|
Table Of Contents
Supported Redback Network Elements
Supported Redback Network Elements
This section contains:
• Supported Network Elements for Redback
• Supported Software Versions for Redback
• Supported Modules for Redback
• Supported Technologies on Redback
• Supported Topologies for Redback
• Supported Protocols for Configuration Archive for Redback
The Redback VNE is not part of the ANA 4.0 DVD. You can download this VNE package from Cisco.com:
http://www.cisco.com/cgi-bin/tablebuild.pl/noncisco-vneSupported Network Elements for Redback
Table 115 Supported Network Elements for Redback
Device Type sysObjectID Certification LevelSMS 10000
.1.3.6.1.4.1.2352.1.4
V
SMS 1800
.1.3.6.1.4.1.2352.1.3
V
Supported Software Versions for Redback
Supported Modules for Redback
Supported Technologies on Redback
The supported technologies on Redback are:
•ARP
•Ethernet
•IP
For detailed support on the technologies, see Cisco Active Network Abstraction VNE Reference—Addendum on Cisco.com.
Supported Topologies for Redback
Table 118 Supported Topologies for Redback
Topology Type Topology Discovery Technique Topology Verification Technique Additional InformationPhysical Layer
Static
—
You can create a static link between managed network elements by selecting the two end ports of the network elements. To create a static topological link, select the exact location of the two end ports (at both ends of the link).
For information on creating a static link, see Cisco Active Network Abstraction 4.0 User and Administration Guide on Cisco.com:
http://www.cisco.com/en/US/products/ps6776/products_user_guide_list.html
Ethernet
MAC address
Ethernet counters
—
Supported Protocols for Configuration Archive for Redback
Note Network Image Management application is not supported for Redback network elements.
Posted: Tue Sep 25 04:33:07 PDT 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.