|
|
This guide explains how to use TrueView Catalyst 1600 Manager, a management application for the Catalyst 1600 Token Ring switch, to manage the Catalyst 1600 Token Ring switch and control broadcast frames on the network.
For information about the TrueView network management platform, refer to TrueView Applications Installation and User Guide.
This guide is for network administrators. It assumes you are familiar with:
This guide is organized as follows:
| Chapter 1 | Describes the TrueView network management platform, and the TrueView Catalyst 1600 Manager management application. |
| Chapter 2 | Explains how to add devices to manage with TrueView Catalyst 1600 Manager and explains how to enter the password to configure a Catalyst 1600 Token Ring switch. |
| Chapter 3 | Explains how to use TrueView Catalyst 1600 Manager to monitor and manage Catalyst 1600 devices and how to download boot code and run-time microcode to devices on the network from the management station. |
| Chapter 4 | Explains how to use TrueView Catalyst 1600 Manager to monitor and manage ports on the Catalyst 1600 Token Ring switch. |
| Chapter 5 | Explains how to use TrueView Catalyst 1600 Manager to configure source route bridging and the spanning tree algorithm. |
| Chapter 6 | Explains how to use TrueView Catalyst 1600 Manager to create and configure virtual LANs. |
| Appendix A | Explains how TrueView Catalyst 1600 Manager communicates with Catalyst 1600 devices over the Simple Network Management Protocol (SNMP). |
| Appendix B | Explains the concept of virtual local-area networks (LANs), and provides examples of virtual LAN configurations. |
| Appendix C | Explains technical terms that appear in the document. |
The following documents contain related information:
This guide contains the following specific terms:
| Catalyst 1600 | The Catalyst 1600 Token Ring switch. |
| Option button | A button on the screen, which is either selected or clear, that you click on to indicate an option. If an option button has a black center, that indicates it is selected. If an option button has a white center, that indicates it is not selected. You can only select one option button in a group of option buttons. |
| Check box | A box on the screen, which is typically selected or clear, that you click on to indicate an option. An 'X' in a check box indicates it is selected. You can select a check box without affecting other check boxes. |
To find out the system requirements to run TrueView Catalyst 1600 Manager under TrueView, refer to the TrueView Applications Installation and User Guide.
If any of the items you ordered are missing, please contact your supplier immediately.
Catalyst 1600 Manager includes:
|
|