Cisco 3200 Series Wireless MIC Software Configuration Guide

Example procedures for using IOS commands to configure the Cisco 3200 Wireless Mobile Interface Card (WMIC).p>

• Whole-book PDF of the Cisco 3200 Series Wireless MIC Software Configuration Guide -
  A whole-book PDF of the Cisco 3200 Series Wireless Mobile Interface Card software configuration guide.

• Index for the Cisco 3200 Series Wireless MIC Software Configuration Guide
  Index for the Cisco 3200 Series Wireless MIC Software Configuration Guide

• Preface
  Preface

• Overview
  Overview of the Cisco 3200 Wireless Mobile Interface Card configurations described in this guide.

• Configuring the WMIC for the First Time
  How to configure the basic settings on the WMIC for the first time. This includes connecting to the WMIC, assigning an IP address, basic security, and so forth.

• Configuring Radio Settings
  Describes how to configure radio settings, such as disabling and enabling the radio interface, configuring the role, configuring data rates.

• Administering the WMIC
  Describes how to administer your WMIC, preventing unauthorized access.

• Configuring SSIDs
  Describes how to configure a service set identifier (SSID).

• Configuring Multiple Client Profiles
  Explains how to figure multiple client profiles on the Cisco 3200 WMIC

• Configuring Spanning Tree Protocol
  Configure Spanning Tree Protocol (STP) on the WMIC.

• Configuring WEP and WEP Features
  Configuring WEP and WEP features on the WMIC.

• Configuring Authentication Types
  Configure authentication types on the WMIC,

• Configuring WDS, Fast Secure Roaming, and Radio Management
  Configuring wireless domain services (WDS), Fast Secure Roaming, and Radio Management, sending reports to the WDS access point on potential rogue access points, associated clients, client signal strengths, and the radio signals from other access points.

• Configuring VLANs
  Configure your WMIC to operate with the VLANs set on your wired LAN,

• Configuring QoS in a Wireless Environment
  Configure quality of service (QoS) on your WMIC to provide preferential treatment to certain traffic at the expense of other traffic.

• Configuring Filters
  Configure and manage MAC address, IP, and Ethertype filters on the WMIC using the web-browser interface.

• Configuring CDP
  Configure Cisco Discovery Protocol (CDP) on the WMIC.

• Configuring SNMP
  Configure the Simple Network Management Protocol (SNMP) on your WMIC.

• Managing Firmware and Configurations
  How to manipulate the Flash file system, how to copy configuration files, and how to archive (upload and download) software images.

• Configuring System Message Logging
  Configure system message logging on the WMIC.

• Wireless Device Troubleshooting
  This chapter provides troubleshooting procedures for basic problems with the wireless device.

• Using the Command-Line Interface
  Using the command-line interface to configure the Cisco 3200 Wireless Mobile Interface Card.

• Channels and Antenna Settings
  The IEEE 802.11g (2.4-GHz) channels, maximum power levels, and antenna gains supported by the world’s regulatory domains.

• Protocol Filters
  Some of the protocols that you can filter on the WMIC: Table E-1, Ethertype Protocols, IP Protocols, IP Port Protocols.

• Supported MIBs
  The Simple Network Management Protocol (SNMP) Management Information Bases (MIBs) that the WMIC supports.

• Glossary
  Glossary