cc/td/doc/product/rtrmgmt/cw2000/me_1100
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

index

index

Numerics

10/100 port, warning regarding   2-3

100BaseTX port, warning regarding   2-3

10BaseT port, warning regarding   2-3

A

AC

power (see safety information)
units and power cords, warning regarding   2-2
administering management services   4-7  to 4-8

removing management services   4-8
caution regarding   4-8
starting and stopping management services   4-8
viewing services log information   4-9
administrator passwords, recovering from loss of   4-12  to 4-13

audience for this document   xix

B

battery replacement, warning regarding   2-3

booting from the maintenance image   4-11  to 4-12

C

cabling (see safety information)

cautions

regarding
clock, setting manually   4-6
clock, setting using NTP   4-5
DNS configuration   4-6
erase config command   C-20
erase services command   C-21
installing heavier equipment at the bottom of a rack   3-4
installing unit on rack, site and environmental conditions for   3-3
management services, removing   4-8
NTP and the system clock   4-5
powering-off the system   C-40
reconfiguring after initial configuration   4-12
setting the clock manually   4-6
setting the clock using NTP   4-5
shutdown command   C-40
significance of   xx
circuit breakers

and DC units, warning regarding   2-2
and fuses, warning regarding   2-2
and short circuits, warning regarding   2-2
CLI conventions   C-2

clock

caution regarding setting
manually   4-6
using NTP   4-5
clock command   C-17  to C-18
command reference   C-1  to C-48

CLI conventions   C-2
command privileges   C-2
command syntax, checking   C-2
conventions
CLI   C-2
in descriptions   C-6
privilege level 0 commands   C-7  to C-17
exit   C-7
help   C-7  to C-8
ping   C-8  to C-9
show ?   C-9  to C-10
show clock   C-11
show interfaces   C-12  to C-13
show process   C-13  to C-14
show version   C-14  to C-15
traceroute   C-16  to C-17
privilege level 15 commands   C-17  to C-47
clock   C-17  to C-18
erase config   C-19  to C-20
erase services   C-20  to C-21
hostname   C-21  to C-22
interface   C-22  to C-23
ip domain-name   C-24
ip name-server   C-25  to C-26
no   C-26  to C-27
ntp server   C-28  to C-29
reload   C-30
services   C-31  to C-32
show bootlog   C-32  to C-33
show config   C-33  to C-34
show serviceslog   C-36  to C-37
show syslog   C-38  to C-39
show tech   C-39  to C-40
shutdown   C-40  to C-41
snmp-server ?   C-41  to C-42
snmp-server community   C-42  to C-43
snmp-server contact   C-43  to C-44
snmp-server location   C-44  to C-45
snmp-server name   C-45  to C-46
username   C-46  to C-47
summary of commands (table)   C-3  to C-6
syntax checking   C-2
system help   C-3
configuring

DNS   4-6  to 4-7
ME1100  Series (see installing and configuring the ME1100 Series)
SNMP   4-7
configuring DNS

caution regarding   4-6
console cable specifications (see safety information, cabling specifications)

conventions

CLI   C-2
command description   C-6
typographical, in this document   xix  to xxii
creating and removing user accounts   4-2

D

date and time, setting   4-5  to 4-6

manually   4-6
caution regarding   4-6
using NTP   4-5
caution regarding   4-5
DC units, warning regarding   2-2

disk file system, maintaining   4-13

DNS, configuring   4-6  to 4-7

caution regarding   4-6
documentation

audience for this   xix
conventions used in   xix  to xxii
related   xxii

E

electricity (see safety information)

electromagnetic interference (EMI) (see safety information)

electrostatic discharge (see safety information)

EMI (electromagnetic interference) (see safety information)

equipment and tools required for installation   2-14

erase config command   C-19  to C-20

caution regarding   C-20
erase services command   C-20  to C-21

Ethernet cabling considerations (see safety information)

exit command   C-7

F

fuses and short circuits, warning regarding   2-2

G

ground conductor, warning regarding defeating   2-2

grounding during normal use, warning regarding   2-2

H

help

command   C-3
system   C-3
technical support   xxiii  to xxiv
(see also troubleshooting)
hostname command   C-21  to C-22

I

installation instructions, warning regarding reading thoroughly   2-3

installing and configuring the ME1100 Series

installing a replacement device
removing the old system   3-13
tools and equipment required   2-14
installing and configuring the ME1100 Series   3-1  to 3-14

configuring the system with the setup program   3-8  to 3-10
connecting cables   3-6  to 3-7
connecting to power source   3-6
installation and service   3-2
installing a replacement device   3-12  to 3-14
installing a new system   3-13  to 3-14
physical installation   3-2  to 3-5
caution regarding placement of heavier equipment   3-4
caution regarding site conditions   3-3
in a rack   3-3  to 3-5
on a desktop   3-5
powering up   3-7
shutting down and reloading the system   4-4
verifying the configuration   3-10  to 3-12
interface command   C-22  to C-23

ip domain-name command   C-24

ip name-server command   C-25  to C-26

J

jewelry, warning regarding removing before working on system   2-3

L

lightning, warning regarding   2-3

M

maintenance image, using   4-10  to 4-13

booting from   4-11  to 4-12
maintaining the disk file system   4-13
recovering from loss of administrator passwords   4-12  to 4-13
management services, administering   4-7  to 4-9

removing   4-8
caution regarding   4-8
services log information, viewing   4-9
starting and stopping   4-8
ME1100 Series

administration   4-1  to 4-13
overview   1-1  to 1-3
parts identification   1-1  to 1-3
technical specifications   B-1  to B-2

N

no command   C-26  to C-27

notes, significance of   xx

NTP

ntp server command   C-28  to C-29
setting system date and time using   4-5
and system clock, caution regarding   4-5

P

passwords

administrator, recovering from loss of   4-12  to 4-13
user account, changing   4-3
personnel, warning regarding proper training   2-2

ping command   C-8  to C-9

pinouts (see safety information, cabling considerations)

power

systems used with ME1100 Series, warning regarding   2-3
turning off before work on system, warning regarding   2-3
privilege level

0 commands (see command reference)
15 commands (see command reference)
for user accounts, changing   4-3
product disposal, warning regarding   2-3

properties of user accounts, changing   4-3

R

rack-mounting the system   2-12  to 2-14

ensuring proper airflow   2-13
lifting the system   2-14
stabilizing the system   2-13  to 2-14
rack stability, warning regarding   2-12

reconfiguring after initial configuration, caution regarding   4-12

reload command   C-30

removing and creating user accounts   4-2

required tools and equipment   2-14

S

safety cover, warning regarding   2-2

safety extra-low voltage (SELV) circuits, warning regarding   2-3

safety information   2-1  to 2-6

(see also cautions and warnings)
AC power considerations   2-8
cabling considerations   2-8  to 2-12
console cable and adapter   2-10  to 2-11
Ethernet cabling and standards   2-8  to 2-10
pinouts for console cable   2-10  to 2-11
pinouts for Ethernet cable   2-8  to 2-11
rollover cable   2-11  to 2-12
electricity, working with   2-4  to 2-5
electromagnetic interference (EMI), preventing   2-5
electrostatic discharge, preventing damage from   2-5
empty slots, covering   2-6
rack-mounting the system   2-12  to 2-14
ensuring proper airflow   2-13
lifting the system   2-14
stabilizing the system   2-13  to 2-14
site preparation   2-6  to 2-12
environment   2-6  to 2-7
grounding the system   2-7
site selecting   2-7
working with electricity   2-4  to 2-5
SELV circuits, warning regarding   2-3

services command   C-31  to C-32

show ? command   C-9  to C-10

show bootlog command   C-32  to C-33

show clock command   C-11

show config command   C-33  to C-34

show interfaces command   C-12  to C-13

show process command   C-13  to C-14

show serviceslog command   C-36  to C-37

show syslog command   C-38  to C-39

show tech command   C-39  to C-40

show version command   C-14  to C-15

shutdown command   C-40  to C-41

shutting down and reloading the system   4-4

site preparation   2-6  to 2-12

environment   2-6  to 2-7
safety guidelines   2-7
grounding the system   2-7
site selection   2-7
site selection, warning regarding   2-7

slots, empty (see safety information)

SNMP, configuring   4-7

snmp-server ? command   C-41  to C-42

snmp-server community command   C-42  to C-43

snmp-server contact command   C-43  to C-44

snmp-server location command   C-44  to C-45

snmp-server name command   C-45  to C-46

syntax checking   C-2

system administration   4-1  to 4-13

configuring network interfaces   4-6
maintenance image, using   4-10  to 4-13
administrator passwords, recovering from loss of   4-12  to 4-13
booting from   4-11  to 4-12
maintaining the disk file system   4-13
system date and time
caution regarding manual setting   4-6
caution regarding NTP-type setting   4-5
setting   4-5  to 4-6
setting manually   4-6
setting using NTP   4-5
user accounts   4-2  to 4-3
creating and removing   4-2
passwords, changing   4-3
privilege levels, changing   4-3
properties of, changing   4-3
system information, viewing   4-9

T

technical specifications   B-1  to B-2

agency approvals   B-2
connectors   B-2
CPU   B-1
current   B-1
dimensions   B-1
hard disk storage   B-1
humidity, operating   B-2
maximum station-to-station cabling distance   B-2
memory   B-1
placement   B-2
power   B-1
temperature   B-2
weight   B-1
technical support   xxiii  to xxiv

(see also system help and troubleshooting)
Technical Assistance Center (TAC)   xxiv
time and date, setting   4-5  to 4-6

manually   4-6
caution regarding   4-6
using NTP   4-5
caution regarding   4-5
TN power systems, warning regarding   2-3

tools required for installation   2-14

traceroute command   C-16  to C-17

troubleshooting

cannot connect to system with Telnet or Telnet interaction is slow   A-6  to A-7
cannot connect to the system using a web browser   A-4  to A-5
cannot log in to the system   A-2
system cannot boot from disk   A-5  to A-6
system cannot connect to the network   A-2  to A-4
system time or date is incorrect   A-5

U

user accounts

creating and removing   4-2
properties of, changing   4-3
passwords   4-3
privilege levels   4-3
username command   C-46  to C-47

V

viewing system information   4-9

W

warnings

regarding
10/100 port   2-3
100BaseTX port   2-3
10BaseT port   2-3
AC units and power cords   2-2
battery replacement   2-3
circuit breakers and DC units   2-2
circuit breakers or fuses, and short-circuits   2-2
DC units and circuit breakers   2-2
defeating the ground conductor   2-2
ensuring grounding   2-2
fuses or circuit breakers, and short circuits   2-2
ground conductor, defeating   2-2
grounding, ensuring during normal use   2-2
installation instructions, reading   2-3
installation site selection   2-7
jewelry and other metal items   2-3
lightning   2-3
personnel   2-2
power cord on AC units   2-2
power off during work on system   2-3
power systems intended for use with ME1100 Series   2-3
product disposal   2-3
rack-mounting and stability   2-12
safety cover   2-2
safety extra-low voltage (SELV) circuits   2-3
SELV (safety extra-low voltage) circuits   2-3
short-circuiting and fuses or circuit breakers   2-2
stability of rack-mounted systems   2-12
system disposal   2-3
TN power systems   2-3
unit disposal   2-3
significance of   xx

hometocprevnextglossaryfeedbacksearchhelp
Posted: Wed Oct 2 19:10:47 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.