|
|
Table Of Contents
Release Notes for Cisco ONS 15540 ESP and Cisco ONS 15540 ESPx IOFPGA Functional Image Release 1.25
Determining the Release Version of Your Processor Card IOFPGA Functional Image
Caveat Symptoms and Workarounds
Obtaining Technical Assistance
Release Notes for Cisco ONS 15540 ESP and Cisco ONS 15540 ESPx IOFPGA Functional Image Release 1.25
Date: September 23, 2002
Cisco ONS 15540 ESP and Cisco ONS 15540 ESPx processor card (product number 15540-CPU) IOFPGA functional image release 1.25
Text Part Number: OL-3325-01 Rev. A0
This document describes the features and caveats for the IOFPGA functional image, release 1.25, for the processor cards used with the Cisco ONS 15540 ESP and Cisco ONS 15540 ESPx.
Contents
This release note includes the following sections:
•
Caveat Symptoms and Workarounds
•
Introduction
The Cisco ONS 15540 ESP and Cisco ONS 15540 ESPx are optical transport platforms that employ DWDM (dense wavelength division multiplexing) technology. With the Cisco ONS 15540 ESP, users can take advantage of the availability of dark fiber to build a common infrastructure that supports data, SAN (storage area network) and TDM (time-division multiplexing) traffic. The single-mode transponder module converts the client signal to an ITU wavelength. The client interface on a single-mode transponder line card is protocol transparent and bit-rate transparent, and accepts single-mode client signals on the 1310-nm wavelength through an SC connector.
Determining the Release Version of Your Processor Card IOFPGA Functional Image
This section describes the process you use to determine the existing functional image release version installed on your processor card.
To display the functional image version in a processor card, use the following command in EXEC mode:
show hardware linecard slot
Displays the detailed hardware information including the functional image release version.
The version appears in the Functional Image Version field in the show hardware linecard command output.
Example
The following example shows the functional image release version for a processor card:
Switch# show hardware linecard 6--------------------------------------------------------------------------------Slot Number : 6/*Controller Type : 0x1000On-Board Description : Queens_CPU_PHASE_0Orderable Product Number: N/ABoard Part Number : 73-5621-02Board Revision : 03Serial Number : CAB0431BCU8Manufacturing Date : 02/16/2001Hardware Version : 2.3RMA Number : 0x00RMA Failure Code : 0x00Functional Image Version: 1.25 (dec), 1.19 (hex)For information on updating functional images, refer to the Cisco ONS 15540 ESPx Software Upgrade Guide or the Cisco ONS 15540 ESP Software Upgrade Guide.
Caveat Symptoms and Workarounds
This section describes the caveat symptoms and workarounds for this release of the IOFPGA functional image.
•
Symptom: The processor card LEDs indicate that a CPU is in an active state but it is not responsive.
Recover the processor card by removing it from the shelf and reinserting it.
Workaround: None.
Related Documentation
Refer to the following documents for more information about the Cisco ONS 15540 ESP:
•
•
•
•
•
•
•
Refer to the following documents for more information about the Cisco ONS 15540 ESPx:
•
•
•
•
•
•
•
Obtaining Documentation
These sections explain how to obtain documentation from Cisco Systems.
World Wide Web
You can access the most current Cisco documentation on the World Wide Web at this URL:
Translated documentation is available at this URL:
http://www.cisco.com/public/countries_languages.shtml
Documentation CD-ROM
Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM package, which is shipped with your product. The Documentation CD-ROM is updated monthly and may be more current than printed documentation. The CD-ROM package is available as a single unit or through an annual subscription.
Ordering Documentation
You can order Cisco documentation in these ways:
•
http://www.cisco.com/cgi-bin/order/order_root.pl
•
http://www.cisco.com/go/subscription
•
Documentation Feedback
You can submit comments electronically on Cisco.com. In the Cisco Documentation home page, click the Fax or Email option in the "Leave Feedback" section at the bottom of the page.
You can e-mail your comments to bug-doc@cisco.com.
You can submit your comments by mail by using the response card behind the front cover of your document or by writing to the following address:
Cisco Systems
Attn: Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883We appreciate your comments.
Obtaining Technical Assistance
Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain online documentation, troubleshooting tips, and sample configurations from online tools by using the Cisco Technical Assistance Center (TAC) Web Site. Cisco.com registered users have complete access to the technical support resources on the Cisco TAC Web Site.
Cisco.com
Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information, networking solutions, services, programs, and resources at any time, from anywhere in the world.
Cisco.com is a highly integrated Internet application and a powerful, easy-to-use tool that provides a broad range of features and services to help you with these tasks:
•
•
•
•
•
If you want to obtain customized information and service, you can self-register on Cisco.com. To access Cisco.com, go to this URL:
Technical Assistance Center
The Cisco Technical Assistance Center (TAC) is available to all customers who need technical assistance with a Cisco product, technology, or solution. Two levels of support are available: the Cisco TAC Web Site and the Cisco TAC Escalation Center.
Cisco TAC inquiries are categorized according to the urgency of the issue:
•
•
•
•
The Cisco TAC resource that you choose is based on the priority of the problem and the conditions of service contracts, when applicable.
Cisco TAC Web Site
You can use the Cisco TAC Web Site to resolve P3 and P4 issues yourself, saving both cost and time. The site provides around-the-clock access to online tools, knowledge bases, and software. To access the Cisco TAC Web Site, go to this URL:
All customers, partners, and resellers who have a valid Cisco service contract have complete access to the technical support resources on the Cisco TAC Web Site. The Cisco TAC Web Site requires a Cisco.com login ID and password. If you have a valid service contract but do not have a login ID or password, go to this URL to register:
http://www.cisco.com/register/
If you are a Cisco.com registered user, and you cannot resolve your technical issues by using the Cisco TAC Web Site, you can open a case online by using the TAC Case Open tool at this URL:
http://www.cisco.com/tac/caseopen
If you have Internet access, we recommend that you open P3 and P4 cases through the Cisco TAC Web Site.
Cisco TAC Escalation Center
The Cisco TAC Escalation Center addresses priority level 1 or priority level 2 issues. These classifications are assigned when severe network degradation significantly impacts business operations. When you contact the TAC Escalation Center with a P1 or P2 problem, a Cisco TAC engineer automatically opens a case.
To obtain a directory of toll-free Cisco TAC telephone numbers for your country, go to this URL:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
Before calling, please check with your network operations center to determine the level of Cisco support services to which your company is entitled: for example, SMARTnet, SMARTnet Onsite, or Network Supported Accounts (NSA). When you call the center, please have available your service agreement number and your product serial number.
Posted: Mon Dec 6 19:06:04 PST 2004
All contents are Copyright © 1992--2004 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.