Table Of Contents

The SCA Reporter as a Tool in the SCA BB Console

How to Use the SCA Reporter Tool in the SCA BB Console

The SCA Reporter as a Tool in the SCA BB Console

---

This appendix describes the Cisco Service Control Application Reporter (SCA Reporter) as a tool in the SCA BB Console. For more information about the SCA BB Console, see the Cisco Service Control Application for Broadband User Guide .

• How to Use the SCA Reporter Tool in the SCA BB Console 

How to Use the SCA Reporter Tool in the SCA BB Console

The SCA Reporter can be run as a tool in the SCA BB Console.

SUMMARY STEPS

1. Choose Start >All Programs >Cisco SCA >SCA BB Console 3.1.0 >SCA BB Console 3.1.0.

2. Configure and activate a database connection. (See "Getting Started".)

3. From the Console main menu, choose Tools>Reporter.

4. You use the Reporter tool in the same way that you use the SCA Reporter as a standalone, as described in this manual.

DETAILED STEPS

---

Step 1 Choose Start >All Programs >Cisco SCA >SCA BB Console 3.1.0 >SCA BB Console 3.1.0.

The SCA BB Console opens.

Figure C-1

Step 2 Configure and activate a database connection. (See Getting Started.)

Step 3 From the Console main menu, choose Tools>Reporter.

The Reporter tool opens.

Figure C-2

Step 4 You use the Reporter tool in the same way that you use the SCA Reporter as a standalone, as described in this manual.

Figure C-3

---

Posted: Thu May 31 02:33:30 PDT 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.