Cable Information

This appendix provides information about the DAS Server Shelf AC power cables and includes an illustration of a sample null modem cable.

AC Power Cabling

Cable:	Cisco provides a 6-foot (1.8m), 3-conductor cord with an IEC 320 C-13 appliance coupler for mating with the DAS Server Shelf on the system end. The other end of the power cord should be a grounding-type attachment plug as described in the paragraphs that follow.
Connector:	For North America and Japan: NEMA 5-15 For Continental Europe: CEE 7/7 (Schuko) For Italy: CEI 23-16/VII (16 Amp plug) For United Kingdom and Ireland: BS 1363 For Australia and New Zealand: AS 3112 For those countries not appearing in the preceding list, use a power cord with an IEC 320 C-13 appliance coupler for the system-end and an appropriate grounding-type attachment plug at the other end in accordance with local standards.

Cable:

Cisco provides a 6-foot (1.8m), 3-conductor cord with an IEC 320 C-13 appliance coupler for mating with the DAS Server Shelf on the system end. The other end of the power cord should be a grounding-type attachment plug as described in the paragraphs that follow.

Connector:

For North America and Japan: NEMA 5-15

For Continental Europe: CEE 7/7 (Schuko)

For Italy: CEI 23-16/VII (16 Amp plug)

For United Kingdom and Ireland: BS 1363

For Australia and New Zealand: AS 3112

For those countries not appearing in the preceding list, use a power cord with an IEC 320
C-13 appliance coupler for the system-end and an appropriate grounding-type attachment plug at the other end in accordance with local standards.

Cable

Source-end connector information is not available for all countries, so local codes must be known or obtained by either the customer or installer.

Sample Null Modem Cable

Figure A-1 shows a typical null modem cable. Cisco does not supply this cable.

Figure A-1: Null Modem Cable

Table of Contents