Supported Alcatel Network Elements

This section contains:

• Supported Network Elements for Alcatel

• Supported Software Versions for Alcatel

The Alcatel VNE is not part of the ANA 4.0 DVD. You can download this VNE package from Cisco.com: http://www.cisco.com/cgi-bin/tablebuild.pl/noncisco-vne

Supported Network Elements for Alcatel

Table 105 Supported Network Elements for Alcatel
Device Type	sysObjectID	Certification Level
ASAM 1000 R3/4 (ASAM 7300)	.1.3.6.1.4.1.637.61.1	V
MINI-RAM	.1.3.6.1.4.1.637.61.1	S

Supported Software Versions for Alcatel

Table 106 Supported Software Versions for Alcatel
Software Versions	Device Type	Certification Level
3.1.0	ASAM 1000 R3/4 (ASAM 7300)	V
4.1.3.0		S
4.1.5.6		S
4.2		S
4.2.0.6		S
4.2.1.0		V
4.5.0		S
5.0		S
5.0.1.2		S
5.0.1.3		S
5.1.0.10		S
5.1.0.21		S
4.2SD		S
3.1.0	MINI-RAM	S
4.1.3.0		S
4.1.5.6		S
4.2		S
4.2.0.6		S
4.2.1.0		S
4.5.0		S
5.0		S
5.0.1.2		S
5.0.1.3		S
5.1.0.10		S
5.1.0.21		S
4.2SD		S

Supported Modules for Alcatel

Table 107 Supported Modules for Alcatel
Module Name	Device Type	Certification Level
ADSL (Euro) Line termination version F (ISDN support, 4 lines)	ASAM 1000 R3/4 (ASAM 7300)	S
ADSL Alarm Control Unit version A (R3 equipment)		S
ADSL Alarm Control Unit version C (R4 equipment)		S
ADSL Line termination version C (4 lines)		S
ADSL Line termination version E (4 lines)		S
ADSL Line termination version J (12 lines)		S
ADSL Line termination version L (24 lines)		S
ADSL Serial Extender version A,B		S
E1 (IMA) Line termination version A (4 lines)		S
GANT-A motherboard and SONI-A daughter board (PLIM)		S
GANT-B motherboard and SONI-A daughter board (PLIM)		S
Synchronous (STM1) ATM network termination version D		S
Multi ADSL Line termination version D (24 lines)		S
SHDSL Line termination version B (12 lines)		S
(Quad) E1 (IMA) network termination version A	MINI-RAM	S
ADSL Line termination version E (4 lines)		S
MiniRAM ACU version A		S

Supported Technologies on Alcatel

The supported technologies on Alcatel are:

•ARP

•IP

For detailed support on the technologies, see Cisco Active Network Abstraction VNE Reference—Addendum on Cisco.com.

Supported Topologies for Alcatel

You can create a static link between managed network elements by selecting the two end ports of the network elements. To create a static topological link, select the exact location of the two end ports (at both ends of the link).

For information on creating a Static link, see Cisco Active Network Abstraction 4.0 User and Administration Guide on Cisco.com:

http://www.cisco.com/en/US/products/ps6776/products_user_guide_list.html

Table Of Contents

Supported Alcatel Network Elements