|
|
This appendix lists the standards and specifications relevant to the Extended Services Processor (ESP) and ATM and Frame Relay Switched Virtual Circuits supported by the BPX Service Node.
It contains the following tables:
| ESP Feature | Specification |
|---|---|
Dimensions | Height: 5.188 inches (3 rack units) |
Processor | 143 MHz CPU |
Power, ESP-AC | Input Voltage: 90 VAC minimum, 120/208 VAC Nominal, 264 VAC Maximum Inrush current, worst case conditions, less than peak amplitude of 30 amperes at 115VAC cold start (250 C) |
Power, ESP-DC | Input Voltage: -40 VDC Minimum, -48 VDC Nominal, -60 VDC Maximum Inrush current, worst case conditions, less that a peak amplitude of 15 amperes at -40 VDC cold start (250 C) |
ATM Network Interface Card | Conforms to IEEE 1496 Support 62.5/125 u Multimode fiber SAR function aligned with ATM Forum specified and International Telecommunications Union -Telecommunication Sector (ITU-TS) approved ATM Adaptation Layer (AAL) 5 Support SONET/SDH (Synchronous Optical NETwork/Synchronous Digital Hierarchy) physical layer framing structure Compatible with relevant emerging standards (including existing ATM Forum baseline specifications and ITU-TS Connector: SC fiber receptacle |
Safety Standards | UL 1950, Third edition (Standard for Safety, Information Technology Equipment, including Electrical Business Equipment CSA C22.2-#950-M95 (Standard for Safety, Information Technology Equipment, Including Electrical Business Equipment EN 60 950 (Safety of Information Technology Equipment, Including Electrical Business Equipment TS001 Austel-Safety Requirements for Customer Equipment. |
Radio Frequency Interference | FCC 47 Par 15, Class B for radiated and conducted emissions EN 55022-A1 (CISPR 22), class B, for radiated and conducted emissions Austel AS 3548, class B, for radiated and conducted emissions |
Noise Immunity | EN 50082-1, Generic Immunity and Susceptibility Standard EN 61000-4-2 (IEC 801-2), Level 4, (8 KV current injection, 15 KV air discharge) ESD EN 61000-4-3 (IEC 801-3, Level 3, Radiated Susceptibility, 10V/m EN 61000-4-4 (IEC 801-4), Level 4, Fast Transients EN610000-4-5 (IEC 801-5), Level 3, (ESP-AC only) Surge immunity EN 61000-4-12, Damped Oscillatory ENV 50140-R.F. immunity at 800 MHz ENV 50141-R.F. immunity at 150 KHz to 80 MHz ENV 50142-Power Surge 10/50 msec Pulse, 2 KVAC Bellcore 1089, Nov. 1994, Issue 1 |
Environmental | As specified by Bellcore TR-NWT-00063 |
| Feature | Specification |
|---|---|
ATM Switched Virtual Circuit | ATM Forum UNI Specification 3.0/3.1 compliant ILMI address registration per ATM Forum UNI Specification 3.1 E.164 & NSAP addressing formats |
Frame Relay Switched Virtual Circuits | Frame Relay Forum Implementation Agreement FRF.4 compliant Traffic parameter mapping per B-ICI 1.1 Appendix A Method 2 Option 2 E.164 addressing format |
Posted: Fri Jan 19 20:24:19 PST 2001
All contents are Copyright © 1992--2001 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.