|
|
System Configuration refers to the group of functions used to configure system interaction with peripheral equipment, storage devices, and host computers. These functions are accessed from the system configuration group and consist of the following types of objects:
System configuration utilities enable you to do the following:
For further information on the system configuration, refer to the Cisco VCO/4K System Administrator's Guide.
Use the objects in this table to create or change system passwords and set access levels for up to 16 system users. Each system user is identified by a unique username, an alphanumeric password and an access level. The ability to update this configuration information is limited by a user's access level. Access levels determine the user's ability to modify screen information and update the system database. For further information on password configuration, refer to the Cisco VCO/4K System Administrator's Guide.
{config 1}
Description
Table of the authorized users and their password.
Object Identifier
1.3.6.1.4.1.886.1.1.1
Data Type
Sequence of PasswdEntry
Access Policy
Not accessible
Status
Mandatory
{passwdTable 1}
Description
An index into the password (passwd) table.
Object Identifier
1.3.6.1.4.1.886.1.1.1.1
Data Type
PasswdEntry
Access Policy
Not accessible
Status
Mandatory
Index
{passwdIndex}
Sequence
passwdIndex | Integer |
userName | DisplayString |
accessLevel | Integer |
passwdString | DisplayString |
passwdErrorStatus | Integer |
passwdOwnerString | OwnerString |
passwdEntryStatus | EntryStatus |
{passwdEntry 1}
Description
Contains the user's password. You must add users to the password table sequentially.
Object Identifier
1.3.6.1.4.1.886.1.1.1.1.1
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{passwdEntry 2}
Description
The user's name (consists of 3 to 15 upper- and lowercase alphanumeric characters).
Object Identifier
1.3.6.1.4.1.886.1.1.1.1.2
Data Type
DisplayString
Access Policy
Read-write
Status
Mandatory
{passwdEntry 3}
Description
Specifies a user's access level to the information in the database.
Object Identifier
1.3.6.1.4.1.886.1.1.1.1.3
Data Type
Integer. The valid numerical values and their meanings are shown in the following table:
| Value | Meaning |
|---|---|
0 | Read and database update access to all screens |
1 | Varies based on screen access configuration |
2 | Varies based on screen access configuration |
3 | Read access only to all objects |
Access Policy
Read-write
Status
Mandatory
{passwdEntry 4}
Description
Specifies the password associated with the username entered. Issuing an SNMP_GET command on this attribute returns the encoded password.
Object Identifier
1.3.6.1.4.1.886.1.1.1.1.4
Data Type
DisplayString. Length of the user's password is from 4 to 12 upper- and lowercase alphanumeric characters.
Access Policy
Read-write
Status
Mandatory
{passwdEntry 5}
Description
Registers the last error that occurred in this object.
Object Identifier
1.3.6.1.4.1.886.1.1.1.1.5
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String |
|---|---|
4096 | invalidPasswdId |
4097 | passwdNotEmpty |
4098 | invalidPosition |
4099 | passwdAlreadyExists |
Access Policy
Read only
Status
Mandatory
{passwdEntry 6}
Description
The entity that configured this object and is therefore using the resources assigned to it.
Object Identifier
1.3.6.1.4.1.886.1.1.1.1.6
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{passwdEntry 7}
Description
The status of the password object.
Object Identifier
1.3.6.1.4.1.886.1.1.1.1.7
Data Type
EntryStatus
Access Policy
Read-write
Status
Mandatory
{config 2}
Description
The time, displayed in hundredths of a second, since the password table was last modified. Helps NMS application developers determine the polling of the agent parameters.
Object Identifier
1.3.6.1.4.1.886.1.1.2
Data Type
TimeTicks
Access Policy
Read only
Status
Mandatory
Use the objects in this table to create or change system passwords and set access levels for up to 16 system users. Each system user is identified by a unique username, an alphanumeric password and an access level. The ability to update this configuration information is limited by a user's access level. Access levels determine the user's ability to modify screen information and update the system database. For further information on password configuration, refer to the Cisco VCO/4K System Administrator's Guide.
{config 29}
Description
Table of the authorized users and their password.
Data Type
Sequence of FtpPasswdEntry
Access Policy
Not accessible
Status
Mandatory
{ftppwdTable 1}
Description
An entry into the ftp password (passwd) table.
Data Type
FtpPasswdEntry
Access Policy
Not accessible
Status
Mandatory
Index
{ftppwdIndex}
Sequence
ftppwdIndex | INTEGER |
ftpuserName | DisplayString |
ftpaccessLevel | INTEGER |
ftppwdString | DisplayString |
ftppwdErrorStatus | INTEGER |
ftppwdOwnerString | OwnerString |
ftppwdEntryStatus | EntryStatus |
{ftppwdEntry 1}
Description
An index into the ftp passwd table. You must add users to the password table sequentially.
Data Type
INTEGER
Access Policy
Read only
Status
Mandatory
{ftppwdEntry 2}
Description
The user's name consists of 3 to 15 upper- and lowercase alphanumeric characters.
Data Type
DisplayString (SIZE (3..15))
Access Policy
Read-write
Status
Mandatory
{ftppwdEntry 3}
Description
Possible values and their meanings are listed below.
Data Type
Integer. The valid numerical values and their meanings are shown in the following table:
| Value | Meaning |
|---|---|
0 | Read and database update access to all screens |
1 | Varies based on screen access configuration |
2 | Varies based on screen access configuration |
3 | Read access only to all screens |
Access Policy
Read-write
Status
Mandatory
{ftppwdEntry 4}
Description
Specifies the ftp password associated with the username entered. Issuing an SNMP_GET command on this attribute returns the encoded password.
Data Type
DisplayString. Length of the user's password is from 4 to 12 upper- and lowercase alphanumeric characters.
Access Policy
Read-write
Status
Mandatory
{ftppwdEntry 5}
Description
Registers the last error that occurred on this entry.
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String |
|---|---|
6912 | invalidFtpPasswdId |
6913 | ftppwdNotEmpty |
6914 | invalidPosition |
6915 | ftppwdAlreadyExists |
Access Policy
Read only
Status
Mandatory
{ftppwdEntry 6}
Description
The entity that configured this entry.
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{ftppwdEntry 7}
Description
The status of this entry.
Data Type
EntryStatus
Access Policy
Read-write
Status
Mandatory
{config 30}
Description
The time, displayed in hundredths of a second, since the password table was last modified. Helps NMS application developers determine the polling of the agent parameters.
Data Type
TimeTicks
Access Policy
Read only
Status
Mandatory
The master timing link configuration is used to select the system T1 and PRI timing source. You can derive timing from VCO internal clocking or from an incoming T1 or PRI bit stream. If incoming timing is used, the incoming reference is lost and the system automatically tries to synchronize with the internal clock. For further information on the master timing link, refer to the Cisco VCO/4K System Administrator's Guide.
{config 3}
Object Identifier
1.3.6.1.4.1.886.1.1.4
{syncsource 1}
Description
Indicates the source of the reference signal currently used for T1 synchronization.
Object Identifier
1.3.6.1.4.1.886.1.1.4.1
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | internal | Use timing supplied by NBC3 for synchronization. |
2 | external | Use external network synchronization. |
3 | incoming | Use timing from an incoming digital stream. |
Access Policy
Read-write
Status
Mandatory
{syncsource 2}
Description
Specifies the physical address of the card from which clocking is to be derived. The physical address must be that of an online digital trunk card (can be a T1, E1, MVDCT1, or PRI).
Setting the physical address of the primary timing source initializes the secondary timing source. It is not mandatory to set the secondary timing source.
To display the physical address, issue an SNMP_GET command on the card's physical address.
This object can only be set if masTimingSource is set to incoming.
Object Identifier
1.3.6.1.4.1.886.1.1.4.2
Data Type
Integer
Access Policy
Read-write
Status
Mandatory
{syncsource 3}
Description
Specifies the physical address of the card from which clocking is to be derived. The hardware address must be that of an on-line digital trunk card. The card can be a T1, E1, MVDCT1, or PRI.
To display the physical address, issue an SNMP_GET command on the card's physical address.
This object can only be set if masTimingSource is set to incoming and masPrimaryTimingCardPhyAddr is set to a valid value.
Object Identifier
1.3.6.1.4.1.886.1.1.4.3
Data Type
Integer
Access Policy
Read-write
Status
Mandatory
{syncsource 4}
Description
Registers the last error that occurred in this object.
Object Identifier
1.3.6.1.4.1.886.1.1.4.4
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String |
|---|---|
3328 | invalidCardType |
3329 | cardDoesNotExist |
3330 | secondarySameAsPrimary |
3331 | illegalOperation |
Access Policy
Read only
Status
Mandatory
{syncsource 5}
Description
The entity that configured this object and is therefore using the assigned resources.
Object Identifier
1.3.6.1.4.1.886.1.1.4.5
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{syncsource 6}
Description
The status of this table object.
Object Identifier
1.3.6.1.4.1.886.1.1.4.6
Data Type
NonTabEntryStatus
Access Policy
Read-write
Status
Mandatory
Use the clock/calendar configuration to change the system date, time, and day-of-week settings. The VCO clock should be set by the host on a regular basis to ensure that host time and VCO time are synchronized. For further information on the features in the clock/calendar configuration section, refer to the Cisco VCO/4K System Administrator's Guide.
{config 4}
Object Identifier
1.3.6.1.4.1.886.1.1.4
{calendar 1}
Description
The day of the week. For example, Wednesday (4).
Object Identifier
1.3.6.1.4.1.886.1.1.4.1
Data Type
Integer. Valid values are from 1 to 7.
Access Policy
Read only
Status
Mandatory
{calendar 2}
Description
The month of the year. For example, October (10).
Object Identifier
1.3.6.1.4.1.886.1.1.4.2
Data Type
Integer. Valid values are from 1 to 12.
Access Policy
Read-write
Status
Mandatory
{calendar 3}
Description
The date. For example, 19.
Object Identifier
1.3.6.1.4.1.886.1.1.4.3
Data Type
Integer. The months and the corresponding numerical values are shown in the following table:
| Month | Valid Values |
|---|---|
January | 1 to 31 |
February | 1 to 29 |
March | 1 to 31 |
April | 1 to 30 |
May | 1 to 31 |
June | 1 to 30 |
July | 1 to 31 |
August | 1 to 31 |
September | 1 to 30 |
October | 1 to 31 |
November | 1 to 30 |
December | 1 to 31 |
Access Policy
Read-write
Status
Mandatory
{calendar 4}
Description
This object represents the number of the current year minus 1900. For example, the year 1999 is returned as 99.
This object will be deprecated for all software releases following version 5.1(3). When this occurs, the object calendarYear should be used to replace the object sysYear.
Object Identifier
1.3.6.1.4.1.886.1.1.4.4
Data Type
Integer. Valid values are from 91 to 219.
Access Policy
Read-write
Status
Deprecated
{calendar 5}
Description
The hour. For example, the 11 in 11:12:22 (U.S. format).
Object Identifier
1.3.6.1.4.1.886.1.1.4.5
Data Type
Integer. Valid values are 0 to 23.
Access Policy
Read-write
Status
Mandatory
{calendar 6}
Description
The minutes. The 12 in 11:12:22 (U.S. format).
Object Identifier
1.3.6.1.4.1.886.1.1.4.6
Data Type
Integer. Valid values are 0 to 59.
Access Policy
Read-write
Status
Mandatory
{calendar 7}
Description
The seconds. The 22 in 11:12:22 (U.S. format).
Object Identifier
1.3.6.1.4.1.886.1.1.4.7
Data Type
Integer. Valid values are 0 to 59.
Access Policy
Read-write
Status
Mandatory
{calendar 8}
Description
Registers the last error that occurred in this entry.
Object Identifier
1.3.6.1.4.1.886.1.1.4.8
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String |
|---|---|
4608 | invalidYear |
4609 | invalidMonth |
4610 | invalidDate |
4611 | invalidHour |
4612 | invalidMinute |
4613 | invalidSecond |
Access Policy
Read only
Status
Mandatory
{calendar 9}
Description
The entity that configured the object and is therefore using the entry assigned to it.
Object Identifier
1.3.6.1.4.1.886.1.1.4.9
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{calendar 10}
Description
The status of the table entry.
Object Identifier
1.3.6.1.4.1.886.1.1.4.10
Data Type
NonTabEntryStatus
Access Policy
Read-write
Status
Mandatory
{calendar 11}
Description
This object represents an integer value for the current year. Valid values are 1991 through 2119. This object replaces sysYear which uses a different date format.
 |
Note This object will only be available for system software releases subsequent to Version 5.1(3). |
Object Identifier
1.3.6.1.4.1.886.1.1.4.11
Data Type
Integer
Access Policy
Read-write
Status
Mandatory
{hardware 1}
Description
The capacity of the switching bus. B-bus systems allow for 1776 timeslots, C-bus for 3968.
Object Identifier
1.3.6.1.4.1.886.1.1.5.1
Data Type
Integer: 1 for B-bus, 2 for C-bus
Access Policy
Read only
Status
Mandatory
Use the active to standby table to switch the active system to standby status. For further information, refer to the Cisco VCO/4K System Administrator's Guide.
{config 15}
Object Identifier
1.3.6.1.4.1.886.1.1.15
{actsby 1}
Description
Enables you to switch the active system to standby status. This object is only set to standby from the active side. However, it returns the correct status on both standby (1) and active (2) sides.
Object Identifier
1.3.6.1.4.1.886.1.1.15.1
Data Type
Integer. The valid numerical values are 1 (standby) and 2 (active).
Access Policy
Read-write
Status
Mandatory
{actsby 2}
Description
Registers the last error that occurred in this entry.
Object Identifier
1.3.6.1.4.1.886.1.1.15.2
Data Type
Integer. The possible numerical and string values are shown in the following table:
| Value | String |
|---|---|
3584 | cannotSwitchStandby |
3585 | fileSyncNotDone |
3586 | notRedundantSystem |
3587 | invalidValue |
Access Policy
Read only
Status
Mandatory
{actsby 3}
Description
The entity that configured this object and is therefore using the entry assigned to it.
Object Identifier
1.3.6.1.4.1.886.1.1.15.3
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
Use the system shutdown option to reset the system controller from the system administration console. When you select this option, the system closes all open system files, terminates host communication and resets the system controller.
In a nonredundant system, if you select this option, all calls being carried by the system are torn down. If the system is redundant, control is passed to the standby system controller and all stable calls are maintained. Calls that have not reached a stable state are torn down.
{config 16}
Description
Resets the system controller. With this object set, the system closes all open system files, terminates host communication, and resets the system controller.
If you select this option in a nonredundant system, the system tears down all calls carried by the system. In a redundant system, control is passed to the standby system controller and stable calls are maintained. Unstable calls are torn down.
Object Identifier
1.3.6.1.4.1.886.1.1.16
Data Type
Integer. The only valid value is 19950426.
Access Policy
Read-write
Status
Mandatory
Use the entries in this section to update your Time-Slot Allocation License or display the system's information concerning the current usage of time-slots. For further information on license configuration, refer to the Cisco VCO/4K System Administrator's Guide.
{config 17}
Description
The system license table.
Object Identifier
1.3.6.1.4.1.886.1.1.17
Data Type
Sequence of SysLicenseEntry
Access Policy
Not accessible
Status
Mandatory
{sysLicenseTable 1}
Description
Entry in the license table.
Object Identifier
1.3.6.1.4.1.886.1.1.17.1
Data Type
SysLicenseEntry
Access Policy
Not accessible
Status
Mandatory
Index
{sysLicenseIndex}
Sequence
sysLicenseIndex | Integer |
sysTimeSlotAllotted | Integer |
sysTimeSlotLicensed | Integer |
sysTimeSlotRemaining | Integer |
sysSerialNum | DisplayString |
sysLicenseNum | DisplayString |
sysLicenseOwnerString | OwnerString |
sysLicenseEntryStatus | FixedTabEntryStatus |
{sysLicenseEntry 1}
Description
The index into the system license table. One (1) is the active side, two (2) is the standby side (in a redundant system).
Object Identifier
1.3.6.1.4.1.886.1.1.17.1.1
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{sysLicenseEntry 2}
Description
Number of time-slots currently assigned in the system.
Object Identifier
1.3.6.1.4.1.886.1.1.17.1.2
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{sysLicenseEntry 3}
Description
Maximum number of licensed time-slots for the system.
Object Identifier
1.3.6.1.4.1.886.1.1.17.1.3
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{sysLicenseEntry 4}
Description
The number of available time-slots.
Object Identifier
1.3.6.1.4.1.886.1.1.17.1.4
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{sysLicenseEntry 5}
Description
Displays the serial number of the system's CPU card. This number is encoded in the CPU card at the factory and cannot be altered. A unique license number is associated with this serial number.
Object Identifier
1.3.6.1.4.1.886.1.1.17.1.5
Data Type
DisplayString. The valid value is an octet string with a length from 1 to 12 characters.
Access Policy
Read only
Status
Mandatory
{sysLicenseEntry 6}
Description
Gives the license number associated with the serial number of your CPU. You must enter a new license number when your Time-Slot Allocation License is updated or when you replace the CPU card.
Object Identifier
1.3.6.1.4.1.886.1.1.17.1.6
Data Type
DisplayString. The valid value is an octet string with a length from 1 to 12 characters.
Access Policy
Read-write
Status
Mandatory
{sysLicenseEntry 7}
Description
The entity that configured this object and is, therefore, using the assigned entry.
Object Identifier
1.3.6.1.4.1.886.1.1.17.1.7
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{sysLicenseEntry 8}
Description
The status of this object.
Object Identifier
1.3.6.1.4.1.886.1.1.17.1.8
Data Type
FixedTabEntryStatus
Access Policy
Read-write
Status
Mandatory
{sysLicenseEntry 9}
Description
Registers the last error that occurred on this entry.
Object Identifier
1.3.6.1.4.1.886.1.1.17.1.9
Data Type
Integer. Valid values are as follows:
| Value | String |
|---|---|
8704 | notRedundantSystem |
8705 | invalidLength |
8706 | decryptionFailed |
Access Policy
Read only
Status
Mandatory
{config 18}
Description
The time, displayed in hundredths of a second, since the feature table was last modified. Helps NMS application developers determine the polling of the agent parameters.
Object Identifier
1.3.6.1.4.1.886.1.1.18
Data Type
TimeTicks
Access Policy
Read-write
Status
Mandatory
Use the entries in the system feature table section to see and if necessary, change, all the current system features. With system features you can modify system operating characteristics to meet specific application requirements. For further information on configuring the system features, refer to the Cisco VCO/4K System Administrator's Guide.
{config 19}
Object Identifier
1.3.6.1.4.1.886.1.1.19
{features 1}
Description
Informs the system-controller initialization software whether the system is redundant or nonredundant. Redundant systems have a second system controller and an NBC3 card. If the redundant hardware is present, the system does not function as a redundant system unless this feature is enabled.
 |
Caution When you set or change this feature, reinitialize your system for the change to take effect. |
Object Identifier
1.3.6.1.4.1.886.1.1.19.1
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | System is not redundant |
2 | yes | System is redundant |
Access Policy
Read-write
Status
Mandatory
{features 2}
Description
Controls the output of Major/Minor alarm reports to the system printer. If you anticipate heavy call traffic, disable this feature to reduce processing overhead on the system.
|
Caution When you set or change this feature, reinitialize your system for the change to take effect. |
Object Identifier
1.3.6.1.4.1.886.1.1.19.2
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | No reports are sent to the system printer. |
2 | yes | The Major/Minor alarm reports are sent to the system printer 5 minutes after system initialization is completed and every 30 minutes thereafter. |
Access Policy
Read-write
Status
Mandatory
{features 3}
Description
Blocks the printing of card restored and alarm messages for every card during the initial 10 minutes following system boot. These messages in large systems will slow the system boot and lead to performance problems. Therefore, this feature should be enabled in those systems.
|
Caution When you set or change this feature, reboot your system for the change to take effect. |
Object Identifier
1.3.6.1.4.1.886.1.1.19.3
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | All alarm messages are printed. |
2 | yes | Blocks the printing of card restored and alarm messages during the first 10 minutes following system initialization. |
Access Policy
Read-write
Status
Mandatory
{features 4}
Description
Controls the system's response to return or not return a card to active service after an error condition. The system automatically takes a T1 card out of service when the SLIP or Out-of-Frame (OOF) limit is reached. The limits are:
OOFs | 17 |
SLIPS | 256 |
Both error threshold counters are reset to zero (0) at midnight.
Object Identifier
1.3.6.1.4.1.886.1.1.19.4
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | The system automatically returns the card to the Active state when the condition clears. |
2 | yes | The system takes the card out of service and does not try to reset it. You must manually reset the card. Use the Card Maintenance menu on the console or set the status object in the card table entry. |
Access Policy
Read-write
Status
Mandatory
{features 5}
Description
Controls the system response to outgoing port detection. The Null Outpulse Rule performs an outward seizure (SEIZE token), a wait for final answer (FINAL SUP A token), and starts a 30-second grace timer.
Refer to Chapter 2 of the Cisco VCO/4K Extended Programming Reference or Chapter 2 of the Cisco VCO/4K Standard Programming Reference for further information on the Null Outpulse Rule.
Object Identifier
1.3.6.1.4.1.886.1.1.19.5
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | The system only accepts detection of true answer supervision as the final answer from an outgoing port. |
2 | yes | The outgoing port is considered answered if the system detects either a true answer or the grace timer expires. |
Access Policy
Read-write
Status
Mandatory
{features 6}
Description
Controls printing of card error reports.
Object Identifier
1.3.6.1.4.1.886.1.1.19.6
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | The system prints the card error report when the error occurs and when the threshold counters are reset at midnight. |
2 | yes | The system disables the printing of the card error report and prevents resetting of the card error threshold counters. |
Access Policy
Read-write
Status
Mandatory
{features 7}
Description
Controls the information on digit field reports.
Object Identifier
1.3.6.1.4.1.886.1.1.19.7
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | The Field Designator does not appear in reports. |
2 | yes | Causes the optional Field Designator byte to appear in MF Digit ($D0), DTMF Digit ($D1), and Spoken Digit ($D4) reports. This Optional Field Designator byte indicates the field where the system stores the digits reported. When enabled, this byte appears in the byte offset position (reserved for the digit string). The digit string shifts to the next byte offset. |
Access Policy
Read-write
Status
Mandatory
{features 8}
Description
Prevents log files from becoming filled with Inpulse Rule abort messages. Use this feature only with the optional TeleRouter software overlay.
Certain types of line equipment use the tones issued during permanent signal processing to determine disconnects. This feature suppresses the PSC messages generated by the normal occurrence with these line types. Also, certain situations might generate Inpulse Rule abort messages due to incoming call abandons before call routing.
Object Identifier
1.3.6.1.4.1.886.1.1.19.8
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | PSC/Rule Abort messages are sent to the system log. |
2 | yes | PSC and Inpulse Rule abort messages are not sent to the system log when TeleRouter is operating in an unhosted environment. |
Access Policy
Read-write
Status
Mandatory
{features 9}
Description
Enables or disables Ethernet password checking on the system. Use this feature with host-to-VCO communication on a small, closed network. Define Ethernet passwords with the Password hostPassword object (1.3.6.1.4.1.886.1.1.27.1.1.6) in the hostTable.
Object Identifier
1.3.6.1.4.1.886.1.1.19.9
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | Ethernet password checking disabled. Enables the system to establish a link without requiring the correct password on that link. |
2 | yes | Ethernet password checking enabled. |
Access Policy
Read-write
Status
Mandatory
{features 10}
Description
Forces the ISDN B channels to the Active state without the D-channel being in the Active state.
|
Note Use this feature under the direction of your Cisco Systems TAC. |
Object Identifier
1.3.6.1.4.1.886.1.1.19.10
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | ISDN B- and D-channels are both in the same state. |
2 | yes | ISDN B-channel is forced into the Active state without the D-channel being in the Active state. |
Access Policy
Read-write
Status
Mandatory
Default Value
1 {no}
{features 11}
Description
A system-wide feature that enables or disables automatic call release on outgoing ports in response to backward MFCR2 supervision tones.
The system performs disconnect processing appropriate for the port type involved and generates an Outgoing Port Change of State ($DA) report (indicates a supervision error and specifies a backward tone detected). Refer to your country supplement for information on backward supervision tones.
Object Identifier
1.3.6.1.4.1.886.1.1.19.11
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | When set to N (No), the outgoing port remains in setup state unless out-of-band supervision or a host command changes the port state. |
2 | yes | When set to Y (Yes), an outgoing port is released when a specified backward tone is detected during R2 signaling. Backward tones are country specific. See your country supplement for specific tones. |
Access Policy
Read-write
Status
Mandatory
{features 12}
Description
Enables or disables the Guarded Disconnect option available for special SLIC cards.
Object Identifier
1.3.6.1.4.1.886.1.1.19.12
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | The Guarded Disconnect option is disabled. |
2 | yes | The special SLIC card sends an out-of-band Calling Party Disconnect signal to the two-wire devices connected to the card. |
Access Policy
Read-write
Status
Mandatory
Default Value
1 {no}
{features 13}
Description
Enables the UTC devices that cannot pass out-of-band end-of-call signals to detect in-band tones when the call is abandoned. When received, the tone is treated as a positive disconnect.
Object Identifier
1.3.6.1.4.1.886.1.1.19.13
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | UTC devices, that cannot pass out-of-band end-of-call signals, cannot detect in-band tones when the call is abandoned. |
2 | yes | Enables this feature. To function the system must meet the following conditions:
|
Access Policy
Read-write
Status
Mandatory
Default Value
1 {no}
{features 14}
Description
Enables both VCO controllers to consistently track conference calls and ports in SETUP.
Object Identifier
1.3.6.1.4.1.886.1.1.19.14
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | Enables redundancy tracking. |
2 | yes | Disables redundancy tracking. |
Access Policy
Read-write
Status
Mandatory
{features 15}
Description
Specifies whether to send the Incoming Port Change of State Report ($DB) before or after guard timing completes.
Object Identifier
1.3.6.1.4.1.886.1.1.19.15
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | $DB report is sent to the host system after guard timing completes. |
2 | yes | $DB report is sent to the host system before guard timing completes. |
Access Policy
Read-write
Status
Mandatory
{features 16}
Description
Enables all the cards in the system to perform the same call processing procedure. This feature is independent of the switch type selected for the PRI card.
Object Identifier
1.3.6.1.4.1.886.1.1.19.16
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | Disabled (default) |
2 | yes | Enabled |
Access Policy
Read-write
Status
Mandatory
Default Value
1 {no}
{features 17}
Description
Specifies whether to send the ISDN Change of State Report ($EA) each time an ISDN Connect message event is received from an ISDN D-channel.
Object Identifier
1.3.6.1.4.1.886.1.1.19.17
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | $EA report sending controlled by the ISDN supervision template configuration or by an ISDN Port Control ($49) host command. |
2 | yes | $EA report sent to the host for every ISDN connect message received. |
Access Policy
Read-write
Status
Mandatory
{features 18}
Description
When you enable this feature, the system checks whether the host system can send the $66 command. If the host system setup timer is on when the feature is on, host setup timing is cancelled.
Object Identifier
1.3.6.1.4.1.886.1.1.19.18
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | The host cannot send the $66 command. |
2 | yes | The host can send the $66 command. |
Access Policy
Read-write
Status
Mandatory
{features 19}
Description
Controls the system's response when an alerting message is received in an ISDN to non-ISDN connection.
Object Identifier
1.3.6.1.4.1.886.1.1.19.19
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | Let the incoming port listen to the outgoing port. |
2 | yes | Send a ring-back tone to the incoming port. |
Access Policy
Read-write
Status
Mandatory
{features 20}
Description
Controls whether the system collects fourth column DTMF digits.
Object Identifier
1.3.6.1.4.1.886.1.1.19.20
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | All host and report commands function as in previous software versions. |
2 | yes | The system collects fourth column DTMF digits. Also $D1 segments attached to $DD or $ED reports follow the enhanced format. |
Access Policy
Read-write
Status
Mandatory
{features 21}
Description
If this feature is set to yes, then the system is set to A Law.
Object Identifier
1.3.6.1.4.1.886.1.1.19.21
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | The system is not set to A-Law. |
2 | yes | The system is set to A-Law |
Access Policy
Read-write
Status
Mandatory
{features 22}
Description
The Send All ISDN Disconnect Reports feature flag specifies whether to send the ISDN Change of State Report ($EA) each time an ISDN DisConnect message event is received from an ISDN D-channel. If the feature flag is set to Y, the $EA report is sent to the host for every ISDN \QDisConnect' message received. If the feature flag is set to N, the sending of $EA reports for \QDisConnect' messages is controlled by the ISDN supervision template configuration or by an ISDN Port Control ($49) host command.
Object Identifier
1.3.6.1.4.1.886.1.1.19.22
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | Do not send all ISDN Disconnect reports. |
2 | yes | Send all ISDN Disconnect reports. |
Access Policy
Read-write
Status
Mandatory
{features 23}
Description
This flag is read only and is used to verify whether extended operational mode is activated. Extended mode is activated during the installation process by selecting the Set Extended Operational Mode option from the Installation Utilities screen. To configure the VCO system for 4,096 ports, both the Extended Operation Mode Set and Enable C-bus flags must be set to yes.
Object Identifier
1.3.6.1.4.1.886.1.1.19.23
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | Extended operational mode is not set. |
2 | yes | Extended operational mode is set. |
Access Policy
Read only
Status
Mandatory
{features 24}
Description
This flag is read only and is used to verify whether the C-bus is enabled. If yes, C-bus is enabled, and the VCO system can take advantage of 4,096 ports. If no, C-bus is disabled, and the system is limited to 2,048 ports. To configure the VCO system for 4,096 ports, both the Enable C-bus and Extended Operation Mode Set flags must be set to yes.
Object Identifier
1.3.6.1.4.1.886.1.1.19.24
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | The C-bus is not enabled. |
2 | yes | The C-bus is enabled. |
Access Policy
Read only
Status
Mandatory
{features 25}
Description
If this feature is set to yes, a PRI/N card alarm is raised when all the ports on the card are deactivated. An Alarm Condition ($F0) report is sent to the host specifying which card caused the alarm. A minor system alarm is raised and the event is logged if the system alarm condition does not already exist. The new alarm is raised only when all the ports are deactivated from the Card Maintenance screen, the $90 command from the host, or through a far end port-state transition to out of service.
When at least one of the deactivated ports becomes available for use, the card alarm is cleared and the event is logged. An Alarm Condition ($F0) report is generated to the host, specifying the card in which the alarm condition is cleared. The minor system alarm is cleared and the event is logged if there are no other occurrences of the same alarm.
For the alarm to clear, a port which has been deactivated must be made available from the Card Maintenance screen, the $90 command from the host, or through a far end port-state transition to out of service.
When all the ports of a PRI/N card are deactivated, a card alarm is raised and this event is logged.
Object Identifier
1.3.6.1.4.1.886.1.1.19.25
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | A card alarm is not raised when all ports are deactivated. |
2 | yes | A card alarm is raised when all ports are deactivated. |
Access Policy
Read-write
Status
Mandatory
{features 26}
Description
If this feature is set to yes, an ISDN Port Change of State ($EA) report is generated for the D-channel and all associated B-channels when the system receives a RESTART. For more information about $EA reports, refer to the Cisco VCO/4K ISDN Supplement.
Object Identifier
1.3.6.1.4.1.886.1.1.19.26
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | Do not send $EA ISDN Port Change of State on D-channel restart. |
2 | yes | Send $EA ISDN Port Change of State on D-channel restart. |
Access Policy
Read-write
Status
Mandatory
{features 27}
Description
Operates in situations where there is a variable digit length for a called number. In these cases, only the host application can determine if information about the called number is complete and that the call can be routed to its destination. The Generic depends on the host application for an indication of Overlap Receiving occurrence. To do this, the host application sends SETUP_ACK down to the Generic through the $49 command with a specified inpulse rule.
Object Identifier
1.3.6.1.4.1.886.1.1.19.27
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | Do not enable Net 5 Overlap Receiving. |
2 | yes | Enable Net 5 Overlap Receiving. |
Access Policy
Read-write
Status
Mandatory
{features 28}
Description
For use with Japanese networks. Allows you to select an alternate busy tone for Japanese networks which use a normal busy tone instead of the reorder tone during PSC (Permanent Signaling Condition) processing on a port.
When set to no, the normal reorder tone is presented during PSC. When set to yes, the normal busy tone is presented.
Object Identifier
1.3.6.1.4.1.886.1.1.19.28
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | Do not convert reorder tone to busy. |
2 | yes | Convert reorder tone to busy. |
Access Policy
Read-write
Status
Mandatory
{features 30}
Description
If this feature is set to yes, the system passes call reference up to the host, which enables the host application to support 2 B-channel transfer. The call reference is sent to the host in bytes 20 and 21 of the $EA report.
Object Identifier
1.3.6.1.4.1.886.1.1.19.30
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | Do not pass call references to the host. |
2 | yes | Pass call references to the host. |
Access Policy
Read-write
Status
Mandatory
{features 65)
Description
Registers the last error that occurred on this feature object.
Object Identifier
1.3.6.1.4.1.886.1.1.19.65
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String |
|---|---|
5376 | invalidFeature |
5377 | invalidValue |
Access Policy
Read only
Status
Mandatory
{feature 66}
Description
The entity that last configured a feature.
Object Identifier
1.3.6.1.4.1.886.1.1.19.66
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{features 67}
Description
The modification status of the configuration.
Object Identifier
1.3.6.1.4.1.886.1.1.19.67
Data Type
NonTabEntryStatus
Access Policy
Read-write
Status
Mandatory
{config 23}
Description
Enables or disables the AAC alarm contact to stop any external central office (CO) alarms tied to the switch.
Object Identifier
1.3.6.1.4.1.886.1.1.23
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | yes | Stop external CO alarms. |
2 | no | Do not stop external CO alarms. |
Access Policy
Read-write
Status
Mandatory
Use the objects in the firmware version table to display the version numbers of the software running on your system.
|
Note The objects that are returned when you do an SNMP "walk" of objects in the firmware table are dependent on the value of firmwareDevice. By default, the value of firmwareDevice is 0 ('none'). When firmwareDevice is 'none', there is no information to return for firmwareExeTable or firmwareDwnldTable. If you change firmwareDevice to, for example, 'c', then an SNMP "walk" will return all information on the objects in the firmware tables (if the switch uses boot and download files from 'c'). |
{config 24}
Object Identifier
1.3.6.1.4.1.886.1.1.24
{firmware 1}
Description
Version or revision number of VRTX.
Object Identifier
1.3.6.1.4.1.886.1.1.24.1
Data Type
DisplayString. Length of the display is from 1 to 4 characters.
Access Policy
Read only
Status
Mandatory
{firmware 2}
Description
Version or revision number of IFX.
Object Identifier
1.3.6.1.4.1.886.1.1.24.2
Data Type
DisplayString. Length of the display string is from 1 to 4 characters.
Access Policy
Read only
Status
Mandatory
{firmware 3}
Description
Version or revision number of TNX.
Object Identifier
1.3.6.1.4.1.886.1.1.24.3
Data Type
DisplayString. Length of the display string is from 1 to 4 characters.
Access Policy
Read only
Status
Mandatory
{firmware 4}
Description
Specifies the device to display configuration information.
|
Note The objects that are returned when you do an SNMP "walk" of objects in the firmware table are dependent on the value of firmwareDevice. By default, the value of firmwareDevice is 'none'. When firmwareDevice is 0 ('none'), there is no information to return for firmwareExeTable or firmwareDwnldTable. If you change firmwareDevice to, for example, 'c', then an SNMP "walk" will return all information on the objects in the firmware tables (if the switch uses boot and download files from 'c'). |
Object Identifier
1.3.6.1.4.1.886.1.1.24.4
Data Type
Integer. The possible values and their meanings are shown in the following table:
| Value | String | Value |
|---|---|---|
0 | none | No information is displayed. |
1 | a | Display information is sent to drive A. |
2 | c | Display information is sent to drive C. |
3 | f | Display information is sent to the floppy drive. |
4 | memory | Display information is sent to memory. |
Access Policy
Read-write
Status
Mandatory
{firmware 5}
Description
Version, revision, or FSR (field support release) number of the generic software.
Object Identifier
1.3.6.1.4.1.886.1.1.24.5
Data Type
DisplayString. Length of the display string is from 0 to 8 characters.
Access Policy
Read only
Status
Mandatory
The objects in the firmware executable table enable you to display the attributes of the firmware executable files.
{firmware 6}
Description
Table of executable files.
Object Identifier
1.3.6.1.4.1.886.1.1.24.6
Data Type
Sequence of FirmwareExeEntry
Access Policy
Not accessible
Status
Mandatory
{firmwareExeTable 1}
Description
An entry in the firmware executable table.
Object Identifier
1.3.6.1.4.1.886.1.1.24.6.1
Data Type
FirmwareExeEntry
Access Policy
Not accessible
Status
Mandatory
Index
firewareExtIndex
Sequence
firmwareExeIndex | Integer |
firmwareExeName | DisplayString |
firmwareExeVersion | DisplayString |
firmwareExeChecksum | Integer |
{firmwareExeEntry 1}
Description
An index into the firmware executable table.
Object Identifier
1.3.6.1.4.1.886.1.1.24.6.1.1
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{firmwareExeEntry 2}
Description
Name of the executable file.
Object Identifier
1.3.6.1.4.1.886.1.1.24.6.1.2
Data Type
DisplayString. Length of the display string is from 1 to 12 characters.
Access Policy
Read only
Status
Mandatory
{firmwareExeEntry 3}
Description
Version or revision number of the executable file.
Object Identifier
1.3.6.1.4.1.886.1.1.24.6.1.3
Data Type
DisplayString. Length of the display string is from 1 to 4 characters.
Access Policy
Read only
Status
Mandatory
{firmwareExeEntry 4}
Description
Checksum of the executable file.
Object Identifier
1.3.6.1.4.1.886.1.1.24.6.1.4
Data Type
Integer
Access Policy
Read only
Status
Mandatory
The objects in the firmware download table enable you to display the attributes of the firmware downloadable files.
{firmware 7}
Description
Table of the card download files.
Object Identifier
1.3.6.1.4.1.886.1.1.24.7
Data Type
Sequence of FirmwareDwnldEntry
Access Policy
Not accessible
Status
Mandatory
{firmware 8}
Description
Version of the vco MIB used by the SNMP agent software, in the form: x.y.z. See the beginning of the vco MIB text file for information on what the various parts of the version mean.
Object Identifier
1.3.6.1.4.1.886.1.1.24.8
Data Type
DisplayString (SIZE (5..8))
Access Policy
Read only
Status
Mandatory
{firmwareDwnldTable 1}
Description
An entry in the firmware card download table.
Object Identifier
1.3.6.1.4.1.886.1.1.24.7.1
Data Type
FirmwareDwnldEntry
Access Policy
Not accessible
Status
Mandatory
Sequence
firmwareDwnldIndex | Integer |
firmwareDwnldName | DisplayString |
firmwareDwnldVersion | DisplayString |
firmwareDwnldChecksum | Integer |
{firmwareDwnldEntry 1}
Description
An index into the firmwareDwnldTable.
Object Identifier
1.3.6.1.4.1.886.1.1.24.7.1.1
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{firmwareDwnldEntry 2}
Description
Name of the card download file.
Object Identifier
1.3.6.1.4.1.886.1.1.24.7.1.2
Data Type
DisplayString. Length of the display string is from 1 to 12 characters.
Access Policy
Read only
Status
Mandatory
{firmwareDwnldEntry 3}
Description
Version or revision number of the card download file.
Object Identifier
1.3.6.1.4.1.886.1.1.24.7.1.3
Data Type
DisplayString. Length of the display string is from 1 to 4 characters.
Access Policy
Read only
Status
Mandatory
{firmwareDwnldEntry 4}
Description
Checksum of the card download file.
Object Identifier
1.3.6.1.4.1.886.1.1.24.7.1.4
Data Type
Integer
Access Policy
Read only
Status
Mandatory
Use the file system table to display the attributes of the system files and to specify where you want to store system directories and log files.
{config 25}
Object Identifier
1.3.6.1.4.1.886.1.1.25
{filesystem 1}
Description
Storage device for the boot or download file.
Object Identifier
1.3.6.1.4.1.886.1.1.25.1
Data Type
Integer. The possible values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | a | Boot from drive A |
2 | c | Boot from drive C |
3 | f | Boot from a floppy diskette |
Access Policy
Read only
Status
Mandatory
{filesystem 2}
Description
Directory for the boot or download file.
Object Identifier
1.3.6.1.4.1.886.1.1.25.2
Data Type
DisplayString. Length of the display string is from 1 to 36 characters.
Access Policy
Read only
Status
Mandatory
{filesystem 3}
Description
The storage device for the system database files.
Object Identifier
1.3.6.1.4.1.886.1.1.25.3
Data Type
Integer. The possible values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | a | Store files on drive A |
2 | c | Store files on drive C |
3 | f | Store files on a floppy diskette |
Access Policy
Read only
Status
Mandatory
{filesystem 4}
Description
Directory for the system database files.
Object Identifier
1.3.6.1.4.1.886.1.1.25.4
Data Type
DisplayString. Length of the display string is from 1 to 36 characters.
Access Policy
Read only
Status
Mandatory
{filesystem 5}
Description
Storage device for the system log files.
Object Identifier
1.3.6.1.4.1.886.1.1.25.5
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | a | Store files on drive A |
2 | c | Store files on drive C |
3 | f | Store files on a floppy diskette |
Access Policy
Read-write
Status
Mandatory
{filesystem 6}
Description
Directory for the system log files.
Object Identifier
1.3.6.1.4.1.886.1.1.25.6
Data Type
DisplayString. Length is from 1 to 36 characters.
Access Policy
Read-write
Status
Mandatory
{filesystem 7}
Description
Storage device for system trace files.
Object Identifier
1.3.6.1.4.1.886.1.1.25.7
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | MeaningValue |
|---|---|---|
1 | a | Store trace files on drive A |
2 | c | Store trace files on drive C |
3 | f | Store trace files on a floppy diskette |
Access Policy
Read-write
Status
Mandatory
{filesystem 8}
Description
The directory for system trace files.
Object Identifier
1.3.6.1.4.1.886.1.1.25.8
Data Type
DisplayString. Length is from 1 to 36 characters.
Access Policy
Read-write
Status
Mandatory
{filesystem 9}
Description
Registers the last error that occurred on this file system object.
Object Identifier
1.3.6.1.4.1.886.1.1.25.9
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String |
|---|---|
5632 | invalidFilesystem |
5633 | invalidValue |
Access Policy
Read only
Status
Mandatory
{filesystem 10}
Description
Entity that configured the entry and is using the assigned resources.
Object Identifier
1.3.6.1.4.1.886.1.1.25.10
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{filesystem 11}
Description
Modification status of this entry.
Object Identifier
1.3.6.1.4.1.886.1.1.25.11
Data Type
NonTabEntryStatus
Access Policy
Read-write
Status
Mandatory
Use the objects in the peripheral configuration table to define operating parameters for peripheral equipment. System peripherals can include local system consoles, remote system consoles connected to your system by a modem, and printers.
{config 26}
Object Identifier
1.3.6.1.4.1.886.1.1.26
{peripheral 1}
Description
Keyboard for the local TTY. For further information, refer to the Cisco VCO/4K System Administrator's Guide.
Object Identifier
1.3.6.1.4.1.886.1.1.26.1
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String |
|---|---|
1 | vt220 |
2 | sunview |
3 | xview |
4 | universal |
Access Policy
Read-write
Status
Mandatory
{peripheral 2}
Description
Baud rate for the local TTY.
Object Identifier
1.3.6.1.4.1.886.1.1.26.2
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String |
|---|---|
1 | baud300 |
2 | baud1200 |
3 | baud2400 |
4 | baud4800 |
5 | baud9600 |
6 | baud19200 |
7 | baud38400 |
Access Policy
Read-write
Status
Mandatory
{peripheral 3}
Description
Stop bits for the local TTY.
Object Identifier
1.3.6.1.4.1.886.1.1.26.3
Data Type
Integer. Valid values are 1 and 2.
Access Policy
Read-write
Status
Mandatory
{peripheral 4}
Description
Bits per character for the local TTY.
Object Identifier
1.3.6.1.4.1.886.1.1.26.4
Data Type
Integer. Valid values or 7 or 8.
Access Policy
Read-write
Status
Mandatory
{peripheral 5}
Description
Parity for the local TTY.
Object Identifier
1.3.6.1.4.1.886.1.1.26.5
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | none | No parity is used. |
2 | odd | Parity is odd. |
3 | even | Parity is even. |
Access Policy
Read-write
Status
Mandatory
{peripheral 6}
Description
Keyboard for the remote TTY. For further information, see the Cisco VCO/4K System Administrator's Guide.
Object Identifier
1.3.6.1.4.1.886.1.1.26.6
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String |
|---|---|
1 | vt220 |
2 | sunview |
3 | xview |
4 | universal |
Access Policy
Read-write
Status
Mandatory
{peripheral 7}
Description
The baud rate for the remote TTY.
Object Identifier
1.3.6.1.4.1.886.1.1.26.7
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String |
|---|---|
1 | baud300 |
2 | baud1200 |
3 | baud2400 |
4 | baud4800 |
5 | baud9600 |
6 | baud19200 |
7 | baud38400 |
Access Policy
Read-write
Status
Mandatory
{peripheral 8}
Description
The stop bits for the remote TTY.
Object Identifier
1.3.6.1.4.1.886.1.1.26.8
Data Type
Integer. Valid values are 1 and 2.
Access Policy
Read-write
Status
Mandatory
{peripheral 9}
Description
The bits per character for the remote TTY.
Object Identifier
1.3.6.1.4.1.886.1.1.26.9
Data Type
Integer. Valid values are 7 and 8.
Access Policy
Read-write
Status
Mandatory
{peripheral 10}
Description
Parity for the remote TTY.
Object Identifier
1.3.6.1.4.1.886.1.1.26.10
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | none | No parity |
2 | even | Parity is even |
3 | odd | Parity is odd |
Access Policy
Read-write
Status
Mandatory
{peripheral 11}
Description
Keyboard type for the Telnet TTY. For further information, see the Cisco VCO/4K System Administrator's Guide.
Object Identifier
1.3.6.1.4.1.886.1.1.26.11
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String |
|---|---|
1 | vt220 |
2 | sunview |
3 | xview |
4 | universal |
Access Policy
Read-write
Status
Mandatory
{peripheral 12}
Description
The printer end of line (EOL) control character.
Object Identifier
1.3.6.1.4.1.886.1.1.26.12
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | cr-lf | Carriage return and line feed |
2 | cr | Carriage return |
3 | lf | Line feed |
Access Policy
Read-write
Status
Mandatory
{peripheral 13}
Description
Registers the last error that occurred in this entry.
Object Identifier
1.3.6.1.4.1.886.1.1.26.13
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String |
|---|---|
5888 | notApplicable |
5889 | invalidValue |
Access Policy
Read only
Status
Mandatory
{peripheral 14}
Description
The entity that configured this object and is using the attached resources.
Object Identifier
1.3.6.1.4.1.886.1.1.26.14
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{peripheral 15}
Description
Modification status of this entry.
Object Identifier
1.3.6.1.4.1.886.1.1.26.15
Data Type
NonTabEntryStatus
Access Policy
Read-write
Status
Mandatory
{peripheral 16}
Description
Flow-control for the Local TTY.
Object Identifier
1.3.6.1.4.1.886.1.1.26.16
Data Type
Integer (1=disabled;2=enabled)
Access Policy
Read-write
Status
Mandatory
{peripheral 17}
Description
Flow-control for the Remote TTY.
Object Identifier
1.3.6.1.4.1.886.1.1.26.17
Data Type
Integer (1=disabled;2=enabled)
Access Policy
Read-write
Status
Mandatory
Use the objects in the host configuration table to configure host interfaces and to indicate the status of the alarm conditions for host interfaces.
{config 27}
Object Identifier
1.3.6.1.4.1.886.1.1.27
{host 1}
Description
Table of the host interfaces.
Object Identifier
1.3.6.1.4.1.886.1.1.27.1
Data Type
Sequence of HostEntry
Access Policy
Not accessible
Status
Mandatory
{hostTable 1}
Description
Entry in the host table. An entry exports objects for all types of hosts, but certain fields are only meaningful for certain types of hosts.
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1
Data Type
HostEntry
Access Policy
Not accessible
Status
Mandatory
Index
{hostIndex}
Sequence
hostIndex | Integer |
hostType | Integer |
hostName | DisplayString |
hostPassword | DisplayString |
hostLocalPort | Integer |
hostAddress | IpAddress |
hostRemotePort | Integer |
hostAlarm | Integer |
hostProtocol | Integer |
hostResetTime | Integer |
hostSioPort | Integer |
hostPollTimeout | Integer |
hostBaud | Integer |
hostRetryCount | Integer |
hostParity | Integer |
hostBlockFactor | Integer |
hostModem | Integer |
hostFormat | Integer |
hostErrorStatus | Integer |
hostOwnerString | OwnerString |
hostEntryStatus | FixedTabEntryStatus |
hostFailureAction | Integer |
{hostEntry 1}
Description
An index into the host table. This object applies to all host types.
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.1
Data Type
Integer. Valid values are 1 to 9.
Access Policy
Read only
Status
Mandatory
{hostEntry 2}
Description
Determines the type of host specified.The first entry is always reserved for type internal. If the TeleRouter is supported, an SNMP_GET command on the first entry returns type internal (2). Otherwise, it returns type unused (1)
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.2
Data Type
Integer. Valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | unused | The TeleRouter is not installed. |
2 | internal | Internal software overlay. Optional TeleRouter software currently supported. You can specify only one Internal interface (must be first entry). |
3 | ethernet | Ethernet TCP/IP communication using the Ethernet port on the CPU-TM. You can specify up to eight Ethernet interfaces (cannot use first entry). |
4 | sio | ADLC asynchronous communication using ports on the CPU-TM. You can specify only two SIO port interfaces (cannot use first entry). |
Access Policy
Read-write
Status
Mandatory
Default Value
1 (unused)
{hostEntry 3}
Description
Determines the name of the host. This object accepts up to ten alphanumeric characters, either upper- or lowercase. This object applies to all hosts.
This object is valid for all host types except unused (no host).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.3
Data Type
DisplayString. Length of the display string is from 1 to 12 characters.
Access Policy
Read-write
Status
Mandatory
{hostEntry 6}
Description
Specifies the password required before accepting data from the network (applies only to Ethernet hosts). Password checking is disabled through the System Feature configuration. See the featureTable object featureEnableHostPasswordCheck (Object Identifier 1.3.6.1.4.1.886.1.1.19.9).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.6
Data Type
DisplayString. The valid value is a string with a length of from 1 to 16 ASCII characters.
Access Policy
Read-write
Status
Mandatory
{hostEntry 7}
Description
Specifies the local port number from which the system accepts data (applies only to Ethernet hosts).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.7
Data Type
Integer. Valid values are 0 or a valid Ethernet port number.
Access Policy
Read-write
Status
Mandatory
Default Value
1024
{hostEntry 8}
Description
Specifies the Internet stations from which the system controller accepts data. This object applies only to Ethernet hosts.
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.8
Data Type
IpAddress. INADDR_ANY (any Internet address == 0.0.0.0) or a valid Internet address.
Access Policy
Read-write
Status
Mandatory
{hostEntry 9}
Description
Specifies the TCP/IP port from which the system controller accepts data. This object applies only to Ethernet hosts.
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.9
Data Type
Integer. Valid values are zero (0) or a valid port number. The port number must be greater than 1023.
Access Policy
Read-write
Status
Mandatory
Default Value
1024
{hostEntry 10}
Description
Indicates current alarm state for host interface (applies only to Ethernet and SIO hosts).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.10
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | off | No alarm condition exits. |
2 | on | An alarm condition exists for this host interface link. The presence of an alarm state for an interface indicates that the link is currently out of service due to an error condition on either the system or the host end. You can use logfile messages to determine the cause of the link failure. |
Access Policy
Read only
Status
Mandatory
{hostEntry 11}
Description
Defines data transfer protocol used on host link (applies only to Ethernet and SIO hosts).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.11
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | tcp | TCP protocol. Required for Ethernet. |
2 | adlc | ADLC protocol. Required for SIO. |
3 | none | No protocol used. |
Access Policy
Read only
Status
Mandatory
{hostEntry 12}
Description
Specifies the time, in seconds, the VCO waits after a link failure/reset before re-establishing the link (applies to Ethernet and SIO hosts).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.12
Data Type
Integer. Valid value are from 0 to 999 seconds (cannot be set to 0).
Access Policy
Read-write
Status
Mandatory
{hostEntry 13}
Description
The physical port number of the SIO link (applies only to SIO hosts).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.13
Data Type
Integer. Valid values are 3 for SIO3, 4 for SIO4, 0 otherwise.
Access Policy
Read-write
Status
Mandatory
{hostEntry 14}
Description
Specifies the amount of time, in seconds, the system waits to be polled by the host before the system assumes an error exists on the link (applies only to SIO hosts).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.14
Data Type
Integer. Valid values are from 0 to 300 in increments of 1. Each increment is a 1 second interval. A setting of 15 seconds is recommended.
A zero (0) value equals an infinite wait. This is not recommended because the system uses this timeout to determine when a link failure has occurred.
Access Policy
Read-write
Status
Mandatory
Default Value
15 {seconds}
{hostEntry 15}
Description
Specifies the data transmission speed, in bits per second, over the link (applies only to SIO hosts).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.15
Data Type
Integer. The valid numerical and string values are shown in the following table. Default value is 5 (9600).
| Value | String |
|---|---|
1 | baud300 |
2 | baud1200 |
3 | baud2400 |
4 | baud4800 |
5 | baud9600 |
6 | baud19200 |
7 | baud38400 |
Access Policy
Read-write
Status
Mandatory
{hostEntry 16}
Description
Specifies the number of times the system retransmits a message before assuming an error condition exists on the link. This object applies only to SIO hosts.
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.16
Data Type
Integer. The valid values are from 0 to 255. Recommended value is 5.
Access Policy
Read-write
Status
Mandatory
Default Value
{5}
{hostEntry 17}
Description
Specifies if the system performs error checking using a parity bit (applies only to SIO hosts).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.17
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | none | No parity |
2 | even | Parity is even |
3 | odd | Parity is odd |
Access Policy
Read-write
Status
Mandatory
Default Value
1 {none}
{hostEntry 18}
Description
Specifies the number of messages allowed in a multiblocked transmission. Transmit blocks can be constructed with a message count up to this number. This object applies only to SIO hosts.
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.18
Data Type
Integer. Valid values are from 1 to 32. Recommended value is 5.
Access Policy
Read-write
Status
Mandatory
Default Value
5 {Messages in transmission}
{hostEntry 19}
Description
Specifies whether you are using a modem between this port and the host computer (applies only to SIO hosts).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.19
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | You are not using a modem. |
2 | yes | You are using a modem. System uses full modem control signaling. |
Access Policy
Read-write
Status
Mandatory
Default Value
1 (no modem)
{hostEntry 20}
Description
Specifies the number of stop bits used with the 8-bit data character (applies only to SIO hosts).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.20
Data Type
Integer. Valid values are 1 or 2.
Access Policy
Read-write
Status
Mandatory
{hostEntry 21}
Description
Registers the last error that occurred on this entry (applies to all host types).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.21
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String |
|---|---|
4864 | invalidHost |
4865 | invalidSlot |
4866 | notApplicable |
4867 | invalidValue |
4868 | noTelerouter |
4869 | duplicate |
4870 | notSupported |
Access Policy
Read only
Status
Mandatory
{hostEntry 22}
Description
The entity that configured the object (applies to all host types).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.22
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{hostEntry 23}
Description
Modification status of the entry (applies to all host types).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.23
Data Type
FixedTabEntryStatus
Access Policy
Read-write
Status
Mandatory
{hostEntry 24}
Description
Defines the action taken on failure of the host (applies to Etherenet and SIO).
Object Identifier
1.3.6.1.4.1.886.1.1.27.1.1.24
Data Type
Integer
Access Policy
Read-write
Status
Mandatory
{host 2}
Description
The time, displayed in hundredths of a second, since the host table was last modified. Helps NMS application developers determine the polling of the agent parameters.
Object Identifier
1.3.6.1.4.1.886.1.1.27.2
Data Type
TimeTicks
Access Policy
Read only
Status
Mandatory
Use the objects in the system host configuration table to configure the parameters that apply to the interactions between your system and the host.
{config 28}
Object Identifier
1.3.6.1.4.1.886.1.1.28
{sysHost 1}
Description
Enables or disables the host setup timer function.
Object Identifier
1.3.6.1.4.1.886.1.1.28.1
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | Host setup timer processing is not performed. |
2 | yes | Host setup timer processing performed based on the specified host setup timer value. |
Access Policy
Read-write
Status
Mandatory
Default Value
2 {Yes}
{sysHost 2}
Description
Configures the duration of the setup timer. The setup timer is the length of time a host has to respond to a new call report.
Object Identifier
1.3.6.1.4.1.886.1.1.28.2
Data Type
Integer. Valid values are from 0 to 60 seconds.
Access Policy
Read-write
Status
Mandatory
{sysHost 3}
Description
Specifies the action taken if all host links fail.
Object Identifier
1.3.6.1.4.1.886.1.1.28.3
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | major-alarm | A major alarm is generated when all host links fail. |
2 | fatal-alarm | A fatal alarm is generated when all host links fail. The system controller shuts down and reboots. If the system is redundant, then a system switchover is initiated. |
3 | conditional- | A major alarm is generated when all host links fail. A system switchover is initiated if the standby controller is on-line (file synchronization completed) and the system has active host links. No reboot is performed after a conditional switchover. |
Access Policy
Read-write
Status
Mandatory
{sysHost 4}
Description
Enables or disables the host control of call load feature. This applies when the host links are marked as ready to process calls. No call reports are issued to a host link until it is marked as available to process calls.
Object Identifier
1.3.6.1.4.1.886.1.1.28.4
Data Type
Integer. The valid values and their meanings are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | Host links marked as available when link is established. |
2 | yes | Host links not marked as available until the system receives a $C0 04 command from the host. |
Access Policy
Read-write
Status
Mandatory
Default Value
no {1}
{sysHost 5}
Description
Enables or disables host control verification.
Object Identifier
1.3.6.1.4.1.886.1.1.28.5
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | No host control verification is performed. The system accepts commands from any host link regardless of the host link assigned as controlling host. |
2 | yes | The system accepts commands only from the host link assigned to the call. Controlling host assignment is made based on the Incoming Call Distribution field configuration. |
Access Policy
Read-write
Status
Mandatory
Default Value
no {1}
{sysHost 6}
Description
Specifies how new incoming calls are distributed to available host links.
Object Identifier
1.3.6.1.4.1.886.1.1.28.6
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | broadcast | Reports for new calls are sent to all available host links. The first host to respond to the report is assigned as the controlling host. |
2 | cyclic | Reports for new calls are uniformly distributed among all available host links. One host link is assigned to the call by the system and all reports for that call are sent only to the assigned host link. If you enable Host Control Checking then resource commands for the call are only accepted from the assigned host link. |
Access Policy
Read-write
Status
Mandatory
Default Value
1 {broadcast}
{sysHost 7}
Description
Enables or disables the suppression of alarm reports during the first five minutes following system initialization. During system initialization several alarm conditions are set and cleared as part of normal processing.
An Alarm Condition ($F0) report is normally issued to all active host links whenever an alarm condition is set or cleared. Enabling this feature suppresses these reports until the system is beyond the initialization period.
Object Identifier
1.3.6.1.4.1.886.1.1.28.7
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | The $F0 alarm reports are issued to all active host links during initialization. |
2 | yes | The $F0 alarm reports are suppressed for the first five minutes following system initialization. |
Access Policy
Read-write
Status
Mandatory
Default Value
1 {no}
{sysHost 8}
Description
Enables or Disables the sending of Active/Standby Mode ($DC) reports to indicate that the system has completed initialization and is ready to process calls.
Object Identifier
1.3.6.1.4.1.886.1.1.28.8
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String | Meaning |
|---|---|---|
1 | no | No Active/Standby Mode ($DC) report is issued when Phase 3 system initialization has completed. |
2 | yes | Active/Standby Mode ($DC) report is issued when Phase 3 system initialization has completed. |
Access Policy
Read-write
Status
Mandatory
Default Value
1 {no}
{sysHost 9}
Description
Registers the last error that occurred in this entry.
Object Identifier
1.3.6.1.4.1.886.1.1.28.9
Data Type
Integer. The valid numerical and string values are shown in the following table:
| Value | String |
|---|---|
5120 | invalidFlag |
5121 | invalidValue |
Access Policy
Read only
Status
Mandatory
{sysHost 10}
Description
The entity that last configured a feature.
Object Identifier
1.3.6.1.4.1.886.1.1.28.10
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{sysHost 11}
Description
The modification status of the configuration.
Object Identifier
1.3.6.1.4.1.886.1.1.28.11
Data Type
NonTabEntryStatus
Access Policy
Read-write
Status
Mandatory
The software Live Upgrade option gives you the ability to update software on a redundant VCO system without loss of calls, and with a minimum reduction in capacity. The procedure consists of:
Details concerning the live upgrade process can be found in the system Generic Release Notes for the latest release.
This chapter provides information pertaining only to live upgrade data which can be accessed from the VCO MIB.
|
Caution The MIB software is not backward compatible. If you are using SNMP, and you upgrade to the latest software release, you must recompile the MIB. |
{liveU 1}
Description
The current operational state of the live upgrade process. The above includes both internal and external states. Internal states indicate some event in progress on the local side or a wait in progress for an event to occur on the other side and end with the suffix InProgress or OnOther, respectively. While the live upgrade process is in an internal state, the only user-initiated event or action that is possible is abort. External states indicate the completion of some event or activity and end with the suffix Complete. The user can initiate another event at this point by setting liveUAdminEvent. The valid next possible events at any given time is indicated by the object liveUValidNextEvents.
Object Identifier
1.3.6.1.4.1.886.1.1.31.1.1.1
Data Type
Integer. Possible values are:
| Value | State |
|---|---|
1 | idle |
2 | prepareInProgress |
3 | prepareComplete |
4 | installInProgress |
5 | waitingForInstallOnOther |
6 | bothInstallsComplete |
7 | upgradeInProgress |
8 | upgradeComplete |
9 | configInProgress |
10 | configComplete |
11 | updateInProgress |
12 | waitingForUpdateOnOther |
13 | bothUpdatesComplete |
14 | switchoverInProgress |
15 | switchoverComplete |
16 | cutoverInProgress |
17 | cutoverComplete |
18 | backupInProgress |
19 | backupComplete |
20 | cleanupInProgress |
21 | abortInProgress |
Access Policy
Read only
Status
Mandatory
{liveU 2}
Description
The desired event that the user wants to generate.
All events, other than installComplete, configOptSoftComplete, cutoverComplete, and backupDBComplete generate some activity on the switch. The four events above indicate to the switch the completion of some activity carried out by the user. The user performs these activities using other MIB groups or other facilities. Installation may be performed via FTP or some other means. Configuration of optional software is performed using the groups optSoft and etherCfg. Cutting over cards is performed using the Status objects of the cards being cut over. Backup may be performed via FTP or some other means.
Object Identifier
1.3.6.1.4.1.886.1.1.31.1.1.2
Data Type
Integer. Possible values are:
| Value | State |
|---|---|
1 | prepareForInstall |
2 | installComplete |
3 | upgrade |
4 | configOptSoftComplete |
5 | update |
6 | switchover |
7 | cutoverComplete |
8 | backupDBComplete |
9 | cleanup |
10 | abort |
11 | none |
Access Policy
Read-write
Status
Mandatory
{liveU 3}
Description
This is a bit mask that indicates the valid 'next possible events' as follows:
| bit # | Meaning |
|---|---|
1 | prepareForInstall |
2 | installComplete |
3 | upgrade |
4 | configOptSoftComplete |
5 | update |
6 | switchover |
7 | cutoverComplete |
8 | backupDBComplete |
9 | cleanup |
10 | abort |
Bits are numbered according to Motorola format (LSB is bit 0).
Object Identifier
1.3.6.1.4.1.886.1.1.31.1.1.3
Data Type
Integer. (0..'7ff'h)
Access Policy
Read only
Status
Mandatory
{liveU 4}
Description
This object indicates whether a liveU operation (started by setting liveUAdminEvent) is pending or not. The meanings of the various values are as follows:
| Value | Meaning |
|---|---|
notPending | No operation has been started since the system was last booted |
pending | An operation that was previously started is currently pending completion |
completedWithSuccess | An operation that was previously started has completed with success |
completedWithFailure | An operation that was previously started has completed with failure |
Object Identifier
1.3.6.1.4.1.886.1.1.31.1.1.4
Data Type
Integer. Possible values are as follows:
| Value | String |
|---|---|
1 | notPending |
2 | pending |
3 | completedWithSuccess |
4 | completedWithFailure |
Access Policy
Read only
Status
Mandatory
{liveU 5}
Description
The reason for failure if liveUAdminEvent cannot be set or if there is any other failure.
Object Identifier
1.3.6.1.4.1.886.1.1.31.1.1.5
Data Type
Integer. Possible values are as follows:
| Value | String |
|---|---|
7424 | unknownFailure |
7425 | illegalEvent |
7426 | standbyNotOnline |
7427 | notRedundant |
7428 | notAllowedOnActive |
7429 | intErrQueue |
7430 | intErrInvalidState |
7431 | intErrInvalidEvent |
7432 | intErrProcessing |
Access Policy
Read only
Status
Mandatory
{liveU 6}
Description
The entity that configured the liveU group.
Object Identifier
1.3.6.1.4.1.886.1.1.31.1.1.6
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{liveU 7}
Description
The status of the liveU group.
Object Identifier
1.3.6.1.4.1.886.1.1.31.1.1.7
Data Type
NonTabEntryStatus
Access Policy
Read-write
Status
Mandatory
{liveUGroup 2}
Description
The time (in hundredths of a second) since the epoch that the liveU group was last modified.
Object Identifier
1.3.6.1.4.1.886.1.1.31.1.2
Data Type
TimeTicks
Access Policy
Read only
Status
Mandatory
{liveUGroup 2}
Description
The list of logs.
Object Identifier
1.3.6.1.4.1.886.1.1.31.2.1
Data Type
Sequence of LiveUlogEntry
Access Policy
Not accessible
Status
Mandatory
{liveUlogTable 1}
Description
A log entry.
Object Identifier
1.3.6.1.4.1.886.1.1.31.2.1.1
Data Type
LiveUlogEntry
Access Policy
Not accessible
Status
{liveUlogEntry 1}
Description
The year of the log time-stamp.
Object Identifier
1.3.6.1.4.1.886.1.1.31.2.1.1.1
Data Type
Integer (1991..2119)
Access Policy
Read only
Status
Mandatory
{liveUlogEntry 2}
Description
The month of the log time-stamp.
Object Identifier
1.3.6.1.4.1.886.1.1.31.2.1.1.2
Data Type
Integer. Possible values are as follows:
| Value | String |
|---|---|
1 | january |
2 | february |
3 | march |
4 | april |
5 | may |
6 | june |
7 | july |
8 | august |
9 | september |
10 | october |
11 | november |
12 | december |
Access Policy
Read only
Status
Mandatory
{liveUlogEntry 3}
Description
The date of the log time-stamp.
Object Identifier
1.3.6.1.4.1.886.1.1.31.2.1.1.3
Data Type
Integer (1...31)
Access Policy
Read only
Status
Mandatory
{liveUlogEntry 4}
Description
The hour of the log time-stamp.
Object Identifier
1.3.6.1.4.1.886.1.1.31.2.1.1.4
Data Type
Integer (0...23)
Access Policy
Read only
Status
Mandatory
{liveUlogEntry 5}
Description
The minute of the log time-stamp.
Object Identifier
1.3.6.1.4.1.886.1.1.31.2.1.1.5
Data Type
Integer (0...59)
Access Policy
Read only
Status
Mandatory
{liveUlogEntry 6}
Description
The second of the log time-stamp.
Object Identifier
1.3.6.1.4.1.886.1.1.31.2.1.1.6
Data Type
Integer (1...59)
Access Policy
Read only
Status
Mandatory
{liveUlogEntry 7}
Description
The sequence number of this log entry for this time-stamp, starting with one (1). If there are multiple log entries with the same time-stamp, this value starts incrementing by 1 for each entry with the same time-stamp. When the time-stamp changes, this value starts again from one (1).
Object Identifier
1.3.6.1.4.1.886.1.1.31.2.1.1.7
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{liveUlogEntry 8}
Description
The day of the week.
Object Identifier
1.3.6.1.4.1.886.1.1.31.2.1.1.8
Data Type
Integer. Possible values are:
| Value | String |
|---|---|
1 | sunday |
2 | monday |
3 | tuesday |
4 | wednesday |
5 | thursday |
6 | friday |
7 | saturday |
Access Policy
Read only
Status
Mandatory
{liveUlogEntry 9}
Description
For nonredundant systems, the value of this object is always 'active'. For redundant systems, this object identifies whether the side of the switch issuing this message was active or standby.
Object Identifier
1.3.6.1.4.1.886.1.1.31.2.1.1.9
Data Type
Integer. Possible values are:
| Value | String |
|---|---|
1 | active |
2 | standby |
3 | unknown |
Access Policy
Read only
Status
Mandatory
{liveUlogEntry 10}
Description
The log message itself.
Object Identifier
1.3.6.1.4.1.886.1.1.31.2.1.1.10
Data Type
DisplayString (size 1...80)
Access Policy
Read only
Status
Mandatory
{liveUlogEntry 11}
Description
The error that was encountered in the last log operation.
Object Identifier
1.3.6.1.4.1.886.1.1.31.2.1.1.11
Data Type
Integer. Possible values are as follows:
| Value | String |
|---|---|
7680 | fileOpenErr |
7681 | fileSeekErr |
7682 | devAndDirUnknown |
7683 | dirListErr |
7684 | expectedRecNotFnd |
7685 | expectedEorNotFnd |
7686 | unexpectedEofOrErr |
Access Policy
Read only
Status
Mandatory
The optional software group provides SNMP access to optional software components running on the VCO system, including TeleRouter, ISDN/NFAS, and the Ethernet communications package.
The following object listings provide access to generic configuration functions related to optional software products. Specific information relating to Ethernet configuration follows in the "Ethernet Communciations Group" section. Information pertaining to ISDN/NFAS can be found in "Single-Span ISDN Card Group". Information pertaining to TeleRouter can be found in the "Routing Table Group" section.
{optSoft 1}
Description
The list of optional software entries.
Object Identifier
1.3.6.1.4.1.886.1.1.32.1.1
Data Type
Sequence of OptSoftEntry
Access Policy
Not accessible
Status
Mandatory
{optSoftTable 1}
Description
An optional software entry.
Object Identifier
1.3.6.1.4.1.886.1.1.32.1.1.1
Data Type
OptSoftEntry
Access Policy
Not accessible
Status
Mandatory
{optSoftEntry 1}
Description
The optional software to be enabled or disabled.
Possible values include:
| Value | String |
|---|---|
1 | Telerouter |
2 | Ethernet |
3 | ISDN |
4 | NFAS |
Object Identifier
1.3.6.1.4.1.886.1.1.32.1.1.1.1
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{optSoftEntry 2}
Description
Contains the status of the optional software. Possible values are:
| Value | String |
|---|---|
1 | enabled |
2 | disabled |
3 | notLoaded |
Object Identifier
1.3.6.1.4.1.886.1.1.32.1.1.1.2
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{optSoftEntry 3}
Description
Determines if the optional software should be enabled or disabled. If the optional software is not loaded, the value returned is 'disable'. Possible values are:
| Value | String |
|---|---|
1 | enable |
2 | disable |
Object Identifier
1.3.6.1.4.1.886.1.1.32.1.1.1.3
Data Type
Integer
Access Policy
Read-write
Status
Mandatory
{optSoftEntry 4}
Description
The reason for failure if optSoftState cannot be set to the desired state or if there is some other error. Possible values are:
| Value | String |
|---|---|
7936 | unknownFailure |
7937 | softwareNotLoaded |
Object Identifier
1.3.6.1.4.1.886.1.1.32.1.1.1.4
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{optSoftEntry 5}
Description
The entity that configured this entry and is therefore using the entry assigned to it.
Object Identifier
1.3.6.1.4.1.886.1.1.32.1.1.1.5
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{optSoftEntry 6}
Description
The status of the optional software group.
Object Identifier
1.3.6.1.4.1.886.1.1.32.1.1.1.6
Data Type
FixedTabEntryStatus
Access Policy
Read-write
Status
Mandatory
{optSoftEntry 2}
Description
The time (in hundredths of a second) since the epoch that the optional software table was last modified.
Object Identifier
1.3.6.1.4.1.886.1.1.32.1.2
Data Type
TimeTicks
Access Policy
Read only
Status
Mandatory
The Ethernet Communications Package supports Ethernet TCP/IP communications between the VCO system and one or more host computers. It is an optional package that consists of software and documentation.
TCP error handling includes checksum verification of messages, sequential message delivery, and protection against message duplication.
The Ethernet package supports a single physical link with multiple logical connections (i.e., sockets, which are the interface between the Ethernet communications protocol, and the application). The VCO system supports up to eight simultaneous sockets, using the BSD 4.3 Internet Domain sockets interface.
The VCO MIB provides access to system Ethernet configuration functions, including:
The following object listings provide further details concerning Ethernet configuration through SNMP queries to the VCO MIB.
{etherCfg 1}
Description
The current IP address of this switch.
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.1.1
Data Type
IpAddress
Access Policy
Read only
Status
Mandatory
{etherCfg 2}
Description
The desired IP address of this switch.
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.1.2
Data Type
IpAddress
Access Policy
Read-write
Status
Mandatory
{etherCfg 3}
Description
Enables or disables NFS file access.
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.1.3
Data Type
Integer
Access Policy
Read-write
Status
Mandatory
{etherCfg 4}
Description
The IP address of the NFS server.
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.1.4
Data Type
IpAddress
Access Policy
Read-write
Status
Mandatory
{etherCfg 5}
Description
The NFS server name.
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.1.5
Data Type
DisplayString (SIZE (0..15))
Access Policy
Read-write
Status
Mandatory
{etherCfg 6}
Description
The NFS Server Mount Directory Point.
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.1.6
Data Type
DisplayString (SIZE (0..47))
Access Policy
Read-write
Status
Mandatory
{etherCfg 7}
Description
The system name of this switch.
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.1.7
Data Type
DisplayString (SIZE (0..15))
Access Policy
Read-write
Status
Mandatory
{etherCfg 8}
Description
The user id assigned to this switch.
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.1.8
Data Type
Integer (0..65535)
Access Policy
Read-write
Status
Mandatory
{etherCfg 9}
Description
The group id assigned to this switch.
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.1.9
Data Type
Integer (0..65535)
Access Policy
Read-write
Status
Mandatory
{etherCfg 10}
Description
The Umask assigned to this switch. This should consist of no more than 3 numerals with no numeral exceeding the number 7 (i.e., octal values).
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.1.10
Data Type
Integer
Access Policy
Read-write
Status
Mandatory
{etherCfg 11}
Description
Registers the last error that occurred in this group. Possible values are:
| Value | String |
|---|---|
8192 | invalidValue |
8193 | unacceptableIpAddr |
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.1.11
Data Type
Integer
Access Policy
Read only
Status
Mandatory
{etherCfg 12}
Description
The entity that configured this entry and is therefore using the entry assigned to it.
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.1.12
Data Type
OwnerString
Access Policy
Read-write
Status
Mandatory
{etherCfg 13}
Description
The status of this table entry.
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.1.13
Data Type
NonTabEntryStatus
Access Policy
Read-write
Status
Mandatory
{etherCfg 14}
Description
The subnet mask of this system.
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.1.14
Data Type
IpAddress
Access Policy
Read-write
Status
Mandatory
{etherCfgGroup 2}
Description
The time (in hundredths of a second) since the epoch that the etherCfg group was last modified.
Object Identifier
1.3.6.1.4.1.886.1.1.32.2.2
Data Type
TimeTicks
Access Policy
Read only
Status
Mandatory
Posted: Sat Sep 28 11:04:49 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.