This document describes the initial site preparation, hardware installation, and troubleshooting of the Cisco AS5800 universal access server (Cisco AS5800), which consists of the Cisco 5814 dial shelf and the Cisco 7206 router shelf. Also included is information describing the hardware components, including dial shelf cards, dial shelf controller cards, blower assembly, maintenance monitors, power supplies, and cables.
This publication is designed for the system technician who is responsible for installing the Cisco AS5800. The system technician should be familiar with electronic circuitry and wiring practices and have experience as an electronic or electromechanical technician. It is assumed that the system technician has experience with the installation of high-end networking equipment.
This publication does not include software configuration instructions for the Cisco AS5800. For software configuration, refer to the Cisco AS5800 Universal Access Server Software Installation and Configuration Guide that shipped with your access server. The Cisco AS5800 Universal Access Server Software Installation and Configuration Guide will be replaced by the Cisco AS5800 Universal Access Server Operation, Administration, Maintenance, and Provisioning Guide, available later this year.
This publication does not address the specific dial shelf cards for the Cisco AS5800. For specific information about the dial shelf cards, refer to the Cisco AS5800 Universal Access Server Dial Shelf Card Guide that shipped with your access server.
For a complete description of Cisco IOS software, refer to the Cisco IOS configuration guides and command references and to the documents listed in the section "Related Documentation" in this chapter.
The Cisco AS5800 Universal Access Server Hardware Installation Guide is organized as follows:
"Cisco AS5800 Product Overview," provides an overview of the access server, describes its features, and lists its physical specifications.
"Preparing for Installation," includes safety recommendations, site preparation instructions, and instructions for preparing the Cisco 5814 dial shelf for rack mounting.
"Installing the Cisco AS5800," includes step-by-step instructions for rack-mounting the access server in a standard 19-in. 4-post rack and standard telco rack.
This publication uses several formatting conventions to convey instructions and information.
Screen displays use the following convention:
The caret symbol represents the control key. For example, the key combination ^D in a screen display means that you hold down the Control key while you press the D key.
Command descriptions use these conventions:
Commands and keywords are in boldface font.
Variables for which you supply values are in italic font.
Elements in square brackets ([ ]) are optional.
Alternative but required keywords are grouped in braces ({ }) and are separated by a vertical bar ( | ).
Examples use these conventions:
Terminal sessions are in screen font.
Information you enter is in boldface screen font.
Nonprinting characters are shown in angle brackets (< >).
Information displayed on the screen is in screen font, with default responses in square brackets ([ ]).
Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.
Caution
Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.
TimeSaver Means the action described saves time. You can save time by performing the action described in the paragraph.
Tips
Means the following information might help you solve a problem.
Safety warnings appear throughout this publication in procedures that, if performed incorrectly, might harm you. A warning symbol precedes each warning statement. To see translations of safety warnings pertaining to the Cisco AS5800, refer to the Regulatory Compliance and Safety Information document that shipped with your system.
Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van standaard maatregelen om ongelukken te voorkomen. Voor vertalingen van de waarschuwingen die in deze publicatie verschijnen, kunt u het document Regulatory Compliance and Safety Information (Informatie over naleving van veiligheids- en andere voorschriften) raadplegen dat bij dit toestel is ingesloten.
Varoitus Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä vaaroista ja tavanomaisista onnettomuuksien ehkäisykeinoista. Tässä julkaisussa esiintyvien varoitusten käännökset löydät laitteen mukana olevasta Regulatory Compliance and Safety Information -kirjasesta (määräysten noudattaminen ja tietoa turvallisuudesta).
Attention Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant causer des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers posés par les circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions d'avertissements figurant dans cette publication, consultez le document Regulatory Compliance and Safety Information (Conformité aux règlements et consignes de sécurité) qui accompagne cet appareil.
Warnung Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu einer Körperverletzung führen könnte. Bevor Sie mit der Arbeit an irgendeinem Gerät beginnen, seien Sie sich der mit elektrischen Stromkreisen verbundenen Gefahren und der Standardpraktiken zur Vermeidung von Unfällen bewußt. Übersetzungen der in dieser Veröffentlichung enthaltenen Warnhinweise finden Sie im Dokument Regulatory Compliance and Safety Information (Informationen zu behördlichen Vorschriften und Sicherheit), das zusammen mit diesem Gerät geliefert wurde.
Avvertenza Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di lavorare su qualsiasi apparecchiatura, occorre conoscere i pericoli relativi ai circuiti elettrici ed essere al corrente delle pratiche standard per la prevenzione di incidenti. La traduzione delle avvertenze riportate in questa pubblicazione si trova nel documento Regulatory Compliance and Safety Information (Conformità alle norme e informazioni sulla sicurezza) che accompagna questo dispositivo.
Advarsel Dette varselsymbolet betyr fare. Du befinner deg i en situasjon som kan føre til personskade. Før du utfører arbeid på utstyr, må du vare oppmerksom på de faremomentene som elektriske kretser innebærer, samt gjøre deg kjent med vanlig praksis når det gjelder å unngå ulykker. Hvis du vil se oversettelser av de advarslene som finnes i denne publikasjonen, kan du se i dokumentet Regulatory Compliance and Safety Information (Overholdelse av forskrifter og sikkerhetsinformasjon) som ble levert med denne enheten.
Aviso Este símbolo de aviso indica perigo. Encontra-se numa situação que lhe poderá causar danos físicos. Antes de começar a trabalhar com qualquer equipamento, familiarize-se com os perigos relacionados com circuitos eléctricos, e com quaisquer práticas comuns que possam prevenir possíveis acidentes. Para ver as traduções dos avisos que constam desta publicação, consulte o documento Regulatory Compliance and Safety Information (Informação de Segurança e Disposições Reguladoras) que acompanha este dispositivo.
¡Advertencia! Este símbolo de aviso significa peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considerar los riesgos que entraña la corriente eléctrica y familiarizarse con los procedimientos estándar de prevención de accidentes. Para ver una traducción de las advertencias que aparecen en esta publicación, consultar el documento titulado Regulatory Compliance and Safety Information (Información sobre seguridad y conformidad con las disposiciones reglamentarias) que se acompaña con este dispositivo.
Varning! Denna varningssymbol signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanligt förfarande för att förebygga skador. Se förklaringar av de varningar som förkommer i denna publikation i dokumentet Regulatory Compliance and Safety Information (Efterrättelse av föreskrifter och säkerhetsinformation), vilket medföljer denna anordning.
The following acronyms, initialisms, and terms identify the Cisco AS5800 system components and features:
Dial shelf controller (DSC) cardA printed circuit board that connects to the dial shelf backplane and serves as the interface between the dial shelf and the router shelf. The dial shelf controller card also supports environmental monitoring and board initialization at power-up.
CPU coreCommon CPU circuitry shared by all cards within the dial shelf.
The Cisco IOS software running your Cisco AS5800 includes extensive features and functionality. For information regarding the Cisco AS5800 that is beyond the scope of this document or for additional information, use the following resources:
Cisco AS5800 Universal Access Server Hardware Installation Guide (this book)
Cisco AS5800 Universal Access Server Dial Shelf Card Guide
Cisco AS5800 Universal Access Server Software Installation and Configuration Guide (to be replaced later this year by the Cisco AS5800 Universal Access Server Operations, Administration, Maintenance, and Provisioning Guide)
Cisco AS5800 Universal Access Server Regulatory Compliance and Safety Information
Cisco 7206 router shelf
Cisco 7206 Installation and Configuration Guide
Cisco 7200 Series Port Adapter Hardware Configuration Guidelines
Regulatory Compliance and Safety Information for the Cisco 7200 Series Routers
Configuration notes, updates, and release notes
Cisco 5814 dial shelf
Configuration notes, updates, and release notes
System controller
Read Me First
Cisco 3640 System Controller Installation and Configuration Guide
Cisco 3640 Router Installation and Configuration Guide
For information regarding the Cisco AS5800 that is beyond the scope of this document or for additional information, use the following resources:
For Cisco AS5800 software configuration, refer to the Cisco AS5800 Universal Access Server Software Installation and Configuration Guide that shipped with your system. The Cisco AS5800 Universal Access Server Software Installation and Configuration Guide will be replaced by the Cisco AS5800 Universal Access Server Operation, Administration, Maintenance, and Provisioning Guide, available later this year.
For information about the trunk cards, modem cards, and Voice over IP cards used in the Cisco 5814 dial shelf, refer to the Cisco AS5800 Universal Access Server Dial Shelf Card Guide that shipped with your system.
For international agency compliance, safety, and statutory information for wide-area network (WAN) interfaces for the Cisco AS5800, refer to Cisco AS5800 Universal Access Server Regulatory Compliance and Safety Information that shipped with your system.
To obtain general information about documentation, refer to the section "Cisco Connection Online," or call customer service at 800 553-6387 or 408 526-7208. Customer service hours are 5:00 a.m. to 6:00 p.m., Pacific time, Monday through Friday (excluding Cisco-observed holidays). You can also send e-mail to cs-rep@cisco.com, or you can refer to the Cisco Information Packet that shipped with your system.
Cisco Documentation CD-ROM package
Cisco documentation and additional literature are available in a CD-ROM package that ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly; therefore, it might be more current than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback on the toolbar, and then select Documentation. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.
For additional Cisco IOS software information, refer to the following modular configuration and modular command reference publications, as appropriate for your configuration:
Configuration Fundamentals Configuration Guide
Configuration Fundamentals Command Reference
Dial Solutions Configuration Guide
Wide-Area Networking Configuration Guide
Wide-Area Networking Command Reference
Network Protocols Configuration Guide
Network Protocols Command Reference
Configuration Builder Getting Started Guide
Troubleshooting Internetworking Systems
Debug Command Reference
System Error Messages
Cisco IOS Software Command Summary
Cisco Management Information Base (MIB) User Quick Reference
Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional content and services.
Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.
CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneouslya character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.
Modem: From North America, 408 526-8070; from Europe, 33 1 64 46 40 82. Use the following terminal settings: VT100 emulation; databits: 8; parity: none; stop bits: 1; and connection rates up to 28.8 kbps.
For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.
Note If you are a network administrator and need personal technical assistance with a Cisco product that is under warranty or covered by a maintenance contract, contact Cisco's Technical Assistance Center (TAC) at 800 553-2447, 408 526-7209, or tac@cisco.com. To obtain general information about Cisco Systems, Cisco products, or upgrades, contact 800 553-6387, 408 526-7208, or cs-rep@cisco.com.