cc/td/doc/product/wanbu/igx8400/9_3_30
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Preface
Objectives
Audience
Organization
Document Conventions
New or Changed Information
Related Documentation
Accessing User Documentation
Obtaining Documentation
Obtaining Technical Assistance
Obtaining Additional Publications and Information
Where to Go Next

Preface


This preface discusses the objectives, audience, organization, and conventions found in the Cisco IGX 8400 Series Provisioning Guide.

The Cisco IGX 8400 series (referred to as "IGX" in this guide) is a WAN switch platform running Cisco WAN Switching System Software Release 9.3.30 or later releases (referred to as "switch software" in this guide).

Objectives

This guide replaces previous Cisco IGX 8400 series platform documentation and is designed to be used with multiple switch software releases. This guide has been optimized for online usage. If you are accessing this guide through the Documentation CD-ROM, external links may not be accessible.

For information on initial installation and power-on, refer to the Cisco IGX 8400 Series Installation Guide.

For detailed information on system configuration and troubleshooting commands, refer to the Cisco WAN Switching Command Reference .

For more information on Cisco IOS configuration and troubleshooting commands, refer to the appropriate Cisco IOS documentation set.

Audience

The Cisco IGX 8400 Series Provisioning Guide provides installers, operators, and network designers and managers with the necessary understanding to plan for IGX usage in a network. This guide applies to the Cisco IGX 8410, Cisco IGX 8420, and Cisco IGX 8430 in both rack-mount and standalone versions.

Organization

This document is organized into the following chapters:

Table 1   Cisco IGX 8400 Series Provisioning Guide Organization

Chapter Number and Title Chapter Description

Chapter 1, "Introduction to the Cisco IGX 8400 Series"

Provides general networking and functional information on the Cisco IGX 8400 Series.

Chapter 2, "Cisco IGX 8400 Series Cards"

Provides information on IGX modules (front cards and back cards).

Chapter 3, "Cisco IGX 8400 Series Nodes"

Provides information on IGX node setup and management.

Chapter 4, "Cisco IGX 8400 Series Trunks"

Provides information on IGX trunk setup and management.

Chapter 5, "Cisco IGX 8400 Series Lines"

Provides information on IGX line setup and management.

Chapter 6, "Cisco IGX 8400 Series Data Service"

Provides configuration and troubleshooting information specific to IGX data services.

Chapter 7, "Cisco IGX 8400 Series Voice Service"

Provides configuration and troubleshooting information specific to IGX voice services.

Chapter 8, "Cisco IGX 8400 Series ATM Service"

Provides configuration and troubleshooting information specific to IGX ATM services.

Chapter 9, "Cisco IGX 8400 Series Frame Relay Service"

Provides configuration and troubleshooting information specific to IGX Frame Relay services.

Chapter 10, "Cisco IGX 8400 Series IP Service"

Provides configuration and troubleshooting information specific to IGX-URM MPLS services.

Appendix A, "Cisco IGX 8400 Series Feeder Nodes"

Provides information on using the IGX as a feeder node.


Tip Some links in this online document connect with other Cisco documentation resources, such as Cisco IOS documentation, or the Cisco WAN Switching Software Command Reference . When you find the information you are looking for, use the back button on your web browser to return to this document.

Document Conventions

This publication uses the following conventions to convey instructions and information.

Table 2   Document Conventions

Convention Description

boldface font

Commands and keywords.

italic font

Variables for which you supply values.

[      ]

Keywords or arguments that appear within square brackets are optional.

{x | y | z}

A choice of required keywords appears in braces separated by vertical bars. You must select one.

screen font

Examples of information displayed on the screen.

boldface screen font

Examples of information you must enter.

<    >

Nonprinting characters, for example passwords, appear in angle brackets in contexts where italic font is not available.

[    ]

Default responses to system prompts appear in square brackets.


Note   This symbol means reader take note. Notes contain helpful suggestions or references to additional information and material.


TimeSaver This symbol means the described action saves time. You can save time by performing the action described in the paragraph.


Caution   This symbol means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.


Tip This symbol means the following information will help you solve a problem. The tips information might not be troubleshooting or even an action, but could be useful information, similar to a Timesaver.


Warning 


IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. To see translations of the warnings that appear in this publication, refer to the translated safety warnings that accompanied this device.

Note:  SAVE THESE INSTRUCTIONS

Note:  This documentation is to be used in conjunction with the specific product installation guide that shipped with the product. Please refer to the Installation Guide, Configuration Guide, or other enclosed additional documentation for further details.

Waarschuwing

BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Voor een vertaling van de waarschuwingen die in deze publicatie verschijnen, dient u de vertaalde veiligheidswaarschuwingen te raadplegen die bij dit apparaat worden geleverd.

Opmerking  BEWAAR DEZE INSTRUCTIES.

Opmerking  Deze documentatie dient gebruikt te worden in combinatie met de installatiehandleiding voor het specifieke product die bij het product wordt geleverd. Raadpleeg de installatiehandleiding, configuratiehandleiding of andere verdere ingesloten documentatie voor meer informatie.

Varoitus

TÄRKEITÄ TURVALLISUUTEEN LIITTYVIÄ OHJEITA

Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä vaaroista ja tavanomaisista onnettomuuksien ehkäisykeinoista. Tässä asiakirjassa esitettyjen varoitusten käännökset löydät laitteen mukana toimitetuista ohjeista.

Huomautus  SÄILYTÄ NÄMÄ OHJEET

Huomautus  Tämä asiakirja on tarkoitettu käytettäväksi yhdessä tuotteen mukana tulleen asennusoppaan kanssa. Katso lisätietoja asennusoppaasta, kokoonpano-oppaasta ja muista mukana toimitetuista asiakirjoista.

Attention

IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant causer des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers posés par les circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions d'avertissements figurant dans cette publication, consultez les consignes de sécurité traduites qui accompagnent cet appareil.

Remarque  CONSERVEZ CES INFORMATIONS

Remarque  Cette documentation doit être utilisée avec le guide spécifique d'installation du produit qui accompagne ce dernier. Veuillez vous reporter au Guide d'installation, au Guide de configuration, ou à toute autre documentation jointe pour de plus amples renseignements.

Warnung

WICHTIGE SICHERHEITSANWEISUNGEN

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu einer Körperverletzung führen könnte. Bevor Sie mit der Arbeit an irgendeinem Gerät beginnen, seien Sie sich der mit elektrischen Stromkreisen verbundenen Gefahren und der Standardpraktiken zur Vermeidung von Unfällen bewusst. Übersetzungen der in dieser Veröffentlichung enthaltenen Warnhinweise sind im Lieferumfang des Geräts enthalten.

Hinweis  BEWAHREN SIE DIESE SICHERHEITSANWEISUNGEN AUF

Hinweis  Dieses Handbuch ist zum Gebrauch in Verbindung mit dem Installationshandbuch für Ihr Gerät bestimmt, das dem Gerät beiliegt. Entnehmen Sie bitte alle weiteren Informationen dem Handbuch (Installations- oder Konfigurationshandbuch o. Ä.) für Ihr spezifisches Gerät.

Figyelem!

FONTOS BIZTONSÁGI ELÕÍRÁSOK

Ez a figyelmezetõ jel veszélyre utal. Sérülésveszélyt rejtõ helyzetben van. Mielõtt bármely berendezésen munkát végezte, legyen figyelemmel az elektromos áramkörök okozta kockázatokra, és ismerkedjen meg a szokásos balesetvédelmi eljárásokkal. A kiadványban szereplõ figyelmeztetések fordítása a készülékhez mellékelt biztonsági figyelmeztetések között található.

Megjegyzés  ÕRIZZE MEG EZEKET AZ UTASÍTÁSOKAT!

Megjegyzés  Ezt a dokumentációt a készülékhez mellékelt üzembe helyezési útmutatóval együtt kell használni. További tudnivalók a mellékelt Üzembe helyezési útmutatóban (Installation Guide), Konfigurációs útmutatóban (Configuration Guide) vagy más dokumentumban találhatók.

Avvertenza

IMPORTANTI ISTRUZIONI SULLA SICUREZZA

Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Per le traduzioni delle avvertenze riportate in questo documento, vedere le avvertenze di sicurezza che accompagnano questo dispositivo.

Nota  CONSERVARE QUESTE ISTRUZIONI

Nota  La presente documentazione va usata congiuntamente alla guida di installazione specifica spedita con il prodotto. Per maggiori informazioni, consultare la Guida all'installazione, la Guida alla configurazione o altra documentazione acclusa.

Advarsel

VIKTIGE SIKKERHETSINSTRUKSJONER

Dette varselssymbolet betyr fare. Du befinner deg i en situasjon som kan forårsake personskade. Før du utfører arbeid med utstyret, bør du være oppmerksom på farene som er forbundet med elektriske kretssystemer, og du bør være kjent med vanlig praksis for å unngå ulykker. For å se oversettelser av advarslene i denne publikasjonen, se de oversatte sikkerhetsvarslene som følger med denne enheten.

Merk  TA VARE PÅ DISSE INSTRUKSJONENE

Merk  Denne dokumentasjonen skal brukes i forbindelse med den spesifikke installasjonsveiledningen som fulgte med produktet. Vennligst se installasjonsveiledningen, konfigureringsveiledningen eller annen vedlagt tilleggsdokumentasjon for detaljer.

Aviso

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. O utilizador encontra-se numa situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha em atenção os perigos envolvidos no manuseamento de circuitos eléctricos e familiarize-se com as práticas habituais de prevenção de acidentes. Para ver traduções dos avisos incluídos nesta publicação, consulte os avisos de segurança traduzidos que acompanham este dispositivo.

Nota  GUARDE ESTAS INSTRUÇÕES

Nota  Esta documentação destina-se a ser utilizada em conjunto com o manual de instalação incluído com o produto específico. Consulte o manual de instalação, o manual de configuração ou outra documentação adicional inclusa, para obter mais informações.

¡Advertencia!

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Vea las traducciones de las advertencias que acompañan a este dispositivo.

Nota  GUARDE ESTAS INSTRUCCIONES

Nota  Esta documentación está pensada para ser utilizada con la guía de instalación del producto que lo acompaña. Si necesita más detalles, consulte la Guía de instalación, la Guía de configuración o cualquier documentación adicional adjunta.

Varning!

VIKTIGA SÄKERHETSANVISNINGAR

Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Se översättningarna av de varningsmeddelanden som finns i denna publikation, och se de översatta säkerhetsvarningarna som medföljer denna anordning.

OBS!  SPARA DESSA ANVISNINGAR

OBS!  Denna dokumentation ska användas i samband med den specifika produktinstallationshandbok som medföljde produkten. Se installationshandboken, konfigurationshandboken eller annan bifogad ytterligare dokumentation för närmare detaljer.








New or Changed Information

This section describes updates to this publication.

Switch Software Release 9.3.40

The following sections have been added or updated to support Switch Software Release 9.3.40:

Switch Software Release 9.4.00

The following content has been added to support Switch Software Release 9.4.00:

Related Documentation


Tip The universal router module (URM) is a dual-processor card, featuring both a modified Cisco IGX 8400 series UXM-E processor and a modified Cisco 3660 modular-access router processor. Each processor uses a different operating system; refer to documentation for both Cisco IOS software and switch software while working with the URM.

All related technical documentation is available online and on the Documentation CD-ROM. You can also order some printed documentation using the document number. See the "Accessing User Documentation" section and the "Obtaining Documentation" section for more information.

Cisco IGX 8400 Series Documentation

Cisco IGX 8400 series product documentation provides information regarding hardware installation, cabling, basic configuration, and regulatory compliance and safety information. Documentation in this category includes the following:

You can access these documents at Cisco Product Documentation > WAN Switches > IGX 8400 Series.

Or use the following links:

Cisco WAN Switching System Software and Related Hardware Documentation

Cisco WAN Switching System Software Documentation

Cisco WAN Switching System Software (switch software) product documentation provides additional information on the switch software commands used to configure the IGX. Documentation in this category includes the following:

You can access these documents at Cisco Product Documentation > WAN Switches > IGX 8400 > switch software release number.

Related Hardware Documentation

The following documents describe hardware often used in conjunction with the IGX:

You can access the Cisco WAN Interface Cards Hardware Installation Guide at Cisco Product Documentation > Access Servers & Routers > Modular Access Routers > Cisco 3600 Series Routers > Hardware installation documents for Cisco 3600 series > WAN interface card (WIC) installation.

You can access the Cisco BPX 8600 Series Installation and Configuration publication at Cisco Product Documentation > WAN Switches > BPX 8600 Series > switch software release number.

Cisco IOS Software Documentation


Note   Cisco IOS software is available only on the universal router module (URM) front card. Unless you intend to configure the IGX for IP services using the URM, you do not need to refer to Cisco IOS documentation.

Cisco IOS software documentation provides information on using the Cisco IOS software required by the IGX for IP services.


Note   Cisco IOS documentation is organized by Cisco IOS release, then by product type and name.

Determining Platform Support Through Feature Navigator

Cisco IOS software is packaged in feature sets that support specific platforms. To get updated information regarding platform support for this feature, access Feature Navigator. Feature Navigator dynamically updates the list of supported platforms as new platform support is added for the feature.

Feature Navigator is a web-based tool that enables you to quickly determine which Cisco IOS software images support a specific set of features and which features are supported in a specific Cisco IOS image.

To access Feature Navigator, you must have an account on Cisco.com. If you have forgotten or lost your account information, send a blank e-mail to cco-locksmith@cisco.com. An automatic check will verify that your e-mail address is registered with Cisco.com. If the check is successful, account details with a new random password will be e-mailed to you. Qualified users can establish an account on Cisco.com by following the directions at http://www.cisco.com/register .

Feature Navigator is updated regularly when major Cisco IOS software releases and technology releases occur. For the most current information, go to the Feature Navigator home page at the following URL:

http://www.cisco.com/go/fn

Main Cisco IOS Software Documentation Pages by Release

The main Cisco IOS software documentation pages provide links to all software documentation available for the release. Cisco IOS software documentation is classified as outlined in the following sections.

You can access the main Cisco IOS software documentation pages at Cisco Product Documentation > Cisco IOS Software > Cisco IOS Software Release you are using.

Or use the following links:

Master Index to Software Documentation

The Cisco IOS software documentation provides detailed configuration procedures and examples.

You can access these documents at Cisco Product Documentation > Cisco IOS Software > Cisco IOS Software Release you are using > Cisco IOS Release x.x Master Index> Configuration guide or command reference indexes.

Or use the following links:

Configuration Guides

The Cisco IOS software configuration guides provide detailed configuration procedures and examples.

You can access these documents at Cisco Product Documentation > Cisco IOS Software > Cisco IOS Software Release you are using > Configuration Guides and Command References > Configuration guide for your application.

Or use the following links:

Command References

The Cisco IOS software command references provide detailed information about each configuration command.

You can access these documents at Cisco Product Documentation > Cisco IOS Software > Cisco IOS Software Release you are using > Configuration Guides and Command References > Command reference for your application.

Or use the following links:

New Feature Documentation

New Feature Documentation contains detailed information about new configuration commands introduced in specific Cisco IOS releases.

You can access these documents at Cisco Product Documentation > Cisco IOS Software > Cisco IOS Software Release you are using > New Feature Documentation > New Features for the Cisco IOS Software Release you are using.

Or use the following links:

Release Notes

Cisco IOS release notes for all platforms provide up-to-date information about specific Cisco IOS software releases.

You can access these documents at Cisco Product Documentation > Cisco IOS Software Configuration > Cisco IOS Software Release you are using > Release Notes > Release Notes for the Cisco IOS Software Release you are using.

Or use the following links:

Supporting Documents and Related Documentation

Additional documentation provides information about specific Cisco IOS software releases, platforms, and applications, and other supporting documentation.

You can access these documents at Cisco Product Documentation > Cisco IOS Software Configuration > Cisco IOS Software Release you are using > Supporting Documents or Related Documentation.

Or use the following links:

Accessing User Documentation

The following sections provide information on accessing user documentation online or through the included Documentation CD-ROM.

Accessing Online User Documentation

To access online user documentation, you need a desktop or notebook computer with an installed graphical Internet browser and an active connection to the Internet. If you do not have an active Internet connection available, use the Documentation CD-ROM included with this letter to access the product's user documentation (see the "Accessing User Documentation on the Documentation CD-ROM" section).


Step 1   Open your Internet browser.

Step 2   Log in to Cisco.com at http://www.cisco.com .


Note    If you do not have a user account, click Register in the navigational bar at the top of the page and proceed through the registration process.

Step 3   Select Technical Documentation under the Service & Support heading.

Step 4   Select Cisco Product Documentation to open the Cisco Product Documentation index.

Step 5   Use the document paths provided in the "Related Documentation" section to find the specific document you need.



Accessing User Documentation on the Documentation CD-ROM

To access user documentation on the CD-ROM, you need a desktop or notebook computer with an installed graphical Internet browser and a CD-ROM drive.


TimeSaver Follow the Documentation CD-ROM installation instructions found in the CD package before attempting to access user documentation. CD-ROM installation takes approximately 5-10 minutes, depending on your computer and your installation requirements.


Step 1   Insert the Documentation CD (disc 2) into your CD-ROM drive and launch the Documentation CD (CiscoCD).

Step 2   Select Cisco Product Documentation to open the Cisco Product Documentation index.

Step 3   Use the document paths provided in the "Related Documentation" section to find the specific document you need.



Obtaining Documentation

Cisco provides several ways to obtain documentation, technical assistance, and other technical resources. These sections explain how to obtain technical information from Cisco Systems.

Cisco.com

You can access the most current Cisco documentation on the World Wide Web at this URL:

http://www.cisco.com/univercd/home/home.htm

You can access the Cisco website at this URL:

http://www.cisco.com

International Cisco websites can be accessed from this URL:

http://www.cisco.com/public/countries_languages.shtml

Documentation CD-ROM

Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM package, which may have shipped with your product. The Documentation CD-ROM is updated regularly and may be more current than printed documentation. The CD-ROM package is available as a single unit or through an annual or quarterly subscription.

Registered Cisco.com users can order a single Documentation CD-ROM (product number DOC-CONDOCCD=) through the Cisco Ordering tool:

http://www.cisco.com/en/US/partner/ordering/ordering_place_order_ordering_tool_launch.html

All users can order monthly or quarterly subscriptions through the online Subscription Store:

http://www.cisco.com/go/subscription

Ordering Documentation

You can find instructions for ordering documentation at this URL:

http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm

You can order Cisco documentation in these ways:

http://www.cisco.com/en/US/partner/ordering/index.shtml

Documentation Feedback

You can submit comments electronically on Cisco.com. On the Cisco Documentation home page, click Feedback at the top of the page.

You can e-mail your comments to bug-doc@cisco.com.

You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:

Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate your comments.

Obtaining Technical Assistance

Cisco provides Cisco.com, which includes the Cisco Technical Assistance Center (TAC) website, as a starting point for all technical assistance. Customers and partners can obtain online documentation, troubleshooting tips, and sample configurations from the Cisco TAC website. Cisco.com registered users have complete access to the technical support resources on the Cisco TAC website, including TAC tools and utilities.

Cisco.com

Cisco.com offers a suite of interactive, networked services that let you access Cisco information, networking solutions, services, programs, and resources at any time, from anywhere in the world.

Cisco.com provides a broad range of features and services to help you with these tasks:

To obtain customized information and service, you can self-register on Cisco.com at this URL:

http://tools.cisco.com/RPF/register/register.do

Technical Assistance Center

The Cisco TAC is available to all customers who need technical assistance with a Cisco product, technology, or solution. Two types of support are available: the Cisco TAC website and the Cisco TAC Escalation Center. The type of support that you choose depends on the priority of the problem and the conditions stated in service contracts, when applicable.

We categorize Cisco TAC inquiries according to urgency:

Cisco TAC Website

The Cisco TAC website provides online documents and tools to help troubleshoot and resolve technical issues with Cisco products and technologies. To access the Cisco TAC website, go to this URL:

http://www.cisco.com/tac

All customers, partners, and resellers who have a valid Cisco service contract have complete access to the technical support resources on the Cisco TAC website. Some services on the Cisco TAC website require a Cisco.com login ID and password. If you have a valid service contract but do not have a login ID or password, go to this URL to register:

http://tools.cisco.com/RPF/register/register.do

If you are a Cisco.com registered user, and you cannot resolve your technical issues by using the Cisco TAC website, you can open a case online at this URL:

http://www.cisco.com/tac/caseopen

If you have Internet access, we recommend that you open P3 and P4 cases online so that you can fully describe the situation and attach any necessary files.

Cisco TAC Escalation Center

The Cisco TAC Escalation Center addresses priority level 1 or priority level 2 issues. These classifications are assigned when severe network degradation significantly impacts business operations. When you contact the TAC Escalation Center with a P1 or P2 problem, a Cisco TAC engineer automatically opens a case.

To obtain a directory of toll-free Cisco TAC telephone numbers for your country, go to this URL:

http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml

Before calling, please check with your network operations center to determine the Cisco support services to which your company is entitled: for example, SMARTnet, SMARTnet Onsite, or Network Supported Accounts (NSA). When you call the center, please have available your service agreement number and your product serial number.

Obtaining Additional Publications and Information

Information about Cisco products, technologies, and network solutions is available from various online and printed sources.

http://www.cisco.com/en/US/products/products_catalog_links_launch.html

http://www.ciscopress.com

http://www.cisco.com/go/packet

http://www.cisco.com/go/iqmagazine

http://www.cisco.com/en/US/about/ac123/ac147/about_cisco_the_internet_protocol_journal.html

http://www.cisco.com/en/US/learning/le31/learning_recommended_training_list.html

Where to Go Next

For an introduction to the Cisco IGX 8400 series, see Chapter 1, "Introduction to the Cisco IGX 8400 Series."

For installation and basic configuration information, see the Cisco IGX 8400 Series Installation Guide .

For more information on switch software commands, refer to the Cisco WAN Switching Command Reference, Chapter 1, "Command Line Fundamentals ."


hometocprevnextglossaryfeedbacksearchhelp
Posted: Mon May 12 15:32:41 PDT 2003
All contents are Copyright © 1992--2003 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.