|
|
Table Of Contents
Supported UTStarcom Network Elements
Supported UTStarcom Network Elements
This section contains:
•
Supported Network Element for UTStarcom
•
•
•
•
•
The UTStarcom VNE is not part of the ANA 4.0 DVD. You can download this VNE package from Cisco.com:
http://www.cisco.com/cgi-bin/tablebuild.pl/noncisco-vneSupported Network Element for UTStarcom
Table 120 Supported Network Element for UTStarcom
AN-2000
.1.3.6.1.4.1.1949.1.3.3
V
Supported Software Version for AN-2000
Table 121 Supported Software Version for AN-2000
Default version
AN-2000
V
Supported Modules for AN-2000
Table 122 Supported Modules for AN-2000
IP-ADSL module
S
PCU module
S
ICM module
S
Supported Technologies on AN-2000
The supported technologies on AN-2000 are:
•
•
•
For detailed support on the technologies, see Cisco Active Network Abstraction VNE Reference—Addendum on Cisco.com.
Supported Topologies for AN-2000
You can create a static link between managed network elements by selecting the two end ports of the network elements. To create a static topological link, select the exact location of the two end ports (at both ends of the link).
For information on creating a static link, see Cisco Active Network Abstraction 4.0 User and Administration Guide on Cisco.com:
http://www.cisco.com/en/US/products/ps6776/products_user_guide_list.html
Supported Protocols for Configuration Archive for AN-2000
Note
Posted: Tue Sep 25 04:35:41 PDT 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.
