I

Table Of Contents

I

idletimeout (ccn trigger jtapi)

idletimeout (ccn trigger sip)

ip domain-name

ip name-server

I

idletimeout (ccn trigger jtapi)

idletimeout (ccn trigger sip)

ip domain-name

ip name-server

idletimeout (ccn trigger jtapi)

To specify the number of milliseconds to wait for a caller's response before the call is disconnected, use the idletimeout command in Cisco Unity Express CCN configuration trigger mode.

idletimeout milliseconds
Syntax Description

milliseconds

The number of milliseconds to wait for a caller's response before the call is disconnected. The default is 10,000 milliseconds.

Defaults

10,000 milliseconds

Command Modes

CCN configuration trigger

Command History

Cisco Unity Express Release

Modification

1.0

This command was introduced on the Cisco Unity Express network module and in Cisco CallManager Express 3.0.

1.1

This command was implemented on the advanced integration module (AIM) and in Cisco CallManager 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.

Examples

The following example sets the idle timeout to 15,000 milliseconds (15 seconds).

se-10-0-0-0# config t
se-10-0-0-0(config)# ccn trigger jtapi phonenumber 1234
se-10-0-0-0(config-trigger)# idletimeout 15000
se-10-0-0-0(config-trigger)# end
se-10-0-0-0(config)#
Related Commands

Command

Description

ccn trigger jtapi phonenumber

Enters trigger configuration mode.

show ccn trigger

Displays the CCN trigger details.

idletimeout (ccn trigger sip)

To specify the number of milliseconds to wait for a caller's response before the call is disconnected, use the idletimeout command in Cisco Unity Express CCN configuration trigger mode.

idletimeout milliseconds
Syntax Description

milliseconds

The number of milliseconds to wait for a caller's response before the call is disconnected. The default value is 10,000 milliseconds.

Defaults

10,000 milliseconds

Command Modes

CCN configuration trigger

Command History

Cisco Unity Express Release

Modification

1.0

This command was introduced on the Cisco Unity Express network module and in Cisco CallManager Express 3.0.

1.1

This command was implemented on the advanced integration module (AIM) and in Cisco CallManager 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.

Examples

The following example sets the idle timeout to 15,000 milliseconds (15 seconds).

se-10-0-0-0# config t
se-10-0-0-0(config)# ccn trigger sip phonenumber 1234
se-10-0-0-0(config-trigger)# idletimeout 15000
se-10-0-0-0(config-trigger)# end
se-10-0-0-0(config)#
Related Commands

Command

Description

ccn trigger sip phonenumber

Enters trigger configuration mode.

show ccn trigger

Displays the CCN trigger details.

ip domain-name

To configure the domain name server (DNS) domain name, use the ip domain-name command in Cisco Unity Express configuration mode. To delete the domain name, use the no form of this command.

ip domain-name dns-server-domain-name
no ip domain-name
Syntax Description

dns-server-domain-name

Domain name for the DNS server.

Defaults

No domain name is configured.

Command Modes

Cisco Unity Express configuration

Command History

Cisco Unity Express Release

Modification

1.0

This command was introduced on the Cisco Unity Express network module and in Cisco CallManager Express 3.0.

1.1

This command was implemented on the advanced integration module (AIM) and in Cisco CallManager 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.

Usage Guidelines

Use this command with the ip name-server command to configure the DNS server.

Examples

The following example changes the domain name to mycompany.com:

se-10-0-0-0# config t
se-10-0-0-0(config)# ip domain-name mycompany.com
se-10-0-0-0(config)# ip name-server 10.0.61.1

Related Commands

Command

Description

hostname

Specifies the server that stores the Cisco Unity Express applications.

ip name-server

Specifies the DNS server name.

ntp server

Specifies the NTP clocking server.

show hosts

Displays all configured hosts.

show ip route

Displays IP route destinations, gates, and masks.

ip name-server

To configure the IP address of the domain name server (DNS), use the ip name-server command in Cisco Unity Express configuration mode. To delete the name server, use the no form of this command.

ip name-server ip-address [ip-address] [ip-address] [ip-address]
no ip name-server ip-address
Syntax Description

ip-address

IP address of the DNS server.

Defaults

No name server is configured.

Command Modes

Cisco Unity Express configuration

Command History

Cisco Unity Express Release

Modification

1.0

This command was introduced on the Cisco Unity Express network module and in Cisco CallManager Express 3.0.

1.1

This command was implemented on the advanced integration module (AIM) and in Cisco CallManager 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.

Usage Guidelines

Up to four DNS servers may be configured. Use this command with the ip domain-name command to configure the DNS server.

Examples

The following example changes the IP name server to 10.3.61.16:

se-10-0-0-0# config t
se-10-0-0-0(config)# ip name-server 10.3.61.16
se-10-0-0-0(config)# ip domain-name mycompany.com
Related Commands

Command

Description

hostname

Specifies the server that stores the Cisco Unity Express applications.

ip domain-name

Specifies the DNS domain name.

ntp server

Specifies the NTP clocking server.

show hosts

Displays all configured hosts.

show ip route

Displays IP route destinations, gates, and masks.

Cisco Unity Express Release	Modification
1.0	This command was introduced on the Cisco Unity Express network module and in Cisco CallManager Express 3.0.
1.1	This command was implemented on the advanced integration module (AIM) and in Cisco CallManager 3.3(3).
1.1.2	This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.

Command	Description
ccn trigger jtapi phonenumber	Enters trigger configuration mode.
show ccn trigger	Displays the CCN trigger details.

Command	Description
ccn trigger sip phonenumber	Enters trigger configuration mode.
show ccn trigger	Displays the CCN trigger details.

Command	Description
hostname	Specifies the server that stores the Cisco Unity Express applications.
ip name-server	Specifies the DNS server name.
ntp server	Specifies the NTP clocking server.
show hosts	Displays all configured hosts.
show ip route	Displays IP route destinations, gates, and masks.

Command	Description
hostname	Specifies the server that stores the Cisco Unity Express applications.
ip domain-name	Specifies the DNS domain name.
ntp server	Specifies the NTP clocking server.
show hosts	Displays all configured hosts.
show ip route	Displays IP route destinations, gates, and masks.