cc/td/doc/product/dsl_prod/c600s
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

About This Manual
Document Objectives
Document Organization
Document Conventions
Obtaining Documentation
Obtaining Technical Assistance

About This Manual


This manual, developed for system managers and network managers, contains information about installing, configuring, and operating the Cisco 600 series customer premises equipment (CPE) devices.

Document Objectives

The objectives of this manual are to describe all initial hardware installation and basic configuration procedures for the Cisco 600 series CPE devices.

Document Organization

This guide is organized into the following chapters and appendixes:

Chapter/
Appendix
Title Topics Covered

Chapter 1

Overview of the Cisco 600 Series

Provides information on functions and features of the Cisco 600 series CPEs.

Chapter 2

Installation Procedures

Describes the installation procedures for the Cisco 600 series CPEs.

Chapter 3

Configuration Procedures for the Cisco 627

Describes the steps for configuring the Cisco 627 for operation. This chapter also describes in detail how Cisco has implemented the Telnet, and Trivial File Transfer Protocol (TFTP) general applications for the Cisco 627.

Chapter 4

Configuration Procedures for the Cisco 633

Describes the steps for configuring the Cisco 633 for operation. This chapter also describes in detail how Cisco has implemented the Telnet, Syslog, and TFTP general applications for the Cisco 633.

Chapter 5

Configuration Procedures for the Cisco 67x CPE Devices

Describes the steps for configuring the Cisco 67x routers for operation. This chapter also describes in detail how Cisco has implemented the Telnet, Syslog, Remote Authentication Dial-In User Service (RADIUS), and TFTP general applications for these CPEs. This applies to the Cisco 673, Cisco 675, Cisco 675e, Cisco 676, Cisco 677, and Cisco 678.

Chapter 6

Troubleshooting

Contains information about known issues and how to resolve them.

Appendix A

Connectors

Provides details on the cables and connectors.

Appendix B

Specifications

Contains a list of physical, interface and operating specifications.

Appendix C

EZ-DSL Microfilter Specifications

Provides details on the EZ-DSL microfilter. This applies to the Cisco 627, Cisco 675, Cisco 675e, Cisco 676, Cisco 677, and Cisco 678 only.

 

Glossary

Provides ADSL technology definitions.

Document Conventions

This publication uses the document conventions listed in Table 1, Table 2, and Table 3.

Table 1   Font Conventions

Convention Definition Sample

Times bold

Text body font used for arguments, commands, keywords, and punctuation that is part of a command that the user enters in text and command environments.

This is similar to the UNIX route command.

Times italic

Text body font used for publication names and for emphasis.

Refer to the Cisco Broadband Operating System UserGuide for further details.

courier

Example font used for screen displays, prompts, and scripts.

Are you ready to continue? [Y]

courier bold

Example font used to indicate what the user enters in examples of command environments.

Login: root

Table 2   Command Syntax Conventions

Convention Definition Sample

vertical bars ( | )

Separate alternative, mutually exclusive elements

offset-list {in | out} offset

square brackets ([ ])

Indicate optional elements

[no] offset-list {in | out} offset

braces ({ })

Indicate a required choice

offset-list {in | out} offset

braces within square brackets ([{ }])

Indicate a required choice within an optional element

[{letter/number}Enter]

boldface

Indicates commands and keywords that are entered literally as shown

[no] offset-list {in | out} offset

italics

Indicate arguments for which you supply values

Note In contexts that do not allow italics, arguments are enclosed in angle brackets (< >).

 

offset-list {in | out} offset

Table 3   Note, Timesaver, Tip, Caution, and Warning Conventions

Convention Description

Note

Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.

Timesaver

Means the described action saves time. You can save time by performing the action described in the paragraph.

 

Caution

Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

 

Warning

Means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, you must be aware of the hazards involved with electrical circuitry and familiar with standard practices for preventing accidents. To see translated versions of warnings, refer to the Regulatory Compliance and Safety Information document that accompanied the device.

Obtaining Documentation

World Wide Web

You can access the most current Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

Documentation CD-ROM

Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM is updated monthly. Therefore, it is probably more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.

Ordering Documentation

Registered CCO users can order the Documentation CD-ROM and other Cisco Product documentation through our online Subscription Services at http://www.cisco.com/cgi-bin/subcat/kaojump.cgi.

Nonregistered CCO users can order documentation through a local account representative by calling Cisco's corporate headquarters (California, USA) at 408 526-4000 or, in North America, call 800 553-NETS (6387).

Obtaining Technical Assistance

Cisco provides Cisco Connection Online (CCO) as a starting point for all technical assistance. Warranty or maintenance contract customers can use the Technical Assistance Center. All customers can submit technical feedback on Cisco documentation using the web, e-mail, a self-addressed stamped response card included in many printed docs, or by sending mail to Cisco.

Cisco Connection Online

Cisco continues to revolutionize how business is done on the Internet. Cisco Connection Online is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.

CCO's broad range of features and services helps customers and partners to streamline business processes and improve productivity. Through CCO, you will find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online support services, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.

Customers and partners can self-register on CCO to obtain additional personalized information and services. Registered users may order products, check on the status of an order and view benefits specific to their relationships with Cisco.

You can access CCO in the following ways:

You can e-mail questions about using CCO to cco-team@cisco.com.

Technical Assistance Center

The Cisco Technical Assistance Center (TAC) is available to warranty or maintenance contract customers who need technical assistance with a Cisco product that is under warranty or covered by a maintenance contract.

To display the TAC web site that includes links to technical support information and software upgrades and for requesting TAC support, use www.cisco.com/techsupport.

To contact by e-mail, use one of the following:

Language E-mail Address

English

tac@cisco.com

Hanzi (Chinese)

chinese-tac@cisco.com

Kanji (Japanese)

japan-tac@cisco.com

Hangul (Korean)

korea-tac@cisco.com

Spanish

tac@cisco.com

Thai

thai-tac@cisco.com

In North America, TAC can be reached at 800 553-2447 or 408 526-7209. For other telephone numbers and TAC e-mail addresses worldwide, consult the following web site: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.

Documentation Feedback

If you are reading Cisco product documentation on the World Wide Web, you can submit technical comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco.

You can e-mail your comments to bug-doc@cisco.com.

To submit your comments by mail, for your convenience many documents contain a response card behind the front cover. Otherwise, you can mail your comments to the following address:

Cisco Systems, Inc.
Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate and value your comments.


hometocprevnextglossaryfeedbacksearchhelp
Posted: Thu Jun 12 11:26:22 PDT 2003
All contents are Copyright © 1992--2003 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.