Supported ADC Network Element

Table Of Contents

Supported ADC Network Element

Supported ADC Network Element

This section contains:

• Supported Network Element for ADC

• Supported Software Version for BA40

• Supported Modules for BA40

• Supported Technologies on BA40

• Supported Topologies for BA40

The ADC VNE is not part of the ANA 4.0 DVD. You can download this VNE package from Cisco.com: http://www.cisco.com/cgi-bin/tablebuild.pl/noncisco-vne

Supported Network Element for ADC

Table 102 Supported Network Element for ADC

Device Type

sysObjectID

Certification Level

BA40

1.3.6.1.4.1.3321.2.2

V

Supported Software Version for BA40

Table 103 Supported Software Version for BA40

Software Versions

Device Type

Certification Level

Default version

BA40

V
(12.2(15)T11 and 12.2(8)T10)

Supported Modules for BA40

Table 104 Supported Modules for BA40

Module Name

Description

Certification Level

ATM -UNI -STM1

—

S

ATMX-E

Located in ATM Matrix slots (14,15) in the RU

S

ATMX-UNI

Sonet/SDH port located in ATM Matrix slots (14,15). This is used to connect to the ATM cloud in the CU

S

CTP, CTPE

Control modules. Not available as part of the model

S

LI-16CU/RU

—

S

LI-4e1 CF

—

S

LI-ADSL16P

ADSL 16 ports

S

LI-ADSL8P

ADSL 8 ports

S

LI16-CU-E

16 ports POTS. Not available as part of the model.

S

STM4-AE

Sonet/SDH 1 port located in transmission slots (18,19)

S

Supported Technologies on BA40

Only physical inventory is supported. For detailed support on the technologies, see Cisco Active Network Abstraction VNE Reference—Addendum on Cisco.com.

Supported Topologies for BA40

You can create a static link between managed network elements by selecting the two end ports of the network elements. To create a static topological link, select the exact location of the two end ports (at both ends of the link).

For information on creating a Static link, see Cisco Active Network Abstraction 4.0 User and Administration Guide on Cisco.com:

http://www.cisco.com/en/US/products/ps6776/products_user_guide_list.html

Module Name	Description	Certification Level
ATM -UNI -STM1	—	S
ATMX-E	Located in ATM Matrix slots (14,15) in the RU	S
ATMX-UNI	Sonet/SDH port located in ATM Matrix slots (14,15). This is used to connect to the ATM cloud in the CU	S
CTP, CTPE	Control modules. Not available as part of the model	S
LI-16CU/RU	—	S
LI-4e1 CF	—	S
LI-ADSL16P	ADSL 16 ports	S
LI-ADSL8P	ADSL 8 ports	S
LI16-CU-E	16 ports POTS. Not available as part of the model.	S
STM4-AE	Sonet/SDH 1 port located in transmission slots (18,19)	S