Supported ECI Network Element

Table Of Contents

Supported ECI Network Elements

Supported ECI Network Elements

This section contains:

• Supported Network Element for ECI

• Supported Software Version for ECI-HiFocus

• Supported Modules for ECI-HiFocus

• Supported Technologies on ECI-HiFocus

• Supported Topologies for ECI-HiFocus

The ECI VNE is not part of the ANA 4.0 DVD. You can download this VNE package from Cisco.com: http://www.cisco.com/cgi-bin/tablebuild.pl/noncisco-vne

Supported Network Element for ECI

Table 108 Supported Network Element for ECI

Device Type

sysObjectID

Certification Level

ECI-HiFocus

.1.3.6.1.4.1.1286.1.3

V

Supported Software Version for ECI-HiFocus

Table 109 Supported Software Versions for ECI-HiFocus

Software Versions

Device Type

Certification Level

b4.97.11

ECI-HiFocus

S

b5.35

S

b5.38

S

5.8x

V

8.10x

S

Supported Modules for ECI-HiFocus

Table 110 Supported Modules for ECI-HiFocus

Module Name

Certification Level

ADSL POTS

S

FEM connected to PEM 14 on Main Shelf

S

FEM connected to PEM 15 on Main Shelf

S

OPTI S/H ROW B

S

PEM connected to FEM on Shelf 14

S

TANI-S1 S/H ROW

S

Supported Technologies on ECI-HiFocus

The supported technologies on ECI-HiFocus are:

•ARP

•IP

For detailed support on the technologies, see Cisco Active Network Abstraction VNE Reference—Addendum on Cisco.com.

Supported Topologies for ECI-HiFocus

You can create a static link between managed network elements by selecting the two end ports of the network elements. To create a static topological link, select the exact location of the two end ports (at both ends of the link).

For information on creating a Static link, see Cisco Active Network Abstraction 4.0 User and Administration Guide on Cisco.com:

http://www.cisco.com/en/US/products/ps6776/products_user_guide_list.html

Module Name	Certification Level
ADSL POTS	S
FEM connected to PEM 14 on Main Shelf	S
FEM connected to PEM 15 on Main Shelf	S
OPTI S/H ROW B	S
PEM connected to FEM on Shelf 14	S
TANI-S1 S/H ROW	S