PBX Interoperability Notes

• Cisco CallManager Release 4.0 - PBX Interoperability:Lucent/Avaya Definity G3si PBX Using a Cisco 6608 Gateway with T1 QSIG

• Cisco CallManager 4.0 - PBX Interoperability: Alcatel 4400 PBX with Cisco Catalyst 6608 Voice Gateway with E1 PRI

• Mitel 3300 ICP Release 3.3 using T1 PRI DMS-100 to Cisco Unified CallManager 4.0

• Cisco CallManager Release 4.0-PBX Interoperability: Alcatel 4400 with Cisco Catalyst 6000 Series Switch using E1 QSIG

• Cisco Unified CallManager 4.0 - PBX Interoperability: Mitel 3300 PBX
  With Cisco 6608 using T1 QSIG as MGCP Gateway

• Nortel Meridian Opt11C Rel25 PBX with a Cisco 6608 Gateway using T1 QSIG as an MGCP Gateway
  With Cisco Unified Communications Manager Release 4.0

• Cisco Unified CallManager Release 4.0-PBX Interoperability:
  Nortel Meridian O11c with Cisco 6608 using T1 PRI DMS-100

• Cisco Unified CallManager Release 4.0-PBX Interoperability:
  Siemens Hicom 330E using a Cisco 6608 Gateway with T1 PRI as MGCP Gateway

• Cisco Unified Communications Manager Release 4.0-PBX Interoperability:
  Siemens Hicom 330E with Cisco Catalyst 6608 Switch using E1 PRI Euro with MGCP

• Siemens HiPath 4000 Release 1 PBX to Cisco 6608 Using E1 Q.SIG
  With Cisco Unified CallManager Release 4.0

• Cisco CallManager Release 4.0-PBX Interoperability: Cisco 3660 Multiservice Platform to an Etradeal Switch using E1 Q.SIG

• Nortel Meridian 1 Opt 11C using a Cisco Catalyst 6608 Gateway with T1 QSIG as MGCP with Cisco Unified CommunicationsManager 4.0

• Nortel Meridian 1 Release 25 PBX using 6608-E1 QSIG with MGCP
  With Cisco Unified CallManager 4.0

• Cisco Unified CallManager 4.0-PBX Interoperability:
  Ericsson MD-110 Release BC11 PBX to a Cisco 6608 Gateway using E1 Q.SIG with MGCP

• Avaya Definity G3si MV1.3 using E1 QSIG to Cisco Unified CallManager 4.0

• Siemens Hicom 300 E CS Rel6.6 Using Cisco Catalyst 6608-T1 QSIG with MGCP
  With Cisco Unified CallManager Release 4.0

• Siemens Hicom 300 E Release 3.1 PBX Using 6608-E1 QSIG as MGCP Gateway
  With Cisco Unified CallManager Release 4.0

• Cisco CallManager 4.01-PBX Interoperability: Avaya to a Cisco 3745 GW Using NM-HDV2-T1 CAS, E&M, Wink-Start with MGCP

• Cisco Unified CallManager 4.01-PBX Interoperability: Nortel 1 to a Cisco 2611XM Gateway
  Using NM-HDV2-T1 CAS, E&M Wink-Start with MGCP

• Octel Model 250 Serial MCI with NEC 2400 IPX Release 15 to a Cisco Catalyst 6500 using 6608 T1-CAS and Cisco VG248 with MGCP
  With Cisco Unified CallManager Release 4.01