|
|
$ dollar sign metacharacter 2-154
* wildcard character 2-130
.pac file 2-128
action 2-151
Address Resolution Protocol (ARP) 2-161
archive transaction log file 2-281
asset tag command syntax 2-2
local 2-3
TACACS+ 2-3
authentication cache 2-185
size adjustments 2-75
authentication command syntax 2-3
authentication traffic bypass 2-13
autosense command syntax 2-5
bandwidth command syntax 2-6
begin scheduled preload operation 2-126
block rule action 2-152
altered addresses 2-11
content routing 2-163
logging 2-10
memory data 2-10
boomerang command syntax 2-7
boomerang log-dump command syntax 2-10
boomerang send-packet command syntax 2-11
browser auto-configuration 2-205
bypass and WCCP Version 2 2-13
bypass command syntax 2-12
bypass static 2-14
file system 2-168
monitor and record 2-36
performance impact 2-39
cache command syntax 2-16
cdp command syntax 2-17
cfs command syntax 2-19
changing initial network device configuration settings 2-95
changing the primary interface 2-127
Cisco Discovery Protocol (CDP) 2-166
Cisco Technical Assistance Center (TAC) 2-235
clear command syntax 2-21
clear 2-25
display system 2-170
hardware 2-25
save 2-25
set 2-25
set summer daylight saving 2-26
set UTC 2-27
synchronize 2-118
time zone 2-26
clock command syntax 2-25, 2-26
modes 1-2
syntax 1-4
command-line processing 1-1
domain configuration 1-9
EXEC 1-6
global configuration 1-9
interface configuration 1-16
configure command syntax 2-30
caching HTTP objects 2-71
Cisco Discovery Protocol 2-17
CISCO-ENTITY-ASSETT-MIB 2-2
Content Engine as a media proxy 2-142
Content Engine IP interface 2-94
Content Engine network name 2-66
Content Engine RTSP proxy redirector 2-142
content fetch and preload 2-121
disk 2-44
DNS cache 2-46
Fast Ethernet or Gigabit Ethernet 2-92
FTP caching 2-58
full-duplex interface 2-62
half-duplex interface 2-64
HTTPS proxy 2-83
Internet Cache Protocol (ICP) 2-86
IP address interface 2-94
Lightweight Directory Access Protocol (LDAP) 2-98
maximum time interval to WCCP shutdown 2-315
multicast client options 2-112
Network Time Protocol (NTP) 2-118
NT LAN Manager (NTLM) parameters 2-116
primary interface 2-127
RADIUS parameters 2-133
RealSubscriber parameters 2-135
router list for WCCP Version 2 2-311
RTSP proxy 2-142
rules 2-147
static bypass lists 2-12
static IP routing 2-97
system logging 2-105
TACACS+ server parameters 2-269
TCP/IP FTP 2-89
TCP/IP RCP 2-89
TCP/IP TFTP 2-89
Transmission Control Protocol (TCP) parameters 2-271
Trivial File Transfer Protocol (TFTP) server directory 2-276
URL filtering 2-292
WCCP Version 1 router IP address 2-305
WCCP Version 2 dynamic services 2-308
Windows Media Technology (WMT) 2-323
Coordinated Universal Time (UTC) 2-25
a file 2-35
configuration or image data 2-31
copy command syntax 2-31
cpfile command syntax 2-35
CPU or memory processes 2-202
a directory 2-110
a new file 2-111
swfs and mediafs partitions 2-142
customized blocking message 2-295
custom web cache 2-302
debug command syntax 2-36
IP default domain name 2-97
IP default gateway 2-97
SNMP security model group 2-256
SNMP server user 2-262
SNMP Version 2 MIB view 2-263
a directory tree 2-41
a file 2-40
IP default gateway 2-97
delfile command syntax 2-40
deltree command syntax 2-41
depth parameter 2-123
dir command syntax 2-42
command syntax 2-43
custom message 2-295
debugging functions 2-291
TCP/IP FTP 2-89
TCP/IP RCP 2-89
TCP/IP TFTP 2-89
disk command syntax 2-44
a file 2-287
current user name 2-322
divide WMT and RealProxy cache 2-109
dns-cache command syntax 2-46
DNS cache status 2-173
dnslookup command syntax 2-47
document objectives xi
domain configuration mode 1-3
domain rule pattern 2-154
downloading proxy automatic configuration file 2-128
DSCP rule action 2-152
dst-ip rule pattern 2-154
dst-port rule pattern 2-154
dynamic traffic bypass 2-13
downgrade 2-48
file system 2-175
IP address 2-49
port number 2-49
state 2-174
ecdn cdm command syntax 2-49
ecdn command syntax 2-48
autosense 2-5
boomerang 2-7
browser automatic configuration 2-129
Content Engine to service RealPlayer clients 2-144
DHCP services 2-127
dynamic authentication bypass 2-12
dynamic WCCP redirection services 2-312
error handling 2-54
GUI 2-63
ICP server 2-87
RCP 2-89
Real-Time Streaming Protocol (RTSP) 2-142
rule processing 2-151
slow start capability of Cisco Cache software 2-316
SNMP agent 2-252
SNMP traps 2-254
SSH daemon 2-265
TCP/IP FTP 2-89
TCP/IP RCP 2-89
TCP/IP TFTP 2-89
Telnet services 2-274
transaction logs 2-278
transparent error handling 2-12
transparent redirection of RTSP traffic 2-143
transparent RTSP RealProxy service 2-143
trusted host 2-286
WCCP flow redirection 2-304
WCCP redirected HTTP traffic 2-302
WCCP redirected RTSP traffic 2-306
WCCP Version 2 reverse proxy service 2-309
enable command syntax 2-50
end command syntax 2-51
error-handling command syntax 2-52
browser-generated messages 2-53
incoming proxy server 2-53
RealProxy error codes 2-106
transparent 2-53
WCCP Version 1 2-53
WCCP Version 2 2-53
exception debug command syntax 2-54
excluding RADIUS domains 2-134
command summary 1-6
mode 1-2
exec-timeout command syntax 2-55
exit command syntax 2-56
exit global configuration mode 2-51
exporting transaction logs 2-282
external-ip command syntax 2-57
force preload 2-126
force the timeout of a nonresponsive host 2-120
force transparently 2-130
forwarding HTTP, HTTPS, and FTP proxy-style requests 2-130
freshness-factor rule action 2-152
active mode 2-60
caching 2-178
passive mode 2-60
proxy 2-60
ftp command syntax 2-58
fullduplex command syntax 2-62
generate SSH host key 2-264
commands 1-9
mode 1-3
global exclusion from proxy forwarding 2-130
graphical user interface 2-63, 2-179
Greenwich mean time (GMT) 2-27
gui-server command syntax 2-63
halfduplex command syntax 2-64
halt and cold restart 2-137
hardware interface status 2-189
hardware status 2-180
header-field rule pattern 2-154
command syntax 2-65
system 1-5
hierarchical caching 2-74, 2-101
hostname command syntax 2-66
host SNMP trap 2-258
caching parameters 2-182
expiration date 2-71
proxy failover 2-77
http command syntax 2-67
considerations 2-72
excluding domains 2-72
https command syntax 2-83
HTTPS proxy status 2-186
icp command syntax 2-86
inetd command syntax 2-89
install command, changes to 2-91
install command syntax 2-89, 2-91
installing software 2-90, 2-91
backup 2-266
bandwidth 2-6
command syntax 2-92
identifiers 2-93
interface configuration mode 1-3
Internet Cache Protocol (ICP) 2-187
ip address command, changes to 2-94
IP routing table 2-190
keystroke combinations, CLI 1-1
LDAP authentication 2-72
cache size 2-102
proxy mode 2-99
redundancy 2-102
transparent mode 2-100
Websense URL filtering 2-101
ldap command syntax 2-98
Lightweight Directory Access Protocol (LDAP) 2-191
link beat detected 2-127
list file 2-123
lls command syntax 2-104
local time 2-27
logging command syntax 2-105
ls command syntax 2-108
mediafs partitions 2-142
system file system 2-268
media file system 2-194
mediafs-division command syntax 2-109
memory blocks and statistics 2-195
mime-type rule pattern 2-154
mkdir command syntax 2-110
mkfile command syntax 2-111
domain configuration 1-3
EXEC 1-2
global configuration 1-3
interface configuration 1-3
multicast client 2-196
multicast-client command syntax 2-112
N2H2 URL filtering 2-296
negate interface command 2-113
Network Address Translation 2-57
parameters 2-198
system clock 2-118
no-auth rule action 2-152
no-cache rule action 2-153
no command syntax 2-113, 2-114
no-proxy rule action 2-153
NT LAN Manager (NTLM) parameters 2-197
authentication support 2-72
HTTP request authentication 2-116
ntlm server command syntax 2-116
ntp command syntax 2-118
ntpdate command syntax 2-119
NVRAM 2-152
offset from UTC 2-27
online help 2-65
outgoing proxy exclude status 2-206
overload bypass 2-14
pattern 2-152
persistent storage of rules 2-152
ping command syntax 2-120
pre-load command syntax 2-121
preload configuration 2-200
pre-load force command syntax 2-126
preload time intervals 2-123
pre-positioned E-CDN media content 2-175
primary-interface command syntax 2-127
privileged level EXEC commands
accessing 2-50
disabling 2-43
summary 1-6
proxy-auto-config command syntax 2-128, 2-129
proxy automatic configuration file 2-128
proxy failover 2-77
proxy mode 2-313
LDAP authentication 2-72
proxy-protocols command syntax 2-130
pwd command syntax 2-132
RADIUS 2-101
RADIUS authentication 2-101, 2-133
RADIUS server 2-207
radius-server command syntax 2-133
RealProxy log file 2-106
real-subscriber command syntax 2-135
RealSubscriber configuration and license 2-208
Real-Time Streaming Protocol (RTSP) 2-209
reboot Content Engine 2-137
redirected RTSP traffic 2-142
redirect rule action 2-153
refresh rule action 2-153
reload command syntax 2-137
reload site lists 2-299
remove the IP default domain name 2-97
removing data from Flash memory 2-140
removing disk partitions 2-140
removing user data from disk 2-140
rename a file 2-139
rename command syntax 2-139
reset rule action 2-153
resolve a host or domain name 2-47
restore syntax command 2-140
restore to default condition 2-140
rewrite rule action 2-153
rmdir command syntax 2-138
rotated log file 2-107
rtsp proxy command syntax 2-142
rule action 2-151
rule command syntax 2-147
rule limit 2-152
rule pattern 2-151
rules configuration 2-210
order of executing actions 2-155
order of executing patterns 2-155
running configuration 2-213
running web cache service with WCCP Version 2 2-318
running web cache service with WCCP WMT 2-320
save configuration changes 1-5
save file system contents 2-137
Secure Shell (SSH) status 2-219
selective-cache 2-153
send echo packets (PING) 2-120
services 2-215
clock 2-26
rules 2-147
SNMP community 2-252
SNMP server contact string 2-253
SNMP system location string 2-260
SNMP system notify string 2-261
show arp command syntax 2-161
show authentication command syntax 2-162
show boomerang command syntax 2-163
show bypass command syntax 2-164
show cdp command syntax 2-166
show cfs command syntax 2-168
show cfs volumes command, changes to 2-168
show clock command syntax 2-170
show command summary 1-17
show debugging 2-171
show debugging command syntax 2-171
show disks command syntax 2-172
show dns-cache command syntax 2-173
show ecdn command syntax 2-174
show ecdnfs volumes command syntax 2-175
show error-handling command syntax 2-176
show flash command syntax 2-177
show ftp command syntax 2-178
show gui-server command syntax 2-179
show hardware command syntax 2-180
show hosts command syntax 2-181
show http command syntax 2-182
show https command syntax 2-186
show icp command syntax 2-187
show inetd command syntax 2-188
show interface command syntax 2-189
show ip routes command syntax 2-190
show logging command syntax 2-193
show mediafs command syntax 2-194
show memory command syntax 2-195
show multicast-client command syntax 2-196
show ntlm command syntax 2-197
show ntp command syntax 2-198
show pre-load command syntax 2-200
show processes command syntax 2-202
show proxy-auto-config command syntax 2-205, 2-206
show proxy-protocols 2-206
show radius-server command syntax 2-207
show real-subscriber command syntax 2-208
show rtsp command syntax 2-209
show rule command syntax 2-210
show running-config command syntax 2-213
show services command syntax 2-215
show snmp 2-217
show ssh command syntax 2-219
show standby command syntax 2-220
show startup-config command syntax 2-221
show statistics command syntax 2-223
show sysfs command syntax 2-217, 2-232
show tacacs command syntax 2-233
show tcp command syntax 2-234
show tech-support command syntax 2-235
show telnet command syntax 2-239
show tftp-server command syntax 2-240
show transaction-logging command syntax 2-241
show trusted-host command syntax 2-243
show url-filter command syntax 2-244
show user command syntax 2-245
show users command syntax 2-246
show version command syntax 2-247
show wccp 2-249
show wccp command syntax 2-248
show wmt command syntax 2-250
shutdown command syntax 2-251
shut down hardware interface 2-251
snmp-server community command syntax 2-252
snmp-server contact command syntax 2-253
snmp-server enable traps command syntax 2-254
snmp-server group command syntax 2-256
snmp-server host command syntax 2-258
snmp-server location command syntax 2-260
snmp-server notify command syntax 2-261
snmp-server user command syntax 2-262
snmp-server view command syntax 2-263
specifying a domain name 2-130
specify version of WCCP 2-317
src-ip rule pattern 2-154
sshd command syntax 2-265
ssh-key-generate command syntax 2-264
standby command syntax 2-266
standby interface 2-220
startup configuration 2-221
start WMT multicast stations 2-329
state of debugging option 2-171
statistics 2-223
status of SNMP 2-217
stop a preload 2-126
stop WMT multicast stations 2-329
synchronize the cfs 2-16
sysfs command syntax 2-268
configuring 2-105
priority level mapping to RealProxy error codes 2-106
system file system 2-232
system help 1-5
system message log 2-193
tacacs command syntax 2-269
tcp command syntax 2-271
TCP configuration 2-234
telnet enable command syntax 2-274
Telnet services 2-239
Terminal Access Controller Access Control System (TACACS+) authentication 2-233
terminal command syntax 2-275
tftp-server command syntax 2-276, 2-277
time-stamp evaluation data 2-140
time zone offset 2-27
transaction log 2-277
transaction-log force 2-277
transaction logging 2-102
after authentication using LDAP 2-75
transaction-logs command syntax 2-278
transparent error reporting 2-53
hierarchical caching in 2-74, 2-101
LDAP authentication 2-73, 2-100
requests 2-313
Trivial File Transfer Protocol (TFTP) server 2-240
trusted host 2-243
trusted-host command syntax 2-286
type command syntax 2-287
type-tail command syntax 2-288
undebug command syntax 2-291
undo a global configuration command 2-114
unmounting a volume 2-20
URL filter 2-244
url-filter command syntax 2-292
url-filter local-list-reload command syntax 2-299
URL list 2-123
url-regex rule pattern 2-154
url-regsub rule pattern 2-154
use-proxy-failover 2-153
use-proxy rule action 2-153
local 2-3
TACACS+ 2-3
user information 2-245
user level EXEC commands 1-6
username authentication 2-300
username command syntax 2-300
users 2-246
use-server rule action 2-153
UTC 2-25
UTC current time 2-27
version information 2-247
view Content Engine hosts 2-181
view files 2-42
view list of files 2-108
view log file 2-288
view long list of directory names 2-104
view present working directory 2-132
wccp custom-web-cache command syntax 2-302
wccp flow-redirect command syntax 2-304
wccp home-router command syntax 2-305
WCCP information 2-248
wccp media-cache command syntax 2-306
wccp port-list command syntax 2-308
wccp reverse-proxy command syntax 2-309
wccp router-list command syntax 2-311
wccp service-number command syntax 2-312
wccp shutdown command syntax 2-315
wccp slow-start command syntax 2-316
wccp version command syntax 2-317
wccp web-cache command syntax 2-318
wccp wmt command syntax 2-320
Websense URL filtering 2-297
whoami command syntax 2-322
Windows Media Technology (WMT) 2-250
multicast in and multicast out 2-327
multicast in and unicast out 2-327
unicast in and multicast out 2-326
wmt command syntax 2-323, 2-329
write command syntax 2-330
write running configurations to memory 2-330
Posted: Wed May 14 13:43:50 PDT 2003
All contents are Copyright © 1992--2003 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.