Table of Contents
Index
- 10/100/1000 ports
- cable lengths 2-6
- connecting to 2-33 to 2-36
- connectors and cables B-3
- described 1-7
- illustrated 1-6
- 10/100 ports
- cable lengths 2-6
- connecting to 2-33 to 2-36
- connectors and cables B-1 to B-2
- described 1-6 to 1-7
- illustrated 1-3
- 1000BASE-SX ports
- cable lengths 2-6
- connecting to 2-37 to 2-38
- connectors and cables B-4 to B-5
- described 1-8
- illustrated 1-5
- power levels, fiber-optic A-4
- 1000BASE-T GBIC modules
- cable lengths 2-6
- connecting to 2-41 to 2-42
- connectors B-5
- described 1-9
- illustrated 2-21
- installing 2-20
- 1000BASE-X GBIC modules
- cable lengths 2-6
- connecting to 2-39 to 2-40
- connectors B-5
- described 1-8
- illustrated 2-21
- installing 2-20
- 100BASE-FX ports
- cable lengths 2-6
- connecting to 2-37 to 2-38
- connectors and cables B-4 to B-5
- described 1-8
- illustrated 1-4
- power levels, fiber-optic A-4
- AC power
- connecting to 2-22
- connector 1-22
- specifications A-1 to A-2
- adapter pinouts, terminal
- RJ-45-to-DB-25 B-11
- RJ-45-to-DB-9 B-10
- addresses, assigning IP 2-45
- agency approvals A-4, A-5
- altitude A-1 to A-3
- autonegotiation
- 10/100/1000 ports 1-7
- 10/100 ports 1-7
- bandwidth utilization 1-17 to 1-20
- brackets
- See mounting brackets, attaching
- cable guide, attaching 2-19
- cables
- 10/100/1000 ports 1-7
- 10/100 ports 1-6 to 1-7
- crossover
- connecting to B-2, B-3
- four twisted-pair pinout, 10/100 ports B-8
- four twisted-pair pinout, 1000BASE-T ports B-9
- two twisted-pair pinout B-7
- GBIC
- 1000BASE-T module 2-41
- 1000BASE-X module 2-39
- CWDM module 2-38
- GigaStack module 2-42
- MT-RJ 1-8
- problems, solving 3-3 to 3-4
- rollover B-12
- straight-through
- connecting to B-2, B-3
- four twisted-pair pinout, 10/100 ports B-8
- four twisted-pair pinout, 1000BASE-T ports B-9
- two twisted-pair pinout B-7
- twisted-pair
- 10/100/1000 ports 1-7
- 10/100 ports 1-6 to 1-7
- See also connectors and cables
- Catalyst 2950G-24-EI-DC service warning 2-23, C-23 to C-24
- cautions, defined xvi
- chassis warnings
- against stacking 2-2, C-19 to C-20
- rack-mounting, servicing 2-9, C-6 to C-10
- Cisco IE2100 1-24
- Cisco IE2100 Series Configuration Registrar
- See Cisco IE2100
- Cisco Intelligent Engine 2100
- See Cisco IE2100
- CiscoView 1-24
- Class 1 laser product warning 2-4, C-21
- clearance 2-7
- CLI 1-24
- Cluster Builder application 1-23
- Cluster Management Suite
- See CMS
- Cluster Manager application 1-23
- Cluster View application 1-23
- CMS
- Cluster Builder 1-23
- Cluster Management 1-23
- Cluster View 1-23
- described 1-23
- Device Manager 1-23
- Coarse Wave Division Multiplexing GBIC modules
- See CWDM GBIC modules
- command-line interface
- See CLI
- configuration examples, network 1-1
- configuring ports 2-45
- connecting
- to 10/100/1000 ports 2-33 to 2-36
- to 10/100 ports 2-33 to 2-36
- to 1000BASE-SX ports 2-37 to 2-38
- to 1000BASE-T GBIC module ports 2-41
- to 1000BASE-X GBIC module ports 2-39 to 2-40
- to 100BASE-FX ports 2-37 to 2-38
- to AC power 2-22
- to console port 2-43 to 2-45
- to CWDM GBIC module ports 2-38
- to DC power 2-23 to 2-32
- to GBIC module ports 2-38 to 2-43
- to GigaStack GBIC module ports 2-42
- to PC 2-43 to 2-45
- to RPS 2-22
- to terminal 2-43 to 2-45
- connection procedures 2-33 to 2-45
- connectivity problems, solving 3-4
- connectors and cables
- 10/100/1000 ports B-3
- 10/100 ports B-1 to B-2
- 1000BASE-SX ports B-4 to B-5
- 1000BASE-T GBIC module ports B-5
- 1000BASE-X GBIC module ports B-5
- 100BASE-FX ports B-4 to B-5
- console port B-6
- GigaStack GBIC module ports B-6
- power
- AC 1-22
- DC 1-22
- RPS 1-23
- See also cables
- console port
- adapter pinouts
- RJ-45-to-DB-25 terminal B-11
- cable, rollover B-12
- connecting to 2-43 to 2-45, B-10 to B-11
- default characteristics 2-43
- illustrated 1-21 to 1-22
- RJ-45-to-DB-9 adapter cable pinouts B-10
- conventions, document xvi to xix
- crossover cable
- connecting to
- 10/100/1000 ports 2-34
- 10/100 ports 2-34
- 1000BASE-T GBIC module ports 2-41
- connectivity problems 3-4
- pinout
- four twisted-pair, 10/100 ports B-8
- four twisted-pair, 1000BASE-T ports B-9
- two twisted-pair B-7
- CWDM GBIC modules
- cable lengths 2-6
- connecting to 2-38
- described 1-9
- installing 2-20
- DC power
- connecting to 2-23 to 2-32
- connector 1-22
- specifications A-3
- warnings 2-23, 2-24, 2-26
- DC power disconnection warning 2-26, C-26
- default characteristics of the console port 2-43
- desk-mounting 2-20
- Device Manager 1-23
- dimensions A-2 to A-3
- documentation
- ordering xxi
- related publications xix to xx
- URLs, Cisco xx
- document conventions xvi to xix
- duplex LED 1-14, 1-17
- electrical noise, avoiding 2-7
- electromagnetic interface (EMI) A-4
- EMC
- agency approvals A-4
- regulatory statements 2-4 to 2-6
- EMC regulatory statements 2-4 to 2-6
- environmental ranges A-1 to A-3
- Ethernet cable warning 2-23, C-25 to C-26
- examples, network configuration 1-1
- exposed DC power wire warning 2-29, C-29 to C-30
- fan problems, solving 3-5
- features 1-1 to 1-3
- feedback to Cisco Systems, web xxi
- fiber-port specifications A-4
- front panel
- 10/100/1000 ports 1-7
- 10/100 ports 1-6 to 1-7
- 1000BASE-SX ports 1-8
- 100BASE-FX ports 1-8
- clearance 2-7
- described 1-3
- GBIC module ports 1-8 to 1-9
- illustrated 1-3 to 1-6
- LEDs 1-9 to 1-12
- full-duplex LED 1-17
- GBIC modules
- cable lengths 2-6
- cables
- 1000BASE-T B-3
- 1000BASE-X 2-39
- CWDM 2-38
- GigaStack B-6
- connecting to 2-38 to 2-43
- connectors
- 1000BASE-T B-4
- 1000BASE-X B-5
- CWDM 2-38
- GigaStack B-6
- described 1-8 to 1-9
- illustrated
- 1000BASE-T 2-21
- 1000BASE-X 2-21
- GigaStack 2-22
- module slots 1-4 to 1-5
- installing 2-20
- Gigabit Interface Converters
- See GBIC modules
- GigaStack GBIC modules
- cable lengths 2-6
- connecting to 2-42
- connectors and cables B-6
- described 1-9
- illustrated 2-22
- installing 2-20
- ground connection warning 2-3, 2-24, C-15 to C-16
- grounded equipment warning 2-3, 2-24, C-13 to C-14
- half-duplex LED 1-17
- HP OpenView 1-24
- humidity A-1 to A-3
- installation
- cable guide 2-19
- desk-mount 2-20
- guidelines 2-6
- package contents 2-7 to 2-9
- POST 2-32
- power on 2-22
- pre-installation information and guidelines 2-2 to 2-6
- rack-mount 2-9 to 2-20
- shelf-mount 2-20
- table-mount 2-20
- warning 2-2, C-4
- installing GBIC modules 2-20 to 2-22
- IOS command-line interface
- See CLI
- IP address procedures 2-45
- jewelry removal warning 2-3, C-17 to C-18
- laser beam exposure warning 2-4, C-22
- LEDs
- color meanings 1-17 to 1-18
- duplex (DUPLX) 1-14, 1-17
- front panel 1-9 to 1-12
- full-duplex 1-17
- half-duplex 1-17
- interpreting 1-13, 1-17 to 1-18
- port 1-13
- port mode 1-14 to 1-16
- port status 1-13
- RPS 1-13
- speed (SPEED) 1-14, 1-18
- status (STAT) 1-14, 1-17
- system 1-12
- utilization (UTIL) 1-14, 1-17
- lightning activity warning 2-3, C-3
- main disconnecting device warning 2-3, C-5
- management options 1-23 to 1-24
- Mode button 1-14 to 1-16
- mounting
- desk 2-20
- rack 2-9 to 2-20
- shelf 2-20
- table 2-20
- mounting brackets, attaching 2-10 to 2-18
- MT-RJ
- connector B-4
- patch cables 1-8
- network configuration examples 1-1
- noise, electrical 2-7
- no on/off switch warning 2-2, C-12 to C-13
- notes, defined xvi
- obtaining documentation xx to xxii
- overtemperature warning 2-3, C-11 to C-12
- package contents 2-7 to 2-9
- patch cables, MT-RJ 1-8
- PC, connecting to switch 2-43 to 2-45, B-10
- performance problems, solving 3-3
- personnel warning 2-2, C-20 to C-21
- physical dimensions A-2 to A-3
- pinouts
- 10/100/1000 ports B-4
- 10/100 ports B-2
- 1000BASE-T GBIC port B-5
- adapters
- DB-25 B-11
- console port
- DB-25 adapter B-11
- RJ-45-to-DB-9 adapter cable B-10
- crossover cables
- four twisted-pair, 10/100 ports B-8
- four twisted-pair, 1000BASE-T ports B-9
- two twisted-pair B-7
- RJ-45-to-DB-25 terminal adapter B-11
- RJ-45-to-DB-9 adapter cable B-10
- RJ-45-to-DB-9 PC adapter cable B-10
- straight-through cables
- four twisted-pair, 10/100 ports B-8
- four twisted-pair, 1000BASE-T ports B-9
- two twisted-pair B-7
- port
- LEDs 1-9 to 1-12, 1-13
- mode
- changing 1-14 to 1-16
- LEDs 1-9 to 1-12, 1-14 to 1-16
- selecting 1-14 to 1-16
- ports
- See 10/100 ports, 10/100/1000 ports, 100BASE-FX ports, GBIC module ports, and console ports
- POST
- description 2-32
- problems, solving 3-5
- results 2-32
- power
- agency approvals A-5
- connecting to
- AC 2-22
- DC 2-23 to 2-32
- RPS 2-22
- requirements A-1 to A-3
- supply
- AC connector 1-22
- DC connector 1-22
- RPS connector 1-23
- power connectors 1-22 to 1-23
- power on 2-22
- procedures
- connecting to DC power 2-23 to 2-32
- connection 2-33 to 2-45
- installation 2-9 to 2-20
- IP address 2-45
- power on 2-22
- product disposal warning 2-3, C-14 to C-15
- publications, related xix to xx
- qualified personnel warning 2-2, C-20 to C-21
- rack-mounting
- bracket mounting points 2-10 to 2-18
- procedures 2-9 to 2-20
- warning 2-9, C-6 to C-10
- rear panel
- clearance 2-7
- console port connector 1-23
- described 1-20
- illustrated 1-21 to 1-22
- power connectors 1-22 to 1-23
- Redundant Power System
- See RPS
- regulatory statements, EMC 2-4 to 2-6
- related publications xix to xx
- restricted access area warning 2-23, C-24 to C-25
- rollover cable B-12
- RPS
- connecting to 2-22
- connector 1-23
- described 1-23
- LED 1-9, 1-13
- warning 2-3, C-2
- safety agency approvals A-4
- safety warnings 2-2 to 2-4, C-1 to C-31
- service personnel warning 2-2, C-30 to C-31
- shelf-mounting 2-20
- SNMP network management platforms 1-24
- software switch management 1-23 to 1-24
- specifications A-1 to A-5
- speed LED 1-14, 1-18
- stacking the chassis warning 2-2, C-19 to C-20
- status LED 1-14, 1-17
- straight-through cable
- connecting to
- 10/100/1000 ports 2-34
- 10/100 ports 2-34
- 1000BASE-T GBIC module ports 2-41
- connectivity problems 3-4
- pinout
- four twisted-pair, 10/100 ports B-8
- four twisted-pair, 1000BASE-T ports B-9
- two twisted-pair B-7
- SunNet Manager 1-24
- switch, power-on 2-22
- system LED 1-12
- table-mounting 2-20
- technical assistance xxii to xxiv
- technical specifications A-1 to A-5
- Telnet, and accessing the CLI 1-24
- temperature
- operating A-1 to A-3
- warning 2-3, C-11 to C-12
- terminal, connecting to a switch 2-43 to 2-45, B-11
- terminal-emulation software 2-43
- translated warnings C-1 to C-31
- troubleshooting 3-1
- diagnosing problems 3-2 to 3-5
- understanding POST results 3-2
- URLs, Cisco xx
- utilization
- bandwidth 1-17 to 1-20
- LED 1-14, 1-17
- verifying package contents 2-7 to 2-9
- warnings
- DC power 2-23, 2-24, 2-26
- defined xvii to xix
- installation 2-2 to 2-4
- translated C-1 to C-31
Posted: Thu Nov 7 12:20:09 PST 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.