cc/td/doc/product/wanbu/vns/vns_30
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Cable Information

Cable Information

This appendix provides information about the VNS AC power cables, Frame Relay Card cables, and includes an illustration of a sample null modem cable.

AC Power Cabling

Cable

Cisco provides a 6-foot (1.8m), 3-conductor cord with an IEC 320 C-13 appliance coupler for mating with the VNS on the system end. The other end of the power cord should be a grounding-type attachment plug as described in the paragraphs that follow.

Connector

The AC power cable can be ordered with the following connectors:

For those countries not appearing in the preceding list, use a power cord with an IEC 320 C-13 appliance coupler for the system-end and an appropriate grounding-type attachment plug at the other end in accordance with local standards.

Source-end connector information is not available for all countries, so local codes must be known or obtained by either the customer or installer.

Frame Relay Card Cables

Cisco provides two cable options for connecting the VNS's Frame Relay Card to the IGX or IPX switch:

Sample Null Modem Cable

The figure below shows a typical null modem cable. Cisco does not supply this cable.


Figure A-1: Null Modem Cable



hometocprevnextglossaryfeedbacksearchhelp
Copyright 1989-1998 © Cisco Systems Inc.