This document will help you prepare your site for installing Cisco Systems' LightStream 2020 multiservice ATM switch (LS2020 switch). Using this document, you can:
Select an equipment rack and appropriate cables
Select space for the system in a computer room, wiring closet, or other suitable area
Ensure that the selected space meets LS2020 environmental and electrical requirements
Prepare the Sun workstation and operating environment for using the StreamView network management application
Obtain IP addresses for your LS2020 switches
Unpack an LS2020 switch
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more up to date than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
Note The Cisco Connection Documentation, Enterprise Series CD was previously called UniverCD.
"Welcome to Cisco" describes the support services provided by Cisco Systems.
"About This Manual" describes this manual's objectives, audience, organization, and lists related LS2020 documentation. This section also defines the document conventions used in this manual.
Chapter 3, "Connectors and Cables," describes the interconnection facilities for all the available access cards that you can install in an LS2020 chassis to meet a broad range of ATM communication requirements.
Appendix A, "IP Addresses," provides background information about IP addressing, masks, and subnets.
Introduces the LS2020 switch and the Asynchronous Transfer Mode (ATM) technology on which the LS2020 product is based. It describes traffic flow through an LS2020 network and presents key features, such as traffic and network management.
LightStream 2020 Site Planning and Cabling Guide
Provides guidelines you can use as you prepare your site to receive LS2020 hardware. It includes space, environmental, and electrical requirements; rack selection guidelines; requirements for the management workstation; and information on cables and connectors.
LightStream 2020 Installation Guide
Tells you how to install and set up LS2020 nodes and how to install StreamView management software on your network management workstation.
Describes LS2020 hardware components and tells you how to troubleshoot and diagnose component problems. It also provides procedures for configuring and replacing individual components and discusses the test and control system (TCS) hub commands.
LightStream 2020 Configuration Guide
Provides the information you need to configure LS2020 switches. It describes the configuration tools and the procedures for using them, introduces the configuration database, and defines all configurable attributes and their settings. The guide also provides step-by-step configuration procedures.
LightStream 2020 Network Operations Guide
Presents an overview of network tasks. It introduces the command line interface (CLI) and the graphical user interface (GUI), and it describes GUI-based monitoring procedures. The manual also describes facilities for viewing statistics and collecting traffic data.
LightStream 2020 CLI Reference Manual
Presents the syntax and functions of all CLI commands and describes the LS2020 private MIB.
LightStream 2020 Command Line Interface (CLI) Reference Card
Compactly summarizes the syntax and arguments for all CLI commands.
LightStream 2020 Traps Reference Manual
Discusses LS2020 traps and outlines the procedures used to determine whether traps will be logged and where they will be viewed. The manual also describes the major SNMP, operational, and informational traps.
LightStream 2020 NP O/S Reference Manual
Discusses the most frequently used LynxOS commands and the bash shell. It also provides a tutorial and reference guide for the vi editor.
Upgrade procedures outline steps involved in upgrading software. Release notes describe new features and special considerations (including known software bugs). Release notes and upgrade procedures are provided for both the platform software and the network management software.
Note The upgrade procedures and release notes include important information that was not available at the time the formal user documents were printed.
LightStream 2020 online help
The LS2020 CLI and GUI network management tools include an online help facility.
Internetworking Terms and Acronyms
Presents a lexicon of internetworking terms and acronyms and includes material of specific interest to LS2020 users.