WC-153
RADIUS NAS-Port format, configuring WC-138
restrictions WC-131
VPDN group, configuring WC-132
over Ethernet
(example) WC-152
description WC-133
VPDN group, configuring WC-134
pppoe limit per-mac command WC-134
pppoe limit per-vlan command WC-136
pppoe max-session command WC-136
PPPOE SESSION_ID WC-131
PPP over ATM
Cisco proprietary (example) WC-150
description WC-119
IETF-compliant LLC encapsulated (example) WC-149
IETF-compliant MUX encapsulated (example) WC-145
SVCs
(example) WC-151
configuring WC-128
verifying WC-129
virtual templates WC-121
PPP over Frame Relay
DCE configuration (example) WC-227
description WC-186
DTE configuration (example) WC-226
frame format WC-186
PVC mapping, defining WC-187
restrictions WC-186
ppp quality command DC-600
ppp reliable-link command DC-608
ppp use-tacacs command DC-399, DC-599
pptp flow-control receive-window command DC-534
pptp flow-control static-rtt command DC-534
pptp tunnel echo command DC-534
behavior QC-110
configuration (example) QC-167
configuring QC-165
default, assigning QC-166
filters QC-110
group QC-167
how it works (figure) QC-110
lower-priority traffic, effect on QC-111
maximum number of packets QC-160, QC-166
overhead QC-111
overview QC-110
packet classification QC-111
restrictions QC-111
strict
See IP RTP Priority; LLQ
traffic prioritization QC-110
uses QC-111
prc-interval command IPC-284
preauthentication, configuring SC-137
Preauthentication with ISDN PRI and Channel-Associated Signaling feature DC-728
Preauthentication with ISDN PRI feature DC-272
precedence (VC bundle) command QC-360
precedence (WRED group) command QC-356
precedence, rate-limiting traffic VC-170
precedence assignments XC-223
precedence bits, function XC-114, XC-116
predictor command IPC-141
predictor compression WC-261
preference command VC-130, VC-134, VC-145, VC-400, VC-433, VC-435
preferential CUGs WC-305, WC-306
preferred-nnserver command BC-809
preferred routes, specifying with ISO IGRP P3C-90
prefix command VC-152, VC-548, VC-696
prefixes VC-151
prefix list
adding and removing entries (example) IPC-331
creating IPC-297
deleting IPC-299
disabling automatic sequence generation IPC-298
entries, configuring IPC-298
filtering with IPC-297
removing an entry IPC-299
route filtering IPC-296
sequence numbers IPC-298
sequence values IPC-298
show entries IPC-299
prefix list entries, clearing hit table count IPC-300
prerequisite tasks list VC-506
preshared keys MWC-42
See keys, preshared; keys, preshared using AAA server
preventing new calls, in MGCP VC-189
PRI⁄ISDN signaling, MGCP support of VC-182
pri-group command DC-264, DC-266
pri-group timeslots command VC-598, VC-601
pri-group timeslots nfas d command DC-321
primary IP addresses, setting IPC-8
primary stations
routing device, enabling BC-398
printer
configuring for LPD protocol FC-89
printer command FC-89
printer connections
See connections, printers
priority command
bandwidth, configuring QC-133, QC-140
priority-group command BC-347, QC-167
priority groups (example) BC-357
priority-list default command QC-166
priority-list interface command QC-166
priority-list protocol bstun command BC-368
priority-list protocol command BC-264, IC-67, P2C-20, QC-166
priority-list protocol ip tcp command BC-368
priority-list queue-limit command QC-166
priority lists, description QC-111
priority-list stun address command BC-348
priority queue QC-246
priority queueing, enabling BC-344
priority queueing, X.25 WC-302
private
connections XC-98
intranet XC-98
IP addresses XC-99
private command FC-75
privileged EXEC mode
accessing FC-12
description FC-12
prompt FC-12
summary FC-17
privilege level command TC-12
privileges
changing default SC-407
configuring SC-406
displaying current level SC-407
logging in SC-407
probes
See SA Agent, operations
process switching
description XC-8
profile configuration subsubmode
summary FC-416
profiles
configuring BC-791
dialer DC-656
large-scale dial-out user DC-681
RPM
backup customer DC-720, DC-743
call discriminator DC-724, DC-727
customer DC-719
default customer DC-720
template DC-720
prompt command FC-260
prompts
customizing FC-260
X.28 router TC-100
protect command QC-360
protect interface, APS IC-132
protocol (ATM) command QC-358
protocol addresses, configuring for ATM WC-20
protocol command VC-742, WC-20, WC-133
protocol data unit (PDU)
See ERPDU
Protocol Discovery, NBAR QC-34
protocol pppoe command WC-132
protocols
carrier, tunneling IC-174
passenger, tunneling IC-174
queueing priority, assigning QC-161
supported by NBAR QC-36
transport, tunneling IC-174
protocols, Combinet Proprietary Protocol DC-268, DC-325
protocols, configuring
preferred conection TC-9
preferred transport TC-11
terminal transport TC-9
protocols, exterior IP gateway IPC-3
protocol support, CBAC (table) SC-226
protocol translation ruleset scripts
regular expression pattern matching in TC-206
protocol translations
application configuration (examples) TC-151to TC-160
basic configuration (example) TC-152
central site (example) TC-154
LAT to LAT
Frame Relay or SMDS (example) TC-158
IP WAN (example) TC-156
via X.25 (example) TC-161
LAT to PPP (example) TC-170
LAT to TCP local translation (example) TC-167
LAT to TCP over a WAN (example) TC-162
LAT to TCP via X.25 (example) TC-163
LAT to X.25 host (example) TC-165
one-step method
configuring TC-122
overview TC-122
TCP-to-X.25 host connections (example) TC-178
overview TC-6
PAD call, accepting TC-135
parameters, changing dynamically (example) TC-179, TC-180
PPP over X.25 tunneling (example) TC-170
sessions, supported TC-129, TC-138, TC-139
TCP to SLIP translations TC-170
tunneling PPP over X.25 (example) TC-171
two-step method TC-128
for TCP to PAD connections (example) TC-178
general purpose gateway TC-128
overview TC-123
virtual asynchronous interfaces, tunneling protocols TC-123
virtual interface templates
benefits TC-125
virtual templates
two-step, configuring TC-125
virtual terminal lines TC-138
X.25 PAD to LAT (example) TC-174
X.25 PAD to TCP (example) TC-176
X.25 to PPP tunneling (example) TC-170
protocol type, filtering BC-46
provide SC-201
proxy
access control VC-298
application-specific routing
(example) VC-352, VC-356, VC-359
description VC-302
co-edge mode VC-299
co-edge with subnetting
configuring (example) VC-354
configuring VC-332
configuring (example) VC-352, VC-356, VC-357, VC-359
H.323 multimedia backbone, configuring (example) VC-350
inter-zone call VC-204
network address translation VC-300
outbound calls
configuring (example) VC-361
prohibiting for inbound calls
configuration (example) VC-363
QoS, configuring VC-357
removing (example) VC-362
security VC-297
single-proxy configurations VC-215
with application-specific routing (ASR)
configuring VC-337
without application-specific routing (ASR)
configuring VC-333
proxy and T.120
configuring VC-759
proxy ARP
definition IPC-28
disabling IPC-14
proxy explorer configuration BC-119
proxy h323 command VC-333, VC-337, VC-342, VC-759
proxy network numbers
(example) P2C-75
interoperability P2C-41
proxy server VC-368
pseudobroadcasting WC-3
SMDS, configuring for WC-252
(example) WC-257
pseudonode, NLSP P2C-98
PSTN (Public Switched Telephone Network)
fallback monitors VC-536
switches, disconnecting VC-83
PU
configuration mode
See TN3270 configuration modes
pu (DLUR) command BC-819
pu (listen-point) command BC-819
pu (TN3270) command BC-819
public
IP addresses XC-99
IP network XC-99
public key configuration mode
summary FC-406
public key configuration mode, enabling SC-372, SC-388
public key hex input configuration mode
description FC-406
pu dlur command BC-813, BC-814, BC-819
pulse-time command IC-100
PUs (physical units)
description BC-770
direct BC-770
configuration BC-819
DLUR BC-771
DSPU configuration BC-230, BC-511
lu-seed argument BC-771
SDLLC configuration BC-445
type 2 device, defining BC-230, BC-511
PVC (permanent virtual circuits)
Cisco 6400 UAC, configuring XC-138
in non-MPLS-enabled core, configuring XC-174
mode XC-174
on point-to-point subinterface XC-224
pvc-bundle command QC-359
pvc command VC-728, VC-740, WC-20
PVC-in-range
See ATM, PVC range
pvc-in-range command WC-144
PVCs (permanent virtual circuits)
ATM
broadcast packets, configuring WC-25
configuring (example) WC-98, WC-99
PPPoE over ATM WC-132
PVC discovery (example) WC-100
traffic parameters, configuring WC-21
VC classes, configuring WC-25
discovery
(example) WC-100
ATM, configuring WC-22
Inverse ARP, configuring WC-23
statistics, displaying WC-207
Status Tables WC-26
traffic, configuring WC-292
trap support
(example) WC-101
configuring WC-24
X.25
establishing (example) WC-326
locally switched, configuring WC-291
remote tunneling (example) WC-326
switching on same router (example) WC-323
PVP (permanent virtual paths)
Cisco 6400 UAC, configuring XC-139
LVC, configuring XC-179
value, determining the XC-140
pwd command FC-138
Q
Q.2931 protocol WC-29
QLLC (Qualified Logical Link Control) conversion
customizing BC-429
enabling BC-427
implementation considerations BC-223, BC-393, BC-419
monitoring BC-431
SNA over X.25 BC-416
topology BC-221, BC-391, BC-417
qllc accept-all-calls command BC-428
qllc dlsw command BC-295
qllc npsi-poll command BC-428
qllc partner command BC-429
qllc sap command BC-430
qllc srb command BC-427, BC-428
qllc xid command BC-429
QoS (quality of service) XC-98
ATM interface supported features XC-168
ATM switch supported features XC-169
committed access rate XC-167
configuring XC-169
defined QC-1
definition XC-113
description XC-113
end-to-end QC-1
congestion avoidance QC-11
congestion management QC-8, QC-79
link efficiency mechanisms QC-15
policing and shaping QC-13
signalling QC-14
for VPNs
benefits QC-29
configuration (examples) QC-71
configuring QC-69
description QC-8
restrictions QC-30
verifying QC-70
function XC-114
group value
configuration (examples) QC-68
configuring QC-65
H.323
traffic VC-290
H.323 proxy
configuring VC-357
mapped functions XC-114
maps XC-175
operation, verifying XC-176
policy-map class configuration mode, summary FC-407
policy-map configuration mode, summary FC-407
queueing VC-166
sample network topology XC-219
SDM (Security Device Manager) QC-415
service models QC-3
support XC-231
support on MPLS backbone XC-167
VBR options for traffic shaping VC-422
weighted fair queueing XC-167
Weighted Random Early Detection XC-167
weighting techniques VC-167
IP Precedence VC-167
policy routing VC-167
RSVP VC-167
WFQ
IP RTP Priority VC-169
QoS (quality of service), preserving over VPNs DC-539
QoS, ISO CLNS use of P3C-92
QoS autosense
See Frame Relay, ELMI
qos pre-classify command QC-70
QSIG Network Transparency
Voice over IP
Cisco AS5300 VC-630
QSIG PRI signaling VC-630
QSIG PRI voice signaling support
Cisco AS5300 VC-629
query mode, enabling SC-366
query url command SC-367
question command FC-19
queueing VC-166
comparison QC-81
comparison (table) QC-82
effect of X.25 flow control of WC-302
fancy, ISDN traffic shaping DC-430
methods, default QC-86
per-VC QC-352
strict priority QC-10, QC-93, QC-97
weighting techniques
RSVP VC-167
WFQ
IP RTP Priority VC-169
X.25 WC-302
See also CQ; FIFO; PQ; WFQ
queueing priority, STUN
all traffic BC-348
LU address BC-347
serial interface address BC-346
queue-limit command
class policies, configuring QC-136
DWRED QC-188
flow-based WFQ QC-364
queue limit, modifying QC-126
traffic classes QC-404
queue-list default command QC-161
queue-list interface command QC-161
queue-list protocol bstun command BC-368
queue-list protocol command QC-161
queue-list protocol ip tcp command BC-368
queue-list queue byte-count command QC-160
queue-list queue limit command QC-160
queues, dialer hold DC-375, DC-405
queues, strict priority, reserving QC-132
queue sizes, exponential weight factor QC-188, QC-189
queue weight, changing XC-175
queuing
weighting techniques
RSVP VC-167
quit command FC-96
quitting sessions FC-76, FC-96
R
R1 modified signaling, configuring DC-294
R2 signaling DC-289
system requirements DC-279
RADIUS
accounting SC-127
attributes 461
IETF 468
large-scale dial-out, (table) DC-684
server AV pair DC-700
vendor-proprietary SC-124, SC-129, SC-130
vendor-specific SC-124
attribute-value pairs SC-123
authentication SC-127
authorization SC-127
authorization of SC-74
configuration (examples) SC-130to SC-139
configuration tasks SC-111
configuring
attributes, vendor-proprietary SC-115
attributes, vendor-specific SC-114
communication, global SC-113
communication, per-server SC-113
DNIS preauthentication SC-122
DNIS server group selection SC-119
guard timer SC-127
NAS port types, displaying SC-116
password, username SC-129
preauthentication profiles SC-122
queries for IP addresses SC-116
queries for static routes SC-116
RADIUS prompt SC-128
server communication SC-112
server groups SC-117
server groups, deadtime for SC-119
server groups, DNIS selection of SC-119
suffix, username SC-129
UDP ports SC-112
username SC-129
login authentication SC-28, SC-31, SC-35, SC-38
Login-IP-Host SC-128
NAS-Port format for PPP
LAC, configuring WC-139
LNS (example) WC-154
LNS, configuring WC-139
overview WC-137
PPP extended NAS-Port format WC-137
PPPoE over 802.1Q VLAN, (example) WC-153
PPPoE over ATM, example WC-153
PPPoE over ATM, NAS-Port format WC-137
PPP over ATM, NAS-Port format WC-137
operation SC-110
overview SC-109
preauthentication profiles
callback SC-123
call type SC-123
CLID SC-122
DNIS SC-122
modem management SC-124
subsequent authentication SC-124
two-way authentication SC-126
username SC-125
server groups
deadtime SC-118
description SC-117
DNIS selection of SC-119
servers DC-696
user accounting
configuring VC-320
RADIUS (Remote Access Dial-In User Service)
GGSN
configuration (example) MWC-58
configuring globally MWC-37
MSISDN, overriding in request MWC-40
MSISDN IE, including in request MWC-40
non-transparent access mode, configuring MWC-38
RADIUS/AAA server
configuring VC-318
RADIUS/TACACS+
H.323 login authentication VC-314
multimedia conference calls VC-293
RADIUS accounting attributes
overloaded acct-session ID field VC-257
RADIUS attribute/value (AV) pairs VC-256
radius-server attribute 44 include-in-access-req command SC-31
radius-server attribute 8 include-in-access-req command SC-28
radius-server command MWC-29, MWC-39
radius-server deadtime command VC-318
radius-server host command DC-698, MWC-37, VC-262, VC-315, VC-319, VC-493
radius-server key command DC-679, DC-698, MWC-37, VC-262, VC-317, VC-319, VC-493
RA mode, enabling SC-367
RAND compressor WC-261
random-detect (interface) command QC-136, QC-191, QC-364
random-detect (per VC) command QC-296
random-detect command QC-404
random-detect dscp command QC-191
random-detect exponential-weighting-constant command
class policies QC-122
random-detect flow command QC-190
random-detect flow count command QC-190
random-detect-group command QC-191, QC-356
random-detect precedence command
class-based DCAR policies, configuring QC-59
DWRED QC-189
range pvc command WC-143
RARP (Reverse Address Resolution Protocol) definition IPC-13
RARP server
configuring a router as FC-247
(example) FC-248
RAs (registration authorities)
See CAs
RAS (registration, admission, and status protocol)
BIND text record (example) VC-307
configuring VC-307
gateway communication VC-5, VC-205
message fields VC-220
ACF VC-223
ARQ VC-221
DRQ VC-224
GCF VC-221
GRQ VC-220
RRQ VC-221
ras command VC-307
RAS configuration
verifying VC-255
RAS configuration (example) VC-280
RAS dial-peer configuration
troubleshooting VC-255
rate limit XC-221
rate-limit-access list, configuring XC-173
rate-limit command QC-56, QC-57, QC-58
rate-limiting mechanism
CAR VC-170
rate-limiting tools VC-169
rate limits, CAR QC-204, QC-206
rate queues
dynamic (example) WC-106
raw queue sizes
AIP WC-52
ATM WC-52
RBE (routed bridge encapsulation)
See ATM, routed bridge encapsulation
RCAPI (Remote Common Application Programming Interface)
B-channel protocols supported DC-253
configuration (examples) DC-256
configuring DC-255
maintaining DC-256
overview DC-251
rcapi number command DC-255
rcapi server port command DC-255
rcp (remote copy protocol)
authentication database
adding entries (example) FC-253
creating for remote users FC-253
Cisco's implementation FC-249
Cisco versus UNIX command syntax FC-253
remote username
configuring FC-254
requests
sending FC-254
supporting FC-253
server
booting from (example) FC-200
configuration files, copying FC-153, FC-158
system images, copying FC-181, FC-190
using FC-253
RDPDU (redirect protocol data unit)
interval to disable P3C-95
ISO CLNS, configuring for sending P3C-95
real-time traffic QC-245
Real-Time Transport Protocol
See RTP header compression
Real-time Transport Protocol
See RTP
reassign command IPC-142
rebooting
See booting
receive only mode
hoot and holler
configuring VC-843
receivers command IPC-516
reconfiguring the routing table (BGP) IPC-291, IPC-292
recovering clocking
from network device attached to serial 0
configuring VC-803
from network device attached to T1/E1 controller VC-796
recursive route problem IC-177
RED (Random Early Detection) VC-171
background QC-172
how it works QC-172
packet drop probability QC-173
TCP
congestion control mechanism QC-172
traffic loss strategy QC-174
RED group configuration mode, summary FC-407
redial
legacy DDR hubs, configuring DC-406
legacy DDR spokes, configuring DC-376
redirecting number information
tunneling VC-215
redirect number information tunnel, description VC-215
redirect-reason command VC-328
redirect server VC-368
redistribute command IPC-363, P2C-89, P2C-115
ISO CLNS P3C-88
route aggregation P2C-106, P2C-107, P2C-109, P2C-113, P2C-114
redistribute dvmrp command IPC-349
redistribute static command DC-382, DC-416, P3C-88
redistribution
AppleTalk Enhanced IGRP P2C-47
IGRP
(example) IPC-376
routes, disabling default information between processes IPC-363
routes, using same metric value for all routes IPC-363
IPX Enhanced IGRP P2C-89
IS-IS IPC-361
match criteria, address P3C-89
RIP and IGRP protocol (example) IPC-376
RIP and IP (example) IPC-376
route maps, using IPC-361, P3C-88
routes P3C-87
routing information IPC-361
static routing (example) IPC-376
See also route redistribution
redundancy
between multiple routers XC-328
HSRP XC-328
in VLANs XC-321
LANE XC-365
Redundant Dial Shelf Controller feature DC-108
redundant gatekeepers
configuring for a technology prefix VC-311
redundant H.323 zones VC-291
redundant H.323 zone support
configuring VC-308
restrictions VC-302
benefits SC-202
how it works SC-203
restrictions SC-204
session filtering
basic access lists SC-202
reflexive access lists SC-202
topology
DMZ (figure) SC-205
simple (figure) SC-205
where to configure SC-203
refuse-message command FC-98, TC-17
register command VC-215
registered-caller ring command VC-865, VC-867
registrar server VC-368
regular expressions
(examples) TC-204
(table) TC-200
(table) DC-865
$ character DC-862
* character DC-862, DC-864, DC-865
^ character DC-862
_ character DC-862
removing meaning of DC-864
creating DC-862
description DC-861
examples DC-867
multiple character TC-202
(table) DC-864
parentheses for recall DC-866, TC-204
single character TC-201
use in filtering CLI output FC-29
X.121 addresses, using in TC-136
rejected frames, LLC2, resending BC-395
reload cancel command FC-236
reload command FC-16, FC-231, FC-235, FC-236
boot from Flash FC-198
reload components command DC-107
reloads
scheduled FC-234
(example) FC-235
canceling FC-236
canceling (example) FC-236
information, displaying FC-235
relocatable images
run-from-Flash systems FC-213
REM (Ring Error Monitor)
LNM function BC-103
reporting interval, changing BC-107
remote command execution
Remote Common Application Programming Interface for Cisco 800 Series Routers feature DC-251
remote copying
See rcp
remote Ethernet LAN IC-61
remote-ext-address command VC-329
remote failure detection, X.25 WC-315
remote loopback, remote DDS CSU/DSU DC-298
remote node services TC-3
remote office routers, configuring DC-788, DC-791
remote offices
enterprise dial DC-780
service provider dial DC-780
remote PCs
large-scale dial DC-780
PPP over X.25 DC-780
small-scale dial DC-780
VPDN dial DC-780
remote peer on SMDS (example) WC-254
remote peers, enabling LLC2 local acknowledgment with BC-203, BC-253
remote username
configuring FC-254
defaults FC-254
REMOTTO definition, SDLLC configuration BC-445
reply-PSID request, LU deletion BC-779
report path trace function, disabling BC-105
repudiation SC-380
request-data-size command FC-345
request dialin command DC-534
request-dialin group configuration mode FC-418
request-dialout command DC-536
request-dialout group configuration mode FC-418
reservation
See also RSVP
reservation, configuring QC-277
reset
configured inbound soft, BGP IPC-292
dynamic inbound soft, BGP IPC-291
dynamic outbound soft, BGP IPC-292
residential gateway See RGW
resolution reply
MPOA XC-440
NHRP XC-440
resolution request
MPOA XC-440
NHRP XC-440
resource command DC-743
resource group configuration mode
resource-pool aaa protocol command DC-738
resource-pool aaa protocol group local command DC-743
resource-pool call treatment profile command DC-738
resource-pool call treatment resource command DC-738
resource-pool enable command DC-738
resource pool management FC-408
resource-pool profile customer command DC-743, DC-746, DC-750
resource-pool profile vpdn command DC-750
Resource Reservation Protocol (RSVP)
RSVP-ATM quality of service (QoS)
configuring VC-764
resources
sharing between VLANs XC-321
responder support, AppleTalk P2C-56
response-data-size command FC-345
response-time group command BC-824
response time reporter
See SA Agent
response times, TN3270 server
buckets BC-781
client group types (table) BC-780
configuration verification BC-825
monitoring BC-826
sliding-window BC-781
SNMP BC-780
RESPORT parameter BC-584, BC-606
restarting call operation, in MGCP VC-189
resume/next command FC-107
use in menus FC-107
resume connection command FC-107
menu command FC-107
retransmission interval, setting, IS-IS IPC-277
retransmission interval, setting LSP P3C-77
Return key FC-21
modem chat script, adding code for DC-165
reverse Telnet
See Telnet, direct sessions
RFC
obtaining full text FC-310
RFC 724, NAME/FINGER Protocol QC-31
RFC 759, Internet Message Protocol QC-31
RFC 791
Internet Protocol IPC-82
subnetting IPC-9
RFC 792
Internet Control Message Protocol (ICMP) IPC-79
RFC 792, Internet Control Message Protocol QC-31
RFC 793, Transmission Control Protocol QC-31
RFC 821, Simple Mail Transfer Protocol QC-31
RFC 826
ARP IPC-13
RFC 827, Exterior Gateway Protocol QC-31
RFC 854, Telnet Protocol Specification QC-31
RFC 862, Echo TCP and UDP service IPC-1
RFC 863, Discard TCP and UDP service IPC-1
RFC 877, IP encapsulation WC-280
RFC 888, STUB Exterior Gateway Protocol QC-31
RFC 896
Nagle's algorithm FC-279
RFC 903
RARP IPC-13
RFC 904, Exterior Gateway Protocol formal specification QC-31
RFC 919
Broadcasting Internet Datagrams IPC-31
RFC 922
Broadcasting IP Datagrams in the Presence of Subnets IPC-31
RFC 951, Bootstrap Protocol QC-31
RFC 959, File Transfer Protocol QC-31
RFC 977, Network News Transfer Protocol QC-31
RFC 877, IP encapsulation WC-276
RFC 1001, Protocol Standard for a NetBIOS Service on a TCP/UDP Transport (Concepts and Methods) QC-31
RFC 1002, Protocol Standard for a NetBIOS Service on a TCP/UPD Transport (Detailed Specification) QC-31
RFC 1027
RFC 1042, Standard for the Transmission of IP Datagrams Over IEEE 802 Networks IC-34, IC-72
RFC 1055, SLIP DC-575
RFC 1057, Remote Procedure Call QC-31
RFC 1058, RIP IPC-199
RFC 1080, Remote Flow Control TC-18
RFC 1084
extended BOOTP requests FC-249
RFC 1094, Network File System Protocol Specification QC-31
RFC 1108, IP Security Options SC-423
RFC 1112
Host Extensions for IP Multicasting. IPC-395
RFC 1112, Host Extension for IP multicasting QC-31
RFC 1144
Compressing TCP/IP Headers for Low-Speed Serial Links IPC-428
TCP/IP header compression IPC-425
RFC 1144, Compressing TCP/IP Headers for Low-Speed Serial Links QC-319
RFC 1144, TCP/IP header compression DC-160, DC-583, WC-283
RFC 1144, TCP header compressions QC-318
RFC 1157
SNMPv1 FC-311
RFC 1157, Simple Network Management Protocol QC-31
RFC 1163, Border Gateway Protocol (BGP) Version 2 IPC-285
RFC 1166
Internet Numbers IPC-8
RFC 1191
Path MTU Discovery IPC-81, IPC-111
RFC 1195
Use of OSI IS-IS IPC-11
RFC 1209, multiple logical IP subnetworks WC-250
RFC 1213
MIB II variables FC-311
RFC 1215
SNMP traps FC-311
RFC 1219, Variable-Length Subnet Masks (VLSM) IPC-358
RFC 1231, IEEE 802.5 Token Ring MIB BC-15, BC-84, IC-71
RFC 1243 P2C-3
RFC 1253, OSPF MIB IPC-223
RFC 1256
Router Discovery Protocol IPC-29
RFC 1267, Border Gateway Protocol (BGP) Version 3 IPC-285
RFC 1282, BSD Rlogin QC-31
RFC 1288, The Finger User Information Protocol QC-31
RFC 1294/1490 WC-215
RFC 1305
NTP FC-269
RFC 1305, Network Time Protocol QC-31
RFC 1323
TCP timestamp IPC-113
RFC 1323, window scaling SC-214
RFC 1331, PPP DC-575
RFC 1332, IPCP DC-575
RFC 1334, CHAP and PAP protocols DC-597, DC-634
RFC 1334, PPP Authentication Protocols SC-49
RFC 1348
DNS NSAP RRs IPC-17
RFC 1348, Domain Name System P3C-86
RFC 1350, The TFTP Protocol (Revision 2) QC-31
RFC 1356, IETF standard encapsulation WC-266, WC-279, WC-283
RFC 1403, BGP/OSPF interaction IPC-326
RFC 1406, Definitions of Managed Objects for DS1 and E1 Interface Types IC-103, IC-104
RFC 1407, DS3 MIB Variables IC-103, IC-104, IC-119, IC-120, IC-122
RFC 1413, Identification Protocol SC-413
RFC 1436, The Internet Gopher Protocol QC-31
RFC 1459, Internet Relay Chat Protocol QC-31
RFC 1469
IP Multicast over Token-Ring Local Area Networks IPC-410
RFC 1483, bridge frame formats WC-55
RFC 1483, multiprotocol encapsulation WC-4, WC-93
RFC 1483, Multiprotocol Encapsulation over ATM Adaptation Layer 5 BC-10, BC-15, BC-33
RFC 1490
BAN support BC-447
BNN support BC-447
description BC-449
multiprotocol encapsulation BC-448
Multiprotocol Interconnect over Frame Relay BC-10, BC-223, BC-225
RFC 1490, multiprotocol encapsulation WC-94
RFC 1510, The Kerberos Network Authentication Service QC-31
RFC 1516, Definitions of Managed Objects for IEEE 802.3 Repeater Devices IC-57
RFC 1531
Dynamic Host Configuration Protocol (DHCP) IPC-32
RFC 1542, Clarifications and Extensions for the Bootstrap Protocol QC-32
RFC 1553, IPX header compression over WAN media P2C-121
RFC 1567, NSSA (not so stubby areas) IPC-224
RFC 1570, PPP callback DC-649
RFC 1576, TN3270 Current Practices BC-249, BC-769
RFC 1577, classical IP and ARP over ATM WC-9
RFC 1577, IP and ARP over ATM WC-45
RFC 1579, Firewall-Friendly FTP QC-32
RFC 1583, OSPF Version 2 IPC-223, QC-32
RFC 1619, PPP over SONET/SDH IC-125
RFC 1631
The IP Network Address Translator (NAT) IPC-35
RFC 1634 P2C-121
RFC 1657, Definitions of Managed Objects for the Fourth Version of the Border Gateway Protocol QC-32
RFC 1661, PPP encapsulation DC-595
RFC 1662, PPP in HDLC-like Framing IC-125
RFC 1663, PPP Reliable Transmission DC-607
RFC 1695, managed objects for ATM WC-10
RFC 1701, Generic Routing Encapsulation QC-32
RFC 1730, Internet Message Access Protocol - Version 4 QC-32
RFC 1757
RMON FC-1
RFC 1771, A Border Gateway Protocol 4 (BGP-4) QC-32
RFC 1771, Border Gateway Protocol Version 4 IPC-285, IPC-295
RFC 1777, Lightweight Directory Access Protocol QC-32
RFC 1793, OSPF over demand circuit IPC-224
RFC 1795, DLSw standard BC-205, BC-282
RFC 1829, The ESP DES-CBC Transform SC-335
RFC 1831, Remote Procedure Call Protocol Specification Version 2 QC-32
RFC 1889 WC-205
RFC 1889, RTP QC-316
RFC 1889, RTP: A Transport Protocol for Real-Time Applications IC-90, IPC-424
RFC 1901
SNMPv2C FC-311
RFC 1928, SOCKS Protocol Version 5 QC-32
RFC 1939, Post Office Protocol - Version 3 QC-32
RFC 1945, Hypertext Transfer Protocol -- HTTP/1.0 QC-32
RFC 1964, The Kerberos Version 5 GSS-API Mechanism QC-32
RFC 1989, PPP link quality monitoring DC-599
RFC 1990, The PPP Multilink Protocol (MP) QC-316
RFC 1994, CHAP protocol DC-597, DC-634
RFC 1994, PPP CHAP SC-53
RFC 2018
TCP selective acknowledgment IPC-112
RFC 2060, Internet Message Access Protocol - Version 4rev1 QC-32
RFC 2068, Hyptertext Transfer Protocol -- HTTP/1.1 QC-32
RFC 2091
Triggered Extensions to RIP to Support Demand Circuits IPC-208
RFC 2131, Dynamic Host Configuration Protocol QC-32
RFC 2138, RADIUS SC-130
RFC 2139, RADIUS Accounting SC-130
RFC 2166, DLSw Version 2 standard BC-282
RFC 2205, Resource Reservation Protocol QC-32, QC-249, QC-253
RFC 2206, RSVP Management Information Base using SMIv2 QC-249
RFC 2210, RSVP with IETF Integrated Services QC-246, QC-249
RFC 2211, Controlled-Load Network Element Service QC-249
RFC 2212, Specification of Guaranteed Quality of Service QC-249
RFC 2215, General Characterization Parameters for Integrated Service Network Elements QC-249
RFC 2236
Internet Group Management Protocol, Version 2 IPC-395
RFC 2236, Internet Group Management Protocol, Version 2 QC-32
RFC 2251, Lightweight Directory Access Protocol (v3) QC-32
RFC 2252, Lightweight Directory Access Protocol (v3) - Attribute Syntax Definitions QC-32
RFC 2253, Lightweight Directory Access Protocol (v3) - UTF-8 String Representation of Distinguished Names QC-32
RFC 2326, Real Time Steaming Protocol (RTSP) QC-32
RFC 2355, TN3270 Enhancements BC-249, BC-769
RFC 2362
Protocol-Independent Multicast-Sparse Mode (PIM-SM) IPC-395
RFC 2401, Security Architecture for the Internet Protocol QC-32, SC-334
RFC 2402, IP Authentication Header SC-334
RFC 2406, IP Encapsulating Security Payload QC-32
RFC 2408, ISAKMP SC-378
RFC 2409, The Internet Key Exchange SC-378
RFC 2410, The NULL Encryption Algorithm and Its Use with IPsec SC-334
RFC 2453, RIP Version 2 QC-32
RFC 2474, Definition of the Differentiated Services Field (DS Field) in the IPv4 and IPv6 Headers QC-26, QC-182, QC-376
RFC 2475, An Architecture for Differentiated Services Framework QC-26, QC-182, QC-376
RFC 2507
IP Header Compression IPC-428
RFC 2507, IP Header Compression QC-319
RFC 2508
Compressing IP/UDP/RTP Headers for Low-Speed Serial Links IPC-428
RFC 2508, Compressing IP/UDP/RTP Headers for Low-Speed Serial Links QC-319
RFC 2597, Assured Forwarding PHB QC-26, QC-182, QC-376
RFC 2598, An Expedited Forwarding PHB QC-26, QC-182, QC-376
RFC 2616, Hypertext Transfer Protocol -- HTTP/1.1 QC-32
RFC 2697, A Single Rate Three Color Marker QC-209, QC-376
RFC 2748, The COPS Protocol QC-253
RFC 2749, COPS Usage for RSVP QC-253
RFC 2865, RADIUS SC-130
RFC 2868, RADIUS Attributes for Tunnel Protocol Support SC-130
RGMP (Router-Port Group Management Protocol)
See IP multicast routing, RGMP
RGW (Residential Gateway)
configuring VC-187
examples of VC-181
in MGCP VC-181
rhosts file
rsh support FC-251
RIF (routing information field)
cache clearing BC-121
cache entry
static, adding (examples) BC-129, BC-130
static configuration BC-94
contents, displaying BC-121
enabling BC-93
ring group, establishing BC-94
source-route bridging BC-14, BC-84, BC-93
rif command BC-94
rif timeout command BC-94
rif validate-enable-age command BC-94
rif validate-enable command BC-94
rif validate-enable-route-cache command BC-94
ring, scheduling FDDI IC-54
ring cadence command VC-50, VC-79
ring frequency command VC-49, VC-78, VC-818
ring groups
(example) BC-125
definition BC-87
interface, assigning BC-88
SRB, defining BC-88
ring number command VC-50, VC-79, VC-818
ring splash, MGCP support of VC-182
RIP (Routing Information Protocol)
configuring H.323 proxy VC-339
IP
authentication IPC-203
authentication (example) IPC-389
automatic compared to interface route summarization IPC-204
automatic route summarization, disabling IPC-206
enabling IPC-200
hop count IPC-199
redistribution (example) IPC-376
route summarization IPC-203
(examples) 1
configuring 1
disabling 1
EIGRP 1
restrictions 1
specified interfaces 1
verifying 1
running with IGRP IPC-206
source IP address, disabling validation of IPC-207
timers, adjusting IPC-201
unicast updates, allowing IPC-201
version, specifying IPC-202
IPX
description P2C-139
sending of general query, disabling P2C-144
timers P2C-141
updates
delays 1
linking to SAP 1
linking to SAP updates 1
Net/One updates P3C-121
parameters XC-156
XNS updates
delay between updates P3C-128
Net/One environments P3C-121
timer (example) P3C-134
timers, setting P3C-128
RLM device configuration submode
summary FC-408
RLM group configuration submode
summary FC-407
rlogin
connection (example) TC-22
description TC-16
monitoring TC-21
rlogin trusted-localuser-source radius command DC-854
rlogin trusted-remoteuser-source local command DC-854
RMON (Remote Monitoring)
(examples) FC-5
agent status, displaying FC-4
alarms, setting FC-3
event table FC-3
feature description FC-1
queue size FC-3
rmon alarm command FC-3
rmon command FC-3
rmon event command FC-3
rmon queuesize command FC-3
RMP (Resource Manager Protocol), communication protocol for RPMS DC-735
robbed-bit signaling
(examples) DC-304
analog calls DC-262
configuring DC-278
ROM
booting from
automatically FC-201
manually FC-239
(example) 1
ROM monitor mode
booting
Flash FC-238
(example) 1
from MOP server FC-240
from network FC-239
ROM FC-239
system image FC-237
commands FC-16
aliasing FC-237
configuration register boot field FC-230
entering FC-238
summary FC-18
using system image instead of reloading FC-240
root bridges, selecting BC-50
root PROXY command SC-369
root SCEP command SC-369
root TFTP command SC-369
rotary calling pattern VC-277
configuration (example) VC-287
rotary command DC-148
rotary-group command DC-536
rotary groups VC-144
configuring DC-147
description DC-147
dialer DC-367
round trip time monitor
See SA Agent, RTTMON
route
distribution XC-321
processing XC-321
route aggregation, configuring NLSP
See NLSP
route-aggregation command P2C-106to P2C-114
route authentication SC-417
EIGRP IPC-265
RIP IPC-203
route cache
invalidation, controlling XC-17, XC-19
size XC-18
switching decision XC-5
route cache, size P2C-148
route cache invalidation, configuring DC-587
route cache invalidation, controlling P2C-149
route cost
DECnet P3C-44
setting P3C-43
route-map (IP) command QC-44, QC-48
route-map command P3C-88
for policy routing IPC-367
for redistribution IPC-361
route-map configuration mode
summary FC-409
defining QC-44
ISO IGRP, redistributing into P3C-88
PBR QC-24
policy routing, defining IPC-367
redistribution, defining IPC-361
router bgp command IPC-289, QC-48
router commands
router configuration mode FC-409
router configuration
command mode FC-409
data rate, parallel channels BC-632
microcode image BC-626to BC-631
Router Discovery Protocol IPC-29
route redistribution IPC-361
Enhanced IGRP, NLSP P2C-89
Enhanced IGRP and NLSP, (example) P2C-163
Enhanced IGRP NLSP, configuring P2C-115
See also redistribution
route reflector IPC-309
router eigrp command IPC-259
Router ForeSight (example) WC-215
router ID
See router prompt
router igrp command IPC-215, VC-339, VC-344
router iso-igrp command P3C-70
router level, specifying, IS-IS IPC-280
router mobile command IPC-167
router names FC-260
router odr command IPC-196
router ospf command IPC-225, IPC-234
router prompt
changing from default FC-152
router rip command IPC-200, VC-339
routers
architecture XC-6
as MPOA servers XC-445
dedicated dial-in (example) DC-49
IGRP dial-in (example) DC-50
in switched VLANs XC-321
label switching, enabling XC-83
packet headers, analyzing XC-87
PE XC-98
redundancy XC-124
router shutdown BC-627, BC-629
routes
advertise into multiprotocol BGP IPC-346
default, IP
gateway of last resort, determining IPC-360
specifying IPC-359
DVMRP, redistribute into multiprotocol BGP IPC-349
IGRP types IPC-213
multiprotocol BGP, redistribute into BGP IPC-342
static
GGSN, configuring MWC-26
VINES P3C-24
XNS P3C-128
static, IP configuration IPC-358
static, IPX P2C-139
routes, CTRC configuration BC-588
route summarization IPC-262
between OSPF areas IPC-230
disabling automatic route summarization IPC-206
EIGRP IPC-262
IS-IS addresses IPC-281
redistributing into OSPF IPC-230
RIP IPC-203
route target communities XC-154
routing
Apollo Domain P3C-9
asynchronous DC-153
default DC-153
between VLANs XC-321
concurrent routing and bridging BC-37
DDR, supported protocols DC-355, DC-370
decisions XC-6
unnumbered interfaces (example) DC-48
VINES P3C-17
routing, information, filtering task list IPC-364
routing, on Token Ring IC-71
routing, X.25 WC-289
routing cache, ISO CLNS
clearing P3C-96
entries, displaying P3C-96
reinitializing P3C-96
routing domain confederation IPC-308
Routing IP over CLNS
CTunnel destination, setting P3C-103
IP over a CLNS Tunnel Feature P3C-103
configuration
(example) 1
verifying 1
troubleshooting P3C-104
virtual interface, creating P3C-103
routing protocols XC-123, XC-166
for hot redundancy XC-130
for warm redundancy XC-130
routing table
BGP
updates IPC-291
Routing Table Protocol
See VINES, RTP
routing tables
AppleTalk P2C-55
controlling P2C-39
update timers P2C-41
AppleTalk, update filters P2C-23
BGP
attributes IPC-295
updates IPC-292
updates (BGP) IPC-292
IP
dynamic IPC-358
removing entries from IPC-214
static IPC-358
ISO CLNS
dynamic entries P3C-67
static entries P3C-67
RIP update timers P3C-128
XNS P3C-127
RP (rendezvous point)
See IP multicast routing, RP
See Unicast RPF
RPF (Reverse Path Forwarding)
See IP multicast routing, RPF
RPM (Resource Pool Management)
AAA accounting records DC-726
AAA components DC-759
AAA server groups DC-747
backup customer profiles DC-743
call discrimination, configuring DC-740
call discriminator profiles DC-724, DC-727
call processes DC-724
call treatments (table) DC-724
call types DC-721
CLID DC-721
CLID/DNIS screening DC-727
configuration (examples) DC-764to DC-773
configuring DC-752
customer profiles DC-743
default DC-743
types DC-719
dialer components DC-758
direct remote services (example) DC-770
DNIS groups DC-721
configuring DC-739
troubleshooting DC-759
verifying DC-755
incoming call management DC-718, DC-725
outgoing call management DC-718, DC-725
overview DC-717
profiles
backup customer DC-720
default customer DC-720
resource group manager DC-758
resource groups DC-722, DC-742, DC-754
configuring DC-742
resource pooling states DC-757
resource services DC-722
service profiles, configuring DC-742
session limits DC-731
signaling stack DC-758
standalone NAS DC-729
supported call types DC-721
troubleshooting DC-756
verifying DC-753
VPDN groups
configuring DC-748
description DC-723
responsibility DC-759
verifying DC-755
VPDN profiles DC-723, DC-748, DC-759
RPMS (Resource Pool Manager Servers)
resource groups and DC-740
RMP, relationship to DC-735
troubleshooting DC-763
RPS (Ring Parameter Server), LNM BC-103
RRQ message
RAS VC-221
RSA (Rivest, Shamir, and Adelman) encrypted nonces SC-379
IKE policy parameter SC-383
RSA (Rivest, Shamir, and Adelman) keys SC-360
configuring, manually SC-386
purpose SC-367
specifying SC-388
See also certificates; certification authority interoperability SC-367
RSA (Rivest, Shamir, and Adelman) signatures SC-379
IKE policy parameter SC-383
requirements SC-384
IKE configuration SC-386
rsh (remote shell) FC-153
authentication database
adding entries (example) FC-251
Cisco's implementation FC-249
commands from remote users
supporting (example) FC-251
disabling FC-251
remote command execution, allowing FC-251
remotely executing commands FC-252
(example) FC-252
security FC-251
using FC-251
rsh command FC-252
RSM/VIP2 (Route Switch Module/Versatile Interface Processor 2) XC-442
RSP card
master and slave FC-445
slave software image FC-438
software image FC-435
RSRB (remote source-route bridging)
all transport types (example) BC-269
Cisco implementation BC-202, BC-251
configuration (examples) BC-265to BC-280
CoS, enabling BC-264
direct encapsulation configuration BC-254
direct Frame Relay encapsulation
(example) BC-266
configuration BC-261
DSPU configuration BC-518
FST
connection (example) BC-268
encapsulation configuration BC-256
largest frame BC-264
load sharing (example) BC-278
local acknowledgment
(example) BC-270
passthrough (example) BC-273
passthrough (example) BC-273
SNA Service Point configuration BC-528
TCP encapsulation
(example) BC-266
configuration BC-257
local acknowledgment configuration BC-258
TCP remote peer, identifying BC-257
RSVP (Resource Reservation Protocol) VC-167, XC-88
ATM considerations QC-265
bandwidth
considerations QC-263
restricting QC-294
configuring QC-265
COPS
configuring QC-303
feature description QC-252, QC-303
functionality QC-253
verifying QC-305
enabling QC-265, QC-276, QC-294
filters and bandwidth, displaying QC-269
Frame Relay support
configuration (example) QC-287
configuring QC-281
considerations QC-264
described QC-247
monitoring QC-287
verifying QC-285
how it works QC-245
implementation considerations QC-264
interface information, displaying QC-268, QC-269, QC-297
LAN resource support QC-258
multicast
destinations, specifying QC-267
session, configuration (example) QC-269
neighbor reservations, limiting QC-267
neighbors, displaying QC-269
overview QC-244
planning QC-263
real-time traffic problems QC-262
receiver information, displaying QC-269
RED, relationship with QC-262
request information, displaying QC-269
SBM, configuring QC-308
scalability QC-244
sender information, displaying QC-269
Shared Explicit reservation QC-263
traps, enabling QC-268
uses QC-87
WFQ, relationship with QC-87, QC-262
Wild Card Filter QC-263
WRED QC-175
RSVP-ATM QoS Interworking feature
configuration (example) QC-297
connection over ATM cloud (figure) QC-251
data path QC-251
example scenario QC-251
IP Precedence value
configuring QC-268
setting QC-250
monitoring QC-297
NetFlow attachment QC-267
peak rate limit, setting QC-296
per-VC DWRED, configuring QC-296
prerequisites QC-293
restrictions QC-293
RSVP
bandwidth, restricting QC-294
enabling QC-294
ToS bits, setting QC-250
ToS value, configuring QC-268
rtchk command P3C-2
RTMP (Routing Table Maintenance Protocol) P2C-2
definition P2C-2
interfaces P2C-15
routes with no zones, advertising P2C-40
routing tables, update timers P2C-41
routing updates P2C-40
strict checking P2C-39
stub mode P2C-40
RTP
See VINES, RTP
RTP (Real-Time Transport Protocol)
description IPC-424
See also RTP header compression
RTP (Real-time Transport Protocol), description of IC-90
RTP header compression WC-205
(examples) IPC-445
and TCP header compression, enabling IPC-426
configuration (example) QC-339
connections supported IPC-426, QC-339, QC-342
description IPC-424
Frame Relay
encapsulation, using QC-338
statistics, displaying QC-339
Frame Relay encapsulation
(example) IPC-447
using IPC-426
Frame Relay statistics, displaying IPC-440
how it works (figure) QC-317
PPP encapsulation (example) IPC-446, QC-342, QC-343
RTP header QC-317
statistics
clearing IPC-440
displaying IPC-441
statistics, displaying QC-339
supported protocols IPC-425
See also CRTP
RTR
See SA Agent
RTR (Response Time Reporter)
overview VC-538
probe enhancements
configuring VC-555
RTR configuration mode
entering FC-428
summary FC-410
RTR HTTP Raw configuration submode
(example) FC-366
RTR HTTP Raw Request Configuration Mode
summary FC-410
rtr key-chain command FC-350
rtr low-memory command FC-352
rtr reaction-configuration command FC-349
rtr reaction-trigger command FC-349
rtr reset command FC-350, FC-351
rtr schedule command FC-349, FC-355, FC-356
RTSP (Real Time Streaming Protocol), CBAC inspection and support of SC-227
run-from-Flash systems
Flash Load Helper FC-215
image downloading tasks FC-187
running configuration
copying
from an rcp server (example) FC-159, FC-161
to an rcp server FC-155to FC-157
rxspeed command TC-12
terminal form FC-87
S
SAA (Service Assurance Agent)
probe enhancements VC-540
SA Agent (Service Assurance Agent)
configuration task list FC-340
(examples) FC-359
HTTP operation
Raw submode FC-366
monitoring FC-351
operations
description FC-341
types FC-342
RTTMON use in FC-340
SAID (Security Association Identifier)
IEEE 802.10 XC-349
samples-of-history-kept command FC-348
SAP (Service Access Point)
CMCC internal adapter
configuration guidelines BC-616to BC-618
limit BC-616
MAC/SAP quadruple BC-617
reserved values BC-616
CMPC guidelines BC-693
CSNA guidelines BC-678, BC-679
IEEE (table) BC-618
manufacturer (table) BC-618
SDLC configuration BC-404
TN3270 server
direct PUs BC-770
DLUR, configuration BC-810
SAP (Service Advertisement Protocol)
delay between packets, setting P2C-137, P2C-138
description P2C-4
filters
creating P2C-131
filters (example) P2C-174
filters, (examples) P2C-175
filters, creating P2C-131
general query
disabling P2C-144
general query, disabling P2C-144
queue length, setting P2C-142
responses to GNS requests, controlling P2C-144
static entries, configuring P2C-142
table, static entries P2C-142
updates
Enhanced IGRP P2C-90
linking to RIP P2C-144
setting P2C-142
update timers P2C-143
SAP and RIP updates, synchronizing P2C-144
sap-priority command BC-684, BC-685, BC-700
sap-priority-list command BC-684, BC-685, BC-700
SAR, AIP WC-19
SAs (security associations) SC-336, SC-380
establishing SC-380
IKE established crypto map entries, creating SC-352
lifetimes
configuring SC-385
global values, configuring SC-341
how they work SC-342
IKE policy parameter SC-383
manually established
crypto access lists, defining SC-344
crypto map entries, creating SC-350
viewing SC-396
satellite link IPC-497
SBM (Subnetwork Bandwidth Manager)
configuration (example) QC-310
configuring QC-275, QC-303, QC-307
interface information, displaying QC-309
overview QC-258
prerequisites QC-308
restrictions QC-258
SBM state configuration, verifying QC-309
See also DSBM
in VLANs XC-318
scalability, configuring (example) SC-57
scheduler allocate command FC-280
scheduler interval command FC-280
scramble command IC-121, IC-124
screen
length FC-84
refresh FC-27
width FC-84
script arap-callback command DC-645
script callback command DC-643, DC-644
script dialer command DC-692
regular expressions in DC-861
SDLC (Synchronous Data Link Control)
buffer size, controlling BC-402
configuration
(examples) BC-405
displaying BC-404
task list BC-398
DLSw+
configuration (example) BC-407
support BC-399
encapsulation for Frame Relay access support configuration (example) BC-406
frame size, controlling BC-401
FRMR configuration BC-401
largest I-frame size specification BC-404, BC-425
line speed, increasing BC-426
local acknowledgment
enabling BC-344
priority queueing BC-344
multilink transmission group
configuration BC-345
multilink transmission groups
design recommendations BC-345
output buffering BC-402
primary node BC-343
primary station, two-way simultaneous mode, enabling BC-400
protocol, controlling BC-401
retry counts, controlling BC-401
SAP configuration BC-404
secondary node BC-343
secondary station polling
configuration BC-400
control BC-402
STUN, local acknowledgement (example) BC-354
timer, controlling BC-401
transport protocol, choosing BC-338
two-way simultaneous mode
configuration (example) BC-405
enabling BC-400
window size, controlling BC-401
XID configuration BC-403
sdlc address command BC-293, BC-400, BC-522
sdlc cts-delay command
See half-duplex timer command
sdlc dlsw command BC-294
sdlc frmr-disable command BC-401
sdlc holdq command BC-402
sdlc k command BC-401
sdlc n1 command BC-401
sdlc n2 command BC-401
sdlc partner command BC-293
sdlc poll-limit-value command BC-402, BC-403
sdlc role command BC-293, BC-399, BC-521
sdlc rts-timeout command
See half-duplex timer command
sdlc sdlc-largest-frame command BC-425
sdlc simultaneous command BC-400
sdlc t1 command BC-401
sdlc test command BC-404
sdlc virtual-multidrop command BC-340
sdlc vmac command BC-293
SDLLC (SDLC Logical Link Control)
Cisco implementation BC-217, BC-387
configuration
(examples) BC-435
task list BC-420
customizing BC-425
Ethernet and translational bridging configuration BC-424
frame size differences, resolving BC-219, BC-388, BC-415
I-frame sizes, largest, LLC2 specification BC-425
LOCADD definition BC-445
local acknowledgment state, displaying BC-426
media translation, customizing BC-425
performance, host MAXOUT value BC-426
RSRB and local acknowledgment configuration BC-423
virtual Token Ring implementation BC-218, BC-388, BC-415
sdllc partner command BC-421
sdllc ring-largest-frame command BC-425
sdllc traddr command BC-421
sdllc xid command BC-421
SDM (Security Device Manager) QC-415
searching
at --More-- prompts FC-34
more commands FC-34
show commands FC-33
secondary addresses
IP
assigning IPC-9
in networking subnets (example) IPC-50
use in Frame Relay and SMDS (example) IPC-210, IPC-220
secondary networks, IPX
See IPX, secondary networks
secondary stations
enabling routing device as BC-398
polling control BC-402
security XC-318
CICS BC-582
filtering XC-313
GGSN
configuring on MWC-35to MWC-44
See also AAA (authentication, authorization, and accounting)
See also Cisco IOS Security Configuration Guide
See also IKE (Internet Key Exchange) security protocol
See also IPSec (IPSec network security protocol)
See also RADIUS (Remote Access Dial-In User Service)
H.235 VC-219
H.235 (example) VC-362
IP
denial-of-service attacks SC-213, SC-441
IPSO SC-423
TCP SYN-flooding attacks SC-213, SC-441
neighbor router authentication SC-417
policies
creating SC-6
nature of SC-6
tips SC-7
risks SC-9
See also access lists; authentication; IPSec
TN3270 server configuration BC-791
VLANs XC-313
IP
See also DNSIX; lock-and-key; Reflexive Access Lists; TCP Intercept
security, ARA
configuring TC-70
internal username authentication TC-72
TACACS TC-73
security, EIGRP (Enhanced IGRP) IPC-265
security command VC-317
security configuration submode
summary FC-416
security features SC-1
security levels XC-98
security password command VC-219, VC-268
security precautions
Flash memory card FC-213
security token required-for command VC-219
See alsoVINES
seed router, AppleTalk P2C-14
with VLANs XC-321
selection facility suppression
See X.25, CUGs
selective acknowledgment, TCP IPC-112
Semipermanent Circuit Support on ISDN PRI feature DC-269, DC-326
send command FC-95
senders command IPC-516
send-lifetime command
EIGRP (Enhanced IGRP) IPC-266
for DRP IPC-85
sequence-numbers command VC-399, VC-434
sequence numbers in prefix list IPC-298
sequence values in prefix lists IPC-298
serial, low-speed
DTE, transmit IC-142
serial interfaces
ATM
(example) WC-118
description WC-93
enabling WC-94
HSSI WC-94
BSTUN
assigning BC-366
configuration BC-366
configuring IC-86
(examples) DC-456
asynchronous interfaces (example) DC-456
configuring DC-454
ISDN interfaces (example) DC-457
line delay DC-456
traffic load threshold DC-455
DTR signal pulsing IC-100
HDLC encapsulation, default WC-266
high-speed IC-83
LAT compression BC-42
low-speed IC-142
PA-2JT2 configuration (example) IC-161
PA-E3 port adapter configuration (example) IC-152
parallel BC-58
PA-T3 port adapter configuration (example) IC-153
synchronous
encapsulation IC-87
supporting cards IC-86
synchronous, maintaining BC-637
transmit delay IC-100
See also interfaces
serial interfaces, IP example IPC-50
serial line, encapsulation IC-87
serial line, LAPB over WC-260
serial or Ethernet interface
hoot and holler, configuring VC-844
serial restart-delay command VC-738
server connections
SLIP DC-583
TN3270 TC-47
XRemote TC-55
serverfarm command IPC-143
server farms
See server load balancing
server farms, server load balancing IPC-133
server group radius configuration mode
summary FC-410
server groups
AAA, authentication SC-22
AAA, authorization SC-71
deadtime, configuring SC-118
RADIUS, configuring SC-117
TACACS+, configuring SC-145
server groups, AAA
broadcast accounting SC-94
server group tacacs configuration mode
summary FC-410
server load balancing
algorithms IPC-135
description IPC-133
DFP configuration mode, summary FC-411
server farm, specifying IPC-141
server-farm configuration mode, summary FC-411
virtual server configuration mode, summary FC-411
server registration-port command VC-220, VC-325
servers
configuring routers as FC-243
NASI, configuring TC-89
proxy VC-368
RADIUS DC-696
AV pairs DC-700
redirect VC-368
registrar VC-368
TACACS DC-696
AV pairs DC-700
TFTP nonresident fonts, enabling TC-54
servers, CTRC
CICS configuration BC-587
DB2 configuration BC-588
server trigger command VC-220, VC-327
Service Assurance Agent
See SA Agent
service class XC-98
service compress-config command FC-162, FC-163
service config command FC-174, FC-175
service dhcp command IPC-66
service exec-callback command DC-644
service exec-wait command FC-278
service finger command FC-263
service gprs command MWC-18
service gprs ggsn command MWC-49
service hide-telnet-address command FC-263
service internal command DC-758
Service Level Agreements (SLA) FC-339
service linenumber command TC-14
service models, end-to-end
best-effort service QC-4
differentiated service QC-4
integrated service QC-4
service-module 56k clock rate command IC-140
service-module 56k clock source command IC-139
service-module 56k data-coding command IC-140
service-module 56k data-coding scrambled command IC-140
service-module 56k network-type command IC-141
service-module 56k remote-loopback command IC-141
service-module 56k switched-carrier command IC-142
service modules
2- and 4-wire CSU/DSU
clock source IC-139
DDS mode IC-141
dialup mode IC-141
Cisco 2524 2- and 4-wire CSU/DSU IC-139
Cisco 2525 2- and 4-wire CSU/DSU IC-139
T1/fractional T1 IC-134
remote loopback IC-137
service-module t1 clock source command IC-135
service-module t1 data-coding inverted command IC-135
service-module t1 framing command IC-136
service-module t1 lbo command IC-136
service-module t1 lbo none command IC-136
service-module t1 linecode command IC-136
service-module t1 remote-alarm-enable command IC-137
service-module t1 remote-loopback full command IC-137
service-module t1 remote-loopback payload command IC-137
service-module tx1 data-coding normal command IC-135
service nagle command FC-280
service policies
CBWFQ, enabling QC-122, QC-363
classes, deleting QC-124
configuration (example) QC-144
information, displaying QC-124, QC-139, QC-230
LLQ, enabling for Frame Relay QC-139
service-policy command
GTS QC-230
LLQ for Frame Relay QC-139
NBAR QC-73
policy maps, attaching QC-192
traffic policies
DTS QC-238
interfaces, attaching QC-405
service-policy input command QC-75, QC-405
service-policy output command QC-75, QC-405
service provider backbone XC-142
service providers
large-scale dial DC-839
PPP over X.25 dial DC-854
small-to-medium-scale dial DC-829
service pt-vty-logging command TC-147
services, LAT
available TC-34
broadcast announcements TC-30
description TC-26
inbound, enabling TC-30
LAN (example) TC-36
logical partitioning TC-36
service slave-log command FC-289
services manager
See MNLB services manager
service tcp-keepalives command FC-288
service tcp-keepalives-in command WC-292
service tcp-keepalives-out command WC-292
service tcp-small-servers command FC-261
service telnet-zero-idle command FC-279
service timestamps command FC-290, FC-300
service translation command WC-238
service udp-small-servers command FC-261
session context VC-166
session filtering
See Reflexive Access Lists
Session Initiation Protocol (SIP) VC-365
session-limit command TC-14
session protocol aal2 command VC-432
session protocol cisco-switched command VC-435
session protocol command VC-376, VC-397
session protocol multicast command VC-840
session protocol smtp command VC-694
sessions
BGP
default version IPC-302
resetting IPC-303
ending FC-76
exiting FC-96
saving user changes between FC-75
SNMP FC-319
switching between FC-93
sessions, LAT virtual circuits TC-32
session target (ATM) command VC-433
session target command VC-123, VC-244, VC-247, VC-273, VC-377, VC-379, VC-396, VC-549, VC-694, VC-748, VC-841, VC-880
session target ras command VC-254
session timeout command FC-103
session-timeout command TC-14
session transport command VC-376
set 1 number command DC-795
set 2 number command DC-795
set as-path command IPC-362
set atm-clp command QC-66
set automatic-tag command IPC-362
set bridging command DC-795
set bridging off command DC-791
set callerid command DC-792
set comm-list delete command IPC-305
set community command IPC-362
set configserver command XC-380
set cos command QC-65
set dampening command IPC-362
set default command DC-791
set default interface command IPC-368, QC-44
set dhcp dns primary command DC-795
set dhcp domain command DC-795
set dhcp server command DC-795
set dhcp wins command DC-795
set encapsulation ppp command DC-791, DC-795
setenv command TC-57
set interface command IPC-368, QC-44
set ip address command DC-791
set ip command DC-791
set ip default next-hop command IPC-368, QC-44
set ip df command
PBR QC-44
set ip dscp command QC-64, QC-405
set ip framing command DC-795
set ip next-hop (BGP) command IPC-301
set ip next-hop command IPC-368, QC-44
set ip next-hop verify-availability command IPC-369, XC-76
set ip pat command DC-795
set ip precedence command IPC-368
DSCP value, configuring QC-64
IP Precedence value, configuring QC-64
PBR QC-44
policy propagation QC-48
set ip route destination command DC-791, DC-795
set ip routing command DC-791, DC-795
set ip vrf command
PBR QC-44
set level command IPC-362, P3C-89
set localaccess protected command DC-792
set local-preference command IPC-362
set metric command IPC-362, P3C-89
set metric command (IGRP or EIGRP) IPC-362
set metric-type command IPC-362, P3C-89
set metric-type internal command IPC-363
set next-hop command IPC-362
set origin command IPC-362
set-overload-bit command IPC-282
set password system command DC-792
set peer (IPSec) command MWC-44
set peer command SC-351, SC-352, SC-355
set pfs command MWC-44, SC-353, SC-355, SC-395
set ppp authentication incoming chap command DC-792
set ppp multilink command DC-791, DC-795
set ppp secret client command DC-791, DC-795
set qos-group command QC-65, QC-66, QC-405
set remoteaccess protected command DC-792
set security-association level per-host command MWC-44, SC-352
set security-association lifetime command MWC-44, SC-352, SC-355, SC-395
set session-key command SC-351
set systemname command DC-791, DC-795
set tag command IPC-363, P3C-89
set timeout command DC-791
settlement
gatekeeper VC-264
settlements
configuration tasks list VC-506
configuring
examples VC-520
inbound VoIP dial peer VC-512
outbound POTS dial peer VC-513
outbound VoIP dial peer VC-510
PKI multiple roots VC-515
public key infrastructure VC-507
roaming VC-514
roaming patterns on originating gateway VC-514
settlement provider VC-511
suggested route VC-516
terminating gateway VC-511
restrictions VC-506
set transform-set command MWC-44, SC-351, SC-352, SC-354
Setup
configuration command script
(example) FC-65
configuration file, saving FC-62, FC-67
configuration register FC-62
description FC-62
global parameters
(example) FC-63
interface parameters
(example) FC-63
interface summary, viewing FC-63
sample configuration FC-63to FC-68
streamlined setup facility
(example) FC-68
using after corrupted startup FC-68
streamlined setup utility FC-68
System Configuration Dialog
(example) FC-63
terminating the configuration FC-63
using after first-time startup FC-61
set user nas command DC-791, DC-795
set vlan command BC-176
set weight command IPC-362
sgbp dial-bids command DC-681
sgbp group command DC-634, DC-678
sgbp member command DC-634
sgbp seed-bid command DC-638
sgbp seed-bid default command DC-638
sgbp seed-bid offload command DC-638
SGCP (Simple Gateway Control Protocol) VC-179
availability VC-179
migration to MGCP VC-181
SG radius
See server group radius configuration mode
SGSN (serving GPRS support node), description MWC-7, MWC-11
SG tacacs
See server group tacacs configuration mode
SHA (Secure Hash Algorithm) SC-335, SC-379
IKE policy parameter SC-383
shape max-buffers command QC-230
shaping
traffic VC-170
shaping, token bucket QC-204
shaping tools VC-169
shaping traffic VC-170
Shared Explicit reservation, RSVP QC-263
shelf-id command DC-107
Shiva FastPath router, K-Star P2C-11
shortcut-frame-count command XC-447
shortcut-frame-time command XC-447
shortcuts
for commands
See command aliases
show access-expression command BC-120
show access-list compiled command IPC-118
show access-lists command IPC-118, QC-59, SC-198
show access-lists rate-limit command QC-59
show adjacency command XC-47
show aliases command FC-261
show alps ascu command BC-503
show alps circuits command BC-503
show alps peers command BC-503
show apollo arp command P3C-12
show apollo interface command P3C-12
show apollo route command P3C-12
show apollo traffic command P3C-12
show appletalk access-lists command P2C-55
show appletalk adjacent-routes command P2C-55
show appletalk arp command P2C-55, TC-78
show appletalk aurp events command P2C-55
show appletalk aurp topology command P2C-55
show appletalk cache command P2C-55
show appletalk domain command P2C-55
show appletalk eigrp interfaces command P2C-55
show appletalk eigrp neighbors command P2C-55
show appletalk eigrp topology command P2C-55
show appletalk globals command P2C-55
show appletalk interface command P2C-55, TC-78
show appletalk macip-clients command P2C-55, TC-78
show appletalk macip-servers command P2C-55, TC-78
show appletalk macip-traffic P2C-55
show appletalk macip-traffic command TC-78
show appletalk name-cache command P2C-55
show appletalk nbp command P2C-55
show appletalk neighbors command P2C-55
show appletalk remap command P2C-55
show appletalk route command P2C-55
show appletalk socket command P2C-55
show appletalk static command P2C-55
show appletalk traffic command DC-380, DC-410, DC-437, P2C-55, TC-78
show appletalk zone command P2C-55, TC-78
show aps command IC-132, IC-133
show arap command TC-77
show arp command IPC-48, WC-96, WC-253
show async bootp command DC-41
show async-bootp command FC-249
show async status command DC-41
show atm bundle command QC-362
show atm bundle statistics command QC-362
show atm class-links command WC-96
show atm interface atm command WC-96
show atm map command QC-362, WC-96
show atm pvc command WC-96
show atm svc command WC-96
show atm traffic command WC-96
show atm vc command VC-440, WC-96
show atm video-voice address command VC-442
show boot command FC-151, FC-179, FC-229, FC-233, FC-234, FC-435, FC-445
CONFIG_FILE environment variable
specifying FC-172
show bridge circuit-group command BC-59
show bridge command BC-59
show bridge multicast command BC-59
show bstun command BC-370
show buffers command DC-185, DC-210, FC-281
show busyout command DC-94
show calendar command FC-277
show call active voice command VC-99
(examples) VC-106
show caller command DC-545
show call fallback cache command VC-556
show call fallback config command VC-556
show call fallback stats command VC-556
show call history voice command VC-99
(examples) VC-107
show ccm-manager command VC-189
show cdp command FC-330
show cdp entry command FC-330
show cdp interface command FC-330
show cdp neighbors command FC-330
show cdp traffic command FC-330
show cef command XC-47
show cef interface command XC-47
show cef linecard command XC-47
show class-map command QC-75, QC-406
show clns cache command P3C-96
show clns command P3C-96
show clns es-neighbors command P3C-96
show clns filter-expr command P3C-96
show clns filter-set command P3C-96
show clns interface command P3C-96
show clns is-neighbors command P3C-96
show clns neighbor areas command P3C-97
show clns neighbors command P3C-96
show clns protocol command P3C-97
show clns route command P3C-97
show clns traffic command P3C-97
show clock command FC-277
show cmns command WC-319
show commands
using for troubleshooting
(list) FC-286
show commands, filtering ourput FC-33
show compress command WC-202
show configuration command
See show startup-config command
show controller cbus command FC-436
show controller command VC-99
(examples) VC-104
show controller fastethernet command IC-32
show controller gigabitethernet command IC-33
show controller pos command IC-132
show controllers atm command WC-96
show controllers bri command DC-196, DC-277, DC-342
show controllers cbus command BC-631, BC-634, BC-688, BC-704, IC-32, IC-71, IC-114
show controllers channel command BC-631, BC-634, BC-688, BC-704
show controllers command IC-32, IC-71, IC-133, IC-143
show controllers e1 command DC-276, DC-341
show controllers logging FC-293
show controllers mci command IC-32
show controllers serial command IC-122, IC-124
show controllers t1 command DC-276
show controllers token command BC-120, BC-265, IC-71
show controller t1 command IC-171, IC-173
show controller t3 command IC-114, IC-115
show cops servers command QC-305
show crypto ca certificates command SC-373
show crypto ca roots command SC-373
show crypto dynamic-map command SC-357
show crypto ipsec sa command SC-357
show crypto ipsec security-association lifetime command SC-357
show crypto ipsec transform-set command SC-357
show crypto isakmp policy command SC-385, SC-396
show crypto isakmp sa command SC-396
show crypto key mypubkey rsa command SC-373, SC-387
show crypto key pubkey-chain rsa command SC-373, SC-388
show crypto map command SC-357
show dbconn connection command BC-599
show dbconn license command BC-598, BC-599
show dbconn ports command BC-599
show dbconn server command BC-599
show debugging command BC-597, BC-598, BC-599, DC-549, FC-299, FC-300, FC-330
show decnet command P3C-53
show decnet interface command P3C-53
show decnet map command P3C-53
show decnet neighbors command P3C-53
show decnet route command P3C-53
show decnet static command P3C-54
show decnet traffic command DC-380, DC-410, DC-437, P3C-54
show diag command DC-209
show dialer command DC-196, DC-276, DC-277, DC-379, DC-410, DC-448, DC-657, DC-668, DC-741
show dialer dnis command DC-752, DC-755
show dialer map command DC-668
show dialer sessions command DC-686
show dial-peer voice command VC-440, VC-443, VC-881
show dial-shelf clocks command DC-110
show dlsw capabilities command BC-299, BC-311
show dlsw capabilities local command BC-310
show dlsw circuits command BC-311
show dlsw fastcache command BC-311
show dlsw peers command BC-311
show dlsw reachability command BC-311
show dlsw statistics command BC-311
show drip command BC-153, BC-181
show dsi command DC-116
show dsip clients command DC-115
show dsip command DC-115
show dsip nodes command DC-115
show dsip ports command DC-115
show dsip queue command DC-115
show dsip tracing command DC-115
show dsip transport command DC-116
show dsip version command DC-116
show dspu command BC-531
show dxi map command WC-95
show dxi pvc command WC-95
show extended channel backup command BC-634, BC-664
show extended channel cmgr command BC-634, BC-758
show extended channel cmpc command BC-634, BC-708, BC-749
show extended channel command BC-632
show extended channel connection-map llc2 command BC-634, BC-691, BC-710
show extended channel csna command BC-634, BC-710
show extended channel csna oper command BC-691
show extended channel icmp-stack command BC-634, BC-664
show extended channel ip-stack command BC-634, BC-664
show extended channel llc2 command BC-634, BC-710
show extended channel max-llc2-sessions command BC-634, BC-710
show extended channel packing names command BC-634, BC-664
show extended channel packing stats command BC-634, BC-664
show extended channel statistics command BC-634, BC-689, BC-749
show extended channel subchannel command BC-634
show extended channel tcp-connections command BC-635, BC-664
show extended channel tcp-stack command BC-635, BC-664
show extended channel tg command BC-635, BC-708, BC-749
show extended channel tn3270-server client-ip-address command BC-635, BC-826
show extended channel tn3270-server command BC-635, BC-826
show extended channel tn3270-server dlur command BC-635, BC-826
show extended channel tn3270-server dlurlink command BC-635, BC-826
show extended channel tn3270-server nailed-ip command BC-826
show extended channel tn3270-server pu command BC-635, BC-826
show extended channel tn3270-server pu lu command BC-635, BC-826
show extended channel tn3270-server response-time application command BC-635, BC-826
show extended channel tn3270-server response-time global command BC-635, BC-826
show extended channel tn3270-server response-time link command BC-635, BC-826
show extended channel tn3270-server response-time listen-point command BC-635
show extended channel tn3270-server response-time subnet command BC-635, BC-826
show extended channel tn3270-sever nailed-pu command BC-635
show extended channel udp-listeners command BC-635
show extended channel udp-stack command BC-635
show file command FC-151
show file descriptors command FC-139
show file information command FC-139
show file systems command FC-137, FC-214, FC-445
show flash command FC-179, FC-214
show flh-log command FC-218
show frame-relay ip rtp header-compression command IPC-440, QC-339
show frame-relay lmi command WC-206
show frame-relay map command WC-207
show frame relay pvc command QC-129
show frame-relay pvc command WC-207
show frame-relay route command WC-207
show frame-relay traffic command WC-207
show fras map command BC-455
show gateway command VC-252
show gprs access-point all command MWC-51
show gprs access-point command MWC-53
show gprs charging parameters command MWC-53
show gprs charging statistics command MWC-53
show gprs gtp parameters command MWC-53
show gprs gtp path command MWC-53
show gprs gtp pdp-context command MWC-54
show gprs gtp status command MWC-54
show gprs isgsn statistics command MWC-53
show history command FC-24
show hosts command IPC-48, WC-300
show ima interface atm command WC-97
show interface async command DC-37
show interface channel command BC-632
show interface channel statistics command BC-689, BC-692, BC-706
show interface command QC-239
show interface fastethernet command IC-32
show interface gigabitethernet command IC-33
show interface pos command IC-132, IC-133
show interfaces atm command WC-95, WC-97
show interfaces bri command DC-185, DC-196, DC-210, DC-379, DC-410, DC-437
show interfaces channel accounting command BC-636
show interfaces channel command BC-688, BC-689, BC-705, BC-706
show interfaces command BC-121, BC-265, BC-404, IC-32, IC-71, QC-117, QC-161
show interfaces crb command BC-59
show interfaces ctunnel command IC-182
show interfaces dspfarm command VC-65
show interfaces fair-queue command QC-115, QC-117
show interfaces fddi command IC-51
show interfaces irb command BC-38, BC-59
show interfaces port-channel command IC-50
show interfaces rate-limit command QC-59
show interfaces serial 0/0 command IC-91, IC-93, IC-96
show interfaces serial bchannel command DC-277
show interfaces serial command BC-426, DC-341, IC-114, IC-122, IC-124, WC-206, WC-317, WC-319
show interface stats command XC-3
show interfaces virtual-access command DC-486
show interface virtual-access command DC-545, TC-145
show ip access-list command DC-704, IPC-118
show ip accounting checkpoint command IPC-118
show ip accounting command IPC-108
show ip aliases command IPC-48
show ip arp command IPC-48
show ip bgp cidr-only command IPC-324
show ip bgp command IPC-324, QC-50
show ip bgp community command IPC-324
show ip bgp community-list command IPC-324, QC-50
show ip bgp dampened-paths command IPC-323
show ip bgp filter-list command IPC-324
show ip bgp flap-statistics command IPC-322
show ip bgp inconsistent-as command IPC-324
show ip bgp neighbors command IPC-324
show ip bgp paths command IPC-324
show ip bgp peer-group command IPC-324
show ip bgp regexp command IPC-324
show ip bgp summary command IPC-324
show ip cache command XC-18
show ip cache flow aggregation destination-prefix command XC-75
show ip cache flow aggregation prefix command XC-75
show ip cache flow aggregation source-prefix command XC-75
show ip cache flow command XC-72
show ip cache policy command IPC-373, QC-45
show ip casa affinities command IPC-119
show ip casa oper command IPC-119
show ip casa stats command IPC-119
show ip casa wildcard command IPC-119
show ip cef adjacency command XC-47
show ip cef command QC-50, XC-34, XC-47
show ip cef events command XC-47
show ip cef exact-route command XC-47
show ip cef inconsistency command XC-48
show ip cef summary command XC-186
show ip cef traffic prefix-length command XC-47
show ip dhcp binding command IPC-74
show ip dhcp conflict command IPC-74
show ip dhcp database command IPC-74
show ip dhcp import command IPC-74
show ip dhcp server statistics command IPC-74
show ip drp command IPC-118
show ip dvmrp route command IPC-537
show ip eigrp interfaces command IPC-273
show ip eigrp neighbors command IPC-273
show ip eigrp topology command IPC-273
show ip eigrp traffic command IPC-273
show ip igmp groups command IPC-440
show ip igmp interface command IPC-440, IPC-504
show ip igmp udlr command IPC-503
show ip inspect command SC-242
show ip interface command DC-704, IPC-48, QC-50
show ip interfaces command XC-47
show ip irdp command IPC-48
show ip local policy command IPC-373, QC-46
show ip local pool command DC-704
show ip masks command IPC-48
show ip mcache command IPC-440, XC-3
show ip mds forwarding command XC-3
show ip mds interface command XC-3
show ip mds stats command XC-3
show ip mds summary command XC-3
show ip mobile binding command IPC-170
show ip mobile globals command IPC-170
show ip mobile host command IPC-170
show ip mobile host group command IPC-170
show ip mobile interface command IPC-170
show ip mobile secure command IPC-170
show ip mobile traffic command IPC-170
show ip mobile tunnel command IPC-170
show ip mobile violation IPC-170
show ip mobile visitor command IPC-170
show ip mpacket command IPC-440
show ip mrm interface command IPC-517
show ip mrm manager command IPC-517
show ip mrm status-report command IPC-517
show ip mroute command IPC-440, IPC-469
show ip msdp count command IPC-481
show ip msdp peer command IPC-481
show ip msdp sa-cache command IPC-481
show ip msdp summary command IPC-481
show ip nat translations command IPC-46
show ip nbar port-map command QC-76
show ip nbar protocol-discovery command QC-76
show ip nhrp command IPC-49, P2C-157
show ip nhrp traffic command IPC-49, P2C-157
show ip ospf border-routers command IPC-239
show ip ospf command IPC-239
show ip ospf database command IPC-240
show ip ospf flood list command IPC-239, IPC-240
show ip ospf interface command IPC-240
show ip ospf neighbor command IPC-240
show ip ospf request-list command IPC-240
show ip ospf retransmission-list command IPC-240
show ip ospf summary-address command IPC-240
show ip ospf virtual-links command IPC-240
show ip pgm host defaults command IPC-493
show ip pgm host sessions command IPC-490, IPC-493
show ip pgm host traffic command IPC-491, IPC-493
show ip pgm router command IPC-494
show ip pim bsr command IPC-416
show ip pim interface command IPC-440, IPC-469, IPC-470
show ip pim interface count command XC-3
show ip pim neighbor command IPC-441
show ip pim rp command IPC-402, IPC-441, IPC-470
show ip pim rp-hash command IPC-416
show ip pim rp mapping command IPC-469
show ip pim vc command IPC-441
show ip policy command IPC-373
show ip port-map command SC-326
show ip protocols command DC-704, IPC-373
show ip redirects command IPC-48, IPC-119
show ip rip database command IPC-209
show ip route command DC-680, DC-686, DC-704, IPC-48, IPC-373, QC-50, WC-318
show ip route dhcp command IPC-74
show ip route mobile command IPC-170
show ip route profile command XC-44
show ip route summary command IPC-48, IPC-373
show ip route supernets-only command IPC-373
show ip rpf command IPC-441
show ip rsvp atm-peak-rate-limit command QC-297
show ip rsvp command QC-297
show ip rsvp installed command QC-269, QC-278
show ip rsvp interface command QC-269, QC-297
show ip rsvp neighbor command QC-269
show ip rsvp policy command QC-305
show ip rsvp policy cops command QC-305
show ip rsvp request command QC-269
show ip rsvp reservation command QC-269
show ip rsvp sbm command QC-309
show ip rsvp sender command QC-269
show ip rtp header-compression command IPC-441, QC-339
show ip sap command IPC-441
show ip socket command DC-174
show ip sockets command IPC-119
show ip tcp header-compression command IPC-119
show ip traffic command IPC-119
show ipx access-list command DC-704, DC-732
show ipx accounting command P2C-157
show ipx cache command P2C-154
show ipx eigrp interfaces command P2C-155
show ipx eigrp neighbors command P2C-155
show ipx eigrp topology command P2C-155
show ipx interface command DC-379, DC-410, DC-437, DC-704, P2C-154
show ipx nlsp database command P2C-156
show ipx nlsp neighbors command P2C-156
show ipx nlsp spf-log command P2C-156
show ipx route command DC-704, P2C-154, P2C-155
show ipx servers command DC-704, P2C-154
show ipx traffic command P2C-154, P2C-155
show isdn command DC-196, DC-276, DC-277, DC-319, DC-341
show isdn nfas group command DC-323
show isdn service command DC-323
show isis database command IPC-285, P3C-97
show isis routes command IPC-285, P3C-97
show isis spf-log command IPC-285, P3C-97
show isis topology command IPC-285, P3C-97
show key chain command IPC-373
show l2relay statistics command MWC-53
show lane bus command XC-392
show lane client command XC-392
show lane command XC-392, XC-393, XC-446
show lane config command XC-393
show lane database command XC-393
show lane default-atm-addresses command XC-379, XC-393
show lane le-arp command XC-393
show lane server command XC-393
show lat services command TC-34
show line async-queue command DC-149
show line command DC-41, DC-128, DC-149, TC-145
show llc2 command BC-397, BC-426, WC-319
show lnm bridge command BC-107, BC-121
show lnm config command BC-107, BC-121
show lnm interface command BC-107, BC-121
show lnm ring command BC-107, BC-121
show lnm station command BC-107, BC-121
show local-ack command BC-121, BC-265, BC-426
show logging command FC-289, FC-293
show mgcp command, in MGCP VC-189
show microcode command FC-179, FC-208
show mls rp ip multicast command XC-283
show mls rp ipx command XC-295, XC-296
show mls rp vtp-domain XC-296
show modem call-stats command DC-89
show modem command DC-101
show modem connect-speeds command DC-101
show mpoa client cache command XC-447
show mpoa client command XC-447
show mpoa client statistics command XC-447
show mpoa default-atm-addresses command XC-447, XC-454
show mpoa server cache command XC-454
show mpoa server command XC-454
show mpoa server statistics command XC-454
show ncia circuits command BC-486
show ncia client command BC-486
show ncia server command BC-486
show netbios-cache command BC-121
show network-clocks command VC-798, WC-97
show ntp associations command FC-277
show ntp status command FC-277
show parser statistics command FC-166
show pas caim stats command IC-97
show policy class command QC-230
show policy command QC-230, QC-239
show policy interface command QC-135, QC-230
show policy-map class command QC-124
show policy-map command
class-based packet marking QC-66
DCBWFQ QC-126
DWRED QC-189
LLQ burst size QC-140
NBAR QC-75
policy maps QC-124
traffic
classes QC-406
policing QC-221
show policy-map interface command
class-based packet marking QC-66
DCBWFQ QC-126
DSCP value, configuration, verifying QC-192
DWRED QC-189
LLQ
burst size, verifying QC-140
monitoring QC-133
NBAR QC-75
policy maps QC-124
traffic
classes QC-406
show port config command DC-131
show port digital log command DC-131
show port modem log command DC-132
show port modem test command DC-132
show port operational-status command DC-132
show pots csm command VC-866
show pots status command, VC-53
show ppp bap group command DC-668
show ppp bap queues command DC-668
show ppp multilink QC-323
show ppp multilink command DC-635, DC-668
show process cpu command DC-600, DC-601, IC-89, IC-90, WC-261
show queue command
CQ lists, monitoring QC-161
fair queueing, monitoring QC-115
Frame Relay IP RTP Priority, verifying QC-129
LLQ, monitoring QC-133
policy maps and classes, verifying configuration QC-124
PQ lists, monitoring QC-167
WRED and DWRED, monitoring QC-187
show queueing command
CQ lists, monitoring QC-161
fair queueing, monitoring QC-115
PQ lists, monitoring QC-167
WRED and DWRED, monitoring QC-187
WRED parameters, displaying QC-356
show queueing interface command
DSCP value configuration, verifying QC-192
per-VC hold queue, verifying configuration QC-141
per-VC WFQ and CBWFQ, monitoring QC-365
queueing statistics, displaying QC-356
WRED and DWRED, monitoring QC-187
show rcapi status command DC-256
show redundancy command DC-115
show reload command FC-235
show resource-pool call command DC-753
show resource-pool customer command DC-746, DC-753
show resource-pool discriminator command DC-754
show resource-pool resource command DC-754
show resource-pool vpdn group command DC-750
show resource-pool vpdn profile command DC-750
show rmon commands
(list) FC-4
show route-map command IPC-373, P3C-97
show route-map ipc command IPC-370, XC-76
show rtr commands
(list) FC-352
show run VC-780
show run command DC-96
show run command, in MGCP VC-189
show running-config command BC-631, DC-214, DC-755, FC-151, VC-262
show running-configuration command MWC-49
show sgbp command DC-635
show sgbp queries command DC-635
show smds addresses command WC-253
show smds map command WC-253
show smds traffic command WC-253
show smrp forward command P2C-55
show smrp globals command P2C-56
show smrp group command P2C-56
show smrp mcache command P2C-56
show smrp neighbor command P2C-56
show smrp port command P2C-56
show smrp route command P2C-56
show smrp traffic command P2C-56
show sna command BC-531
show snapshot command DC-448
show snasw class-of-service command BC-551
show snasw connection-network command BC-551
show snasw directory command BC-551
show snasw dlctrace command BC-551
show snasw dlus command BC-551
show snasw ipstrace command BC-551
show snasw link command BC-551
show snasw lu command BC-551
show snasw mode command BC-551
show snasw node command BC-551
show snasw pdlog command BC-551
show snasw port command BC-551
show snasw pu command BC-551
show snasw rtp command BC-551
show snasw summary-ipstrace command BC-551
show snmp command FC-316, FC-320
show snmp pending command FC-320
show snmp sessions command FC-320
show sntp command FC-273, FC-277
show source-bridge command BC-121
show span command BC-59
show spe command DC-131
show spe digital active command DC-132
show spe digital command DC-132
show spe digital csr command DC-132
show spe digital disconnect-reason command DC-132
show spe digital summary command DC-132
show spe log command DC-131
show spe modem active command DC-115, DC-116, DC-133
show spe modem command DC-134
show spe modem csr command DC-133
show spe modem disconnect-reason command DC-133
show spe modem speed command DC-134
show spe version command DC-131
show srp topology command IC-130
show sscop command WC-97
show sse summary command BC-59, BC-121, P2C-154
show stacks command FC-445
show standby command IPC-119
show standby delay command IPC-119
show startup-config command FC-151, FC-229
show stun command BC-348
show tarp blacklisted-adjacencies command P3C-103
show tarp command P3C-103
show tarp host command P3C-103
show tarp interface command P3C-103
show tarp ldb command P3C-103
show tarp map command P3C-103
show tarp static-adjacencies command P3C-103
show tarp tid-cache command P3C-103
show tarp traffic command P3C-103
show tcp brief command TC-20
show tcp command TC-20
show tcp intercept connections command SC-217
show tcp intercept statistics command SC-217
show tcp statistics command IPC-119
show terminal command FC-92
show tn3270 character-map command TC-46
show traffic-shape command QC-225
show traffic-shape queue command QC-129
show traffic-shape statistics command QC-225
show txconn connection command BC-598
show txconn destination command BC-598
show txconn license command BC-598, BC-599
show txconn route command BC-598
show txconn server command BC-598
show txconn statistics command BC-598
show txconn transaction command BC-598
show users command TC-145
show vc-group command WC-240
show version command BC-636, BC-688, BC-704, DC-108, FC-179, FC-229, FC-445
show vfc command VC-871, VC-872, VC-874
show vines access command P3C-26
show vines cache command P3C-26
show vines host command P3C-26
show vines interface command P3C-26
show vines ipc command P3C-26
show vines neighbors command P3C-26
show vines route command P3C-26
show vines services command P3C-26
show vines traffic command DC-380, DC-410, DC-437, P3C-26
show vlans command BC-59, BC-153, XC-338, XC-351, XC-358
show voice busyout command VC-563
show voice call command VC-440
show voice call summary command VC-99
(examples) VC-106
show voice dsp command VC-46, VC-64, VC-99, VC-105, VC-440, VC-443
show voice port command VC-440, VC-443, VC-560
(examples) VC-100
show voice port summary command VC-59, VC-98
(examples) VC-100
show vpdn command DC-546, WC-135
show vpdn multilink command DC-751
show vpdn tunnel command DC-546
show x25 interface command WC-319
show x25 map command WC-319
show x25 pad command TC-97
show x25 remote-red command WC-319
show x25 route command WC-300, WC-319
show x25 services command WC-319
show x25 vc command WC-292, WC-319
show x25 xot command WC-319
show xns cache command P3C-132
show xns interface command P3C-132
show xns route command P3C-132
show xns traffic command DC-380, DC-410, DC-437, P3C-132
show xremote command TC-53, TC-59
show xremote line command TC-53, TC-59
shutdown (hub) command IC-58
shutdown (TN3270) command BC-829
shutdown command BC-638, DC-486, IC-68, VC-306, WC-19, WC-122
shut down router BC-627, BC-629
siftdown commands
configuration modes (table) BC-794
TN3270 server configuration BC-793to BC-794
signal command VC-48, VC-818, VC-842
signaling
channel-associated analog calls DC-262
defined QC-243
differentiated QoS QC-243
E1 R2
configuration (example) DC-312
configuring DC-289
countries supported DC-287
country settings DC-289
overview DC-286
parameters DC-289
sample topology DC-287
troubleshooting DC-292
guaranteed QoS QC-243
R1 modified DC-293
R2 DC-289
encoding options DC-295, DC-296
framing options DC-295, DC-296
robbed-bit DC-262
RSVP QC-244
RSVP-ATM QoS Interworking feature QC-249
SBM QC-258
summary QC-14
signaling attributes, trunk conditioning
(example) VC-565
configuring VC-540
overview VC-535
signaling interfaces
See E&M (receive and transmit) signaling interfaces; voice ports, signaling interfaces
signaling phase, FDDI CMT IC-56
signaling techniques
ground start VC-39
loop-start VC-39
signal keepalive command VC-541, VC-841
signal pattern command VC-541
signals
Break TC-188
X.3 action upon receipt of TC-188
break TC-189
PAD French language, configuring TC-103
Telnet
Break TC-18
Synchronize TC-18
signals, pulsing DTR IC-100
signal sequence oos command VC-541
signal timing idle suppress-voice command VC-543
signal timing oos command VC-543
signal timing oos restart command VC-543
signal timing oos slave-standby command VC-543
signal timing oos suppress-all command VC-843
signal timing oos timeout command VC-542, VC-841
signal-type command VC-398, VC-434
signatures
attack SC-269
list
See Cisco IOS Firewall IDS, signature list; RSA signatures
SIG-TS-001/1991 standard WC-251
Simple LANE Service Replication
backup servers XC-365
redundancy requirements XC-388
Simple Network Management Protocol
See SNMP
simplex circuit, definition IPC-83
simplex Ethernet circuit, configuring IPC-83
simplex Ethernet interfaces, configuring IP IPC-83
single-proxy configurations VC-215
single route, VINES P3C-24
SIP
architecture VC-367
call transfer
configuring VC-378
gateways VC-367
phones VC-367
components VC-366
UAC VC-366
user agent server VC-366
configuration examples VC-381
configuration tasks list VC-376
end point VC-366
gateway accounting
configuring VC-379
gateways VC-367
prerequisite tasks list VC-376
servers
proxy VC-368
redirect VC-368
registrar VC-368
services
authentication VC-367
billing VC-367
directory VC-367
user agent
changing configuration VC-377
VoIP dial peers
configuring VC-376
sip-server command VC-377
sip-ua command VC-377
Skeme key exchange protocol SC-378
See also IKE
SLARP (Serial Line Address Resolution Protocol)
using for AutoInstall FC-50
slave auto-sync config command FC-434
slave default-slot command FC-434
slave image command FC-444
slave reload command FC-445
slave sync config command FC-444
SLIP (Serial Line Internet Protocol)
(examples) DC-588
automatic sessions, starting DC-155
defined DC-583
drivers, IPTalk P2C-33
IP, configuring over DC-578
IP-SLIP (example) DC-46
PPP banner DC-587
(example) DC-589
tokens DC-587
PPP BOOTP requests DC-576
server connections DC-583
telecommuting configuration (example) DC-576
SLIP (Serial Line Internet Protocol), tunneling over X.25 (example) TC-170
SLIP-PPP
banner message
(example) FC-115
banner messages FC-101
banner tokens FC-99
SMDS (Switched Multimegabit Data Service)
(examples) WC-253
address
mapping WC-245
resolution (ARP) WC-247
specifying WC-245
AppleTalk
address mapping WC-246
configuring WC-250
extended network (example) WC-255
fast switching WC-252
nonextended network (example) WC-255
ARP
address mapping WC-246
configuring WC-249
ATM, configuring WC-53
bridging WC-250
address mapping WC-246
broadcast ARP messages WC-247
configuring WC-244
customizing WC-248
DECnet
address mapping WC-247
configuring WC-249
disabled split horizon IPC-207, IPC-219
DXI 3.2 with heartbeat WC-14, WC-251
dynamic routing table WC-14, WC-248
E.164 addresses WC-54
enabling WC-245
encapsulation WC-245
fast switching
configuring WC-252
transparent bridging WC-250
fast switching, IPX P2C-120
hardware requirements WC-243
IP
address mapping WC-247
configuring WC-249
pseudobroadcasting WC-252
IP split horizon WC-14
IPX
address mapping WC-247
configuring WC-249
dynamic address mapping WC-248
dynamic address mapping (example) WC-254
fast switching WC-252
ISO CLNS
address mapping WC-247
configuring WC-249
monitoring activity WC-253
monitoring connection WC-253
multicast address map WC-246
multiple logical IP subnetwork
(example) WC-255
multiprotocol configuration (example) WC-253
network connection WC-14
protocols supported WC-14
pseudobroadcasting WC-252
(example) WC-257
remote peer configuration (example) WC-254
required protocol multicasts (table) WC-249
SDSU equipment WC-14
standards, defining WC-14
static map entries WC-246
static routing table WC-14
subinterfaces, multiple logical IP subnetworks (LIS) WC-251
transparent bridging WC-14
VINES
address mapping WC-246
configuring WC-250
XNS
address mapping WC-247
configuring WC-249
SMDS (Switched Multimegabit Data Service), LAT-to-LAT protocol translation (example) TC-158
SMDS (Switched Multimegabit Data Service), transparent bridging fast switching configuration BC-36
SMDS (Switch Multimegabit Data Service)
fast switching
AppleTalk XC-15
configuring XC-15
IP XC-15
IPX XC-15
smds address command WC-245, WC-251
smds dxi command WC-252
smds enable-arp command WC-247, WC-248, WC-251
smds glean command WC-248
smds multicast arp command WC-248
smds multicast bridge command BC-36, WC-250
smds multicast command WC-246, WC-251
smds static-map command WC-246
smds static-map ip command WC-252
SMRP (Simple Multicast Routing Protocol)
fast switching cache table P2C-56
traffic table P2C-56
smrp mroute-cache protocol appletalk command P2C-38
SMT (Station Management), message queue size, setting IC-57
SMTP attacks
CBAC error messages SC-248
CBAC intrusion detection SC-221
smt-queue-threshold command IC-57
SMT Version 7.3 IC-50
SNA (Systems Network Architecture)
environments
FRAS BC-223
internetworking overview BC-7
IP integration BC-1
local LU address priority BC-264
router connectivity verification BC-590
traffic priority, setting LU address BC-263
transmission group configuration BC-338
sna enable-host command BC-527
sna host (Frame Relay) command BC-527
sna host (QLLC) command BC-527
sna host (SDLC) command BC-526
sna host command BC-526
SNAP FC-327
SNAP (Subnetwork Access Protocol) filters
configuration BC-112
output (example) BC-138
SNAP, Ethernet protocols over 802.2 media IC-34
snapshot client command DC-447, DC-449
snapshot routing DC-445to DC-449
client router, configuring DC-447
interface diagnostics DC-448
monitoring DC-448
overview DC-445
periods
active DC-446
quiet DC-446
quiet periods, stopping DC-448
routed protocols supported DC-446
routing information exchange DC-445
server configuration (example) DC-449
server router, configuring DC-448
snapshot server command DC-448
sna rsrb command BC-528
sna rsrb enable-host command BC-528
sna rsrb start command BC-528
SNA Service Point
configuration tasks BC-526
data-link control configuration BC-527
Frame Relay support BC-530
local SAP
RSRB, enabling BC-528
Token Ring or Ethernet, enabling BC-527
virtual data-link control, enabling BC-529
maintaining BC-531
monitoring BC-531
remote host connection configuration BC-528, BC-530
RSRB
configuration BC-528
interface, defining BC-528
local acknowledgment configuration BC-528
SDLC support BC-530
Service Point/RSRB interface, defining BC-528
Token Ring configuration BC-527
virtual data-link control
configuration BC-529
configuration (example) BC-537
interface, defining BC-529
X.25 support BC-530
sna start command BC-528
SNASw (SNA Switching Services)
benefits
architectural compliance BC-233, BC-546
improved availability BC-546
increased management BC-233, BC-546
IP infrastructure BC-233, BC-545
network design simplicity BC-233, BC-546
reduced configuration requirements BC-233, BC-546
scalable APPN networks BC-233, BC-545
BEX BC-233
broadcast traffic BC-545
configuration, requirements BC-546
network nodes BC-545
SNA traffic BC-545
Branch Extender
See BEX
CIP Connection to virtual Token Ring with SRB (example) BC-555
configuration
(examples) BC-552
CMPC (examples) BC-716to BC-720, BC-724to BC-726
task list BC-546
connection types BC-238, BC-544
CP, defining BC-547
CTRC
SNA messages BC-574
DLC support configuration BC-547
downstream Frame Relay BNN support (example) BC-563
EE BC-233
SNA traffic BC-545
Enterprise Extender
See EE
Ethernet LAN emulation over ATM (example) BC-560
Frame Relay BAN support (example) BC-561
interface, changing
(caution) BC-548
link
configuration BC-549
starting BC-550
stopping BC-550
local switching with QLLC (example) BC-558
local switching with SDLC (example) BC-559
management enhancements BC-543
network nodes BC-232, BC-539, BC-540
partner LU location
configuration BC-549
defining BC-549
port
defining BC-548
starting BC-550
stopping BC-550
routing functions BC-234, BC-540
starting BC-550
stopping BC-550
technical overview BC-539
Token Ring over HPR/IP (example) BC-557
Token Ring with HPR (example) BC-554
Token Ring without HPR (example) BC-553
troubleshooting BC-551
usability features BC-542
verification BC-550
virtual data-link control BC-545
virtual Token Ring BC-544
VTAM on a remote router with DLUR using CMPC vs APPN (example) BC-567
VTAM to the CIP using CMPC vs APPN (example) BC-564
weighted fair queueing BC-541
snasw control-point command BC-547
snasw cpname command BC-589
snasw dlcfilter command BC-552
snasw dlctrace command BC-552
snasw dlus command BC-547
snasw dump command BC-552
snasw event command BC-552
snasw ipsfilter command BC-552
snasw ipstrace command BC-552
snasw link command BC-589
snasw location command BC-549
snasw pathswitch command BC-552
snasw pdlog command BC-552
snasw port command BC-548, BC-589
snasw start command BC-550
snasw start link command BC-550
snasw start port command BC-550
snasw stop command BC-550
snasw stop link command BC-550
snasw stop port command BC-550
SNA-to-IP integration
phases
(figure) BC-2
IP centric BC-4
IP client BC-4
IP transport BC-3
SNA centric BC-3
scenarios BC-5
sna vdlc command BC-529
sna vdlc enable-host command BC-529
sna vdlc start command BC-530
SNMP (Simple Network Management Protocol)
Agent
disabling FC-316
settings FC-315
alert, CPA BC-633
AppleTalk, configuring P2C-27
communities FC-313
configuration (examples) FC-320
configuration task list FC-312
controlling access to FC-313
description FC-307
Manager
description FC-319
enabling FC-319
MIBs supported FC-310
monitoring status of FC-316
notification types
authenticationFailure FC-318
linkUp, linkDown FC-318
warmStart, coldStart FC-318
RFCs supported FC-312
security models FC-311
server groups FC-314
sessions FC-319
shutdown mechanism FC-315
SNMPv1 FC-311
SNMPv2C FC-311
SNMPv3 FC-311
statistics, clearing BC-636
TFTP servers, limiting FC-316
TN3270 server, response-time collection BC-780
traps
description FC-308
sending FC-317
view records FC-313
SNMP, (Simple Network Management Protocol) traps IC-60
snmp-server chassis-id command FC-315
snmp-server community command FC-290, FC-313, P2C-27
snmp-server contact command FC-315
snmp-server enable command FC-359
snmp-server enable traps command FC-317, IPC-102, QC-268, WC-27
snmp-server enable traps ds0-busyout command DC-95
snmp-server enable traps isdn chan-not-avail VC-779
snmp-server enable traps isdn chan-not-avail command DC-95
snmp-server enable traps modem-health VC-780
snmp-server enable traps modem-health command DC-95, DC-96
snmp-server enable traps pop VC-779
snmp-server enable traps snmp command FC-318
snmp-server group command FC-314
snmp-server host command FC-317, FC-359, IPC-102
snmp-server informs command FC-318
snmp-server location command FC-315
snmp-server manager command FC-319
snmp-server manager session-timeout command FC-319
snmp-server packetsize command FC-315
snmp-server queue-length command FC-318
snmp-server system-shutdown command FC-315
snmp-server tftp-server-list command FC-316
snmp-server trap-source command FC-318
snmp-server trap-timeout command FC-318
snmp-server view command FC-313
snmp trap illegal-address command IC-60
snmp trap link-status command FC-318
SNPA (subnetwork point of attachment)
masks P3C-95
NSAP mapping P3C-85
static mapping information, entering P3C-85
X.25 network addresses P3C-93
SNTP
configuring FC-273
sntp broadcast client command FC-273
sntp server command FC-273
soft reset (BGP) IPC-291, IPC-292
software clock
description FC-264
software compression
HDLC IC-90
LAPB IC-90
software compression, for LAPB WC-261
software flow control
changing for a session FC-86
software images
See system images FC-177
software upgrades
run-from-Flash systems FC-215
SONET PLIM, configuring WC-50
source-address command IC-59
source address, administrative filtering BC-113
source-bridge command BC-86, BC-255, BC-684, BC-700
source-bridge connection-timeout command BC-117
source-bridge cos-enable command BC-264
source-bridge enable-80d5 command BC-97
source-bridge explorer-dup-ARE-filter command BC-119
source-bridge explorer-fastswitch command BC-119
source-bridge explorer-maxrate command BC-119
source-bridge explorerq-depth command BC-119
source-bridge fst-peername command BC-256, BC-422, BC-423
source-bridge input-address-list command BC-113
source-bridge input-lsap-list command BC-112
source-bridge input-type-list command BC-112
source-bridge keepalive command BC-255, BC-257, BC-258
source-bridge largest-frame command BC-265
source-bridge max-hops command BC-92
source-bridge max-in-hops command BC-92
source-bridge max-out-hops command BC-92
source-bridge output-address-list command BC-113
source-bridge output-lsap-list command BC-112
source-bridge output-type-list command BC-112
source-bridge passthrough command BC-261
source-bridge proxy-explorer command BC-119
source-bridge proxy-netbios-only command BC-99
source-bridge qllc-local-ack command BC-429
source-bridge remote-peer command BC-256, BC-261, BC-424
source-bridge remote-peer fst command BC-256
source-bridge remote-peer fst-peername command BC-423
source-bridge remote-peer interface command BC-255
source-bridge remote-peer tcp command BC-423, BC-485, BC-520
source-bridge ring-group command BC-88, BC-292, BC-423
source-bridge route-cache cbus command BC-89, BC-117
source-bridge route-cache command BC-116
source-bridge route-cache sse command BC-117
source-bridge sap-80d5 command BC-98
source-bridge sdllc-local-ack command BC-424
source-bridge spanning command BC-91, BC-92, BC-153, BC-179
source-bridge tcp-queue-max number command BC-121, BC-265
source-bridge transparent command BC-96, BC-179
source-bridge transparent fastswitch command BC-94, BC-97
source-bridge trcrf-vlan command BC-178, BC-179
source call signal address VC-212
software restrictions VC-236
source IP address of gateway
verifying VC-279
source-route bridging
Token Ring IC-71
source-route autonomous-switching cache, enabling BC-117
source-route fast-switching cache, disabling BC-116
source-route transparent bridging
TR-LANE support XC-373
source template command DC-720, DC-746
Spanning Tree Protocol enhancement BC-27
spanning trees
automatic resolution in SRB BC-91
bridging and routing IP BC-41
interface
assigning BC-28
disabling BC-52
priority, setting BC-50
intervals
forward delay BC-51
hello BPDU BC-51
idle BC-52
known topology, displaying BC-59
multiple domains, establishing BC-35, BC-42
path cost, assigning BC-51
priority, setting BC-50
root bridge BC-50
topology configuration BC-90
VLAN transparent bridging BC-30
spare sectors
PCMCIA Flash memory cards FC-219
SPE (Service Processing Element)
country code DC-122
digital statistics DC-132
download maintenance DC-130
firmware DC-57, DC-118, DC-123
country name, specifying DC-122
firmware statistics DC-131
lines and ports
configuring DC-126
verifying DC-128
log events DC-129
modem statistics DC-133
performance statistics
configuring DC-128
viewing DC-131
port statistics DC-131
reboot DC-125
recovery DC-130
shutdown DC-125
troubleshooting DC-129
verifying DC-128
spe call-record modem command DC-128
special-character-bits command FC-82
special characters
regular expression meaning, removing DC-864
spe country command DC-59
speed, Fast Ethernet interface IC-35
speed command TC-12
terminal form FC-87
speeds
changing terminal line speed FC-87
modem, verifying DC-101
spe log-event-size command DC-128
SPF computation XC-90
spf-interval command IPC-284, P2C-100
SPI (security parameter index) SC-336
split horizon
AppleTalk Enhanced IGRP P2C-48
DECnet P3C-53
effect of, on SMDS WC-14
EIGRP (Enhanced IGRP) IPC-267
enabling and disabling IPC-207, IPC-219
IPX Enhanced IGRP P2C-90
ISO IGRP, enabling P3C-72
subinterfaces WC-189
using with IP route summarization IPC-204
X.25 WC-278
spoofing XC-98
IPX P2C-121
SPX keepalive packets over DDR P2C-121
spoofing attacks
See also Reflexive Access Lists
spoofing attacks, preventing SC-202
spurious interrupts FC-299
SPX, keepalive packets, spoofing P2C-121
squeeze command FC-142
squelch normal command IC-35
squelch reduced command IC-35
SR/TLB (source-route translational bridging)
access filtering (example) BC-132
ATM BC-108
compatibility with IBM 8209 bridges BC-97
enabling BC-96
fast-switching mode, disabling BC-94, BC-97
IBM LLC2 environments BC-97
overview BC-95
routing devices and IBM 8209 bridges BC-97
simple network (example) BC-130
Token Ring LLC2-to-Ethernet conversion BC-97
SRB (source-route bridging)
administrative filtering BC-111
ATM PVCs
multiple virtual rings (example) BC-143
single virtual ring (examples) BC-142, BC-144
ATM support configuration BC-108
back-to back ATM configuration (example) BC-141
CMCC adapter configuration BC-684to BC-685, BC-700
configuration
task list BC-85
connection timeout interval, setting BC-117
dual-port bridge configuration BC-86
enabling BC-255
fast-switching SRB over FDDI BC-89
hops, limiting BC-92
interoperability BC-120
multiple virtual ring groups (example) BC-126
multiport bridge
configuration (example) BC-125
description BC-87
NetBIOS
access control BC-109
over ATM, description BC-108
over Frame Relay configuration BC-451
RIF
assigning BC-129
enabling BC-93
timeout interval BC-94
routing protocol (example) BC-124
securing BC-109
spanning tree, resolving BC-91
TR-LANE
configuration (example) XC-401, XC-403
TR-LANE support XC-373
tuning BC-116
srp ips request manual-switch command IC-130
srp ips wtr-timer command IC-130
srp topology-timer command IC-130
SRT (source-route transparent bridging)
bridging (example) BC-69
compared to SR/TLB BC-13, BC-25
configuration BC-27
hardware supporting BC-13, BC-25
SRTP (Sequenced Routing Update Protocol)
starting P3C-17
SS7 calls, MGCP support of VC-182
SSCOP (Service-Specific Connection-Oriented Protocol)
connection control timer, configuring WC-38
description WC-37
keepalive timer, configuring WC-38
poll timer, configuring WC-38
receiver windows, configuring WC-39
transmitter windows, configuring WC-39
sscop cc-timer command WC-38
sscop keepalive-timer command WC-38
sscop max-cc command WC-38
sscop poll-timer command WC-38
sscop receive-window command WC-39
sscop send-window command WC-39
SSE fast switching
SRB BC-117
SSH (Secure Shell Version 1) SC-5
client
DES and 3DES support SC-450
description SC-450
examples (See ssh command)
server support SC-450
configuring
prerequisites SC-451
troubleshooting SC-454
verifying SC-453
maintaining SC-454
monitoring SC-454
prerequisites SC-451
restrictions SC-450
server SC-450
troubleshooting SC-454
verifying SC-453
SSI (server side includes)
ECHO command
(example) FC-128
displaying FC-125
EXEC command
(example) FC-127
displaying FC-125
international HTML pages, customizing FC-125
variables FC-124
viewing in HTML files FC-126
SSL encryptions, TN3270 server
(examples) BC-843
configuration BC-804
description BC-781
verification BC-824
SSM (Source Specific Multicast)
See IP multicast routing, SSM IPC-453
SSP (Silicon Switch Processor)
statistics summary P2C-154
SSRP (Simple Server Redundancy Protocol), configuring XC-379
Stacker compressor IC-90, WC-261
stack groups
large-scale dial-out DC-677
MMP DC-632
PRI hunt groups DC-632
standard access lists
See access lists, IPX
standard NACL configuration mode, summary FC-412
standards
IKE, supported by SC-378
standby authentication command BC-150, IPC-101, XC-330
standby command BC-149
standby delay minimum reload command IPC-101
standby ip command BC-149, IPC-100, XC-329
standby mac-address command IPC-101
standby mac-refresh command IPC-102
standby preempt command BC-150, IPC-101, XC-329
standby priority command BC-150, IPC-101, XC-329
standby redirects command IPC-107
standby router or access server, displaying status IPC-119
standby timers command BC-150, IPC-101, XC-329
standby track command BC-150, IPC-101, XC-330
start character
changing flow control FC-86
changing for session FC-86
startup
configuration file FC-225
corrupted FC-68
system image FC-226
startup configuration
clearing FC-170
copying configuration files to FC-157
copying from an rcp server
copying to an rcp server (example) FC-155, FC-157
loading from the network FC-164
rcp server, copying from
(example) FC-162
reexecuting configuration commands in FC-170
specifying FC-171
stateless backup, summary IPC-145
state machine
configuring FC-85
description FC-85
state-machine command FC-86
state-tracks-signal command BC-633, BC-637
static maps, ATM, displaying QC-362
static maps list configuration mode
summary FC-413
static RIF entries, configuring BC-94
static route PE to CE routing sessions, configuring XC-157
static routes
Apollo Domain P3C-10
GGSN
(example) MWC-56
configuring MWC-26
IP
configuring IPC-358
redistribution (example) IPC-376
ISO CLNS P3C-68
(example) P3C-113
interdomain (example) P3C-114
intradomain (example) P3C-113
source NET, controlling P3C-83
static routing (table) P3C-67
table entries P3C-67
redistributing IPC-361
VINES P3C-24
XNS P3C-128
static routes, SMDS WC-246, WC-248
station configurations, displaying LLC2 BC-397
station name command VC-820
station names, NetBIOS access control BC-110
station number command VC-821
statistical counters, in MGCP VC-189
statistics
NetFlow accounting XC-72
statistics-distribution-interval command FC-347
sticky command IPC-144
stop bits
changing the number FC-87
stop bits, configuring TC-12
stopbits command TC-12
stop character
changing flow control FC-86
changing for session FC-86
Store and Forward Fax
configuration
off-ramp gateway VC-669
faxed cover page information 1
transmitting subscriber number 1
on-ramp gateway
on-ramp MMoIP dial peers 1
on-ramp security VC-672
reconfiguring mail transfer agents VC-680
SMTP server VC-680
configuration examples
on-ramp gateway VC-709
delivery status notification VC-674
handling of enclosures VC-676
prerequisites VC-679
verification
DSN VC-703
MDN VC-702
off-ramp gateway VC-698
on-ramp gateway VC-694
on-ramp security VC-701
store and forward fax
attribute-value pairs VC-672
stratum, NTP FC-265
streamlined setup facility
See Setup
stream TCP connections TC-24
strict priority queueing QC-10, QC-93, QC-97
structured CES
on the ATM-CES port adapter WC-84, WC-88
channel-associated signalling WC-90
on the CES network module WC-88
channel-associated signalling WC-85
structured CES clock, configuring VC-756
stub area
See OSPF
stub routing
EIGRP
benefits IPC-271
configuration tasks IPC-272
configuring IPC-268
overview IPC-268
restrictions IPC-271
verifying IPC-272
ODR
definition IPC-195
enabling IPC-196
STUN (Serial Tunnel)
asynchronous protocol virtual multidrop support BC-362
custom protocol configuration BC-338
encapsulation
(caution) BC-340
features BC-212
HDLC
encapsulating BC-341
encapsulating (example) BC-349
line-sharing device (example) BC-353
LOCADDR priority group (example) BC-357
local acknowledgment
Frame Relay (example) BC-355
Frame Relay configuration BC-345
SDLC (example) BC-354
modes
local acknowledgment BC-211
passthrough BC-211
monitoring BC-348
multipoint (example) BC-353
network overview BC-211
protocol group
basic BC-337
configuration BC-337
SDLC BC-338
queueing priority configuration
all traffic BC-348
LU address BC-347
serial interface address BC-346
TCP port BC-346
SDLC
address configuration BC-337
broadcast (example) BC-350
broadcast, configuration BC-340
broadcast, enabling BC-340
multilink transmission group, configuration BC-345
multilink transmission group, design BC-345
primary node BC-343
secondary node BC-343
TCP encapsulation, configuration BC-342
traffic queueing priority
(examples) BC-351, BC-355, BC-357
transmission group, configuration BC-345
stun group command BC-340
stun peer-name command BC-336
stun protocol-group command BC-338
stun protocol-group schema command BC-338
stun route address command BC-344
stun route address interface dlci command BC-345
stun route address tcp command BC-337, BC-342
stun route all tcp command BC-342
stun schema command BC-338
stutter dial tone, MGCP support of VC-182
subaddress, X.25 WC-275
subautonomous systems
communicating between XC-112
PE router addresses, distributing XC-164
subinterface configuration mode
description FC-15
summary FC-18
subinterfaces
configuration (examples) WC-209to WC-211
configuring FC-15
configuring SVCs on WC-166
defined P2C-83
Frame Relay
addressing WC-190
configuring WC-194
IPX P2C-95
configuration (example) P2C-157
shutting down (example) P2C-158
multipoint dynamic addresses WC-191
NLSP P2C-95
configuration (example) P2C-157
shutting down (example) P2C-158
point-to-point WC-190
SMDS, multipoint WC-251
X.25
(example) WC-325
configuring WC-277
deleting and reestablishing WC-278
multipoint WC-277
point-to-point WC-277
subinterface with a bridge group, associating WC-193
subnets
displaying number using masks IPC-48
in OSPF network (figure) IPC-247, IPC-381
IP
defining XC-329
IP, creating network from separated, (example) IPC-50
use of subnet zero, enabling IPC-9
variable length subnet masks
definition IPC-358
subnets, discontinuous
connecting, tunneling IC-175
subnetwork number, VINES P3C-16
subscription-required command MWC-29
summary-address (OSPF) command IPC-231
summary-address command IPC-281
summary addresses
aggregate IPC-263
entries, checking for IPC-206
summer time
configuring FC-274
supervisory disconnect anytone command VC-88
supervisory disconnect dualtone command VC-88
supported-prefix command VC-329
svc nsap command WC-32, WC-34, WC-35
SVCs (switched virtual circuits)
ATM
broadcast packets, configuring WC-37
call setup, configuring WC-29
configuring (example) WC-101, WC-103
disabling WC-39
traffic parameters, configuring WC-34
traffic shaping, configuring WC-36
VC classes, configuring WC-37
creating for RSVP reservations QC-294
peak rate limit, setting QC-296
RSVP-ATM reservations QC-249
under a specified map list, displaying WC-207
X.25
switching between PVCs and SVCs WC-292
switched 56K
analog calls DC-283
benefits DC-282
BRI bearer capability DC-284
call processing components DC-284
configuring DC-285
ISDN BRI traffic DC-285
overview DC-283
prerequisites DC-282
switched 56K over CT1 RBS
56K and modem calls (example) DC-305
call processing components DC-284
configuration (example) DC-305
description DC-284
ISDN BRI solution DC-285
prerequisites DC-282
restrictions DC-282
sample topology DC-283
startup configuration (example) DC-306
T1 CAS line provisioning DC-306
switching
fast XC-8
description XC-5
ISL VLAN traffic XC-334
next-hop destination XC-6
next-hop determination XC-7
overview XC-5
priorities, changing FC-280
processes XC-5, XC-6, XC-7, XC-8
route caching XC-5
system process scheduler FC-280
enabling XC-335
X.25 local WC-15
See also Frame Relay, switching
switching decisions by BGP routing table IPC-294
switching paths, IPSec supported SC-337
switch redundancy XC-124
switch types
ISDN BRI (table) DC-185
ISDN NFAS DC-320
ISDN PRI (table) DC-265
North American ISDN DC-180, DC-263
voice systems DC-184
Symmetricom FC-272
synchronization, BGP
disabling IPC-294
figure IPC-332
synchronization command IPC-294
synchronized clocking
overview VC-793
synchronizing
unsolicited messages FC-290
synchronous serial interface
encapsulation methods IC-87
overview IC-86
synguard command IPC-144
syntax checking
See context-sensitive help
SYSIBM.LUNAMES (table) BC-585
SYSIBM.SYSLUNAMES (table) BC-585
syslog records
AAA accounting VC-259
system
name, setting FC-260
system calendar FC-275
See hardware clock
system clock
See software clock
setting from calendar FC-276
setting manually FC-275
System Configuration Dialog
See Setup FC-62
system controller poll-group configuration mode
summary FC-413
system generation parameters, SDLLC configuration BC-442
system ID
ISO GRP P3C-68
ISO IGRP P3C-64
NSAPs, Level 1 routing P3C-64
area addresses P3C-65
system images
copying from
PCMCIA Flash memory card to an rcp server (example) FC-182
server using rcp FC-190
server using rcp (example) FC-191
server using Xmodem FC-202
server using Ymodem FC-202
copying to
Flash contains named file (example) FC-189
Flash when Flash is full (example) FC-188
rcp server from Flash memory (example) FC-182
copying to a server FC-180
description FC-177
displaying information FC-179
fault-tolerant booting strategy FC-201
Flash checksum, verifying FC-194
Flash devices
copying between FC-194
Flash memory
space considerations FC-186
loading FC-229
loading on line cards FC-209
MOP server
copying from
(examples) 1
naming conventions FC-178
network servers, loading from FC-197
rcp server
copying from
(examples) 1
copying to FC-181
rcp server, copying from FC-190
recovering
using Xmodem FC-202
using Ymodem FC-202
startup image
loading from Flash FC-197
loading from network server FC-199
loading from ROM FC-201
TFTP server
copying from FC-185
(examples) 1
copying to
(examples) 1
types of FC-177
verifying
(example) FC-194
system information
displaying FC-286
system initialization table BC-580
system messages
warnings FC-305
system processes
priorities, changing FC-280
system routing
IS-IS P3C-68
ISO IGRP P3C-68
system software
showing the current running version FC-229
T
t.37/t.38 fax gateway
adding codecs VC-689
adding files to default list VC-689
configuration tasks
configuring IVR VC-705
interfact type VC-705
configuring IVR VC-690
copying flash files to vfc VC-687
deleting files from vfc flash VC-690
determine number of vfcs VC-685
download in rom monitor mode VC-687
download in vcware mode VC-686
erasing vfc flash memory VC-690
identify vfc mode VC-686
unbundling vcware VC-688
T.38 Fax Relay for VoIP H.323 VC-678
configuring
dial-peer VC-708
global VC-707
T1
CSU WIC IC-138
digital packet voice trunk network module VC-59
shutdown
T1 line IC-154
voice port configuration VC-66
See also T3
T1/E1 controller loop-time
clocking back to network source
configuring VC-800
T1/E1 line termination IC-117
T1/fractional T1 service modules
Cisco 2524 IC-134
Cisco 2525 IC-134
t1 bert pattern command IC-116
T1 cable length, configuring
description IC-117
t1 clock source command IC-107
T1 controllers
channelized controller configuration (example) IC-173
t1 external command IC-109
t1 fdl ansi command IC-115
t1 framing command IC-107
t1 linecode command IC-107
t1 test command IC-110
T1 timer, LLC2 local acknowledgment BC-258
t1 timeslot command IC-107
T1 voice channels, configuring DC-281
t1 yellow command IC-107
T3
BERT pattern IC-116
cable length IC-106
clock source IC-106
configuring IC-105
external port (example) IC-151
external T1 channels IC-108
FDL
loopbacks IC-117
support IC-115
framing IC-106
loopbacks IC-113
MDL messages IC-115
monitoring IC-114
performance report IC-115
performance report monitoring IC-115
protocols supported IC-103
standards IC-104
T1
clock source IC-107
configuration IC-106
framing IC-107
line code IC-107
test port IC-110
troubleshooting IC-109
T3 controllers, MLP configuration (example) DC-631
Tab key
command completion FC-19, FC-25
table-map command IPC-317, QC-48, QC-50
TACACS
ARA protocol authentication TC-73
AV pairs DC-700
CCL scripts
modified and unmodified TC-74
logging in to system FC-94
security, configuring TC-73
servers DC-696
specifying a host FC-94
(example) FC-94
user authentication
configuration (example) TC-86
configuring TC-73
user ID TC-13
TACACS+
accounting SC-148
attribute-value pairs
See AV pairs
authentication
login SC-28, SC-31, SC-35, SC-38
NASI SC-38
authorization SC-147
AV pairs SC-148, SC-501to SC-510
accounting SC-510
configuring
authentication SC-147
authentication key SC-145
DNIS, server group selection SC-146
server groups SC-145
DNIS selection 1
server host SC-144
login input time, configuring SC-39
operation SC-142
overview SC-141
server groups SC-145
DNIS selection SC-146
tacacs-server host command DC-679
tacacs-server key command DC-679
tag command FC-345, FC-354, FC-356
tag-switching atm disable-headend-vc command XC-142
tag-switching atm vp-tunnel command XC-121
tail drops, defined QC-171
tailend LVC XC-141
tail -end nodes XC-91
Taiwan, ISDN Sending Complete information element DC-193, DC-272
target identifier
See TARP, TID
TARP (Target Identifier Address Resolution Protocol)
address mapping P3C-99
adjacencies P3C-100
configuration (examples) P3C-117
configuration task list P3C-98
configuring P3C-97
maintaining P3C-102
NSAP addresses
determining P3C-101
multiple P3C-100
N-selector P3C-97, P3C-99, P3C-101, P3C-102
protocol type P3C-102
enabling P3C-99
PDU
propagation 1
types 1
TID
configuring 1
definition 1
determining 1
timers, configuring P3C-101
sequence number P3C-102
update remote cache bit P3C-102
tarp allow-caching command P3C-99
tarp arp-request-timer command P3C-102
tarp blacklist-adjacency command P3C-101
tarp cache-timer command P3C-102
tarp command P3C-102
tarp enable command P3C-99
tarp global-propagate command P3C-100
tarp ldb-timer command P3C-102
tarp lifetime command P3C-102
tarp map command P3C-100
tarp originate command P3C-100
tarp post-t2-response-timer command P3C-102
tarp propagate command P3C-100
tarp query command P3C-101
tarp resolve command P3C-101
tarp route-static command P3C-100
tarp run command P3C-99
tarp sequence-number command P3C-102
tarp t1-response-timer command P3C-101
tarp t2-response-timer command P3C-101
tarp tid command P3C-99
tarp urc command P3C-102
T-CCS (transparent common channel signaling)
configuring VC-639
T-CCS connections
troubleshooting VC-655
T-CCS cross-connect
configuring VC-642
T-CCS frame forwarding
configuring VC-645
TCL IVR scripts VC-461
TCP VC-171
connection attempt time, configuring DC-585
connections
clearing FC-96
clearing (examples) FC-114
MD5 authentication for BGP IPC-315
Path MTU Discovery, enabling IPC-111
setting connection attempt time IPC-111
encapsulation configuration BC-342
flow control VC-171
GGSN
charging gateway path MWC-22
header compression
conflicting features, disabling IPC-113
connections supported IPC-111
enabling IPC-110
See also TCP/IP, header compression
keepalive packets FC-287
local LAT translation TC-167
maximum read size IPC-113
outgoing queue size IPC-114
overview IPC-1
port configuration BC-803
protocol translations
standalone LAT to TCP (example) TC-169
to LAT via X.25 (example) TC-163
X.25 PAD (example) TC-176
RSRB configuration BC-260
selective acknowledgment IPC-112
statistics, clearing IPC-118
statistics, displaying IPC-119
stream or raw connections TC-24
timestamp IPC-113
window size IPC-113
See also TCP/IP header compression
TCP (Transmission Control Protocol) header compression
connections supported QC-342
described QC-318
TCP/IP XC-97
configuration, IBM host profiles (examples) BC-760, BC-764
environments
offload support BC-245, BC-642
header compression
configuring WC-204
Frame Relay (examples) WC-230to WC-231
header compression, configuring TC-142
header compression, disabling inherited (example) WC-231
header compression, express IPC-110, IPC-427
keepalives WC-292
offload support BC-728
overview IPC-1
services,accessing FC-261
TCP-to-PAD connections TC-179to TC-180
Telnet connections TC-19
X.25
header compression WC-283
IP datagrams over WC-289
See also HSAS
TCP/IP header compression
(example) DC-48
EXEC-level DC-161
Van Jacobsen DC-160
TCP/IP offload
configuration
guidelines BC-655
host, router correlation BC-662to BC-663
fast switching configuration BC-660
ICMP flows, disabling BC-660
IP address configuration BC-659
IP host backup configuration BC-661, BC-662
maintaining BC-663
monitoring BC-663
MTU configuration, CPA BC-660
offload alias
configuration BC-659
description BC-642
verification BC-660
subchannel
guidelines BC-656
TCP Clear Performance Optimization feature DC-158
TCP filtering
See CBAC
TCP header compression VC-166
See TCP/IP, header compression
TCP Intercept
configuring, (example) SC-217
connections, displaying SC-217
MLS
restrictions XC-269
modes SC-215
monitoring and maintaining SC-217
overview SC-213
statistics, displaying SC-217
thresholds SC-216
timeouts SC-215
tcp-port command BC-803
TCP SYN-flooding attacks
preventing SC-213
tdm-group command VC-726, VC-758
TDP (Tag Distribution Protocol)
defined XC-88
definition XC-84
establishing VCI table entries XC-87
with LSC redundancy XC-123
tech-prefix command VC-252, VC-254
TEI (terminal endpoint identifier), ISDN interfaces
configuring DC-190
(example) DC-299
configuring static DC-270
(example) DC-303
Telcom-Solutions FC-272
telecommuting, and asynchronous host roaming IC-180
telecommuting configuration (example) DC-576
telephony
audio VC-5
video VC-5
telephony services XC-97, XC-98
Telnet
addresses, suppressing FC-263
automatic rotary line queueing DC-148
Break signal TC-18
changing end-of-line characters FC-80
configuring TC-17
connection, queued request DC-148
connections TC-21
idle, handling FC-279
connections, suppressing messages TC-21
description TC-16
direct sessions
(example) DC-143
starting DC-142
stopping DC-143
verifying DC-143
idle connections FC-279
Internet addresses, configuring TC-18
interrupt characters TC-18
line speeds TC-18
monitoring TC-21
notification of pending output TC-17
refuse negotiation options TC-18
Remote Echo option FC-79, TC-18
Suppress Go Ahead option FC-79, TC-18
Synchronize signal TC-18
TCP Clear performance optimization DC-158, DC-159
telnet break-on ip command TC-17
telnet command TC-19, TC-123, TC-128
telnet refuse-negotiations command TC-17
telnet speed command TC-17
telnet sync-on-break command TC-17
telnet transparent command TC-17
termcaps, description TC-39
terminal
activation character, setting FC-76
automatic command execution DC-157
character and packet dispatch sequences, creating FC-85
character data bits TC-12
character padding, setting FC-82
communication parameters, configuring TC-11, TC-12
communication parameters, setting FC-87
device location, recording FC-88
disconnect character, setting FC-76
displaying
commands FC-74
debug messages FC-88
EXEC process DC-153
file download mode FC-80
hold character FC-76
international character set FC-81
line speed, changing FC-87
line speeds, configuring TC-12
locking access to FC-95
locking mechanism FC-86
messages
sending between FC-95
output notification FC-85
packet dispatch character FC-86
parity bit FC-87
parity bits, configuring TC-12
port parameters, configuring TC-11
port queue
retry interval FC-88
screen length, changing FC-84
services overview TC-6
sessions limits, configuring TC-14
settings
saving between sessions FC-75
specifying type FC-83
start character FC-86
TN3270-type TC-39
transport protocol, configuring preferred TC-11
type, setting FC-83
V.120 asynchronous DC-202
terminal, network mask format IPC-48
terminal databits command FC-82, FC-87, TC-12
terminal data-character-bits command FC-82
terminal dispatch-character command FC-86, TC-187
terminal download command FC-80
terminal editing command FC-29
terminal emulations
custom (example) TC-48
terminal emulations, IBM PC/3270 BC-120
terminal escape-character command FC-78
terminal exec-character-bits command FC-82
terminal flowcontrol command FC-86
terminal full-help command FC-21
terminal history size command FC-23
terminal hold-character command FC-78
terminal keymap-type command FC-83
terminal lat out-group command TC-33
terminal length command FC-84
terminal monitor command FC-88, FC-289, FC-292, FC-300
terminal no editing command FC-29
terminal notify command FC-85
terminal padding command FC-83
terminal parity command FC-87, TC-12
terminal-queue entry-retry-interval command FC-88
terminal rxspeed command FC-87, TC-12
terminal special-character-bits command FC-82
terminal speed command FC-87, TC-12
terminal start-character command FC-86
terminal stopbits command FC-87, TC-12
terminal stop-character command FC-86
terminal telnet break-on-ip command FC-78
terminal telnet refuse-negotiations command FC-79
terminal telnet speed command FC-79
terminal telnet sync-on-break command FC-80
terminal telnet transparent command FC-80
terminal terminal-type command FC-83
terminal transport preferred command TC-11
terminal txspeed command FC-87
terminal-type command FC-83, TC-45
terminal width command FC-84
terminate-from command DC-535
term ip netmask-format command IPC-48
TERMSELF RU, LU termination BC-779
test appletalk command P2C-56
testing line cards FC-294
test modem back-to-back command DC-86
test port modem back-to-back command DC-129
test voice port command VC-111, VC-115, VC-116
test voice port switch fax command VC-115
Texas Instruments Token Ring MAC firmware problem BC-120
TFTP server
booting automatically from FC-199
client router, configuring FC-246
configuration files
copying from FC-158
copying to FC-153
downloading FC-175
configuring a router as FC-244
(example) FC-245
Flash memory, using as FC-244
images
copying from FC-188
copying to (example) FC-180, FC-184
PCMCIA Flash memory card (example) FC-184
tftp-server flash command FC-245
tftp-server rom command FC-245
tg (CMPC) command BC-693, BC-697, BC-699
tg (CMPC+) command BC-741
TGW (Trunking Gateway)
configuring VC-184
examples of VC-182
in MGCP VC-182
threshold command FC-349
threshold de command WC-181
threshold ecn command WC-181
threshold notifications
RTR FC-348
thresholds
See CBAC, thresholds
THT (token holding timer), FDDI IC-54
tick count, IPX P2C-140
TI MAC firmware, establishing SRB interoperability with BC-120
time
hardware clock FC-275
timeout command FC-345, FC-354, FC-356
timeout intervals
See CBAC, timeouts
timeout intervals, configuring for ATM WC-32
timeouts call-disconnect command VC-89
timeouts initial command VC-89
timeouts inter-digit command VC-122
timeouts interdigit command VC-89
timeouts ringing command VC-89
timeouts wait-release command VC-89
time range command P2C-129
time-range command FC-278, FC-429
time range configuration mode
description FC-278
summary FC-413
time ranges IPC-96
timers
BGP, adjusting IPC-317
DECnet
broadcast routing, adjusting P3C-52
hello, adjusting P3C-51
EIGRP IPC-267
EIGRP, adjusting IPC-266
Frame Relay end-to-end keepalive WC-184
Frame Relay keepalive WC-164
IGRP, adjusting IPC-217
IPX Enhanced IGRP, adjusting P2C-88
ISO IGRP, adjusting P3C-71
LAPB
hardware outage WC-263
link failure (T4) WC-263
RIP, adjusting IPC-201
TARP, configuring P3C-101
token
holding IC-54
rotation IC-54
transmission valid IC-54
X.25 Level 3 WC-274
XNS update timers P3C-128
timers, dialer
carrier wait time, enabling DC-404
disconnect DC-333
configuration (example) DC-346
fast idle, enabling DC-374
idle reset, enabling DC-371
line down-time, enabling DC-374
line idle, enabling DC-404
wait for carrier DC-655
enabling DC-374
timers, DLSw+
configuration BC-310
timers, LAT
keepalive, configuring TC-31
virtual circuit, configuring TC-31
timers basic (RIP) command IPC-202
timers basic command IPC-197, IPC-218, P3C-71
timers bgp command IPC-318
timers command VC-378
timers in H.225.0
configuring VC-238
description VC-232
software restrictions VC-236
timers lsa-group-pacing command IPC-237
timers spf command IPC-233
time services FC-265
(examples) FC-282
Banyan VINES FC-266
description FC-263
monitoring FC-277
sources FC-264
valid, preserving FC-271
timeslot command IC-102
time slot groups
TDM
configuring VC-642
time source, authoritative
description FC-265
timestamping
debug messages FC-300
log messages FC-290
time zone
configuring FC-274
timing clear-wait command VC-90
timing command VC-276
timing delay-duration command VC-90
timing delay-start command VC-90
timing delay-with-integrity command VC-90
timing dialout-delay command VC-90
timing dial-pulse min-delay command VC-90
timing digit command VC-90
timing guard-out command VC-90
timing hookflash-input command VC-218
timing hookflash-out command VC-90, VC-218
timing interdigit command VC-91
timing-mark command BC-804, BC-809
timing marks, TN3270 server configuration BC-803to BC-804
timing percentbreak command VC-91
timing pulse command VC-91
timing pulse-digit command VC-91
timing pulse-interdigit command VC-91
timing wink-duration command VC-91
timing wink-wait command VC-91
TLVs
migrating from old style to new style XC-94
See CDP (Cisco Discovery Protocol), TLVs
tmasinfo file XC-34
tmstats_ascii file XC-32
tmstats_binary file XC-34
TN3270
8-bit transparent mode TC-47
character mapping, configuring TC-46
configuration files (examples) TC-47to TC-49
connection environment (figure) TC-40
DLUR configuration mode
summary FC-414
DLUR PU configuration mode
summary FC-414
extended datastream, enabling TC-45
hexadecimal values TC-46
IBM host TC-39
keymaps
function TC-40
selection priority TC-42
listen-point configuration mode, summary FC-415
listen-point PU configuration mode, summary FC-415
null processing, enabling TC-45
overview TC-39
PU configuration mode, summary FC-415
reset-after-error TC-45
response-time configuration mode, summary FC-416
server connections TC-47
startup sequence priorities TC-41
termcaps TC-39
terminal emulations
default files TC-43
terminals TC-39
TTYcaps
function TC-40
selection priority TC-41
selection process (figure) TC-41
tn3270 8bit display command TC-47
tn3270 8bit transparent-mode command TC-47
tn3270 character-map command TC-46
TN3270 client, description BC-768
tn3270 command TC-47
tn3270 datastream command TC-45
tn3270 null-processing command TC-45
tn3270 reset-required command TC-45
TN3270 server
architecture BC-770
ASSOCIATE request
benefits BC-768
client, description BC-768
cluster
allocation BC-778
description BC-775
CMPC+ support BC-728
command modes
(figure) BC-788
DLUR configuration BC-789
DLUR PU configuration BC-790
DLUR SAP configuration BC-790
listen-point configuration BC-789
listen-point PU configuration BC-789
profile configuration BC-791
response-time configuration BC-790
security configuration BC-791
TN3270 server configuration BC-789
configuration
description BC-793
design considerations BC-784
guidelines, LU pool BC-808
legacy methods BC-818to BC-820
siftdown commands BC-793to BC-794
tasks, APPN environment BC-807to BC-814
tasks, non-APPN environment BC-807to BC-817
DLUR
configuration BC-809
link management BC-827
dynamic LU naming
(examples) BC-840
description BC-774
verification BC-821
environments, description BC-768
generic pool configuration BC-795to BC-796
idle time configuration BC-796to BC-797
implementation (figure) BC-249
inverse DNS nailing
(examples) BC-841
configuration BC-811
description BC-775
verification BC-823
IP Precedence configuration BC-797
IP ToS configuration BC-797to BC-798
keepalive configuration BC-798to BC-799
listen point configuration BC-810, BC-816
listen-point PU
description BC-813
LU allocation BC-772to BC-779, BC-813
LU deletion
description BC-779
session termination BC-779
LU nailing
algorithm BC-774
description BC-774
limits BC-784
removal (example) BC-837
LU pool
configuration BC-807, BC-808, BC-815
description BC-775
name requirements BC-775
prerequisites BC-784
LUs
DLUR BC-771
model type formation BC-772
names BC-771
static BC-771
types BC-771
LU termination
configuration BC-801
description BC-779
session termination BC-779
maximum client sessions configuration BC-802
maximum server sessions configuration BC-801to BC-802
model string mapping (table) BC-773
model type definitions BC-772
overview BC-248
PUs
configuration BC-819
description BC-770
response time
client group types (table) BC-780
configuration BC-824
configuration verification BC-825
SAP
direct PUs BC-770
DLUR, configuration BC-810
session termination, description BC-779to BC-780
siftdown commands
(table) BC-794
SNA functions BC-249, BC-768, BC-769
SSL encryption
(examples) BC-843
configuration BC-804
description BC-781
verification BC-824
TCP port configuration BC-803
Telnet server functions BC-249, BC-768, BC-769
terminal emulation BC-773
timing mark configuration BC-803to BC-804
TN3270E clients BC-772, BC-773
unbind action configuration BC-804
VTAM
host configuration BC-785
multiple host support BC-771
release 3.4 BC-784
tn3270-server command BC-808
TN3270 server configuration mode
summary FC-414
token buckets
burst size QC-204
CAR QC-205
compounded debt QC-206
conform and exceed actions QC-208
defined QC-204
extended burst size QC-206
mean rate QC-204
RSVP-ATM QoS Interworking feature QC-251
time interval QC-204
token holding timer
See THT
Token Ring
ATM networks BC-108
concentrator port
enabling IC-74
monitoring IC-74
DECnet, configuring P3C-38
DECnet, encapsulation P3C-38
DSPU configuration BC-517
encapsulation IC-72
frame-copied errors BC-120
functional address IPC-411
IBM 8209 bridges and SR/TLB BC-97
interface, displaying information BC-120, BC-265
IP multicast routing over IPC-410
LANE
configuring for MPOA XC-457
LLC2-to-Ethernet LLC2 conversion, enabling standard BC-98
MPOA
configuration (examples) XC-459
MPC to MPC Shortcut in an IP Routed Environment (figure) XC-459
MPC to MPC Shortcut in an IP SRB-Routed Environment (figure) XC-463
SNA Service Point configuration BC-527
source bridge configuration (examples) BC-122, BC-123
SRB
maintaining BC-134
TI MAC firmware problem BC-120
VLAN BC-147
Token Ring-attached router definition BC-607
Token Ring MPOA
MPC to MPC Shortcut In an IP Routed Environment (figure) XC-459
Token Ring switching, overview BC-17
TokenTalk P2C-2
tools
topology table
AppleTalk Enhanced IGRP P2C-55
IPX Enhanced IGRP P2C-155
ToS (type of service) XC-175, XC-223
bit values, displaying QC-297
CAR, rate limiting QC-205
setting for SA Agent operations FC-345
ToS (type of service), preserving over VPNs DC-539
ToS (type of service) field
defined (figure) QC-244
RSVP-ATM QoS Interworking feature QC-250
signalling QC-243
tos command FC-345
trace command FC-288
IP
privileged IPC-49
user IPC-49
ISO CLNS, user P3C-97
VINES P3C-26
traffic
broadcast XC-313
IP Precedence VC-167
congestion avoidance
TCP VC-171
controlling patterns XC-318
control with NetFlow XC-69
high-speed transport VC-171
performance XC-69
queueing VC-166
rate-limiting VC-170
shaping VC-170
traffic classes
configuration (example) QC-147
creating QC-237
defining QC-401
NBAR, configuring with QC-76
traffic classification, with NBAR QC-33
traffic engineering XC-87
configuration (examples) XC-192
configuring
backup path XC-152
filter XC-153
interface configuration to support RSVP-based tunnel signaling and IGP flooding XC-149
IS-IS for MPLS traffic engineering, configuring XC-149
MPLS traffic engineering tunnel, configuring XC-150
OSPF for MPLS traffic engineering, configuring XC-150
tunnel support, configuring XC-148
traffic engineering route
tunnel, configuring XC-153
traffic filtering
See access lists; CBAC, traffic filtering
traffic flow
MPOA XC-441
traffic parameters, ATM
PVCs WC-21
SVCs WC-34
traffic patterns XC-99
traffic policer, defined QC-21
traffic policies
attaching (examples) QC-148
bandwidth, configuring QC-188
configuring QC-75
DTS QC-238
DTS, attaching and enabling QC-238
hashed queues, configuring QC-188
interfaces, attaching QC-75, QC-405
IP Precedence, specifying QC-189
See also service policies
traffic policing
benefits QC-210
configuration, verifying QC-220, QC-221
configuring QC-219
prerequisites QC-210
restrictions QC-210
traffic policing on switched Frame Relay PVCs
(example) WC-222
configuring WC-179
traffic priority management, WFQ QC-113
traffic queueing priorities
BSTUN
configuration BC-368
customizing BC-368
STUN
(examples) BC-351, BC-355, BC-357
traffic regulation mechanisms
policing, CAR rate limiting QC-203
traffic shaping
FRTS QC-203
GTS QC-203
traffic regulation tools, differences between VC-169
traffic-shape adaptive command QC-224
traffic-shape fecn-adapt command QC-224
traffic-shape group command QC-224
traffic-shape rate command QC-224
traffic shaping
adaptive WC-175
ATM WC-36
condition signalling WC-215
Distributed
benefits QC-216
configuring QC-237
prerequisites QC-217
restrictions QC-217
excess burst size QC-212
feature summary QC-14
FRTS QC-217
GTS QC-214
on switched Frame Relay PVCs
(example) WC-222
overview of WC-179
queueing QC-214
rate of transfer QC-212
uses QC-211
VCs WC-170
See also ForeSight
See also GTS
traffic-share command IPC-217
traffic-share min across-interfaces command IPC-361
transform
See IPSec, transforms
transform sets MWC-43
transient data queue for CICS BC-581
transient ring error IC-54
transit bridging
transition mode
AppleTalk P2C-15
(example) P2C-65
translate command TC-126, TC-130, TC-131
translate lat command TC-127
translate options, virtual interface template (table) TC-128
translate tcp command TC-127
translate x25 command TC-127
translation
in VLANs XC-321
translational bridging
compatibility with IBM 8209 bridges BC-97
See also SR/TLB
translational bridging, on FDDI interface IC-53
translation-rule command VC-157
translation-rule configuration mode
summary FC-416
translation rules VC-157
translations
See protocol translations
translations, supported metric, between IP routing protocols IPC-363
transmission groups
CMPC+ configuration BC-741
CMPC configuration BC-697
overview BC-345
SNA traffic configuration BC-338
transmission timer, FDDI IC-54
transmission valid timer, FDDI IC-54
transmit clock, inverting IC-99
transmit-clock-internal command IC-99
transmit clock source, ATM WC-53
transmit delay, serial interface IC-100
transmit-interface command IPC-83
transmitter-delay command BC-497, IC-100
transmitting subscriber number
configuring VC-695
transparent bridging
administrative filtering BC-44
bridge priority, setting BC-50
Cisco features, description BC-9
Cisco implementation BC-22
concurrent routing and bridging
configuration (example) BC-61
enabling BC-37
statistics, displaying BC-59
configuration
Frame Relay BC-34
LAT compression BC-42
options BC-40
SMDS BC-36
task list BC-26
X.25 BC-36
X.25 (example) BC-71
constrained multicast flooding
enabling BC-58
multicast state information, clearing BC-59
multicast state information, displaying BC-59
DDR
access, controlling BC-34
bridging protocol, defining BC-33
Ethernet type code (example) BC-75
interface configuration BC-34
protocol (example) BC-75
dialer profiles
interfaces, configuring DC-436
Ethernet-to-Ethernet bridging (example) BC-68
Ethernet-to-FDDI configuration (example) BC-67
extended access list, defining BC-47
filtering
by vendor code BC-45
description BC-44
Frame Relay WC-11
(example) WC-211
Frame Relay, fast path BC-34
integrated routing and bridging configuration BC-10
IP BC-41
IRB
configuration BC-23
configuration (examples) BC-62
configuration, task list BC-37
multiple bridge group configuration (example) BC-64
statistics, displaying BC-59
legacy DDR, access (example) DC-381, DC-411
load balancing BC-57
monitoring and maintaining BC-59
multicast or broadcast (example) BC-70
multiprotocol LAPB BC-35
(example) WC-321
configuring WC-264
over ATM, fast switching BC-32
PA-12E/2FE Ethernet Switch
(example) BC-81
monitoring BC-55
web tool BC-55
protocol type, filtering BC-46
RFC 1483 support BC-33
sample configurations BC-59
SMDS restrictions BC-36
spanning-tree parameters, adjusting BC-50
spanning-tree topology, displaying BC-59
SRT (example) BC-69
VLAN configuration BC-28, BC-30
transparent bridging, FDDI interface IC-53
transport command DC-60, TC-10, VC-377
transport input command DC-205, TC-10
transport output command DC-172, TC-10
transport preferred command TC-10
transport protocol, tunneling IC-174
transposed characters
correcting FC-28
trap operations
defining for SNMP FC-318
trap operations, defining for hub ports IC-60
traps
modem MIB DC-94
(example) DC-97
Trimble FC-272
TRISL (Token Ring Inter-Switch Link)
automatic spanning-tree configuration BC-152
configuration (examples) BC-181
description BC-145
enabling XC-330
encapsulation XC-330
hot standby router protocol configuration BC-149
IP
routing XC-330
IP routing BC-148
IP routing source-routed frames between VLANS (example) BC-158
IPX XC-332
encapsulation XC-333
IPX routing BC-150
IPX routing non-source-routed frames between VLAN and Token Ring (example) BC-159
IPX routing source-routed frames between VLAN and Ethernet VLAN (example) BC-161
IPX Routing source-routed frames between VLAN and Token Ring (example) BC-160
IPX routing source-routed frames between VLANs (example) BC-162
RIF
configuration (example) XC-342, XC-345
RIF configuration (example) BC-156
source-route bridging configuration (example) BC-163, BC-164
source-route translational bridging configuration BC-152
source-route transparent bridging configuration BC-151
SR/TLB configuration (example) BC-167, BC-168
SRB configuration BC-151
Token Ring and VLAN configuration (example) BC-163
transparent bridging between Token Ring and VLAN (example) BC-166
TrBRF VLANs
configuration (example) XC-342
TrCRF, attaching BC-178
TRISL and Ethernet VLAN configuration (example) BC-157, BC-168
TRISL and Ethernet VLANs
configuration (example) XC-343
TRISL fast EtherChannel (example) BC-169
TRISL VLAN and Ethernet configuration (example) BC-167
TRISL VLAN and Token Ring
configuration (example) XC-345
TRISL VLAN and Token Ring configuration (example) BC-155, BC-156
TRISL VLAN configuration (example) BC-164
TRL (Transport Resource List) configuration
CMPC
description BC-695
guidelines BC-693
CMPC+ (examples) BC-761to BC-765
tasks BC-737
TR LANE (Token Ring LAN emulation)
APPN XC-373
HSRP XC-373
IP XC-373
IPX XC-373
TR-LANE (Token Ring LAN emulation)
AppleTalk XC-373
Banyan Vines XC-373
benefits XC-372
Cisco LightStream 100 XC-374
Cisco LightStream 1010 XC-374
DECnet XC-373
hardware requirements XC-374
software version XC-374
source-route transparent bridging XC-373
SRB XC-373
configuration (example) XC-401, XC-403
XNS XC-373
Trouble Call Blocking
and Enhanced Voice Services for Japan VC-861
troubleshooting FC-294, XC-181
ping command FC-288
RAS dial-peer configuration VC-255
trace command FC-288
troubleshooting ATM WC-96
TRRSM (Token Ring Route Switch Module)
automatic spanning-tree configuration BC-179
configuration prerequisites BC-176
configuration tasks BC-176
description BC-171
DLSw+ (example) BC-196
IP routing configuration BC-176
IP routing non-source-routed frames between TrBRF VLAN and Ethernet VLAN (example) BC-190
IP routing non-source-routed frames between TrBRF VLAN and VIP2 Ethernet interface (example) BC-187, BC-188
IP routing non-source-routed frames between TrBRF VLAN and VIP2 Token Ring interface (example) BC-187
IP routing non-source-routed frames between TrBRF VLANs (example) BC-189
IP routing source-routed frames between TrBRF VLAN and Ethernet VLAN (example) BC-185
IP routing source-routed frames between TrBRF VLAN and VIP2 Ethernet interface (example) BC-183
IP routing source-routed frames between TrBRF VLAN and VIP2 Token Ring interface (example) BC-182
IP routing source-routed frames between TrBRF VLANs (example) BC-184
IPX routing configuration BC-177
monitoring BC-181
source-route bridging configuration BC-178
source-route translational bridging configuration BC-179
source-route transparent bridging configuration BC-178
SR/TLB between TrBRF VLAN and Ethernet VLAN (example) BC-195
SR/TLB between TrBRF VLAN and VIP2 Ethernet (example) BC-194
SRB between TrBRF VLAN (example) BC-192
SRB between TrBRF VLAN and VIP2 Token Ring (example) BC-191
Token Ring VLAN
description BC-173
transparent bridging between TrBRF VLAN and VIP2 Token Ring (example) BC-193
VLAN
Token Ring BC-18
trunk circuits
telephone switches, connecting VC-39
trunkgroup (dial-peer) command DC-336
trunk group (global) command DC-336
trunk-group (interface) command DC-336
trunking gateway. See TGW
trusted authentication keys
NTP FC-270
trusted root
CEP
configuring
(example) 1
configuring SC-368
(example) SC-376
obtaining SC-369
SCEP
configuring SC-369
TFTP
configuring SC-369
(example) 1
trusted-root configuration mode
summary FC-395
ts16 command IC-102
TSP tunnel
head end, configuring XC-152
signaling,configuring XC-152
TTY
remote username for rcp requests FC-254
ttycap command TC-45
TTYcaps
alternate TC-46
function TC-40
line characteristics TC-46
selection priority TC-41
selection process (figure) TC-41
tty lines
configuring DC-18
numbering scheme (table) DC-27
relationship to interfaces DC-17
tunnel, unidirectional IPC-498
tunnel checksum command IC-179
tunnel destination, UDLR IPC-501
tunnel destination command IC-178, IC-179, IPC-501, MWC-31, P2C-29, P2C-30
tunnel endpoint discovery (TED)
description SC-393
restrictions SC-395
See also IKE, tunnel endpoint discovery
versions SC-394
tunneling
advantages IC-175
AppleTalk
definition IC-175
GRE IC-179
AURP P2C-29
Cayman P2C-30
brief description IC-174
no AT network address IC-179
components IC-174
destination address IC-178
encapsulation IC-179
EON IC-174
L2F TC-126
NOS IC-174
optional tasks IC-177
overview TC-121
packet, asynchronous host roaming DC-581
PPP across X.25 (examples) TC-148
precautions IC-176
recursive route IC-177
redirecting number information VC-215
required tasks IC-177
SLIP and PPP over X.25 (example) TC-170
source address IC-178
VPN
authorization search order DC-518
local tunnel authentication DC-530
local tunnel authentication (examples) DC-564
tunnel key command IC-180, IPC-27
tunnel mode command IC-179, IPC-27, P2C-29, P2C-30, P2C-36
tunnels XC-98
mapping traffic into tunnels XC-90
tunnel sequence-datagrams command IC-180
tunnel sessions
TCP or LAT WAN (example) TC-125
X.25 WAN (example) TC-125
tunnel source, UDLR IPC-501
tunnel source command IC-178, IC-179, IPC-501, MWC-31, P2C-28, P2C-29, P2C-30, P2C-36
tunnel udlr address-resolution command IPC-501
tunnel udlr receive-only command IPC-501
tunnel udlr send-only command IPC-501
Turbo ACL (Access Control List) IPC-95
turbo flooding IPC-34
TVX, FDDI IC-54
two hoot groups
hoot and holler over IP VC-851
two-stage dialing VC-137
txconn ping destination command BC-598
tx-ring-limit command QC-101
TXSeries clients BC-594
txspeed command TC-12
terminal form FC-87
type 20 packets P2C-135, P2C-136
type code, LAN Extender Interface IC-66
type command VC-49, VC-77, VC-842
RTR configuration FC-342
Type Length Values
See CDP (Cisco Discovery Protocol), TLVs
U
UAC VC-366
ubr+ command QC-360, WC-21, WC-35
ubr command QC-360, WC-21, WC-35
UDLR (unidirectional link routing)
See IP multicast routing, UDLR
UDP (User Datagram Protocol)
broadcast addresses, establishing IPC-33
datagrams
flooding IPC-34
speeding up flooding IPC-34
services, accessing FC-261
turbo flooding IPC-34
using with RIP IPC-199
UDP (User Datagram Protocol), charging gateway path MWC-22
UDP filtering
See CBAC
udp-port command IPC-516
UDP port numbers, IPTalk P2C-36
UDPTN (User Datagram Protocol Telnet)
configuring DC-172
overview DC-171
udptn command DC-173
UDP unicast
DLSw BC-283
unbind-action command BC-804, BC-809
unbind actions, TN3270 server configuration BC-804
UNBIND request
CICS BC-779
LU termination BC-779
unbundle vfc command VC-871, VC-872, VC-874
undelete command FC-141, FC-144
Ungermann-Bass Net/One
See Net/One
UNI (User-Network Interface)
ATM version override, configuring WC-32
UNI (User-Network Interface), version 3.0 IC-85
Unicast RPF (Unicast Reverse Path Forwarding)
ACLs
events, logging SC-433
packets
dropping 1
forwarding 1
aggregation routers (figure) SC-439
applying SC-436
BGP attributes
caution SC-435
CEF
requirement SC-432
tables SC-439
configuring SC-442
aggregation routers (figure) SC-439
BOOTP SC-440
DHCP SC-440
enterprise network (figure) SC-437
prerequisites SC-442
routing table requirements SC-439
tasks SC-442
troubleshooting SC-444
verifying SC-444
deploying SC-436
disabling SC-445
enterprise network (figure) SC-437
FIB SC-432
implementing SC-435
maintaining SC-445
monitoring SC-445
packets, dropping (figure) SC-435
per-interface statistics
packets
dropped 1
suppressed drop 1
prerequisites SC-442
restrictions
basic SC-440
routing asymmetry SC-439
routing asymmetry (figure) SC-440
routing table requirements SC-439
security policy
applying SC-436
attacks, mitigating SC-436
deploying SC-436
tunneling SC-436
source addresses, validating SC-433
failure SC-434
traffic filtering SC-436
troubleshooting SC-444
tunneling SC-436
validation
packets, dropping SC-434
source addresses SC-434
verifying SC-444
UNIX
messages FC-293
syslog daemon FC-293
unstructured CES
on the ATM-CES port adapter WC-87
on the CES network module WC-84
update broadcast (IGRP) IPC-214
upgrade system software
run-from-Flash systems FC-215
URL Prefixes (aliases)
use in IOS file system FC-134
URLs
IFS file location FC-133
in commands FC-136
specifying user privilege levels in FC-121
use-interface command MWC-29
use-proxy command VC-330
user
agent server VC-366
user EXEC mode
commands FC-10
description FC-10
user menus
See menus
username callback-dialstring command DC-643, DC-644, DC-645
username callback-line command DC-643, DC-644, DC-645
username callback-rotary command DC-643, DC-645
username command DC-400, DC-599, DC-643, DC-800, SC-48, TC-13, TC-72
username nocallback-verify command DC-644
usernames, maximum links (example) DC-621
User-Network Interface
See UNI
user security BC-582
utilities
V
V.110 modem calls, selective filtering of incoming DC-193
V.120 Modem Standard DC-56
V.120 standard
dynamic detection DC-203
dynamic detection (example) DC-204
ISDN asynchronous communications DC-202
on virtual asynchronous interface DC-202
V.90 modem standard DC-54
vacant-message command FC-97
vacant terminal message
configuring FC-97
vad (dial-peer) command VC-399
validate-update-source command IPC-207, IPC-218
variable-length dial plans VC-122
variable-length matching VC-138
variance command IPC-216
vbr-nrt command QC-360, WC-21, WC-35
vbr-rt command VC-428
VC (virtual circuit)
See ATM FC-394
vc-class atm command WC-40
VC classes
(examples) WC-104
ATM
configuring WC-39
PVCs, configuring WC-25
SVCs, configuring WC-37
VC classes, assignment
VC bundle QC-358
VC bundle member QC-360
VCC types
(figure) XC-367
vc-group command WC-235
V character
meaning in copy output FC-178
vc-hold-queue command QC-141
vci-to-vpi ratio, setting WC-53
VC packet hold queue size, defining WC-288
VCs (virtual circuits)
ATM WC-8
classes, configuring WC-40
management, configuring WC-41to WC-45
parameters, configuring WC-40
ATM, circuit bumping QC-353
bundles
See ATM VC bundles
See also Frame Relay, SVCs; PVCs; SVCs
X.25
facility handling WC-349
multiprotocol WC-279
protocol identification WC-279
ranges WC-266
VCWare
and VFC management VC-869
vendor code
administrative filtering BC-45, BC-113
filtering BC-113
verification
H.323 gateway interface configuration VC-252
multiple codec configuration VC-277
version
Cisco IOS
displaying FC-177
show running FC-229
version command IPC-202
VFC Management (Cisco AS5300) VC-869
add codecs to capability list VC-689, VC-874
add files to default file list VC-689, VC-874
copy flash files to VFC VC-687, VC-872
delete files from VFC flash memory VC-690, VC-875
download VCWare VC-685, VC-870
erase VFC memory VC-690, VC-875
unbundle VCWare VC-688, VC-873
VFC management (Cisco AS5300) VC-684
video
ATM
configuration (example) VC-766
over PVCs and SVCs VC-738
troubleshooting VC-749
configuration (examples) VC-766
dial peers
configuring VC-746
overview VC-721
support by platform VC-722
video codec
configuring serial interfaces VC-737
video conferencing XC-98
video over ATM AAL1
configuring VC-727
video traffic configuration
CES (example) VC-768
CES on the MC3810 (example) VC-768
on a Cisco 3600 router (example) VC-769
over ATM AAL1 VC-727
over ATM PVCs and SVCs VC-730
pass-through mode VC-725
view records
creating and deleting FC-313
VINES
access control P3C-18
access lists
configuration (example) P3C-30
creating P3C-19
displaying P3C-26
extended P3C-18
interface, applying to P3C-19
simple P3C-19
standard P3C-18
types P3C-18
addresses
base of host addresses P3C-21
host names, assigning to P3C-20
application layer support P3C-26
broadcasts
encapsulation P3C-20
forwarding P3C-25
serverless networks P3C-18
Cisco's implementation P3C-2
class field P3C-25
configuration
tasks P3C-16
DDR, configuring DC-358
dialer profiles DC-432
encapsulation P3C-20
fast switching
deleting P3C-26
displaying P3C-26
filters
configuration (example) P3C-30
interface, applying to P3C-19
types P3C-19
floating static routes P3C-24
hello messages P3C-21
hop count field P3C-25
host
names, assigning to addresses P3C-20
name table, displaying entries P3C-26
interfaces, status P3C-26
IPC connections, displaying information P3C-26
IP header P3C-25
load sharing P3C-23
logical network (figure) P3C-16
MAC-level echo P3C-2
metrics, routing P3C-2, P3C-17
monitoring tasks P3C-26
name-to-address mapping P3C-2
neighbor stations P3C-25, P3C-26
network connectivity, testing P3C-26
network number P3C-15
NTP P3C-23
over WANs P3C-25
packet path, tracing P3C-26
router's network address, redetermining P3C-26
routing
concurrent routing and bridging P3C-18
enabling (example) P3C-27
enabling on interface P3C-17
flash updates P3C-22
serverless networks (examples) P3C-27
table P3C-26
RTP
redirect messages P3C-22
routing
best path, determining 1
starting P3C-17
serverless networks P3C-18
single route P3C-24
SRTP, starting P3C-17
static paths P3C-25
static routes P3C-24
subnetwork number P3C-16
time
configuration (example) P3C-31
NTP P3C-23
synchronization P3C-23
updates, accepting P3C-23
updates, sending P3C-23
time service
configuring FC-273
description FC-266
traffic statistics P3C-26
VINES (Virtual Integrated Network System)
Inverse ARP support WC-12
multicast address, SMDS address mapping WC-246
SMDS, configuring WC-250
vines access-group command P3C-19
vines access-list command DC-358, DC-432, P3C-19
vines decimal command P3C-21
vines encapsulation command P3C-20
vines enhancements command P3C-22
vines host command P3C-20
vines metric command P3C-17, XC-326
vines neighbor command P3C-25
vines propagate command P3C-25
vines redirect command P3C-22, P3C-23
vines route-cache command P3C-23, XC-16
vines route command P3C-24
vines routing command P3C-17, P3C-26, XC-326
vines single-route command P3C-24
vines split-horizon command P3C-22
vines srtp-enabled command P3C-17
vines time access-group command P3C-23
vines time destination command P3C-23
vines time participate command P3C-23
vines time services command P3C-23
vines time set-system command FC-274, P3C-23
vines time use-system command FC-273, P3C-23
vines update deltas command P3C-21
vines update interval command P3C-21
VIP
distributed switching XC-72
between ISL VLANs XC-335, XC-347
enabling XC-335
ISL encapsulation XC-335
ISL VLAN traffic XC-334, XC-346
routing decisions XC-5
VLAN configuration (example) XC-347
VIP, Frame Relay compression on WC-199
VIP2-50 IC-103
VIP-distributed CAR
See DCAR
VIP-distributed WRED
See DWRED
virtual access interfaces WC-151
configuration information sources DC-484
configuration rules DC-490
creation criteria DC-485
description DC-11
maximum number, configuring TC-124
monitoring DC-486
protocol translations
maintaining TC-145
monitoring TC-145
sessions TC-124
selective creation DC-485
(example) DC-487
two configuration sources (example) DC-484
virtual address request andreply, Probe address resolution IPC-14
virtual asynchronous interfaces
description DC-12
ISDN traffic over DC-201
maximum transmission unit, configuring TC-142
PPP authentication, enabling TC-143
V.120 support DC-202
virtual terminal lines, configuring TC-139
virtual channel identifier
table entries, establishing XC-87
virtual circuits XC-174
configuring for the 6400 UAC XC-138
configuring more than one XC-229
creating different control VCs XC-128
determining the default control VC XC-140
reducing the number XC-132
virtual circuits, LAT timers TC-31
virtual command IPC-143
virtual data-link control
APPN over DLSw+
DSPU
configuration BC-520
configuration (example) BC-534
over DLSw+, supporting BC-210, BC-287
SNA Service Point
configuration BC-529
configuration (example) BC-537
over DLSw+, supporting BC-210, BC-287
virtual interface IC-181
virtual interfaces
H.323 support VC-278
configuration (example) VC-288
multicast fast switching
configuring VC-838
See loopback interface; subinterfaces; tunneling
virtual interface templates
maximum number, configuring TC-124
protocol translations
authentication, configuring TC-129
benefits TC-125
configuring TC-145
one-step, configuring TC-127
tunneling PPP across X.25 (examples) TC-148
two-step, configuring TC-129
tunneling
PPP two-step protocol translation TC-129
SLIP two-step protocol translation TC-129
virtual links, OSPF IPC-231
Virtual Network System
See VINES
virtual path filter, ATM WC-55
virtual paths
defining more than one XC-140
for edge LSRs XC-140
for internodal BPX connections XC-140
virtual path shaping, ATM WC-92
virtual-profile aaa command DC-497, DC-498
virtual-profile if-needed command DC-486
virtual profiles
AAA
configuration (example) DC-494, DC-501, DC-504
configuring DC-493, DC-495, DC-497
per-user configuration
TACACS+ user profile (example) 1
configured by virtual template on PPP (example) DC-487
interoperations, legacy DDR DC-490
MLP
cloning sequence (table) DC-491
configuration requirements DC-491
interoperations DC-491
per-user configuration DC-696, DC-697
physical interface interoperation, configuring DC-490
user-specific interface configuration DC-492
virtual access interfaces
cloning sequence (table) DC-491
selective creation DC-485
selective creation (example) DC-487
virtual template and AAA
configuration (example) DC-494, DC-495, DC-502, DC-515
configuring DC-497
virtual template interfaces
configuration (example) DC-499
information, defining DC-492
physical interface overrides DC-492
See also virtual template interfaces
virtual templates
configuring DC-496
interoperability DC-491
virtual-profile virtual-template command DC-483, DC-498
virtual rings
(example) BC-131
using with LAN Network Manager BC-104
virtual-template command DC-535, WC-132
virtual template interfaces
configuration (examples) DC-486to DC-488
configuration commands contained in DC-493
configuration service (example) DC-487, DC-493
configuring DC-486, DC-496, DC-498, DC-635
features DC-485
GGSN
(example) MWC-55
description MWC-13
fast switching, enabling on MWC-34
GTP encapsulation, configuring MWC-18
verifying MWC-50
IP RTP Priority, configuration (examples) QC-149
IP unnumbered DC-486, DC-496, DC-498
limitations DC-483
LLQ, configuration (examples) QC-153
monitoring DC-486
per-user configuration DC-695
stack groups, configuring DC-635
virtual profiles on PPP (example) DC-487
VPN, configuring DC-535
Virtual Template Interface Service feature DC-484
virtual templates, configuring WC-121
virtual terminals, installing client BC-582
virtual Token Ring implementation BC-425
virtual trunks
definition XC-119
redundancy, adding XC-129
VLANs
addressing XC-321
AppleTalk
over IEEE 802.10 encapsulation XC-349
subinterface customization XC-350
AppleTalk over ISL encapsulation XC-324
AppleTalk Phase II support XC-321
AppleTalk support P2C-3
Banyan VINES over ISL encapsulation XC-326
Banyan VINES support XC-321
broadcast domain XC-311
colors XC-318
communication between XC-313, XC-318
connecting Fast Ethernet devices XC-319
DECnet over ISL encapsulation XC-326
DECnet support XC-321
description XC-311
designing switched VLANs XC-321
encapsulation format XC-351
EtherType XC-315
frame tagging XC-318
hybrid switching environments XC-321
identifier XC-318
IEEE 802.10 encapsulation XC-318
IEEE 802.1Q encapsulation
BPDU reception XC-317
BPDU transmission XC-317
egress rules XC-314
forwarding rules between ports XC-314
ingress rules XC-314
restrictions XC-353
IEEE 802.3 encapsulation XC-315
interoperability XC-320
IP routing BC-148
IP routing over IEEE 802.1Q
configuration (example) XC-359
IPX XC-333
IPX support P2C-5
ISL encapsulation XC-318
isolation between XC-313
LAN segmentation XC-321
Layer 2 translation XC-318
Layer 3 routing XC-318
load balancing XC-321
native VLAN ID XC-316
network
changes XC-318
design XC-318
management XC-313
performance, accounting
QoS 1
Novell IPX encapsulation XC-321
packets traversing shared backbone XC-324
performance XC-318
PVID
redundancy in XC-321
routers in XC-321
routing between XC-321, XC-346
routing configuration (example) BC-67
routing Novell IPX XC-331
segmenting LANs with XC-311, XC-312
sharing resources between XC-321
supported VLAN encapsulation formats XC-320
translation XC-321
transparently bridged configuration (example) BC-64
VlanDirector XC-318
VLAN ID XC-315
native XC-316
VLAN identifier in IEEE 802.10 encapsulation XC-349
XNS over ISL encapsulation XC-335, XC-336, XC-337
XNS support XC-321
VLSMs (variable-length subnet masks)
definition IPC-358
ODR support IPC-196
OSPF (example) IPC-244, IPC-374
RIP Version 2 IPC-199
VoATM (Voice over ATM)
AAL2 encapsulation VC-429
AAL5, voice traffic using VC-426
back-to-back configuration (example) VC-443
Cisco 3600 router configuration (example) VC-447
Cisco MC3810 concentrator configuration (example) VC-451
configuration prerequisites VC-425
overview VC-421
restrictions VC-425
troubleshooting VC-440, VC-443
VoATM dial peers configuration VC-433
voice and data traffic configuration (examples) VC-444
VoFR (Voice over Frame Relay)
Cisco-switched trunks VC-389
Cisco-trunk (private line) calls VC-389
dynamic switched calls VC-389
dial-peer configuration VC-388, VC-395
fragmentation methods VC-390
map class configuration VC-392
overview VC-387
prerequisites VC-393
static FRF.11 trunks VC-390
traffic shaping VC-392
vofr command VC-401
voice-card command VC-46, VC-64, VC-844
voice class busyout command VC-563
voice class codec command VC-276
voice-class codec command VC-277
voice class configuration mode
summary FC-417
voice class dualtone command VC-87
voice class h323 command VC-238
voice-class h323 command VC-238
voice class permanent command VC-841
voice-class permanent command VC-544, VC-841
voice confirmation-tone command VC-818
voice gateway image, RSVP to ATM SVC mapping VC-723
voice hunt command VC-147
voice multicasting VC-830
voice multicasting over Ethernet LAN
hoot and holler
configuration (example) VC-846
voice multicasting over Frame Relay
improving quality of service (example) VC-850
voice multicasting over WAN (example) VC-849
Voice over Frame Relay, Frame Relay fragmentation methods QC-316
Voice over IP
benefits VC-12
codec negotiation VC-225
configuration
audio index files VC-490
debit card for packet telephony VC-479
Frame Relay for Voice over IP VC-17
IP
networks for real-time voice traffic 1
IVR VC-457
number expansion VC-155
POTS dial peer VC-128
QoS VC-14
settlement for packet telephony VC-499
VFC management (Cisco AS5300) VC-684, VC-869
VoIP dial peers VC-131
configuration examples VC-18
Cisco 3600 VC-19
Cisco AS5300 VC-26
Cisco AS5800 VC-29
debit card for packet telephony VC-494
Frame Relay for Voice over IP VC-18
FXS-to-FXS connection using RSVP (Cisco 3600) VC-19
linking PBX users
to a T1 ISDN interface (Cisco AS5300) 1
with E&M trunk lines (Cisco 3600) 1
PSTN gateway access using FXO connection
Cisco 3600, PLAR mode 1
DTMF relay VC-216
enterprise environment, description VC-457
enterprise environment, overview VC-9
enterprise environment, summary VC-457
gateway
resource availability reporting Version 2 VC-215
hookflash relay VC-217
redirect number information tunnel VC-215
service provider environment, overview VC-11
simulated trunk connection VC-533
troubleshooting
dial-peer configuration VC-136
RAS configuration VC-255
trunking overview VC-533
verification
AAA VC-262
debit card for packet telephony configuration VC-494
dial-peer configuration VC-135
IVR configuration VC-469, VC-706
Voice over IP, strict priority queueing QC-10, QC-93, QC-97
Voice over IP QSIG Network Transparency
Cisco AS5300 VC-630
voice port command VC-817
voice-port command VC-48, VC-77, VC-248, VC-275, VC-401, VC-439, VC-550, VC-841
voice-port description
configuring VC-248
voice-port description command VC-229
voice-port description support
gateways VC-229
voice ports
analog
codec complexity, configuring VC-45, VC-63
fine tuning VC-79
platforms supported VC-43
port configuration (table) VC-41
troubleshooting VC-109
verifying configuration VC-98
analog and digital transmission support (table) VC-37
basic parameters VC-62
busy out trigger events for voice ports VC-561
busy out trigger events from serial interfaces VC-558
configuration limits VC-562
configuration mode VC-77
configuration overview VC-36
configuring
troubleshooting tips VC-599
configuring in high-density voice network modules VC-844
digital
bit modifications VC-80
fine tuning VC-79
requirements VC-56
slot⁄port designations (table) VC-57
troubleshooting VC-109
verifying configuration VC-98
DS0 groups on digital T1/E1 VC-71
E1 configuration VC-66
fax mode, testing VC-115
loopback function, testing VC-113
physical connections to telephony devices VC-37
relay-related functions, testing VC-115
T1 configuration VC-66
testing VC-111
timeouts, configuring VC-88
timing parameters VC-90
voice activity detection VC-92
voice classes
(example) VC-567
voice quality, tuning VC-93to VC-98
Voice Select Warp
and Enhanced Voice Services for Japan VC-860
voice-service configuration mode
summary FC-417
voice-service session configuration mode
summary FC-417
voice service voatm command VC-431
voice traffic, Frame Relay map class to support VC-394
voice traffic, requirements QC-245
Voice Warp
and Enhanced Voice Services for Japan VC-860
modem pass-through VC-777
T.38 Fax Relay VC-678
VoIP dial peers
configuring VC-839
voluntary tunneling
See client-initiated VPNs
VPDN (virtual private dialup network)
See VPDN groups; VPDN profiles; VPN
VPDN (virtual private dialup network), Layer 2 forwarding TC-126
vpdn enable command DC-530, WC-132
vpdn group command WC-132, WC-134, WC-136
vpdn-group command DC-534, DC-750, DC-751
VPDN group configuration mode
summary FC-418
VPDN groups, description DC-723
vpdn history failure table-size command DC-542
vpdn logging command DC-542
vpdn logging history failure command DC-542
vpdn profile command DC-750
VPDN profile configuration mode FC-418
VPDN profiles, description DC-723
vpdn search-order command DC-535
vpdn session-limit command DC-540
vpdn softshut command DC-540
VPI (virtual path identifier)
in virtual trunks XC-119
range XC-178
setting XC-121
VPN (Virtual Private Network) XC-117
AAA
component interface DC-759
configuring DC-524
negotiation, troubleshooting DC-559
client-initiated architecture DC-509
configuration (examples) DC-562to DC-568, DC-771
configuration modes DC-521
connection-oriented XC-98
control packet problem, troubleshooting DC-556
debug commands DC-547
debug output, verifying DC-548
defining XC-154
dial-in
configuring DC-534
configuring, (example) DC-565to DC-567
L2F DC-511
protocol negotiation 1
tunnel authentication 1
verifying 1
L2TP
AAA tunnel definition lookup 1
call sequence 1
debug output 1
PPTP DC-509
flow control alarm 1
protocol negotiation 1
topology DC-544
virtual template, configuring DC-535
dial-out
configuration (example) DC-568
configuring DC-536
dialers, configuring DC-529
L2TP debug output DC-550
GGSN, configuration (example) MWC-57
hardware terminology DC-508
technology-specific terms DC-509
IBGP distribution XC-102
IP ToS preservation DC-539
label XC-98
load sharing (example) DC-772
monitoring and maintaining DC-547
multiple XC-98
NAS
dial-in, configuring DC-534
(example) 1
dial-out, configuration (example) DC-568
dial-out, configuring DC-537
outgoing connections DC-519
tunnel authorization search order DC-518
NAS-initiated architecture DC-509
operation, verifying XC-166
packets XC-98
partitioned routes XC-98
per-user configuration DC-538
PPP negotiation, troubleshooting DC-558
prerequisites DC-523
QoS preservation DC-539
route label XC-110
routes XC-98
exchanging between autonomous systems XC-164
exchanging between sub-autonomous systems in a confederation XC-164
partitioning XC-98
route target communities XC-102
solutions XC-97
topology DC-544
traffic XC-98
troubleshooting DC-547, DC-760to DC-763
tunnel authentication
configuration (examples) DC-564
configuring DC-530
tunnel lookup
DNIS DC-519
host name DC-519
tunnel secret, troubleshooting DC-554
tunnel server
definition DC-508
dial-in, configuring DC-535
(example) 1
dial-out, configuring DC-536
(example) 1
tunnel session limit, configuring DC-540
tunnel shutdown DC-539
tunnel soft shutdown, configuring DC-540
verifying DC-542
virtual template, configuring DC-535
VPDN MIB and Syslog Facility
event logging, configuring DC-541
supported objects DC-508
table history size, configuring DC-542
VPN group commands (table) DC-523
VPN subgroup commands (table) DC-522
VRF configuration mode
summary FC-419
VRF table XC-166
vrn command BC-810
VSI (Virtual Switch Interface)
Cisco 6400 UAC, configuring for XC-138
control interface XC-180
LSC redundancy, configuring for XC-128
protocol XC-178
session, displaying XC-180
VTAM (Virtual Telecommunications Access Method)
CMPC+ requirements BC-734
CMPC requirements BC-676
CSNA
configuration, task list BC-678to BC-680
host verification BC-690to BC-691
requirements BC-676
router verification BC-691
troubleshooting BC-692
definitions, SDLLC configuration BC-443
EBCDIC character translation BC-786
local SNA major node, CMPC BC-695
logmode table entry BC-578
major node definitions BC-579
SAP BC-616
switched major node
CSNA (example) BC-680
CSNA configuration BC-679
TN3270 server
configuration (example) BC-785
configuration, guidelines BC-784to BC-786
INCLUD0E BC-770
LU deletion BC-779
multiple host support BC-771
TRL configuration
CMPC BC-695
CMPC+ (examples) BC-761to BC-765
guidelines, CMPC BC-693
tasks BC-737
XCA support BC-247, BC-674, BC-678, BC-679to BC-690
VTP domain, IPX MLS
adding VTP domain interface XC-294
VTRA (virtual Token Ring address), SDLLC BC-218, BC-388, BC-415
vty-arap command DC-641
vty-async command DC-204, TC-132, TC-140
vty-async dynamic-routing command DC-580, TC-141
vty-async header-compression command TC-142
vty-asynchronous authentication information
buffer TC-147
logging TC-147
UNIX syslog server TC-147
vty-async ipx ppp-client loopback command DC-580, TC-141
vty-async keepalive command TC-142
vty-async mtu command TC-143
vty-async ppp authentication chap command TC-144
vty-async ppp authentication pap command TC-144
vty-async virtual-template command DC-205, TC-129
W
WAN (wide-area network)
overview
ATM WC-2
WANs
DECnet support P3C-3
edge functions VC-165
ISO CLNS over
configuring P3C-92
overview
ATM WC-2
IP and ARP WC-9
transparent bridging configuration BC-32
WANs, configuring over IP IPC-114
warm standby routing XC-124
warning messages
for the environmental monitor FC-305
watchdog packets P2C-121
WCCP (Web Cache Communication Protocol)
configuring on a router FC-373to FC-385
service groups FC-379
specifying protocol version FC-378
WCS (writable control store) FC-207
web browser
using to configure Cisco IOS devices FC-117
web caches
See cache engines
web cache services
description FC-376
web caching
See web cache services
See also WCCP
web hosting XC-98
web scaling FC-373
weight command IPC-142
weighting techniques VC-167
IP Precedence VC-167
policy routing VC-167
RSVP (Resource Reservation Protocol) VC-167
WFQ (weighted fair queueing)
class-based
See CBWFQ
as a QoS building block XC-167
class-based
See CBWFQ
comparison (table) QC-83
configuring QC-114
considerations QC-86
default queueing method QC-86
effect of custom queueing on QC-115
effect of priority queueing on QC-115
enabling QC-276, QC-364, QC-365
flow-based
configuration (example) QC-141
overview QC-84
flows
high-bandwidth traffic QC-85
low-bandwidth traffic QC-85
Frame Relay QC-87
how it works (figure) QC-85
IP Precedence QC-86
IP RTP Priority VC-169
monitoring QC-115
overview QC-83
per-VC
classes of service supported QC-363
configuring QC-364
policy maps, attaching to VCs QC-365
restrictions QC-86
RSVP QC-87
service policies, attaching QC-365
strict priority queueing QC-94
traffic priority management QC-113
types QC-79
uses QC-86
See also CBWFQ; DCBWFQ
where command DC-143
which-route command P3C-97
width command FC-84
wildcard blocks, status, displaying IPC-119
Wild Card Filter, RSVP QC-263
wildcards
LANE address templates XC-376
wildcard symbols in destination patterns VC-121
working interface, APS IC-132
WRED (Weighted Random Early Detection)
as a QoS building block XC-167
average queue size QC-176
behavior QC-175
configuration (example) QC-192
congestion avoidance mechanism QC-186
DiffServ compliance
usage scenarios QC-183
verifying QC-192
DSCP value
configuration (example) QC-198
configuring QC-190
verifying QC-192
effect on packet flows QC-181
exponential weight factor, configuring QC-120, QC-122, QC-356
for congestion avoidance XC-114
function XC-114
IP Precedence QC-175
packet drop QC-175
defining QC-356
displaying QC-356
platform support QC-177
point-to-point XC-221
RED group configuration mode FC-407
restrictions QC-185
RSVP QC-175
TCP QC-176
uses QC-175
VC bundles QC-349
writable control store
storing microcode in FC-207
write command BC-639
write memory command IC-64
write terminal command
See show running-config command
X
X.121 addresses
aliases WC-275
interface-based insertion and removal WC-295
setting WC-268
understanding WC-275
X.121 symbolic host names TC-135
X.121-to-IP addressing correlation WC-298
X.25
access lists (example) WC-343
addresses
BFE conventions WC-313
datagram, mapping WC-280
datagram, transport WC-277
destination hosts addresses, mapping WC-281
interface, setting on WC-268
pattern matching (example) WC-323
replacing WC-275
substitute in local route WC-296
X.121 address mapping WC-280
address mapping DC-409
alias X.121 address WC-275
assigned routes, displaying WC-319
BFE
(example) WC-340
address conventions WC-313
configuring WC-312
booting from a network server (example) WC-341
bridging WC-283
bundling X.25 and LAPB commands WC-301
calling address insertion and removal WC-295
(example) WC-329
Call Request packet WC-276
closed user groups (CUGs) WC-303
CMNS
configuring routes WC-302
interface WC-319
on leased lines (example) WC-334
routing WC-301
switching (example) WC-332
switching over a PDN (example) WC-332
compressed packet header WC-283
compression, payload WC-284
configuring WC-264
(example) WC-321
CUGs
(examples) WC-337
access, incoming and outgoing WC-307
CUG numbers, mapping WC-309
incoming and outgoing access WC-308
local CUG to network CUG, mapping WC-308
membership selection WC-306
network subscription WC-303
point of presence (POP) WC-306
POPs on CUGs, configuring WC-308
preferential WC-305
protection and security WC-304
selection facility suppression WC-310
service, access, and properties, configuring WC-308
custom queuing WC-302
datagram transport
(figure) WC-277
configuring WC-277
description WC-15
DCE encapsulation WC-266, WC-288
DDN
(example) WC-339
address conventions (figure) WC-313
configuring WC-312
encapsulation types WC-314
mapping algorithm WC-312
standard service WC-314
type of service (TOS) field WC-314
DECnet support P3C-3
destination address, modifying WC-296
destination of route, selecting WC-290
destination time, ignore WC-285
DNS-based routing WC-296
(example) WC-331
DTE encapsulation WC-266, WC-288
DTR dialing (example) DC-423
dynamic circuit-switched client DC-232
dynamic mapping of IP and X.121 addresses WC-280
encapsulation, enabling WC-293
facilities supported WC-289
facility handling WC-349
failover
(example) WC-323
interface, configuring WC-273
profile, configuring WC-274
verifying WC-274
failure detection, remote WC-315
fast select facility, unrestricted WC-287
flow control
effect on queueing WC-302
parameter negotiation WC-269
setting WC-271
values WC-294
forwarding calls (example) WC-329
general statistics, displaying WC-319
hunt groups
configuring WC-294
routing tables, adding to WC-294
incoming calls to a map, restricting WC-288
IP datagrams over WC-289
IP route statements WC-297
IP split horizon, default WC-278
ISDN D channel DC-232
configuration (example) DC-233
overview DC-231
ISO CLNS, encapsulating P3C-4
ITU-T and ISO specifications WC-15
keepalives, enabling WC-292
LAT connection (example) TC-174
legacy DDR
dialers supported DC-378, DC-409
DTR dialing (example) DC-391, DC-423
load balancing (example) WC-327
local acknowledgment
flow control parameter negotiation WC-269
packet size WC-270
window size WC-270
local acknowledgment (example) WC-336
locally switched PVC WC-291
mapping protocol address to remote host DC-379
map usage, restricting WC-288
M-bit WC-272
mnemonic resolution WC-299
modulo (extended packet sequence) WC-289
networks, PPP calls over DC-854
network user ID (Cisco) WC-287
NSAP-to-X.25 address mapping for ISO CLNS, configuring P3C-93
number of SVCs, specifying WC-285
OSPF, broadcasts WC-282
outgoing calls from a map, restricting WC-288
over Frame Relay (Annex G) WC-300
(example) WC-331
over ISDN WC-15
over TCP (XOT) WC-288, WC-294, WC-296
packet
acknowledgment policy WC-286
hold queue WC-288
numbering modulo, setting WC-268
sizes WC-271
packet-layer protocol (PLP) WC-15
packet size, setting WC-270
PAD
access, configuring WC-282
PAD-to-TCP translations (example) TC-176
payload compression WC-284
ping over (example) WC-340
PLP restarts WC-276
precedence handling WC-314
preferential CUGs WC-306
priority queuing WC-302
profiles
creating WC-301
DLCI WC-301
profile script (example) WC-343
protocol encapsulation options WC-279
protocol identification WC-279
protocols supported, routing WC-15
public data network (PDN) WC-15
PVC
exchange IP traffic (example) WC-325
IP traffic exchange (figure) WC-325
remote tunneling (example) WC-326
switching (example) WC-323, WC-326
QLLC over WC-16
remote failure detection and backup interface (example) WC-342
remote failure detection with IP static routes (example) WC-342
restricted fast select facility WC-287
routes
assigning WC-301
configuring WC-290
route table WC-290
routing
(example) WC-324
configuring WC-289
enabling WC-289, WC-293, WC-294
protocols, supported WC-15
remote switching WC-15, WC-288
static table WC-288
(example) 1
table, positional parameters (example) WC-323
XOT alternate routes WC-296
security, POPs WC-303
services, displaying WC-319
source address, modifying WC-296
source and destination addresses, modifying WC-290
specifications WC-15
subaddress WC-275
subinterfaces
configuration
(example) 1
configuring WC-277
switching, local or remote WC-15
switching, remote WC-15
switching between PVCs and SVCs WC-292
(example) WC-328
switching feature (example) DC-867
TCP/IP networks WC-296
TCP keepalives WC-292
timers WC-274
tunneling WC-15, WC-288, WC-289
user facilities
accept reverse charging WC-287
closed user groups (CUG) WC-286
configuring WC-283
flow control parameter negotiation WC-286
list of WC-286
network user ID (Cisco) WC-287
Recognized Operating Agency (ROA) WC-287
reverse charging WC-287
throughput class negotiation WC-287
transit delay WC-287
VC connection, terminating WC-291
virtual circuits
clearing WC-319
displaying WC-319
establishing WC-276
idle time, setting WC-285
multiprotocol WC-279
options available WC-279
protocol
(table) 1
encapsulation 1
identification 1
ranges
(example) 1
keywords (table) 1
setting 1
setting WC-270
X.121
aliases WC-275
setting WC-268
X.28 mnemonics WC-297
X.28 PAD
command signals TC-100
configuration (examples) TC-109
configuring access TC-99, TC-100
emulation mode, entering TC-100
emulation mode prompt TC-100
remote access, configuring TC-103
X.29
access lists (example) WC-343
profile script (example) WC-343
X.3 PAD EXEC mode
configuration (examples) TC-111
connections, monitoring TC-97
parameters, configuring TC-97, TC-102
sessions
monitoring 1
starting 1
stopping 1
XOT WC-296
PVC (figure) WC-326
virtual circuits, displaying WC-319
XOT routing in DNS, configuring WC-300
See also LAPB
See also AO/DI, clients, X.25; AO/DI, servers, X.25
X.25 profile configuration mode
summary FC-419
X.25 route substitutions
regular expression pattern matching in TC-206
X.25 transparent bridging
(example) BC-71
configuration BC-36
X.29
access lists TC-134
(example) WC-343
applying to a line WC-318
configuring TC-133
creating WC-318
Indication of Break packet TC-189
profile script (example) WC-343
X.29 reselect function, configuring TC-107
X.3 PAD parameters
ancillary device control (5) TC-187
character delete (16) TC-192
control of PAD service signals (6) TC-188
description TC-185
discard output (8) TC-189
DTE speed (11) TC-190
echo (2) TC-186
echo mask (20) TC-193
editing (15) TC-192
edit PAD service signals (19) TC-193
input flow control (12) TC-191
line delete (17) TC-192
line display (18) TC-192
line feed insertion (13) TC-191
line feed padding (14) TC-191
line folding (10) TC-190
local editing (15) TC-192
padding after return (9) TC-189
PAD recall using a character (1) TC-186
page wait (22) TC-197
parity treatment (21) TC-194
selection of data forwarding signal (3) TC-186
selection of idle timer delay (4) TC-187
X.3 parameter settings
See X.25, X.3 PAD EXEC mode; X.3 PAD
x25 accept-reverse command WC-287
x25 address command BC-295, DC-244, DC-245, DC-379, DC-409, WC-268
x25 alias command WC-275
x25 aodi command DC-246
x25 default command WC-276
x25 facility cug command WC-286
x25 facility packetsize command WC-286
x25 facility reverse command WC-287
x25 facility roa command WC-287
x25 facility throughput command WC-287
x25 facility transit-delay command WC-287
x25 facility windowsize command WC-286
x25 fail-over command WC-273
x25 hic command WC-267
x25 hoc command WC-267
x25 hold-queue command WC-288
x25 hold-vc-timer command WC-285
x25 host command TC-135
x25 htc command DC-244, WC-267
x25 hunt-group command WC-294
x25 idle command WC-285
x25 ip-precedence command WC-314
x25 ips command WC-271
x25 lic command WC-267
x25 linkrestart command WC-276
x25 loc command WC-267
x25 ltc command WC-267
x25 map accept-reverse command WC-287
x25 map bridge broadcast command BC-36
x25 map bridge command WC-283
x25 map command DC-379, DC-409, WC-278, WC-281, WC-285
x25 map compress command WC-284
x25 map compressedtcp command WC-283
x25 map cug command WC-286
x25 map idle command WC-285
x25 map no-incoming command WC-288
x25 map no-outcoming command WC-288
x25 map nudata command WC-287
x25 map nuid command WC-287
x25 map nvc command WC-285
x25 map packetsize command WC-286
x25 map pad command WC-282
x25 map ppp command DC-241, DC-246, DC-247
x25 map qllc command BC-295, BC-427
x25 map reverse command WC-287
x25 map roa command WC-287
x25 map throughput command WC-287
x25 map transit-delay command WC-287
x25 map windowsize command WC-286
x25 modulo command WC-268
x25 nvc command WC-285
x25 ops command WC-271
x25 pad-access command WC-282
x25 profile command WC-301
x25-profile command WC-301
x25 pvc command WC-278, WC-282, WC-292
x25 pvc interface command WC-291, WC-292, WC-293
x25 pvc qllc command BC-428
x25 retry command WC-315
x25 route command DC-867, WC-290, WC-296
x25 route command wildcard WC-298
x25 routing acknowledge local command WC-269, WC-272
x25 routing command WC-289, WC-293, WC-301
x25 routing tcp-use-if-defs command WC-294
x25 subscribe cug-service command WC-308, WC-309
x25 subscribe flow-control command WC-270, WC-272
x25 subscribe local-cug command WC-308, WC-309
x25 subscribe packetsize command WC-270
x25 subscribe windowsize command WC-270
x25 suppress-called-address command WC-276
x25 suppress-calling-address command WC-276
x25 t10 command WC-274
x25 t11 command WC-274
x25 t12 command WC-274
x25 t13 command WC-274
x25 t20 command WC-274
x25 t21 command WC-274
x25 t22 command WC-274
x25 t23 command WC-274
x25 use-source-address command WC-276
x25 win command DC-244, WC-271
x25 wout command DC-244, WC-271
x28 escape command TC-100
x28 nuicud command TC-100
x28 profile command TC-100
x28 reverse command TC-100
x28 verbose command TC-100
x29 access-list command TC-134, WC-318
x29 profile command TC-114, TC-134, WC-319
x3 command TC-97
X3T9.5 specification IC-54
Xauth
See IKE, extended authentication
XCA (External Communications Adapter)
CSNA support BC-247, BC-674, BC-678, BC-679to BC-690
major node, CSNA (example) BC-679
XDMCP (X Display Manager Control Protocol)
XRemote, starting TC-55
XID (exchange of identification)
LLC2
retry configuration BC-397
transmission
(caution) 1
transmission configuration BC-397
SDLC configuration BC-403
Xmodem
description FC-202
file transfer
line configuration, enabling FC-80
file transfer (example) FC-204
system image
recovering (example) FC-204
XNS (Xerox Network Systems)
access control P3C-124to P3C-127
access lists
3Com (example) P3C-134
extended P3C-125
filters P3C-126
standard P3C-124
addresses P3C-122
broadcasts
all-nets broadcast P3C-129
directed broadcast P3C-129
forwarding P3C-130
local broadcast P3C-129
messages, controlling P3C-129
processing P3C-130
Cisco's implementation P3C-4
concurrent routing and bridging P3C-124
configuration
tasks P3C-123
DDR, configuring DC-359
dialer profiles, configuring DC-434
encapsulation on Token Ring interfaces P3C-124
cache entries, displaying P3C-132
filters
interface, applying to P3C-126, P3C-127
routing table P3C-125, P3C-127
types (table) P3C-125
flooding P3C-130
behavior, defining P3C-131
configuring P3C-131
helpering P3C-130
(example) P3C-135
configuration P3C-130
IDP P2C-4
interfaces, displaying status P3C-132
in VLANs XC-321
LANE support XC-373
metrics, routing P3C-5, P3C-122
monitoring tasks P3C-132
multicast address, SMDS address mapping to WC-247
Net/One routing
emulation mode P3C-122
task list P3C-124
Net/One routing, enabling (example) P3C-133
network
connectivity
testing 1
monitoring P3C-132
number P3C-122
over ISL encapsulation XC-335, XC-336, XC-337
paths, setting maximum P3C-128
RIP updates
delay between P3C-128
Net/One routers P3C-121
timers (example) P3C-134
timers, setting P3C-128
routing
over LANs P3C-5
over WANs P3C-5
routing, enabling P3C-124
routing metrics P2C-4
routing table entries
adding P3C-127
displaying P3C-132
SMDS, configuring WC-249
standard routing, enabling
(example) P3C-133
commands P3C-123
static routes, adding to routing table P3C-128
Token Ring interface encapsulation P3C-124
traffic statistics, displaying P3C-132
TR LANE support XC-373
xns access-group command P3C-125, P3C-126
xns encapsulation command P3C-124
xns flood broadcast allnets command P3C-131
xns flood broadcast net-zero command P3C-131
xns flood specific allnets command P3C-131
xns forward-protocol command P3C-130
xns hear-rip command P3C-124
xns helper-address command P3C-130
xns input-network-filter command P3C-125, P3C-127
xns maximum-paths command P3C-129
xns network command P3C-123, XC-336, XC-338
xns output-network-filter command P3C-125, P3C-127
xns route-cache command P3C-132, XC-17
xns route command P3C-128
xns router-filter command P3C-125, P3C-127
xns routing command P3C-123, XC-336, XC-337, XC-338
xns ub-emulation command P3C-124
xns update-time command P3C-128
XOT (X.25 over TCP)
See also X.25, over TCP (XOT)
destination WC-291
flow control values, modifying WC-294
keepalive options WC-291
PVC, resetting WC-319
See PAD, XOT
SVC, clearing WC-319
X.25 connections (example) WC-326
XRemote
automatic session startup TC-55to TC-56
clients, starting TC-57
configuration file (example) TC-60
configuring TC-53
connections TC-59
host computer TC-57
manual TC-56
monitoring TC-59
connections to servers TC-58to TC-59
connectivity TC-52
EXEC prompt TC-57
font loader
protocol translator TC-54
retries, configuring TC-53
fonts
DECwindows TC-54
remote access TC-52
internal buffer size, configuring TC-53
manual session startup TC-56
modem setup TC-53
monitoring TC-53
connections TC-59
nonresident fonts, access TC-54
overview TC-51
reenabling manually TC-58
server connections TC-55
sessions
between servers TC-58
stopping TC-56
traffic, monitoring TC-59
X display location, configuring TC-57
X terminal parameter setup TC-53
xremote command TC-56
xremote lat command TC-54, TC-55
xremote tftp buffersize command TC-53
xremote tftp host command TC-53
xremote tftp retries command TC-53
xremote xdm command TC-55
XTagATM
bandwidth, specifying XC-128
definition XC-118
X Window System
client server TC-51
description TC-51
display location, configuring TC-57
display server TC-51
Y
Ymodem description FC-202
Z
ZIP (Zone Information Protocol)
definition P2C-3
query interval P2C-43
reply filters P2C-25
zone bandwidth, configuring the gatekeeper VC-763
zone local command VC-304, VC-309, VC-313, VC-321, VC-323
zone prefix command VC-305, VC-310, VC-322, VC-324, VC-326
zone remote command VC-308, VC-310, VC-321
zones
accessing VC-330
gatekeeper VC-202
local gatekeeper VC-330
remote gatekeeper VC-330
See also AppleTalk, zones
zone subnet command VC-306
Posted: Tue May 24 18:35:11 PDT 2005
All contents are Copyright © 1992--2005 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.