|
|
Cisco MGM MapViewer displays information about Cisco MGX 8000 Series Carrier Voice Gateways, MGX 8000 Series components, and media gateway controllers (MGCs).
Each object shown in the right window provides graphical cues about the network element that it represents. The information can be structural (for example, a network element name), or it can be state and event information (for example, "out of service"). If an object becomes unreachable, it is represented by a bomb icon.
Figure 5-1 shows an example of a typical MapViewer display.
Cisco MGM 2.0 reports Cisco MGX 8000 Series Carrier Voice Gateways as being in one of the following states:
The default is Normal state. However, in some circumstances, you may need to change the node to Maintenance state.
To change the default state of a Cisco MGX 8000 Series gateway, perform the following steps:
Step 2 Click the Viewer button. The Map Viewer screen opens.
Step 3 Click the tree of objects to display the list of sites and nodes.
Step 4 Right-click the icon for the desired site or chassis and select Open CMGMV Chassis State Change Dialog. The Chassis State Change Dialog window opens. (See Figure 5-2.)
Step 5 Select Decommission or Commission from the Chassis State pull-down menu.
 |
Note The default pull-down menu is blank. You must click on the pull-down menu to reveal the available options. |
Step 6 Click Modify Chassis State.
Posted: Thu Aug 8 22:04:33 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.