cc/td/doc/product/dsl_prod/6400
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Preface
 Document Objectives
 Related Documentation
 Audience
 Organization
 Conventions
 Obtaining Documentation
 Obtaining Technical Assistance

Preface

This chapter describes the objectives, organization, and audience of this guide, as well as conventions and related documentation.

Document Objectives

The purpose of this guide is to help you set up your Cisco 6400 carrier-class broadband aggregator with a basic configuration and connectivity among the Cisco 6400 components. For external connectivity and information on deploying the many features supported by the Cisco 6400, see the Cisco 6400 Feature Guide for your software release.

Related Documentation

To complement the software information provided in this guide, refer to the following documents:

Document Description

Cisco 6400 Feature Guide

Lists the features supported by the Cisco 6400, provides references to cross-platform feature documentation, and describes deployment of features that are unique to the Cisco 6400.

Cisco 6400 Command Reference

Describes commands that are unique to the Cisco 6400 command-line interface (CLI).

ATM Switch Router Software Configuration Guide

Describes additional ATM features and functionality that are supported by the Cisco 6400 node switch processor (NSP).

ATM and Layer 3 Switch Router Command Reference

Describes additional commands supported by the Cisco 6400 NSP.

Cisco IOS Configuration Guides and Command References

Describes extensive Cisco IOS features and commands that apply to the Cisco 6400.

Audience

This guide is designed for the system administrator who will be responsible for setting up the Cisco IOS software on the Cisco 6400. The system administrator should be familiar with the installation of high-end networking equipment.

This guide is intended primarily for the following audiences:

Organization

The Cisco 6400 Software Setup Guide is organized into the following chapters and appendixes:

Chapter 1

Product Overview

Describes the Cisco 6400 system and network management options.

Chapter 2

Basic NSP Configuration

Describes how to perform basic configuration for the NSP.

Chapter 3

Basic NRP Configuration

Describes how to perform basic configuration for the NRP-1, NRP-2, and NRP-2SV.

Chapter 4

Node Line Card Interface Configuration

Describes how to manually configure the ATM interfaces for the NLCs.

Chapter 5

Redundancy and SONET APS Configuration

Describes how to configure redundancy among the NSP, NRP, and NLC components.

Chapter 6

SNMP, RMON, and Alarm Configuration

Describes how to use SNMP, RMON, and alarms on the Cisco 6400.

Appendix A

Web Console

Describes how to install and use the Web Console application.

Appendix B

Upgrading Software on the Cisco 6400

Describes how to upgrade software images on the Cisco 6400.

Appendix C

Optimizing the Number of Virtual Connections on the Cisco 6400

Describes how to optimize the number of virtual connections on the Cisco 6400.

Glossary

—

Defines the acronyms and terms used in this guide.

Conventions

This section describes the following conventions used by this guide:

Command Syntax

Descriptions of command syntax use the following conventions:

Convention Description

boldface

Indicates commands and keywords that are entered literally as shown.

italics

Indicates arguments for which you supply values; in contexts that do not allow italics, arguments are enclosed in angle brackets (< >).

[x]

Keywords or arguments that appear within square brackets are optional.

{x | y | z}

A choice of required keywords (represented by x, y, and z) appears in braces separated by vertical bars. You must select one.

[x {y | z}]

Braces and vertical bars within square brackets indicate a required choice within an optional element. You do not need to enter the optional element. If you do, you have some required choices.

Examples

Examples use the following conventions:

Convention Description
screen

Shows an example of information displayed on the screen.

boldface screen

Shows an example of information that you must enter.

< >

Nonprinting characters, such as passwords, appear in angled brackets.

!

Exclamation points at the beginning of a line indicate a comment line. Exclamation points are also displayed by the Cisco IOS software for certain processes.

[ ]

Default responses to system prompts appear in square brackets.

prompt>
prompt#

Examples that contain system prompts denote interactive sessions, indicating the commands that you should enter at the prompt. The system prompt indicates the current level of the EXEC command interpreter. For example, the prompt router> indicates that you should be at the user level, and the prompt router# indicates that you should be at the privileged level. Access to the privileged level usually requires a password.

Keyboard

This guide uses the following conventions for typing keys:

Convention Description

Z

Keys are indicated in capital letters but are not case sensitive.

^ or Ctrl

Represents the Control key. For example, when you read ^D or Ctrl-D, you should hold down the Control key while you press the D key.

Notes, Timesavers, Tips, Cautions, and Warnings

The following conventions are used to attract the reader's attention:

Note   Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.
TimeSaver Means the described action saves time. You can save time by performing the action described in the paragraph.
Tip Means the following information might help you solve a problem.
Caution   Means reader be careful. You are capable of doing something that might result in equipment damage or loss of data.
Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance and Safety Information document that accompanied this device.

Obtaining Documentation

The following sections provide sources for obtaining documentation from Cisco Systems.

World Wide Web

You can access the most current Cisco documentation on the World Wide Web at the following sites:

Documentation CD-ROM

Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM is updated monthly and may be more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.

Ordering Documentation

Cisco documentation is available in the following ways:

http://www.cisco.com/cgi-bin/order/order_root.pl

http://www.cisco.com/go/subscription

Documentation Feedback

If you are reading Cisco product documentation on the World Wide Web, you can submit technical comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco.

You can e-mail your comments to bug-doc@cisco.com.

To submit your comments by mail, for your convenience many documents contain a response card behind the front cover. Otherwise, you can mail your comments to the following address:

Cisco Systems, Inc.
Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate your comments.

Obtaining Technical Assistance

Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com registered users, additional troubleshooting tools are available from the TAC website.

Cisco.com

Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.

Cisco.com provides a broad range of features and services to help customers and partners streamline business processes and improve productivity. Through Cisco.com, you can find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online technical support, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.

Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefits specific to their relationships with Cisco.

To access Cisco.com, go to the following website:

http://www.cisco.com

Technical Assistance Center

The Cisco TAC website is available to all customers who need technical assistance with a Cisco product or technology that is under warranty or covered by a maintenance contract.

Contacting TAC by Using the Cisco TAC Website

If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to the TAC website:

http://www.cisco.com/tac

P3 and P4 level problems are defined as follows:

In each of the above cases, use the Cisco TAC website to quickly find answers to your questions.

To register for Cisco.com, go to the following website:

http://www.cisco.com/register/

If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following website:

http://www.cisco.com/tac/caseopen

Contacting TAC by Telephone

If you have a priority level 1(P1) or priority level 2 (P2) problem, contact TAC by telephone and immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following website:

http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml

P1 and P2 level problems are defined as follows:


hometocprevnextglossaryfeedbacksearchhelp
Posted: Mon Jun 23 14:17:07 PDT 2003
All contents are Copyright © 1992--2003 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.