index

Numerics

index

Numerics

100BaseT

: See Ethernet

10BaseT

: See Ethernet

A

: AC power supply specifications 1-3
: attaching brackets 3-5, 3-6
: audience, for this document ix
: auxiliary port, connecting devices to 3-15

B

baffles and cooling air 2-6

baud rate, console terminal 3-14, 3-16

board layout B-5

boot

: ROM monitor C-4
: system images, recovering C-8

brackets

attaching 3-5

attaching to chassis (figure) 3-8, 3-9

attaching wall-mount (figure) 3-9

identifying (figure) 3-5

installing, front panel forward (figure) 3-6, 3-7

: see also installation

installing, rear panel forward (figure) 3-7

telco, installing (figure) 3-8

brackets, installing 3-4, 3-4 to 3-11

C

caution

: chassis-cover replacement B-11
: DIMM handling B-6
: ESD 2-4
: Flash memory SIMM replacement B-8
: for desk and table mounting 3-4
: SIMM handling B-9, B-10

chassis

: closing B-11
: ground 2-4
: opening B-3
: power supply considerations 2-6
: rack-mounting 3-4
: removing cover, (figure) B-4, B-12
: removing cover, holding (figure) B-4
: site, requirements 2-5
: wall-mounting 3-9
: weight 1-2

Cisco Connection Online xii

commands

: configuration register C-6
: context C-6
: debugging C-6
: dir C-5
: frame C-6
: help C-5
: meminfo C-5
: reset C-6
: ROM monitor diagnostics x, C-1
: stack C-6
: sysret C-6
: tftpdnld C-6
: xmodem C-8

configuration

: equipment-rack 2-6

configuration, site 2-5

configuration register command

: changing settings C-6

connecting

: console terminal (figure) 3-15
: Ethernet hub (figure) 3-12
: modem (figure) 3-16

connections

: console terminal 3-13
: Ethernet 2-7
: Fast Ethernet (figure) 2-8
: modem 3-13
: network 2-7
: preparing for network 2-1

console port

: baud rate settings 3-14, 3-16
: connecting devices to 3-14

console terminal, connecting (figure) 3-15

context command C-6

conventions, documentation xi

cooling recommendations 2-6

cover

: removal B-3
: replacement caution B-11

customer service xii

D

DC power, supply specifications 1-3

debugging commands C-6

desktop

: installation
: mount caution 3-4

dimensions, chassis 1-2

DIMM

: handling caution B-6

dir command C-5

documentation

: conventions xi
: objectives ix
: ordering xiii
: organization x
: referenced and related ix
: software configuration ix

DRAM

: description 1-2
: DIMM, removing/replacing (figure) B-7

dynamic random-access memory, See DRAM

E

EIA/TIA-232

: auxiliary port connections 3-15
: console port connections 3-14

electricity, safety guidelines 2-2

electrostatic discharge

: See ESD prevention

environment

: operating and nonoperating 1-3
: site 2-5

equipment-rack configuration 2-6

ESD prevention 2-4

Ethernet

: 10Base2 2-7
: 10Base5 2-7
: 10BaseT 2-8
: connections 2-7

Ethernet hub, connecting (figure) 3-12

F

fan noise level 1-3

Fast Ethernet connections

: Cisco VG200 2-8

FCC 1-4

features, hardware 1-1

feet, installing

Flash memory, replacing SIMMs B-8

frame command C-6

G

: general site requirements 2-5
: ground, chassis 2-4

H

hardware

: features 1-1
: installation procedures 3-1 to 3-16
: specifications 1-2
: troubleshooting procedures A-1 to A-5
: what to do after installing 3-16

help, technical xii

help command C-5

humidity specification 1-3

I

identifying the rubber feet (figure) 3-3

installation

: brackets
: desktop
: general site requirements 2-5 to 2-7
: network connections 3-11
: preparing for 2-1
: rack-mount 3-4
: safety recommendations 2-1
: system-code SIMMs B-8
: tools, parts, and equipment required 3-2
: wall-mount 3-9

L

LAN connections 3-11

layout, system card (figure) B-5

LEDs

: illustrated 1-2
: reading A-3

M

maintenance procedures B-1

meminfo command C-5

memory, system-code SIMMs (Flash memory) B-8

modem

: connecting (figure) 3-16

modem, connecting 3-15

mounting

: See rack equipment 2-6

mounting chassis on wall (figure) 3-11

N

nonoperating temperature 1-3

nonvolatile random-access memory

: See NVRAM

NVRAM 1-2

O

Obtaining xii

opening the chassis B-2, B-3

operating environment 1-3

ordering

: cables (contact customer service) xii

P

power

: specifications (AC and DC) 1-3
: supply considerations 2-6

precautions, operating environment 2-5

procedures

installation 3-1 to 3-16

maintenance B-1

opening the chassis B-4

replacing

: chassis cover B-11
: system-code SIMMs B-8

troubleshooting A-1 to A-5

processor specification 1-3

R

rack equipment

: configuration 2-6
: installation 3-4

rack-mounting chassis 3-4

rear panel

: Cisco 2620 (figure) 1-2

recovering boot and system images C-8

removing

: DRAM DIMM B-7
: system-code SIMM B-10

removing, chassis cover B-11

replacing

: chassis cover B-11
: Flash memory SIMM B-9
: system-code SIMMs B-8

requirements site 2-5

reset command C-6

rollover cable

: identifying 3-13

rollover cable (figure) 3-13

rollover cable, identifying 3-13

ROM monitor diagnostics commands C-6

rubber feet

installing

: see also installation

installing (figure) 3-4

rubber feet (figure) 3-3

S

safety

: ESD 2-4
: general guidelines 2-1, 2-7
: warnings 2-2
: warnings translated xii

service and support xii

SIMM

: handling caution B-9
: replacing B-8
: system-code (Flash) B-8

site requirements 2-5

software

: backing up before replacing SIMMs B-8
: replacing system-code SIMMs B-8

specifications 1-2 to 1-3

stack command C-6

static electricity prevention 2-4

support xii

sysret command C-6

system card layout (figure) B-5

system-code, replacing SIMMs B-8

system-code SIMM, removing/replacing (figure) B-10

T

table-mount caution 3-4

technical support xii

temperature specification 1-3

terminal, connecting 3-13

tftpdnld command C-6

tools required for

: DRAM SIMM replacement B-3
: installation 3-2
: system-code SIMM replacement B-8

translated safety warnings xii

troubleshooting procedures A-1 to A-5

V

: ventilation recommendations 2-6

W

wall-mounting the chassis 3-9

warning

: installation 2-3
: safety 2-2

weight, chassis 1-2

X

: xmodem command C-8

Table of Contents

index