Getting the Collection Manager Software

Table Of Contents

Getting the Collection Manager Software

Getting the Collection Manager Software

Getting the Collection Manager Software

This module describes how to get the Collection Manager software.

Getting the Collection Manager Software

Step 1 Logon to Cisco CCO http://www.cisco.com/cgi-bin/tablebuild.pl/sccm

Step 2 Download the relevant package

•SCMSCM_CD_Linux_3.1.0 for Red Hat Linux EL platform version 3 or 4 using the bundled Sybase database.

•SCMSCM_CD_Solaris_3.1.0 for Solaris platform version 9 or 10 using the bundled Sybase database.

•SCMSCM_CD_3.1.0 if you are not using the bundled Sybase database on either of the above platforms.

If there is a single file package go to Step 4.

Step 3 Ensure the names of the files reflect their order (e.g. cm_part1, cm_part2, etc.).

Step 4 Place the downloaded files on the target machine and join them into a single .tar file

For example:

# cat cm_part1 cm_part2 >/usr/tmp/cm_full_package.tar
Step 5 Extract the complete package into a temporary directory

For example:

# mkdir /usr/tmp/cm_install_temp # cd /usr/tmp/cm_install_temp # tar xvf ../cm_full_package.tar
Step 6 If you are upgrading from a previous version, go to Upgrading the CM.