The 12-in-1 V.35 Data Terminal Equipment (DTE) serial connector connects to a 5-in-1 V.35 Data Communications Equipment (DCE) serial port on a Cisco router.
LAN Interface
LAN Interface
626
627
633
673
675
675e
676
677
678
RJ-45 connector, ATM-25
¸
¸
RJ-45 connector, 10Base-T/100Base-TX Ethernet, half-duplex, compliant with IEEE 802.3 and 802.3u
¸
¸
¸
¸
¸
RJ-45 connector, 10Base-T/100Base-TX Ethernet, half-duplex/full-duplex, compliant with IEEE 802.3 and 802.3u
¸
Management Interface
RJ-45 connector
Baud rate: 9600 to 38400 Kbps
Data bits: 8
Parity: none
Stop bits: 1
Flow control: none
ADSL/SDSL Interface
RJ-11 Connector/Encoding
626
627
633
673
675
675e
676
677
678
DMT Issue 1 encoding
¸
¸
DMT Issue 2 encoding
¸
¸
¸
SDSL, 2B1Q encoding
¸
¸
CAP encoding
¸
¸
¸
G.Lite encoding
¸
¸
¸
Phone/Microfilter Interface (Cisco 675 and Cisco 678)
RJ-11 connector with built-in EZ-DSL microfilter (North American version only) (Cisco 675)
RJ-11 connector (Cisco 678)
Software Upgrade
Built-in Flash ROM
Power and Operating Requirements
Power Requirements
5 VDC @ 1.5 Amp
Operating Requirements
Temperature: 32\xb0 to 104\xb0 F (0\xb0 to 40\xb0 C)
Humidity: 5 to 90% (non-condensing)
SDSL 2B1Q Transmission Specifications (Cisco 633 and Cisco 673)
Table B-1 shows the SDSL 2B1Q transmission specifications for the Cisco 633 and Cisco 673.
Table B-1 SDSL 2B1Q Transmission Specifications
Specification
Downstream
Upstream
Maximum Transmit Power
13.5 dBm
13.5 dBm
Maximum Rate
1168 kbps
1168 kbps
Spectrum
DC-2.92 MHz
DC-2.92 MHz
Bandwidth
2.92 MHz
2.92 MHz
CAP RADSL Transmission Specifications (Cisco 675, Cisco 675e and Cisco 678)
Table B-2 shows the CAP RADSL transmission specification.
