|
Table Of Contents
Cisco Catalyst 2950 Series Switches
Supported Network Element for Cisco Catalyst 2950 Series Switches
Supported Software Version for Cisco Catalyst 2950 Series Switches
Supported Modules for Cisco Catalyst 2950 Series Switches
Supported Technologies on Cisco Catalyst 2950 Series Switches
Supported Topologies for Cisco Catalyst 2950 Series Switches
Supported Network Resource Management Components for Cisco Catalyst 2950 Series Switches
Cisco Catalyst 3550 Series Switches
Supported Network Element for Cisco Catalyst 3550 Series Switches
Supported Software Version for Cisco Catalyst 3550 Series Switches
Supported Modules for Cisco Catalyst 3550 Series Switches
Supported Technologies on Cisco Catalyst 3550 Series Switches
Supported Topologies for Cisco Catalyst 3550 Series Switches
Supported Network Resource Management Components for Cisco Catalyst 3550 Series Switches
Cisco Catalyst 4500 Series Switches
Supported Network Element for Cisco Catalyst 4500 Series Switches
Supported Software Version for Cisco Catalyst 4500 Series Switches
Supported Modules for Cisco Catalyst 4500 Series Switches
Supported Technologies on Cisco Catalyst 4500 Series Switches
Supported Topologies for Cisco Catalyst 4500 Series Switches
Supported Network Resource Management Components for Cisco Catalyst 4500 Series Switches
Cisco Catalyst 6500 Series Switches
Supported Network Element for Cisco Catalyst 6500 Series Switches
Supported Software Version for Cisco Catalyst 6500 Series Switches
Supported Modules for Cisco Catalyst 6500 Series Switches
Supported Technologies on Cisco Catalyst 6500 Series Switches
Supported Topologies for Cisco Catalyst 6500 Series Switches
Supported Network Resource Management Components for Cisco Catalyst 6500 Series Switches
Supported Cisco Switches
This section lists all supported Cisco switches:
• Cisco Catalyst 2950 Series Switches
• Cisco Catalyst 3550 Series Switches
• Cisco Catalyst 4500 Series Switches
• Cisco Catalyst 6500 Series Switches
Cisco Catalyst 2950 Series Switches
This section contains:
• Supported Network Element for Cisco Catalyst 2950 Series Switches
• Supported Software Version for Cisco Catalyst 2950 Series Switches
• Supported Modules for Cisco Catalyst 2950 Series Switches
• Supported Technologies on Cisco Catalyst 2950 Series Switches
• Supported Topologies for Cisco Catalyst 2950 Series Switches
• Supported Network Resource Management Components for Cisco Catalyst 2950 Series Switches
Supported Network Element for Cisco Catalyst 2950 Series Switches
Supported Software Version for Cisco Catalyst 2950 Series Switches
Supported Modules for Cisco Catalyst 2950 Series Switches
Supported Technologies on Cisco Catalyst 2950 Series Switches
The following technologies are supported:
•ARP
•Bridging
•Ethernet
•Ethernet Channel
•IEEE dot1q
•IP
For detailed support on the technologies, see Cisco Active Network Abstraction VNE Reference—Addendum on Cisco.com.
Supported Topologies for Cisco Catalyst 2950 Series Switches
Table 81 Supported Topologies for Cisco Catalyst 2950 Series
Topology Type Topology Discovery Technique Topology Verification Technique Additional InformationPhysical Layer
CDP
CDP
The portS are tested on separate VNEs by checking the VNE management IP.
CDP (Cisco Discovery Protocol) includes any upper layer techniques, such as MAC in Ethernet. In this technique the matching criteria is the CDP neighboring information.
Physical Layer
Static
—
You can create a static link between managed network elements by selecting the two end ports of the network elements. To create a static topological link, select the exact location of the two end ports (at both ends of the link).
For information on creating a Static link, see Cisco Active Network Abstraction 4.0 User and Administration Guide on Cisco.com:
http://www.cisco.com/en/US/products/ps6776/products_user_guide_list.html
Ethernet
MAC address
Ethernet counters
—
MPLS
Not supported
Not supported
—
BGP
Not supported
Not supported
—
Supported Network Resource Management Components for Cisco Catalyst 2950 Series Switches
The following Network Resource Management components support Cisco Catalyst 2950 Series Switches:
• Supported Protocols for Configuration Archive
• Supported Protocols for Network Element Image Management
Supported Protocols for Configuration Archive
Table 82 Supported Protocols for Configuration Archive for Cisco Catalyst 2950 Series
Functionality SNMP Telnet When request is from VNEFetching running configuration
No
Yes
Fetching running configuration timestamp
Yes
No
Fetching startup configuration timestamp
Yes
No
Fetching VLAN1 configuration timestamp
No
Yes
When request is from Configuration Archive applicationFetching the running and startup configuration
Yes
No
Deploying the running and startup configuration
Yes
No
Fetching the VLAN 1 configuration
No
Yes
Deploying the VLAN 1 configuration
No
Yes
1 Supported only for IOS image.
Supported Protocols for Network Element Image Management
Table 83 Supported Protocols for NEIM for Cisco Catalyst 2950 Series
Functionality SNMP TelnetImage analysis and verification
Yes
No
Image distribution
Yes
No
Image activation
No
Yes
Cisco Catalyst 3550 Series Switches
This section contains:
• Supported Network Element for Cisco Catalyst 3550 Series Switches
• Supported Software Version for Cisco Catalyst 3550 Series Switches
• Supported Modules for Cisco Catalyst 3550 Series Switches
• Supported Technologies on Cisco Catalyst 3550 Series Switches
• Supported Topologies for Cisco Catalyst 3550 Series Switches
• Supported Network Resource Management Components for Cisco Catalyst 3550 Series Switches
Supported Network Element for Cisco Catalyst 3550 Series Switches
Supported Software Version for Cisco Catalyst 3550 Series Switches
Supported Modules for Cisco Catalyst 3550 Series Switches
Supported Technologies on Cisco Catalyst 3550 Series Switches
The following technologies are supported:
•ARP
•Bridging
•Ethernet
•Ethernet Channel
•IEEE dot1q
•IP
For detailed support on the technologies, see Cisco Active Network Abstraction VNE Reference—Addendum on Cisco.com.
Supported Topologies for Cisco Catalyst 3550 Series Switches
Table 87 Supported Topologies for Cisco Catalyst 3550 Series
Topology Type Topology Discovery Technique Topology Verification Technique Additional InformationPhysical Layer
CDP
CDP
The ports are tested on separate VNEs by checking the VNE management IP.
CDP (Cisco Discovery Protocol) includes any upper layer techniques, such as MAC in Ethernet. In this technique the matching criteria is the CDP neighboring information.
Physical Layer
Static
—
You can create a static link between managed network elements by selecting the two end ports of the network elements. To create a static topological link, select the exact location of the two end ports (at both ends of the link).
For information on creating a Static link, see Cisco Active Network Abstraction 4.0 User and Administration Guide on Cisco.com:
http://www.cisco.com/en/US/products/ps6776/products_user_guide_list.html
Ethernet
MAC address
Ethernet counters
—
MPLS
Not supported
Not supported
—
BGP
Not supported
Not supported
—
Supported Network Resource Management Components for Cisco Catalyst 3550 Series Switches
The following Network Resource Management components support Cisco Catalyst 3550 Series Switches:
• Supported Protocols for Configuration Archive
• Supported Protocols for Network Element Image Management
Supported Protocols for Configuration Archive
Table 88 Supported Protocols for Configuration Archive for Cisco Catalyst 3550 Series
Functionality SNMP Telnet When request is from VNEFetching running configuration
No
Yes
Fetching running configuration timestamp
Yes
No
Fetching startup configuration timestamp
Yes
No
Fetching VLAN1 configuration timestamp
No
Yes
When request is from Configuration Archive applicationFetching the running and startup configuration
Yes
No
Deploying the running and startup configuration
Yes
No
Fetching the VLAN 1 configuration
No
Yes
Deploying the VLAN 1 configuration
No
Yes
1 Supported only for Cisco IOS image.
Supported Protocols for Network Element Image Management
Table 89 Supported Protocols for NEIM for Cisco Catalyst 3550 Series
Functionality SNMP TelnetImage analysis and verification
Yes
No
Image distribution
Yes
No
Image activation
No
Yes
Cisco Catalyst 4500 Series Switches
This section contains:
• Supported Network Element for Cisco Catalyst 4500 Series Switches
• Supported Software Version for Cisco Catalyst 4500 Series Switches
• Supported Modules for Cisco Catalyst 4500 Series Switches
• Supported Technologies on Cisco Catalyst 4500 Series Switches
• Supported Topologies for Cisco Catalyst 4500 Series Switches
• Supported Network Resource Management Components for Cisco Catalyst 4500 Series Switches
Supported Network Element for Cisco Catalyst 4500 Series Switches
Supported Software Version for Cisco Catalyst 4500 Series Switches
Supported Modules for Cisco Catalyst 4500 Series Switches
Supported Technologies on Cisco Catalyst 4500 Series Switches
The following technologies are supported:
•ARP
•Bridging
•Ethernet
•Ethernet Channel
•IEEE dot1q
•IP
•10 Giga Ethernet
•MPLS
•OSPF
•POS
For detailed support on the technologies, see Cisco Active Network Abstraction VNE Reference—Addendum on Cisco.com.
Supported Topologies for Cisco Catalyst 4500 Series Switches
Table 93 Supported Topologies for Cisco Catalyst 4500 Series
Topology Type Topology Discovery Technique Topology Verification Technique Additional InformationPhysical Layer
CDP
CDP
The ports are tested on separate VNEs by checking the VNE management IP.
CDP (Cisco Discovery Protocol) includes any upper layer techniques, such as MAC in Ethernet. In this technique the matching criteria is the CDP neighboring information.
Physical Layer
Static
—
You can create a static link between managed network elements by selecting the two end ports of the network elements. To create a static topological link, select the exact location of the two end ports (at both ends of the link).
For information on creating a Static link, see Cisco Active Network Abstraction 4.0 User and Administration Guide on Cisco.com:
http://www.cisco.com/en/US/products/ps6776/products_user_guide_list.html
Ethernet
MAC address
Ethernet counters
—
MPLS
Not supported
Not supported
—
BGP
BGP information
BGP information
BGP information includes the local or remote BGP Identifier and autonomous system.
Supported Network Resource Management Components for Cisco Catalyst 4500 Series Switches
The following Network Resource Management components support Cisco Catalyst 4500 Series Switches:
• Supported Protocols for Configuration Archive
• Supported Protocols for Network Element Image Management
Supported Protocols for Configuration Archive
Table 94 Supported Protocols for Configuration Archive for Cisco Catalyst 4500 Series
Functionality SNMP Telnet When request is from VNEFetching running configuration
No
Yes
Fetching running configuration timestamp
Yes
No
Fetching startup configuration timestamp
Yes
No
Fetching VLAN1 configuration timestamp
No
Yes
When request is from Configuration Archive applicationFetching the running and startup configuration
Yes
No
Deploying the running and startup configuration
Yes
No
Fetching the VLAN 1 configuration
No
Yes
Deploying the VLAN 1 configuration
No
Yes
1 Supported only for IOS image.
Supported Protocols for Network Element Image Management
Table 95 Supported Protocols for NEIM for Cisco Catalyst 4500 Series
Functionality SNMP TelnetImage analysis and verification
Yes
No
Image distribution
Yes
No
Image activation
No
Yes
Cisco Catalyst 6500 Series Switches
This section contains:
• Supported Network Element for Cisco Catalyst 6500 Series Switches
• Supported Software Version for Cisco Catalyst 6500 Series Switches
• Supported Modules for Cisco Catalyst 6500 Series Switches
• Supported Technologies on Cisco Catalyst 6500 Series Switches
• Supported Topologies for Cisco Catalyst 6500 Series Switches
• Supported Network Resource Management Components for Cisco Catalyst 6500 Series Switches
Supported Network Element for Cisco Catalyst 6500 Series Switches
Supported Software Version for Cisco Catalyst 6500 Series Switches
Supported Modules for Cisco Catalyst 6500 Series Switches
Supported Technologies on Cisco Catalyst 6500 Series Switches
The following technologies are supported:
•ARP
•Bridging
•Ethernet
•Ethernet Channel
•IEEE dot1q
•IP
•ISIS (With IOS image)
•10 Giga Ethernet
•MPLS
•OSPF
•POS
For detailed support on the technologies, see Cisco Active Network Abstraction VNE Reference—Addendum on Cisco.com.
Supported Topologies for Cisco Catalyst 6500 Series Switches
Table 99 Supported Topologies for Cisco 6500 Series
Topology Type Topology Discovery Technique Topology Verification Technique Additional InformationPhysical Layer
CDP
CDP
The ports are tested on separate VNEs by checking the VNE management IP.
CDP (Cisco Discovery Protocol) includes any upper layer techniques, such as MAC in Ethernet. In this technique the matching criteria is the CDP neighboring information.
Physical Layer
Static
—
You can create a static link between managed network elements by selecting the two end ports of the network elements. To create a static topological link, select the exact location of the two end ports (at both ends of the link).
For information on creating a Static link, see Cisco Active Network Abstraction 4.0 User and Administration Guide on Cisco.com:
http://www.cisco.com/en/US/products/ps6776/products_user_guide_list.html
Ethernet
MAC address
Ethernet counters
—
MPLS
IP information
IP information
—
BGP
BGP information
BGP information
BGP information includes the local or remote BGP Identifier and autonomous system.
Supported Network Resource Management Components for Cisco Catalyst 6500 Series Switches
The following Network Resource Management components support for Cisco Catalyst 4500 Series Switches:
• Supported Protocols for Configuration Archive
• Supported Protocols for Network Element Image Management
Supported Protocols for Configuration Archive
Table 100 Supported Protocols for Configuration Archive for Cisco Catalyst 6500 Series
Functionality SNMP Telnet When request is from VNEFetching running configuration
No
Yes
Fetching running configuration timestamp
Yes
No
Fetching startup configuration timestamp
Yes
No
Fetching VLAN1 configuration timestamp
No
Yes
When request is from Configuration Archive applicationFetching the running and startup configuration
Yes
No
Deploying the running and startup configuration
Yes
No
Fetching the VLAN 1 configuration
No
Yes
Deploying the VLAN 1 configuration
No
Yes
1 Supported only for IOS image.
Supported Protocols for Network Element Image Management
Table 101 Supported Protocols for NEIM for Cisco Catalyst 6500 Series
Functionality SNMP TelnetImage analysis and verification
Yes
No
Image distribution
Yes
No
Image activation
No
Yes
Posted: Tue Sep 25 04:30:43 PDT 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.