About This Manual

This preface describes the objectives, audience, organization, and conventions of the
Cisco MGX 8250 Multiservice Gateway Command Reference.

Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more current than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback in the toolbar, select Documentation, and click Enter the feedback form. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.

Objectives

This publication provides instructions for using the MGX 8250 commands in the command line interface.

Audience

The Cisco MGX 8250 Multiservice Gateway Command Reference provides installers, operators, network designers and managers with the necessary understanding to install MGX 8250 switches.

Organization

The body of this publication is:


Chapter 1	MGX 8250 Command Line Interface Provides a list of commands for the common equipment cards and the service modules for the Cisco MGX 8250 wide area edge switch.

Related Documentation

The following Cisco publications contain additional information related to the operation of the Cisco WAN switching network:

MGX 8250 Release 1.0 Related Documentation	Documentation Description
Cisco MGX 8250 Multiservice Gateway Installation and Configuration Release 1.0 DOC-7810924=	Provides installation instructions for the 8250 multiservice gateway.
Cisco MGX 8250 Multiservice Gateway Error Messages Release 1.0 DOC-7810923=	Provides error message descriptions and recovery procedures.
Cisco BPX 8600 Series Installation and Configuration Release 9.2 DOC-786326=	Provides installation instructions for the BPX broadband switch.
Cisco BPX 8600 Series Reference Release 9.2 DOC-786325=	Provides a general description and technical details of the BPX broadband switch.
Cisco IGX 8400 Series Installation and Configuration Release 9.2 DOC-786723=	Provides installation instructions for the IGX multiband switch.
Cisco IGX 8400 Series Reference Release 9.2 DOC-786736=	Provides a general description and technical details of the IGX multiband switch.
Cisco WAN Switching Command Reference Release 9.2 DOC-786721=	Provides detailed information on the general command line interface commands.
Cisco WAN Switching SuperUser Command Reference Release 9.2 DOC-786722=	Provides detailed information on the command line interface commands requiring SuperUser access authorization.
WAN CiscoView for the IGX 8400 Switches Release 2.0 DOC-786541=	Provides instructions for using WAN CiscoView for the IGX 8400.
WAN CiscoView for the BPX 8600 Switches Release 2.0 DOC-786539=	Provides instructions for using WAN CiscoView for the BPX 8600.
Cisco WAN Manager Installation for Solaris Release 9.2 DOC-78=785875=	Provides procedures for installing Release 9.2 of the Cisco WAN Manager (CWM) network management system on Solaris systems.
Cisco WAN Manager Operations Release 9.2 DOC-785876=	Provides procedures for operating Release 9.2 of the Cisco WAN Manager (CWM) network management system.
Cisco WAN Manager SNMP Service Agent Release 9.2 DOC-785878=	Provides information about the Cisco WAN Manager Simple Network Management Protocol (SNMP) Service Agent components and capabilities.
Cisco WAN Manager Database Interface Release 9.2 DOC-785877=	Provides the information to gain direct access to the Cisco WAN Manager Informix OnLine database that is used to store information about the elements within your network.

Conventions

This publication uses the following conventions to convey instructions and information.

Command descriptions use these conventions:

Commands and keywords are in boldface.
Arguments for which you supply values are in italics.
Required command arguments are inside angle brackets (< >).
Optional command arguments are in square brackets ([ ]).
Alternative keywords are separated by vertical bars ( | ).

Examples use these conventions:

Terminal sessions and information the system displays are in screen font.
Information you enter is in boldface screen font.
Nonprinting characters, such as passwords, are in angle brackets (< >).
Default responses to system prompts are in square brackets ([ ]).

Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.

Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, you must be aware of the hazards involved with electrical circuitry and familiar with standard practices for preventing accidents. (To see translated versions of this warning, refer to the Regulatory Compliance and Safety Information document that accompanied the product.)

Cisco Connection Online

Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.

Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.

CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously: a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.

You can access CCO in the following ways:

WWW: http://www.cisco.com
WWW: http://www-europe.cisco.com
WWW: http://www-china.cisco.com
Telnet: cco.cisco.com
Modem: From North America, 408 526-8070; from Europe, 33 1 64 46 40 82. Use the following terminal settings: VT100 emulation; databits: 8; parity: none; stop bits: 1; and connection rates up to 28.8 kbps.

For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.

Note If you are a network administrator and need personal technical assistance with a Cisco product that is under warranty or covered by a maintenance contract, contact Cisco's Technical Assistance Center (TAC) at 800 553-2447, 408 526-7209, or tac@cisco.com. To obtain general information about Cisco Systems, Cisco products, or upgrades, contact 800 553-6387, 408 526-7208, or cs-rep@cisco.com.

Table of Contents