|
|
July 10, 2000
The CLEI code labels on one or more Cisco 6260 power entry modules (PEMs) at your site may contain an error. This package contains corrected replacement labels. This document tells you how to attach the label(s) to the hardware.
The Common Language Equipment Identifier (CLEI) code on the label is a tracking tool for maintenance and inventory. If you use CLEI codes to track equipment, it is important that you put the corrected labels on your PEMs.
The error is found on Cisco 6260 PEMs shipped before June 1, 2000. On the affected CLEI labels, the first letter of the CLEI code is wrong:
Incorrect CLEI code | BMP1D00CAA |
Correct CLEI code | DMP1D00CAA |
Step 2 Attach a new CLEI label to any PEM whose CLEI label is incorrect. Apply the new label so that it covers the old one. See Figure 1.
You can find the most current documentation on Cisco Connection Online (CCO). These electronic documents may contain updates made after the hard copy documents were printed. You can access CCO in the following ways:
 |
Note If you are a network administrator and need personal technical assistance with a Cisco product that is under warranty or covered by a maintenance contract, contact the Cisco Technical Assistance Center (TAC) at 800 553-2447, 408 526-7209, or tac@cisco.com. To obtain general information about Cisco Systems, Cisco products, or upgrades, contact 800 553-6387, 408 526-7208, or cs-rep@cisco.com. |
Copyright © 2002, Cisco Systems, Inc.
All rights reserved.
Posted: Wed Jul 24 20:00:10 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.