|
This management function may be used to check that the equipment and its links are working properly. It never clears or resets the virtual circuit, transmits no interrupts, and ignores received data, interrupts, and reset packets. It leads to the reset of the counter to zero if a reset packet is received.
The set-up of a call with the Traffic Generator function results in the continuous generation of data packets, with or without echo, and the absorption of the data transmitted by the calling party until a clear is sent.
The packets sent may contain messages of two types:
The contents and distribution period of these packets depend on the ACO No. selected (see next paragraph).
The syntax of the access code is:
ACO | Definition |
"Absent" 00 XX 99 M | The message distribution period is the one defined in the configuration The transmission of the messages is controlled by reception of the computer's internal acknowledge. The message distribution period is equal to XX time 0.1s for the call. Infinite time-out. messages are absorbed but not distributed (absorber). The messages are distributed and displayed (mirror function). |
The text contained in a traffic generator function message is in the following form:
Posted: Thu Jan 25 14:06:57 PST 2001
All contents are Copyright © 1992--2001 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.