Table of Contents
Index
- 10/100/1000 ports
- cable lengths 2-7
- connecting to 2-30 to 2-32
- connectors and cables B-3 to B-4
- described 1-8
- illustrated 1-6
- 10/100 ports
- cable lengths 2-7
- connecting to 2-30 to 2-32
- connectors and cables B-1 to B-2
- described 1-6 to 1-7
- illustrated 1-3
- 1000BASE-X GBIC module ports
- cable lengths 2-7
- connecting to 2-34 to 2-35
- connectors B-5
- described 1-9
- illustrated 2-35
- 100BASE-FX ports
- cable lengths 2-7
- connecting to 2-33 to 2-34
- connectors and cables B-2 to B-3
- described 1-7
- illustrated 1-4
- power levels, fiber-optic A-4
- 48 VDC power system warning 2-20, C-30 to C-31
- AC power
- connecting to 2-19
- connector 1-22
- specifications A-1 to A-2
- adapter pinouts, terminal
- RJ-45-to-DB-25 B-11
- RJ-45-to-DB-9 B-10
- addresses, assigning IP 2-39
- agency approvals A-4
- altitude A-1 to A-3
- autonegotiation 1-7
- bandwidth utilization 1-17 to 1-20
- brackets
- See mounting brackets, attaching
- cable guide, attaching 2-18
- cables
- 10/100/1000 ports 1-8
- 10/100 ports 1-6 to 1-7
- crossover
- connecting to B-1, B-3 to B-4
- four twisted-pair pinout, 10/100 ports B-7
- four twisted-pair pinout, 1000BASE-T ports B-8
- two twisted-pair pinout B-6
- GBIC
- 1000BASE-X module 2-34
- GigaStack module 2-36
- MT-RJ 1-7
- problems, solving 3-3 to 3-4
- rollover B-9
- straight-through
- connecting to B-1, B-3 to B-4
- four twisted-pair pinout, 10/100 ports B-7
- four twisted-pair pinout, 1000BASE-T ports B-8
- two twisted-pair pinout B-6
- twisted-pair
- 10/100/1000 ports 1-8
- 10/100 ports 1-6 to 1-7
- See also connectors and cables
- Catalyst 2950G-24-EI-DC LAN warning 2-20, C-31 to C-32
- Catalyst 2950G-24-EI-DC service warning 2-20, C-33 to C-34
- cautions, defined xii
- chassis warnings
- against stacking 2-2, C-24 to C-25
- rack-mounting, servicing 2-10, C-10 to C-14
- circuit breaker (15A) warning 2-3, C-8 to C-9
- CiscoView 1-24
- Class 1 laser product warning 2-4, C-28 to C-29
- clearance 2-7
- CLI 1-24
- Cluster Builder application 1-23
- Cluster Management Suite
- See CMS
- Cluster Manager application 1-23
- Cluster View application 1-23
- CMS
- Cluster Builder 1-23
- Cluster Management 1-23
- Cluster View 1-23
- described 1-23
- Device Manager 1-23
- command-line interface
- See CLI
- configuration examples, network 1-1
- configuring ports 2-39
- connecting
- to 10/100/1000 ports 2-30 to 2-32
- to 10/100 ports 2-30 to 2-32
- to 1000BASE-X GBIC module ports 2-34 to 2-35
- to 100BASE-FX ports 2-33 to 2-34
- to AC power 2-19
- to console port 2-37 to 2-39
- to DC power 2-20 to 2-29
- to GBIC module ports 2-34 to 2-36
- to GigaStack GBIC module ports 2-36
- to PC 2-37 to 2-39
- to RPS 2-20
- to terminal 2-37 to 2-39
- connection procedures 2-30 to 2-39
- connectivity problems, solving 3-4
- connectors and cables
- 10/100/1000 ports B-3 to B-4
- 10/100 ports B-1 to B-2
- 1000BASE-X GBIC module ports B-5
- 100BASE-FX ports B-2 to B-3
- console port B-5 to B-6
- GigaStack GBIC module ports B-5
- power
- AC 1-22
- DC 1-22
- RPS 1-23
- See also cables
- console port
- adapter pinouts
- RJ-45-to-DB-25 terminal B-11
- RJ-45-to-DB-9 terminal B-10
- cable, rollover B-9
- connecting to 2-37 to 2-39, B-9 to B-11
- default characteristics 2-37
- illustrated 1-21 to 1-22
- conventions, document xii to xv
- crossover cable
- connecting to
- 10/100/1000 ports 2-30
- 10/100 ports 2-30
- connectivity problems 3-4
- pinout
- four twisted-pair, 10/100 ports B-7
- four twisted-pair, 1000BASE-T ports B-8
- two twisted-pair B-6
- DC power
- connecting to 2-20 to 2-29
- connector 1-22
- specifications A-3
- warnings 2-20 to 2-21, 2-23 to 2-24
- DC power disconnection warning 2-24, C-37
- DC power source warning 2-20, C-41 to C-42
- default characteristics of the console port 2-37
- desk-mounting 2-19
- Device Manager 1-23
- dimensions A-2 to A-3
- documentation
- CD-ROM xvi
- ordering xvii
- related publications xv to xvi
- URLs, Cisco xvi
- document conventions xii to xv
- duplex LED 1-14, 1-17
- electrical noise, avoiding 2-8
- electromagnetic interface (EMI) A-4
- EMC
- agency approvals A-4
- regulatory statements 2-4 to 2-6
- EMC regulatory statements 2-4 to 2-6
- environmental ranges A-1 to A-3
- Ethernet cable warning 2-21, C-36 to C-37
- examples, network configuration 1-1
- fan problems, solving 3-4
- features 1-1 to 1-3
- feedback to Cisco Systems, web xvii
- fiber-port specifications A-4
- front panel
- 10/100/1000 ports 1-8
- 10/100 ports 1-6 to 1-7
- 100BASE-FX ports 1-7
- clearance 2-7
- described 1-3
- GBIC module ports 1-9
- illustrated 1-3 to 1-6
- LEDs 1-9 to 1-12
- full-duplex LED 1-17
- GBIC module ports
- cable lengths 2-7
- cables
- 1000BASE-X 2-34
- GigaStack B-5
- connecting to 2-34 to 2-36
- connectors
- 1000BASE-X B-5
- GigaStack B-5
- described 1-9
- illustrated
- 1000BASE-X 2-35
- GigaStack 2-36
- module slots 1-4 to 1-5
- GigaStack GBIC module ports
- cable lengths 2-7
- connecting to 2-36
- connectors and cables B-5
- described 1-9
- illustrated 2-36
- ground connection warning 2-3, 2-21, C-20 to C-21
- grounded equipment warning 2-3, 2-21, C-18 to C-19
- half-duplex LED 1-17
- HP OpenView 1-24
- humidity A-1 to A-3
- installation
- cable guide 2-18
- desk-mount 2-19
- guidelines 2-7
- package contents 2-8 to 2-9
- POST 2-29
- power on 2-19 to 2-20
- pre-installation information and guidelines 2-2 to 2-6
- rack-mount 2-10
- shelf-mount 2-19
- table-mount 2-19
- warning 2-2, C-7
- IOS command-line interface
- See CLI
- IP address procedures 2-39
- jewelry removal warning 2-4, C-22 to C-23
- laser beam exposure warning 2-4, C-29 to C-30
- LEDs
- color meanings 1-17 to 1-18
- duplex (DUPLX) 1-14, 1-17
- front panel 1-9 to 1-12
- full-duplex 1-17
- half-duplex 1-17
- interpreting 1-13, 1-17 to 1-18
- port 1-13
- port mode 1-14 to 1-16
- port status 1-13
- RPS 1-13
- speed (SPEED) 1-14, 1-18
- status (STAT) 1-14, 1-17
- system 1-12
- utilization (UTIL) 1-14, 1-17
- lightning activity warning 2-4, C-3
- management options 1-23 to 1-24
- Mode button 1-14 to 1-16
- mounting
- desk 2-19
- rack 2-10 to 2-19
- shelf 2-19
- table 2-19
- mounting brackets, attaching 2-11 to 2-17
- MT-RJ
- connector B-2 to B-3
- patch cables 1-7
- network configuration examples 1-1
- noise, electrical 2-8
- no on/off switch warning 2-2, C-17 to C-18
- notes, defined xii
- obtaining documentation xvi to xvii
- overtemperature warning 2-2, C-15 to C-16
- package contents 2-8 to 2-9
- patch cables, MT-RJ 1-7
- PC, connecting to switch 2-37 to 2-39, B-9 to B-10
- performance problems, solving 3-3
- personnel warning 2-2, C-25 to C-26
- physical dimensions A-2 to A-3
- pinouts
- 10/100/1000 ports B-4
- 10/100 ports B-2
- adapters
- DB-25 B-11
- DB-9 B-10
- console port
- DB-25 adapter B-11
- DB-9 adapter B-10
- crossover cables
- four twisted-pair, 10/100 ports B-7
- four twisted-pair, 1000BASE-T ports B-8
- two twisted-pair B-6
- RJ-45-to-DB-25 terminal adapter B-11
- RJ-45-to-DB-9 PC adapter B-10
- RJ-45-to-DB-9 terminal adapter B-10
- straight-through cables
- four twisted-pair, 10/100 ports B-7
- four twisted-pair, 1000BASE-T ports B-8
- two twisted-pair B-6
- port
- LEDs 1-9 to 1-12, 1-13
- mode
- changing 1-14 to 1-16
- LEDs 1-9 to 1-12, 1-14 to 1-16
- selecting 1-14 to 1-16
- ports
- See 10/100 ports, 10/100/1000 ports, 100BASE-FX ports, GBIC module ports, and console ports
- POST
- description 2-29
- problems, solving 3-4
- problems,solving 3-2
- results 2-29
- power
- agency approvals A-4
- connecting to
- AC 2-19
- DC 2-20 to 2-29
- RPS 2-20
- requirements A-1 to A-3
- supply
- AC connector 1-22
- DC connector 1-22
- RPS connector 1-23
- warning 2-3, C-4 to C-6
- power connectors 1-22 to 1-23
- power on 2-19 to 2-20
- procedures
- connecting to DC power 2-20 to 2-29
- connection 2-30 to 2-39
- installation 2-10 to 2-19
- IP address 2-39
- power on 2-19 to 2-20
- product disposal warning 2-4, C-19 to C-20
- publications, related xv to xvi
- qualified personnel warning 2-2, C-25 to C-26
- rack-mounting
- bracket mounting points 2-11 to 2-17
- procedures 2-10 to 2-19
- warning 2-10, C-10 to C-14
- rear panel
- clearance 2-7
- console port connector 1-23
- described 1-20
- illustrated 1-21 to 1-22
- power connectors 1-22 to 1-23
- Redundant Power System
- See RPS
- regulatory statements, EMC 2-4 to 2-6
- related publications xv to xvi
- restricted access area warning 2-21, C-35 to C-36
- rollover cable B-9
- RPS
- connecting to 2-20
- connector 1-23
- described 1-23
- LED 1-9, 1-13
- warning 2-4, C-2
- safety agency approvals A-4
- safety warnings 2-2 to 2-4, C-1 to C-42
- shelf-mounting 2-19
- single SELV source warning 2-21, C-34 to C-35
- SNMP network management platforms 1-24
- software switch management 1-23 to 1-24
- specifications A-1 to A-4
- speed LED 1-14, 1-18
- stacking the chassis warning 2-2, C-24 to C-25
- status LED 1-14, 1-17
- straight-through cable
- connecting to
- 10/100/1000 ports 2-30
- 10/100 ports 2-30
- connectivity problems 3-4
- pinout
- four twisted-pair, 10/100 ports B-7
- four twisted-pair, 1000BASE-T ports B-8
- two twisted-pair B-6
- SunNet Manager 1-24
- supply circuit warning 2-3, C-26 to C-27
- switch, power-on 2-19 to 2-20
- system LED 1-12
- table-mounting 2-19
- technical assistance xviii to xx
- technical specifications A-1 to A-4
- Telnet, and accessing the CLI 1-24
- temperature
- operating A-1 to A-3
- warning 2-2, C-15 to C-16
- terminal, connecting to a switch 2-37 to 2-39, B-10 to B-11
- terminal-emulation software 2-37
- TN power warning 2-3, C-16 to C-17
- translated warnings C-1 to C-42
- troubleshooting 3-1
- diagnosing problems 3-2 to 3-4
- understanding POST results 3-2
- URLs, Cisco xvi
- utilization
- bandwidth 1-17 to 1-20
- LED 1-14, 1-17
- verifying package contents 2-8 to 2-9
- voltage warning 2-3, C-27 to C-28
- warnings
- DC power 2-20 to 2-21, 2-23 to 2-24
- defined xiii to xv
- installation 2-2 to 2-4
- translated C-1 to C-42
Posted: Thu Nov 7 12:18:36 PST 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.