Table Of Contents
Supported Lucent Network Elements
Supported Lucent Network Elements
This section contains:
•
Supported Network Elements for Lucent
• Supported Software Versions for Lucent
• Supported Modules for Lucent
• Supported Technologies on Lucent
• Supported Topologies for Lucent
• Supported Protocols for Configuration Archive for Lucent
The Lucent VNE is not part of the ANA 4.0 DVD. You can download this VNE package from Cisco.com: http://www.cisco.com/cgi-bin/tablebuild.pl/noncisco-vne
Supported Network Elements for Lucent
Table 111 Supported Network Elements for Lucent
Device Type
|
sysObjectID
|
Certification Level
|
BSTDX 9000
|
.1.3.6.1.4.1.277.1
|
V
|
CBX-500
|
.1.3.6.1.4.1.277.1
|
V
|
GX-550
|
.1.3.6.1.4.1.277.1
|
V
|
MAX TNT
|
.1.3.6.1.4.1.529.1.4
|
V
|
Supported Software Versions for Lucent
Table 112 Supported Software Versions for Lucent
Software Versions
|
Device Type
|
Certification Level
|
07.02.02.08
|
BSTDX 9000
|
V
|
07.02.04.19,
|
S
|
07.03.01.14
|
S
|
08.00.03.11
|
V
|
08.00.03.11
|
CBX-500
|
V
|
08.00.03.07
|
GX-550
|
V
|
08.00.03.11
|
S
|
09.01.01.04
|
S
|
09.01.01.13
|
V
|
9.0.4e17
|
MAX TNT
|
V
|
10.0.4e8
|
S
|
10.1.1e16
|
S
|
10.1.3e41
|
S
|
11.0.2e59
|
V
|
Supported Modules for Lucent
Table 113 Supported Modules for Lucent
Module Name
|
Device Type
|
Certification Level
|
atmcs-e3-1
|
BSTDX 9000
|
S
|
atmiwu-1
|
S
|
cp1
|
S
|
ft1-4-24
|
S
|
ft3-1
|
S
|
hssi-2
|
S
|
uio-8
|
S
|
fe1-4-30
|
S
|
e1-12
|
S
|
ads3-e3
|
CBX-500
|
S
|
gchn-e1t1-32
|
S
|
sp-40
|
S
|
toc3-atm-4
|
S
|
1 Port ATM OC12
|
S
|
4 Port ATM OC3
|
S
|
4 Port FastEthernet
|
S
|
Switching Processor 40
|
S
|
1 Port ATM OC12
|
S
|
1 Port ATM OC48
|
S
|
4 Port ATM OC3
|
S
|
1 Port ATM OC48
|
GX-550
|
S
|
1 Port ATM OC3
|
S
|
Node Processor 1
|
S
|
1 Port ATM OC12
|
S
|
10BaseT and 1 100BaseT interfaces
|
MAX TNT
|
S
|
Ethernet slot card with 2 Fast Ethernet interfaces
|
S
|
48 channel voice/modem card
|
S
|
48 channel modem card
|
S
|
8 line channelized E1
|
S
|
96 channel madd card
|
S
|
Shelf-controller
|
S
|
10 line unchannelized E1
|
S
|
Interface serial WAN
|
S
|
10BaseT and 1 100BaseT interfaces
|
S
|
Ethernet slot card with 4 10/100BASE-T interfaces
|
S
|
3 10BaseT and 1 100BaseT interfaces
|
S
|
Supported Technologies on Lucent
The supported technologies on Lucent are:
•ARP (MAX TNT only)
•Ethernet (MAX TNT only)
•IP
For detailed support on the technologies, see Cisco Active Network Abstraction VNE Reference—Addendum on Cisco.com.
Supported Topologies for Lucent
You can create a static link between managed network elements by selecting the two end ports of the network elements. To create a static topological link, select the exact location of the two end ports (at both ends of the link).
For information on creating a static link, see Cisco Active Network Abstraction 4.0 User and Administration Guide on Cisco.com:
http://www.cisco.com/en/US/products/ps6776/products_user_guide_list.html
Supported Protocols for Configuration Archive for Lucent
Table 114 Supported Protocols for Configuration Archive for Lucent
Functionality
|
SNMP
|
Telnet
|
When request is from VNE
|
Fetching configuration
|
No
|
Yes
|
Fetching configuration timestamp
|
No
|
Yes
|
When request is from Configuration Archive application
|
Fetching the configuration
|
Yes
|
No
|
Deploying the configuration
|
Yes
|
No
|
Note Network Image Management application is not supported for Lucent network elements.
