Table of Contents
System Configuration
Configuration | System
System Configuration
System configuration means configuring parameters for system-wide functions in the VPN Concentrator.
Configuration | System
Step 1 In the Configuration screen, click the System link. The System screen opens.
Figure 4-1 Configuration | System Screen
This section of the Manager lets you configure parameters for VPN Concentrator system-wide functions.
- Servers: Identifying servers for authentication, accounting, DNS, DHCP, firewall, and NTP.
- Address Management: Assigning addresses to clients as a tunnel is established.
- Tunneling Protocols: Configuring PPTP, L2TP, IPSec LAN-to-LAN connections, Internet Key Exchange (IKE) proposals, and NAT Transparency.
- IP Routing: Configuring static routes, default gateways, OSPF, global DHCP, DHCP Relay, redundancy (VRRP), and Reverse Route Injection (RRI).
- Management Protocols: Configuring and enabling built-in servers for FTP, HTTP/HTTPS, TFTP, Telnet, SNMP, SSL, SSH, and XML.
- Events: Handling system events via logs, FTP backup, SNMP traps, syslog, SMTP, and e-mail.
- General: Identifying the system, setting the time and date, changing the maximum session limit, and configuring global authentication parameters.
- Client Update: Automatically updates client software.
- Load Balancing: Configuring virtual clusters and individual devices within virtual clusters.
See the appropriate chapter in this manual or the online help for each section.
Posted: Fri Apr 18 18:15:01 PDT 2003
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.
