cc/td/doc/product/voice/ata/ataadmn
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Voice Menu Codes

Voice Menu Codes


This section contains a quick-reference list of the voice configuration menu options for the Cisco ATA. For information on the use of the voice menu, see ""Configuring the Cisco ATA for SCCP."

This section contains the following tables:

Table B-1 lists codes to return basic Cisco ATA information.

Table B-1   Cisco ATA Voice Menu Codes—Information Options

Option   Voice Menu Code   Description  

Build information

123123

Build date of the Cisco ATA software

Review IP address

21

Returns IP address of the Cisco ATA

Review MAC address

24

Returns media access control (MAC) address of the Cisco ATA

Review network route IP address

22

Returns IP address of the network route

Review subnet mask

23

Returns subnet mask of the network route

Version number

123

Returns version number of the Cisco ATA software

Table B-2 lists configuration codes. For additional information about these parameters, see ""Parameters and Defaults."

Table B-2   Cisco ATA Voice Menu Codes—Configuration Parameters

Option   Voice Menu Code   Description  

Audio mode

312

Allows finer control of the audio component to suit certain user applications

Caller ID method

316

Specifies the signal format when generating the Caller ID format to use

Connection mode

311

Controls the connection mode of the call signaling protocol

Dynamic Host Configuration Protocol (DHCP)

20

Controls whether the Cisco ATA can automatically obtain configuration parameters from a server over the network

DNS 1 IP

916

IP address of the primary DNS server

DNS 2 IP

917

IP address of the secondary DNS server

Encrypt key

320

Encrypts the configuration file on the TFTP server

Num Tx frames

35

Number of frames transmitted per packet

Static IP address

1

IP address of the Cisco ATA

LBR codec

300

Low-bit-rate codec selection

Media port

202

Specifies which base port the Cisco ATA uses to receive RTP media streams

Static network route address

2

Network router address

NPrintf address

81

IP address of a host to which all Cisco ATA debug messages are sent

Set password

7387277

Configuration interface password

Signal timers

318

Timeout values controlling the starting or stopping of a signaling event

MGCP protocol

38

Selects the signaling protocol

Static subnet mask

10

Specifies the subnet mask for the Cisco ATA

TFTP URL

905

When TFTP configuration is used, IP address of the TFTP server

UDP TOS bits

255

Determines the precedence and delay of UDP IP packets

Use TFTP

305

Enables TFTP as configuration method

Table B-3 lists codes used in the software upgrade process. For information about these codes, see "Appendix , "Upgrading the Cisco ATA Signaling Image."

Table B-3   Cisco ATA Voice Menu Codes—Software Upgrade

Option   Voice Menu Code   Description  

Upgrade software

100

Used in the software process to enter the IP address of the PC

Upgrade language to English

101

When upgrading software, changes or upgrades the voice prompt language to English


hometocprevnextglossaryfeedbacksearchhelp
Posted: Wed Jul 9 16:54:33 PDT 2003
All contents are Copyright © 1992--2003 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.