|
|
Use the line card group to assign a name, default inpulse rule, and class of service (COS) to individual ports on a Line Test Card-8 (LTC-8). This group consists of two tables:
When configuring a port, assign a name, a default inpulse rule, and a class of service (COS) to the port.
The line card table contains a list of the line cards available. Cards can be added, deleted, configured, and modified. The objects within the line card table identify the different attributes on that particular card. For further information on line cards, refer to the Cisco VCO/4K Card Technical Descriptions.
{lc 1}
Description
Contains a list of the line cards.
Object Identifier
1.3.6.1.4.1.886.1.2.1
Data Type
Sequence of LcEntry
Access Policy
Not accessible
Status
Mandatory
{lcTable 1}
Description
Each entry corresponds to a line card in the system.
Object Identifier
1.3.6.1.4.1.886.1.2.1.1
Data Type
CardIndex
Access Policy
Not accessible
Status
Mandatory
Index
{lcIndex}
Sequence
lcIndex | CardIndex |
lcRack | Integer |
lcLevel | Integer |
lcSlot | Integer |
lcStatus | Integer |
lcUnusedPorts | Integer |
lcType | Integer |
lcRevVer | DisplayString |
lcPhyAdd | Integer |
lcAlarm | Integer |
lcErrorStatus | Integer |
lcOwnerString | OwnerString |
lcEntryStatus | EntryStatus |
{lcEntry 1}
Description
Identifies an object in the line card table. The object contains the physical location (hardware address) of the line card. The object lists the rack (R), level (L), and slot (S) where the card resides. See the "Card Index" section to determine the index value.
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.1
Data Type
CardIndex
Access Policy
Read only
Status
Mandatory
{lcEntry 2}
Description
The rack (R) where the card resides.
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.2
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{lcEntry 3}
Description
The level (L) where the card resides.
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.3
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{lcEntry 4}
Description
The slot (S) where the card resides.
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.4
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{1cEntry 5}
Description
Indicates the current status of the card.
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.5
Data Type
Integer. Possible values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | active | Ports on this card can be involved in active calls and can be allocated to new calls. |
2 | maintenance | One or more ports on this card might be involved in active calls. No ports are allocated to new calls. |
3 | diagnostics | No ports on this card are involved in calls or allocated to new calls. |
4 | outOfService | No ports on this card are involved in active calls. No ports are allocated to new calls. |
Access Policy
Read-write
Status
Mandatory
{lcEntry 6}
Description
Indicates the number of ports not currently active on this card. For multispan cards, this object indicates the number of ports not currently active on individual spans. Valid only for network interface and internal service circuit ports.
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.6
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{lcEntry 7}
Description
Indicates the card type. In this table the card type is a Subscriber Line Interface Card (SLIC). The value is always 1 for SLIC cards.
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.7
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{lcEntry 8}
Description
Version and revision level of the firmware installed on this card. Use this field to verify the firmware versions you installed for the network interface and service circuit cards are at the current level.
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.8
Data Type
DisplayString. Length is from 1 to 5 alphanumeric characters.
Access Policy
Read only
Status
Mandatory
{lcEntry 9}
Description
Physical address of this card (assigned by the system).
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.9
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{lcEntry 10}
Description
Contains the alarms active on this card.
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.10
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String |
|---|---|
1 | cardFailureMinor |
2 | portFailureMinor |
3 | cardAndPortFailureMinor |
Access Policy
Read only
Status
Mandatory
{lcEntry 11}
Description
Registers the last error that occurred on this card. For a list of card error messages, see "Card Error Messages".
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.11
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{lcEntry 12}
Description
The entity that configured this object and is therefore using the resources assigned to it.
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.12
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{lcEntry 13}
Description
The status of this line card entry.
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.13
Data Type
EntryStatus
Access Policy
Read-write
Status
Mandatory
{lcEntry 14}
Description
Version/revision of the card download file.
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.14
Data Type
DisplayString (size 1...4)
Access Policy
Read only
Status
Mandatory
{lcEntry 15}
Description
The upgrade state of this line card entry.
Object Identifier
1.3.6.1.4.1.886.1.2.1.1.13
Data Type
UpgradeState
Access Policy
Read only
Status
Mandatory
{lc 2}
Description
The time, displayed in hundredths of a second, since the line card table was last modified. Helps application developers determine the polling of the agent parameters.
Object Identifier
1.3.6.1.4.1.886.1.2.2
Data Type
TimeTicks
Access Policy
Read only
Status
Mandatory
Use the line card port configuration to assign a name, a hardware type, a default inpulse rule, and a class of service (COS) to individual ports on a line card.
For more information on configuring line ports, refer to the Cisco VCO/4K System Administrator's Guide.
{lc 4}
Description
A list of the port entries on each line card.
Object Identifier
1.3.6.1.4.1.886.1.2.4
Data Type
Sequence of LcPortEntry
Access Policy
Not accessible
Status
Mandatory
{lcPortTable 1}
Description
Contains objects belonging to a particular port.
Object Identifier
1.3.6.1.4.1.886.1.2.4.1
Data Type
LcPortEntry
Access Policy
Not accessible
Status
Mandatory
Index
{lcIndex, lcPortIndex}
Sequence
lcPortIndex | Integer |
lcPortState | Integer |
lcPortName | DisplayString |
lcPortCos | Integer |
lcPortMajorState | PortMajorState |
lcPortSuppState | PortSuppState |
lcPortAddress | Integer |
lcInpulseRuleIndex | Integer |
lcResGroupIndex | Integer |
lcResGroupPosition | Integer |
lcPortErrorStatus | Integer |
lcPortOwnerString | OwnerString |
lcPortEntryStatus | PortEntryStatus |
{lcPortEntry 1}
Description
Indicates the port number on the card.
Object Identifier
1.3.6.1.4.1.886.1.2.4.1.1
Data Type
Integer (1 to 8). There are eight ports on a line card.
Access Policy
Read only
Status
Mandatory
{lcPortEntry 2}
Description
Contains the state of the port. The port state can be active (1) or inactive (2).
 |
Note Always modify the state of ports one at a time. That is, the EntryStatus object must be set to valid after every SNMP_SET command on this object. |
Object Identifier
1.3.6.1.4.1.886.1.2.4.1.2
Data Type
Integer. The possible values are 1 (active) and 2 (inactive).
Access Policy
Read-write
Status
Mandatory
{lcPortEntry 3}
Description
Optional database object for identifying individual circuits. When used, each port name should be unique and helpful in describing for what the port is used.
Object Identifier
1.3.6.1.4.1.886.1.2.4.1.3
Data Type
DisplayString. This field accepts up to 8 upper- or lowercase alphanumeric characters.
Access Policy
Read-write
Status
Optional
{lcPortEntry 4}
Description
Determines the software operating characteristics for this port. Ports on the same card can have different COS values.
Object Identifier
1.3.6.1.4.1.886.1.2.4.1.4
Data Type
Integer. The possible values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | o | Originating—Calls originating from the system. Outgoing calls are initiated by the host command. |
2 | t | Terminating—Calls terminating at the system. Incoming calls are initiated by action outside the system or forced by the host command. |
3 | w2 | Two-Way—Calls originating from the system or calls terminating at the system. Outgoing calls are initiated by the host command. Incoming calls are initiated by outside actions. |
4 | oa | Always Off Hook and Originating—Calls originating from the system. Port goes off hook at system reset and remains off hook. Outgoing calls are initiated by the host command. |
5 | ta | Always Off Hook and Terminating—Calls terminating at the system. Port goes off hook at system reset and remains off hook. Incoming calls are initiated by outside actions or forced by the host command. |
6 | a2 | Always Off Hook and Two-Way—Calls originating from the system or calls terminating at the system. Port goes off hook at system reset and remains off hook. Outgoing calls are initiated by the host command, incoming calls are initiated by outside actions or forced by the host command. |
Access Policy
Read-write
Status
Mandatory
{lcPortEntry 5}
Description
The major state of the port.
Object Identifier
1.3.6.1.4.1.886.1.2.4.1.5
Data Type
PortMajorState
Access Policy
Read only
Status
Mandatory
{lcPortEntry 6}
Description
The supplementary state of the port.
Object Identifier
1.3.6.1.4.1.886.1.2.4.1.6
Data Type
PortSuppState
Access Policy
Read only
Status
Mandatory
{lcPortEntry 7}
Description
Specifies the software address (hexadecimal identifier) of the port for which data is displayed. The port can also be specified by the hardware address.
Object Identifier
1.3.6.1.4.1.886.1.2.4.1.7
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{lcPortEntry 8}
Description
A foreign key corresponding to the inpulseRuleIndex in the inpulseTable. Access this object when assigning a particular inpulse rule to a port.
Determines the inpulse rule processed when the port goes off hook. Use default inpulse rules for incoming ports only (Class of Service = T, W2, AT, or A2). The inpulse rule chosen must be defined from the control console or through the objects in the inpulseRuleTable.
Object Identifier
1.3.6.1.4.1.886.1.2.4.1.8
Data Type
Integer. The possible values range from 0 to 30. Default is 0.
Access Policy
Read-write
Status
Mandatory
{lcPortEntry 9}
Description
A foreign key corresponding to the resGroupIndex (ID 1.3.6.1.4.1.886.1.9.1.1.1) in the resGroupTable.
Indicates the number of the resource group to which this port belongs. If no resource group is assigned, the value is zero (0).
Change this attribute by setting the EntryStatus and the resGroupTable objects to underModification (3).
Object Identifier
1.3.6.1.4.1.886.1.2.4.1.9
Data Type
Integer. The possible values range from 0 to 63.
Access Policy
Read-write
Status
Mandatory
{lcPortEntry 10}
Description
Specifies the position of the port in the assigned resource group.
Object Identifier
1.3.6.1.4.1.886.1.2.4.1.10
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{lcPortEntry 11}
Description
Registers the last error that occurred on this port.
Object Identifier
1.3.6.1.4.1.886.1.2.4.1.11
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{lcPortEntry 12}
Description
The entity that configured this object and is therefore using the assigned resources.
Object Identifier
1.3.6.1.4.1.886.1.2.4.1.12
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{lcPortEntry 13}
Description
The status of the table object.
Object Identifier
1.3.6.1.4.1.886.1.2.4.1.13
Data Type
PortEntryStatus
Access Policy
Read-write
Status
Mandatory
{lc 5}
Description
The time, displayed in hundredths of a second, since the beginning of the time that the line card port table was last modified. Helps NMS application developers determine the polling of the agent parameters.
Object Identifier
1.3.6.1.4.1.886.1.2.5
Data Type
TimeTicks
Access Policy
Read only
Status
Mandatory
Posted: Sat Sep 28 11:08:25 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.