|
Number of Trunks: | 1 |
Topology: | Depends on application defined by FlashPAK |
Rate: | 9.6, 19.2, 32, 48, 56, 64, 72, 96, 112, |
Interface: | RS-232C/V.24 default |
| Interface Card-1X: V.11 optional |
| Interface Card-3X: V.35 optional |
| Interface Card-4X: RS-449 optional |
| Interface Card-5X: X.50/X.21 optional |
| Interface Card-6X: V.36 optional |
| FRAM-01: V.24 default, V.35, X.21, RS-449 |
Number of Channels: | FASTPAD: 6 (5 Low Speed and 1 High Speed) 3 channels per FRAM-01 Expansion Module installed MICRO: 1 High Speed, 1 Low Speed |
Rate: | High Speed = Up to 64 kbps Low Speed = up to 192. kbps synchronous, 9.6 asynchronous. FRAM-01 Channel = 512 kbps |
Protocol: | High Speed = Transparent or H/SDLC. Low Speed = Asynchronous, Transparent or H/SDLC. |
Interface: | High Speed = RS-232C, V.11/X.21 with Interface Card-1X, V.35 with Interface Card.3X, or RS-449 with Interface Card-4X. Low Speed = RS-232. |
Number of Channels: | Up to 8; Micro - up to 4 |
Voice Channels per Card: | 1 |
Rate: VFC-01 | 8K, 9.6K, 12K, 14.4K or 16 K |
Rate: VFC-03 | 4.8K, 8K, 9.6K, 12K, 14.4K or 16 K |
Interface: | Loop, 4-Wire E&M, or 2-Wire E&M |
Front Panel: | 4 x 20 LCD Display and 6 control buttons |
NMS/ | RS-232 asynchronous |
Power Consumption: | 40W + 5W per voice/fax expansion module |
Redundant Power Supply: | RPSMD, optional (not available on Micro) |
Input Voltage: | 90 to 240 VAC |
Input Frequency: | 50/60 Hz |
Rack Mount Kit: | Optional |
Height: | 5.25" (13.34 cm) |
Width: | 17" (43.18 cm) |
Length: | 18" (45.72 cm) |
Weight: | 30 lbs (13.61 kg) |
Temperature: | 0-50 Degrees Celsius |
Humidity: | 10%-90% noncondensing |
Voice/Fax Modules: | In-Line Voice/Fax Module VFC-01 and VFC-03 |
Fax Support: | Group III at 2.4, 4.8, 7.2, and 9.6 kbps |
Number of Channels: | Up to 8; up to 4 on Micro |
Interface | Loop, 4 wire or 2 wire E&M. |
Posted: Thu Jan 25 13:24:47 PST 2001
All contents are Copyright © 1992--2001 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.